Source list issue

Dear all
System is not allowing to maintain same vendor with different mpn number in me01.

hi,
you can check the following document and forum it may help you ..
http://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/library/uuid/106f94ee-8dc2-2a10-a485-882871fa5c11?overridelayout=t…
and
Source list for MPN as per Internal Material number
Regards,
mukesh

Similar Messages

Sales Order - Source List Issue ( Help needed)

Hi All...
The user is trying to create a Sales order , but could not do it for a particular Customer and we are getting a error * Source not included in list despite Source List Requirement" and then we are getting an error Incorrect Index Structure for Table XMVERF_PO/.
I tried Checking Source List everything is fine , I dont know what to do ??? Any suggestions from
SD & MM side( I think config shd be fine , Any Master Data Checks ) needs to be taken care.??
The Material is a MTO and once we save it in the Sales Order it creates an PReq automatically.
Please let me know ASAP...
Thanks
Balaji

Hi Charlie...
Thanks for the reply, As u told i didnt check the me05 , do u think Me05 really plays a role ,
because i try testing in QA without Me05 it worked. But in PRD it didnt.
I didnt try now because all the users had left since i dont have that kind of access in PRD..
ANy other suggestion are welcome.....
Thanking u for the support....
Balaji

MPN Material - Source list not included issue

Hi,
I am trying to create a purchase order for a material which has a MPN material # specified in the source list. When I create the purchase order, I get the error "Source not included in list despite source list requirement".
I do not get the error when I remove the MPN material # from the source list.
I looked at MM03 for MPN material # and it looked correct.
Please help.
Nicky

Hi
There are 2 settings for source list requirment mandatory at PO.
1) Material Master record > Purchasing view
2) IMG>MM>Purchasing>Source list>Define at plant level
if the setting is active then you have maintain the source list for that particular material.
if the above setting are not there and still you are getting error then you have to check if any enhancements done .
Hope it helps
Karthik
Edited by: Karthik on Jun 28, 2011 9:56 AM

Can't update/restore after intalling itunes 7.0 or see ipod in source list

I have a complicated issue. I just installed itunes 7.0 and my ipod won't show up in the source list (which had been a problem before with 6.0). Thinking this had to do with my Toshiba laptop, I disabled my high-speed usb port. But one of the later steps (to fix the toshiba problem) is to open the ipod updater and then restore the ipod. I can't do either of these because for some reason my updater is the 6.0 version still and gives me an error saying it's no longer supported and i have to use itunes to update (which I can't). I don't know what to do! I need help!
Toshiba Laptop Windows XP
Toshiba Laptop Windows XP

Hey there
I had issues trying to update my ipod (60g) after upgrading to itunes 7. Finally figured it out!!! I had to disable my Norton internet security - firewall and everything worked fine!!! It took maybe 10-15 mins to update the ipod to version 1.2 - then another 30 minutes to upload all my podcasts. I have no idea why it uploaded each one. Almost like during the update to version 1.2 - my podcasts (only the podcasts) were deleted and then reloaded again. Weird!!!
SO... hopefully you have a firewall that you can disable for about maybe 30 mins - just enough time to let the ipod update then you should be good. took me 4 friggin days to figure this one out!!!!
Hope this helps!!

Creation Info Record at Material group,Source List & Assign source to PR

Hi All,
Mine is a typical requirement, I would like to create a Info Record at Material Group level and create Source list for the Material & Plant combination. Now for this combination, I would like to create PR & assign source for this PR.
Completed at my end:
1. Creation of Info Record at Material Group level
2. Maintained Source List at Material level.
Issues/ Errors:
1. Info Record does not exist for the combination of Material & Vendor combination (which is true & I do not want it also)
2. Material differs from the Material from the Info Record.
Help / Information required :
1. Setting MRP relevant "1" for the Source List and for checking the field "Fix".
2. Assigning the Source in PR (in ME57)*Can anyone provide solution to the above
Can anyone please provide the soilution to the above points?
Thanks in advance for the solution.
Regards,
Pavan.

Hi Please create Contract and refer same while source list. This will help
Regs,
AD

Adding photo to iPhoto 9.2.1 slideshow reorders Source list

Hi All
I have made a slideshow (100 photos) in iPhoto 9.2.1 and being careful duplicated the slideshow. I then added more photos to the duplicated Slideshow source list only to find the slideshow re-orders the list of photos. I've never experienced this problem before. Quitting and reloading doesn't stabilise the Slideshow.
I managed to add another 8 by adding 1 then couple at a time. But now trying to add more just 1 photo re-orders the list.
I've also turned off the music.
I never had a problem with 100+ slideshows with iPhoto before. Apart from trying to change the lead photo which would cause iPhoto to freeze.
Anyway, has anyone else experienced this issue and can anyone suggest a way around this ?
Thanks so much. JJ

I've had this very same issue and it's making me very upset. I'm looking for an answer to this!

IPod not showing up in iTunes source list

Hi,
My fifth gen iPod is not showing up in the iTunes source list. I've tried the troubleshooting recommendations (unistall and then reinstall iTunes, delete the iPod/bin file and then update iPod software, etc.) The only one I have not tried is restoring the iPod to factory settings because that would erase the entire contents and since I can't see it in iTunes I couldn't add them back in.
Does anyone know what I can do to get the iPod to show up in the iTunes source list?
Thanks

Hi. I'm not sure I'm using this discussion form correctly. Anyway, I'm on an iBook. OSX 10.2.8 and recently purchased a fifth gen ipod. connected everything just fine and have been importing some CDs to itunes and updating songs on the ipod for a couple of days. Listening to music, the whole deal.
today, was trying to eject my ipod and computer froze. Restarted my computer and everything is gone from my ipod. Started the procedure of updating the ipod to reload the songs (still in itunes library) and realized that ipod is not showing up in my itunes source list.
Did the 5 Rs. Haven't reinstalled software cause not sure how.
Any help?
Welcome to Apple Discussions!
First try resetting your iPod again (several times
may be needed). Connect it to your computer, and see
what happens.
If your iPod appears in "My Computer", then have you
tried out all the suggestions in this article?:
iPod appears in Windows but not in iTunes
In your case, you'll probably need to assign your
iPod a different drive letter (because your computer
may be recognizing the iPod as a network device).
If your iPod doesn't appear in "My Computer" however,
then try the following. If it already does, then
assign it a different letter following the
instructions further below.
I'm presuming that you've read through all the
suggestions in this article below, correct?:
iPod doesn't appear in Windows or in
iTunes
Restoring may be worth it, by the way, because
restoring formats your iPod to your computer, so it
may be recognized after doing this.
Have you tried the Five R's?
The
Five R's
If there are other hardware devices that are
connected to your computer's USB ports (printers,
camera), then try disconnecting them, resetting your
iPod, and connect your iPod to your computer once
more.
Try getting your computer to recognize your iPod by
also: operating in manual disk mode:
Putting your iPod into disk mode
Assigning your iPod a different drive letter
Now, see if your iPod is recognized by Control Panel,
and try assigning it a different drive letter:
1 - Don’t plug in your iPod yet.
2 - Go to "START -> Control Panel -> Admin Tools (if
you don't see this, click on "classic view" button on
the left panel) -> Computer Management."
3 - Click on the "Disk Management" button in the left
panel area.
4 - Now, with "Computer Management" and Control Panel
windows opened, reset your iPod, and connect it.
5 - Right-click on your iPod's listing there (after a
few moments when it gets recognized in this drive
window), and click on "Change Drive letter and
Paths". Then the "Change..." button.
Here's what it should look like:
Assign your iPod the letter "M" "N", "O" or the like
(further along in the alphabet).
For more details, see this article:
Windows confuses iPod with network device /
Changing drive letter
I hope this helps you, post back if you have issues
with performing any of these things.
-Kylene
If any post helps or
solves your issue, please mark it that way
accordingly. Thank you for helping the boards!

IPod not showing up in source list

A friend of mine wanted me to revamp her iPod with my music, erasing all that she had. Problem is, iTunes isn't seeing the iPod. My computer is. It's coming up as Mass Storage Device, and not showing up in the source list on iTunes. And when I opened the "Mass Storage Device" is was empty with the exception of some empty folders. The weird part is, iTunes opens when I plug it in. I already updated my iTunes software and reset the iPod with that menu center button hold manuver, and restarted my computer a few times. All the other troubleshooting stuff needs the iPod to show up in the source list, which it's not doing. So yeah. Any help would be nice.

Where did she originally connect her iPod??? It could be in MAC format and thus not allowing your device to see it... See this KB Article to determine the device's format:
http://support.apple.com/kb/HT1335
Besides the disclaimer of music sharing, once you erase the content of her device and load your iTunes data on there it will be ok. But of course the next friends device that she hops onto will undo the process that you've done above.
An iPod is really meant for a single users PC/MAC and syncronizing thier library. This causes some of the issues that you are seeing here.
Hope that helps, and I'll end on the piracy harping...

I have 2 laptops both with iTunes installed but on one my source list includes 'Movies' and the other 'films' does anyone know why this would be?

i have 2 laptops both with iTunes installed but on one my source list includes 'Movies' and the other 'films' does anyone know why this would be?

sorry all - disregard I've identified the issue in the language settings with one set to 'English - United States' and one to 'English - United Kingdom' - now fixed.
Cheers

MRP - source list!!

Hi All,
I have two vendors in the source list. I have fixed the second vendor in the source list.
When I run the MRP for the material the system assigns the first vendor to the PR and not the second vendor which is fixed!!
This is something strange. The MRP run should always pick the fixed vendor as per my understanding.
Is this a timing issue? Is it that the MRP only considers master data that I have created yesterday?
I say this because in certain cases when I have maintained the source list or the quota arrangement it was effective only the next day and not on the same day!! Is there any specific config related to MRP for this?
Regards,
Vishal

hi,
A.check for the few things:
1. Always remember the source determination is in this way:
a. quota arrangement
b. source list
c. outline agreement
d. Inforecord
Now check whether there is any exsisting vendor record for the quota arrangement...
B. Check the validity period of the source list...
C. check whether there is A vendor ticked or mentioned as "Regular vendor"
D. Also check whether the B vendor for whom you want the MRP to run, is indicated as MRP relevent or not...with the MRP indicator in the source list...
Check these parameters..
Regards
Priyanka.P

Vendor update / generation in source list

Hi,
is there any solution that vendor update / generate in source list with reference to info record creation date.
standard system behave in a way to generate / update source list on current date of updation.
Regards,
Ali

Even I had the same problem. source determination in MRP is different when compared to source determination in PR. MRP just picks the first vendor in the source list no matter whether the other vendor is fixed or not.
Even SAP doesn't have proper answer on this issue in OSS note 206684.
As others said, you need to copy ME05 and create a new TCODE with different logic for source list date.

Pick UOM from Source List

Hi,
We have an issue while carrying out replenishment.
The article concerned has got an ordering unit as CAR (which is 12 Ea)
Target stock is 24Ea and reorder point is 12Ea.
Now when stock is 11Ea the replenishment process will pick up this article, as stock has gone below reorder point.
But the order placed is for 1 CAR. The vendor is ready to supply this item as EA for this site and so we require the Purchase order to suggest 13 Ea instead of 1 CAR. This is a requirement for just this site.
If we maintain in source list (ME01) for the site, article and vendor combination, Ea as the Order unit then in Purchase order can we recall Ea instead of CAR at the time of replenishment orders ?
Hope I have made myself clear.
Regards
Govind
Edited by: Govind Ramesh on Oct 29, 2011 5:36 PM

Hi,
Appreciate your responses.
Now for making the UoM in the Info record as EA would then make it EA for all the sites.
We just want it to be for one site as they are being supplied in EA.
This is the reason that the option in source list maintenance was asked.
Is there any way we can create priority for the UoM in the source list for Aritcle/Site/Vendor combination in comparison to the order unit in Info record ?
Regards
Govind

Source List Required in Extended Classic

Hi,
We have a requirement wherein a Source List is required which contains the R3 contract. Now, when a PO is created in SRM, the source should pick up the contract based on the vendor list and the contract number and then this should also update the contract in the backend.
My questions are:
1. Vendor list cannot be maintained in a Extended Classic Scenario (as far as i know, it is the functionality of Standalone scenario. Can this be done in ECS? If yes, how?
2. Once a PO is created in SRM by referring a R3 contract, can the contract be updated in R3? If yes, how?
I would appreciate a quick response as this issue has become hot. Sorry about that!!

Hi
<u>1) Yes it is possible. Try BBP_SOS_BADI in SE18.</u>
Refer to these links.
<b>http://help.sap.com/saphelp_srm50/helpdata/en/6c/26d53bd2176b35e10000000a11402f/frameset.htm
http://help.sap.com/saphelp_srm50/helpdata/en/6d/0f343e47fd6b2ee10000000a114084/frameset.htm
http://help.sap.com/saphelp_srm50/helpdata/en/26/1a5da42ae0ab46836ea5e7f3a903b7/frameset.htm
http://help.sap.com/saphelp_srm50/helpdata/en/75/c65d3a0eb60365e10000000a11402f/frameset.htm
http://help.sap.com/saphelp_srm50/helpdata/en/38/4cc5376848616ae10000009b38f889/frameset.htm
http://help.sap.com/saphelp_srm50/helpdata/en/53/c49840893d2b54e10000000a1550b0/frameset.htm</b>
2) I am not sure. I will get back soon.
Regards
- Atul

IPhoto isn't displaying my source list

When I launch iPhoto, only the menu bar on the top appears. To view the photos, I need to go to View and choose Full Screen. It used to automatically open up with the Source List down the left hand side which made it easier to sort through and organise my folders (albums, events etc). Now I need to toggle between Full Screen or no screen at all. What has happened??
Thanks.

Greetings Monica,
While in iPhoto try going to Window > Zoom.
If that doesn't fix the issue quit iPhoto and remove the following to the trash and restart your computer:
Home > Library > Caches > com.apple.iphoto (anything with this in the name)
Home > Library > Preferences > com.apple.iphoto (anything with this in the name)
Hope that helps!

Scheduling agmt v/s Source list validity dates

Hi,
When the MRP runs it is considering the Source list validity even if the Scheduling agreement is invalid. Can you please advice if this is standard SAP behavior and if there exist any configuration to control this ?

Hello
Your question is very generic, so can you please provide a more detailed description of your issue?
What do you mean by "scheduling agreement is invalid"?
It is not valid on the date, the target quantity has been exceeded or what?
In the meantime, I wrote the following document with the most frequent issues reated to MRP source determination that may be useful to you:
MRP: Vendor is not selected and general problems on source determination
BR
Caetano

Source list issue

Similar Messages

Maybe you are looking for