Source List v/s Info record

Hi ,
I have created a source list for a vendor , Material , plant and Purchase org combination.(This is NON FIXED source)
When I try to assign this source automatically (thry ME56) to a purchase req...... System is not showing me that source.
But If the corresponding info record is also created , system assigns it automatically.
Does it mean that in order to make a source list valid (so that sources can be appeared and assigned to PR) , it is mandatory to create corresponding info records.
Regards
Sandeep marwha

Hi,
The below are required(Must) for Auto PO Creation:
1. Auto Po tick in Material master
2. Auto Po tick in Vendor master
3. Info record
4. Source List.
If it is Fixed vendor , even ME58 step is not required...you can directly used ME59N...
If it is not a fixed vendor for that material,,,in ME58 you can choose(assign) any vendor and process the PO creation.
Thanks,
Kumar Arcot

Similar Messages

  • Source list Automatic with Info Record data ..ME05  ??

    Hi experts,
    how to create  source list  automatic with inforecord data.
    i mean how to use  T-code /ME05. what is the steps are involved.
    Thanks in Advance,
    Anthyodaya.

    Hi,
    For all those materials in that perticular plant you want to create source lists to be generated will be given as input materials and based upon the Genarate all records for material/plant ,excluding outline aggrements Or outline aggrements onlyradio button you selected system reads the documents as per the radio buttion and finds the vendor and for that vendor as per the valid from and valid to dates system creates source lists.
    Regards,

  • Listing for Purchase info record

    Hi,
    Is there any report or transaction code which can generate listing of Purchase info record ?
    Thanks

    Dear,
    Check ME1M.
    Enter plant, Purchase Org. and other detail as per your requirement.
    Then click on execute button.
    Regards,
    Maehsh Wagh

  • Source inspection without Q-info record?

    Can we do source inspection without using quality info record?
    If yes then what master data we need to set-up?
    Thanks.

    Hi
    Mass creation of quality info records is possible through QI06.
    Pre requistes are
    1) In material master activate qm procurement key and enter control key with delivery /vendor release.
    Use Transection Code OQBA and create your screen varients with required User status.
    Go to QI06,
    Enter material, vendor , plant. In add tab enter release until date and other required fields
    When adding records, you can enter one or several materials. As a rule, the only materials used for processing are those for which QM in Procurement is active in the material master and a vendor release or quality assurance agreement is required by the control key.
    You can enter one or more vendors, for whom a quality information record is to be created.
    If the indicator u201COnly for Purchasing Info Recordsu201D is set, the system only creates those quality info records, for which a purchasing information record has been maintained.
    By doing this you can create quality information records for all possible material-vendor combinations.
    If you execute this then You will get the list of all possible vendor material combination for which QI can be maintained by selecting line you can save them.
    The quality info records printed in the list have a traffic light indicator which denotes the following:
    Green light: - All data is correct
    Yellow light: - Ordered quantity is greater than released quantity
    - There is no quality assurance agreement
    - Lock function is active
    - Validity period of QM system has expired
    Red light: - Deletion flag is set
    Regards
    Hari
    Edited by: Harikris_83 on Sep 20, 2011 12:16 PM

  • Source determintaion with unique info record on material group

    Gurus,
    I am having an issue with source determination for a purch req item with item category D (Service). There is an info record on a material group (only this one). During the automatic assignment process from me57, the info rec is not selected and i don't even have a pop up displaying it. I have to go through manual assignment process select it and assign it. Any idea what the problem can be ?
    For other item categories, this process works fine...
    Cheers,
    Olivier

    Indeed my source is unique and yes i know there should be options from which to choose from as it is the case for non service items but there isn't any and that is my problem! I get the message "not possible to source all items in PR" and the only option is to go and manually retrieve info record for specific material group. Requirement here is to perform this automatically.  Thanks for your help.

  • Info records with multiple vendors

    Hello all,
    I have some info records defined for multiple vendors for subcontracting material numbers. How do I tell SAP to use a specific vendor by default when it creates the Purchase Requisition?
    Thanks in advance for information.

    Hi,
    If you have maintained source list(ME01) and "info record"(ME11) for the desired vendor and material combination and MRP indicator as 1 . It will default as "fixed vendor" in PR when you run MRP. Of course when you copy PR into PO, it is going to copy the same.
    if you want to create Subcontract PR ...you have to use special procurement key 30 for that material.
    Hope it helps you.
    Kuber

  • Source list ,vendor master ,

    Wher can we find the source list and quality info records for material and vendor? For a given material no. and vendor no.
    Thanks
    VV

    Hi,
    source list :  ME01, ME03
       my favorite trn: ME05, ME0M
    Inforecord: ME11, ME12, ME13
    my favorites: ME1L and ME1M
    Hope this helps! reward points if useful
    regards

  • BRFplus and creation of info record and source list

    Hi there.
    I would like to use BRFplus to fill out MM values and after that automaticly create info record and source list for this MM record. The first step is ok, but creating IR and Sourcelist I am not sure. What is the best way to do so?
    -> Calling FM? If so how should I use the Result Data Object and Dispatcher field in BRFplus?
    Thanks in advance.
    Per Zanchetta

    Hi,
    Yes could call FM using BRF+ Procedure Call-Function Module. And map the exporting parameter (results of FM) to BRF+ ruleset parameter and do the further processing.
    When you assign FM name then in below container UI you can add all required parameters using "Add Parameter" button.
    regards Tiwari

  • Difference between source list and info records

    Dear All,
    What is the difference between Source List and Info Records?
    Thanks N Regards
    Anandasiva

    Hi,
    The source list is the list which shows the sources from which you can procure the material. If you have ticked the source list requirement in the material master, then you can procure the material only from the vendors mentioned in the source list.
    In Inf Record, you maintain the data for a material supplied by a vendor. e.g. Material price, tax code, other conditions,, buyer code, delivery & payment terms.
    Hope your requirement is fulfilled.
    Reward points if the answer is helpful.
    Regards,
    Prashant Kolhatkar

  • Mass deletion of specific lines in source lists

    Hi gurus,
    In our organization, each material has many sources (plant+purchase org.) in its source list.
    Now, we need to for our thousands of materials, to delete a specific source for each material (since one of our pur. org, is no longer valid).
    We couldn't find any BAPI/BI that would delete a specific entry.
    Please help!
    Thanks,
    Limor

    Hi Limor MM,
    Welcome to SCN!
    Try with program RM06WRE0 (Reorganize Source List) with Delete All Records Valid Until.
    Select Test Run for  testing and once if satisfied with output results then run the same without test run.
    reg,
    Bhg

  • Creation Info Record at Material group,Source List & Assign source to PR

    Hi All,
    Mine is a typical requirement, I would like to create a Info Record at Material Group level and create Source list for the Material & Plant combination. Now for this combination, I would like to create PR & assign source for this PR.
    Completed at my end:
    1. Creation of Info Record at Material Group level
    2. Maintained Source List at Material level.
    Issues/ Errors:
    1. Info Record does not exist for the combination of Material & Vendor combination (which is true & I do not want it also)
    2. Material differs from the Material from the Info Record.
    Help / Information required :
    1. Setting MRP relevant "1" for the Source List and for checking the field "Fix".
    2. Assigning the Source in PR (in ME57)*Can anyone provide solution to the above
    Can anyone please provide the soilution to the above points?
    Thanks in advance for the solution.
    Regards,
    Pavan.

    Hi Please create Contract and refer same while source list. This will help
    Regs,
    AD

  • Source List for Standard and Subcontracting Info Record

    Dear Sir and Madam,
    We have scenario where nart A could purchase with Standard PO or Subcontract PO.
    We  have following 2 Standard Info Record and 2 Subcontract Info Record.
    Standard InfoRec 1 for Nart A to Vendor 001 --Fixed Vendor
    Standard InfoRec 2 for Nart A to Vendor 002
    Subcontract InfoRec 1 for nart A to Vendor 003 - Fixed Vendor
    Subcontract InfoRec 2 for nart A to Vendor 004
    We have the problem here, how can we set the fixed vendor in Source List, for Standard PO using vendor 001 and Subcon using Vendor 003?
    Thank you very much,
    Regards,
    CW

    In source list only one vendor can be assigned.
    If u want to assign 2 or more vendor, try using Quota Arragement.
    http://help.sap.com/erp2005_ehp_04/helpdata/EN/f4/7d267944af11d182b40000e829fbfe/frameset.htm
    http://help.sap.com/erp2005_ehp_04/helpdata/EN/75/ee115f55c811d189900000e8322d00/frameset.htm

  • Info record and source list

    Hi
    We have two info records for one material and source list is not being maintained.
    What will be the implications in this scenario??
    Regards
    Chitra

    Hi,
    If two info. record exists and none of them are marked a fixed vendor, then at the time of PR creation you will be offered two sources for the material and you will have to manually choose one source.
    Hope this clears your doubt.
    Thanks,
    Reetesh

  • Info record and source list mandatory for PO creation?

    Hi Gurus,
    Client wants to make Info record and source list mandatory for PO creation?
    If Inforec and source list not available for that material, then user can't able to create PO.
    How can I achieve this requirement?
    Any user exit available?
    pls help..

    Hi ,
    SproMM-Purchasing -Source ListDefine Source List Requirement at Plant Level
    If u mark the indicator then the Source list is mandatory for all the materials procured.
    If u want for a speciic material , mark it in purchasing view of Material Master.
    Inorder to create a source list , inforecord is mandatory -- this is by default Standard SAP .
    Regards
    Ramesh Ch

  • Purchasing Info Record and Source list

    Hi all,
          I am using purchasing info record along with a price for the vendor and material.  This would get the net price into the Purchase order.  Do i really need to create source list ?  What will source list do for me ?   Wouldn't having info record be sufficient ?
         Looking forward to hear your suggestions.
    Thank you.
    Joyce

    Hi Joyce,
    If you have not maintained valid conditions in your Pur info record then price is picked from last purchase order through purchase order price history if customizing settings allow so (In your case if customizing settings allow and the net price 100 in the info record is not from valid conditions, price picked will be 250).
    In the price determination process in PO system always first looks for pur info records with valid conditions if not found then it looks for last PO price.
    There is also a parameter for default values for buyers called EVO. If you make settings in customizing for this parameter and tick the Chkbox for picking the last purchase order price in it and you attach this parameter to your user ID in the user-own data with PI value, then last PO price is picked as default value in the net price.
    You can refer the following link
    http://help.sap.com/erp2005_ehp_04/helpdata/EN/75/ee130655c811d189900000e8322d00/frameset.htm
    Source List -
    The source list is used in the administration of sources of supply. It specifies the allowed (and disallowed) sources of a material for a certain plant within a predefined period. Each source is defined by means of a source list record.
    The source list serves:
    To define a source of supply as "fixed". Such sources count as preferred sources over a certain period of time.(For example, the fixed vendor for material 1 is X for the first quarter and Yfor the second quarter of the year.)
    To define a source of supply as "blocked".(This means, for example, that contract 123 may not be used for a certain period of time.)
    As an aid in selecting the preferred source during the source determination process.(For example, the vendor A is determined as the source for an item of a requisition dated 15th June relating to material 1.)
    To block the external procurement of a material
    Regards,
    Rahul.

Maybe you are looking for