Source Monitor and Program Monitor not playing back video

The last time I used Premiere Pro CC was Oct 8 and the program worked fine. As of today, I reopened the project file and the source and program monitors are displaying nothing respectively. However, the audio playback for both are unaffected. I've tried making a completely new project with different video and I get the same error. I've restarted Premiere, restarted the computer, and reinstalled Premiere. No help. :/
Premiere CC Version: 8.1.0
Computer information:
Model Name: Mac Pro
Model Identifier: MacPro5,1
Processor Name: Quad-Core Intel Xeon
Processor Speed: 2.4 GHz
Number of Processors: 2
Total Number of Cores: 8
L2 Cache (per Core): 256 KB
L3 Cache (per Processor): 12 MB
Memory: 16 GB
Graphics ATI Radeon HD 5770 1024 MB
Processor Interconnect Speed: 5.86 GT/s
Boot ROM Version: MP51.007F.B03
SMC Version (system): 1.39f11
SMC Version (processor tray): 1.39f11
Serial Number (system): H00470SREUH
Serial Number (processor tray): J504301VJBH8B
Hardware UUID: 4D6175EA-3353-5E84-BCA0-42A013A69BED

Hi,
Please go to File > Project Settings > General and change the video renderer to GPU Acceleration software only and see if that helps.
Thanks,
Rameez

Similar Messages

Source monitor and program monitor boxes will not display video in full only half

I have adobe premiere pro cs6 and source monitor and program monitor boxes will not display video in full only half. So the top half of both monitors are black and the bottom half is where the video displays. But you can see that the video is missing the top part. Like people's heads are cut off and can only see body. How can i fix this so premiere pro cs6 will use the full monitors boxes to display my video?

This is a known issue with a recent Windows update.
The Fix (post 3):
http://forums.adobe.com/message/5494175#5494175
The Status Update (posts 46 / 52):
http://forums.adobe.com/message/5555797#5555797

Imovie not playing back video from one event

Select vidoes in iMovie '09 won't play back for me. All I get is a black box, no audio, no video. The issue appears to be confined to videos from one particular event. The preview shows up just fine, but no actual video.
The videos were taken and imported from the same Sony camera as the videos that do work. They also play back fine in Quicktime. The format is .mov. Any ideas?

Fixed the issue myself. Here's a step-by-step because I what found online pertaining to this issue were not clear on how to fix it. (Note that this is what I did to fix the problems, some of the steps might not be strictly necessary.)
How to get movies to start playing back again in iMovie '09:
1.) Close iMovie.
2.) Delete contents of the "iMovie Cache" folder for the event that is not playing back correctly.
- There are were two files "Cache.mov" and "Cache.plist", I deleted both.
3.) Restart iMovie
This appeared to force the program to generate new files and start working correctly. From what I read on other postings it was probably caused by the program not closing properly, which I seem to recall it crashing on me or my wife a while ago.
@ Bengt Wärleby
I appreciate you taking the time to post a reply, but please try to read the question before you do so in the future. I had said that files imported from the same camera work correctly (i.e. the same file type/codec), so the problem is obviously not a codec issue. Furthermore, .mov is the extension for the QuickTime File Format (http://en.wikipedia.org/wiki/.mov).

Adobe Premiere Pro Help | Using the Source Monitor and Program Monitor

strJiveDescriptionhttp://helpx.adobe.com/premiere-pro/using/source-monitor-program-monitor.html

Even back in the days of printed manuals, there were often sections, that repeated, as they had application to a few slightly different topics. I always found that better (then), than just having a note to "go to _____ for info on this." Probably used a few extra trees, but one did not have to constantly flip back and forth. Now that we're talking 1's and 0's, I can see where a limited bit of repetition would enhance the flow of knowledge, and understanding, even when hyper-linked.
Just my observations,
Hunt

Source Monitor and Program Monitor dead in Premier Pro?

I recently installed Premiere Pro CS6 on my laptop so I could use it on location, but both the Source Monitor and the Program monitor are completly dead. The Source Monitor just displays a bright array of colours when you try to play anything, and the Program Monitor is just plain black. The audio still plays at full volume and I've tested the imported media (a mixture of .jpg, .mov and .mp4 fils) in other programs on my computer and they work fine. Any suggestions people?
Here is a screen grap of the Premiere Pro doing its thing: https://pbs.twimg.com/media/A2mmd7JCQAEyPXV.jpg:large
Thanks.
Brice

More information needed for someone to help... click these links and provide the requested information
-http://forums.adobe.com/message/4200840
-http://forums.adobe.com/thread/416679
-http://forums.adobe.com/thread/419406
Is your laptop one of those with dual video?
Dual laptop video
-http://helpx.adobe.com/premiere-pro/kb/error---preludevideo-play-modules.html
-http://forums.adobe.com/thread/1001579
-Use BIOS http://forums.adobe.com/thread/1019004?tstart=0
-Mac Utility http://forums.adobe.com/thread/1017891?tstart=0
-HP Fingerprint/Password conflict http://forums.adobe.com/thread/911575
-link to why http://forums.adobe.com/message/4685328
What is the graphics adapter you have, and what is your driver version?

Quicktime playback sometimes does not play back Video

Recently upgraded to Snow leopard. Problem appeared after upgrade.
On some, not all, quicktime videos, the play back only has audio, no video. Quicktime ver. 7.6.3.
I have tried to upgrade to 7.6.4, but the installer won't let me, says I already have QT 10 installed. Even after I delete QT10, I still can't install it. I have reinstalled snow Leopard, and quicktime twice. Visited the genius bar, all with no luck.
Also have 3ivx MPEG-4 installed.
Any ideas? This is a problem because the videos of a tutorial DVD that I purchased only plays back some of the QT videos. The DVD works fine on an old PB G4.
Thanks

Open one of the non working files using QuickTime Player (Utilities folder) and then open the Movie Inspector window.
My guess is the files use Flash (.swf) tracks. QuickTime Player higher than 7.3.1 no longer plays Flash tracks.
You can't install 7.6.4 on Snow Leopard.

Source clip and program monitor have different sizes, how can I fix that?

How can I have the same size both side?
Thank you.

It seems your sequence settings does not match your footage.
Start over and do this to get the correct settings:

Premiere Pro CS6 and Audition CS6 not playing any media

I'm having a problem with both Premiere pro and Audition CS6 not playing back any media when I hit play. The play button shows that it should be playing back but the playhead doesn't move at all. I'm on a late 2011 Macbook Pro running Mountain Lion 10.8.2 with 16gb RAM and an SSD. I've already completely uninstalled and reinstalled both application multiple times to try to get this working. Any help would be greatly appreciated.

1st, More information needed for someone to help... please click these links and provide the requested information
-http://forums.adobe.com/message/4200840
-http://forums.adobe.com/thread/416679
-http://forums.adobe.com/thread/419406
2nd, What are you editing, and does your project match your video?
Read Bill Hunt on a file type as WRAPPER http://forums.adobe.com/thread/440037
What is a CODEC... a Primer http://forums.adobe.com/thread/546811
What CODEC is INSIDE that file? http://forums.adobe.com/thread/440037
Report back with the codec details of your file, use the programs below... a screen shot works well to SHOW people what you are doing
http://forums.adobe.com/thread/592070?tstart=30
For PC http://mediainfo.sourceforge.net/en or http://www.headbands.com/gspot/
3rd, Please NOTE that the PPro CS6 screen may look a bit different (I use CS5)
For CS5 and later, the easy way to insure that your video and your project match
See 2nd post for picture of NEW ITEM process http://forums.adobe.com/thread/872666
-and a FAQ on sequence setting http://forums.adobe.com/message/3804341

Why are Adobe Premiere Pro CS6 source and program monitors playing each others footage?

Why are Adobe Premiere Pro CS6 source and program monitors playing each others footage? I import my footage into the project like normal. I drag it to the source monitor on the left hand side to set in and out points then I drag it to the time line. The footage drops into the time line with no problem but when I go to play the footage in the time line it plays back on the source monitor and not on the program monitor like it is suppose to. Other times ill drag the clip to the time line and trim it there and it will be fine and show up on the program monitor. Then ill go try to set a clip to have in and out points (which is suppose to show up in the source monitor) but it shows up in the program monitor. The clip is not even in the time line it should not be on that monitor! I have updated the program to the late update. I have re installed the program numerous times and I have even ran the Adobe Clean up program. Couldn't find much on this problem. Please help thank you! I have a PC. My computer is also way over the recommended minimum specifications to have the program installed on.

Definitive Answer (I believe): It's all about this setting, "Write XMP ID To Files On Import" - which confirms that Adobe Premiere Pro is deliberately modifying the .mov file: http://helpx.adobe.com/premiere-pro/using/preferences.html#WSE3BD4A43-7022-4fe6-97F5-95313 935347B
These posts give some background as to why having this setting enabled would be beneficial: one benefit being to be able to skip conforming files by matching the conformed file with the original using the embedded XMP tag :-
http://helpx.adobe.com/premiere-pro/using/preferences.html#WSE3BD4A43-7022-4fe6-97F5-95313 935347B
http://www.dvinfo.net/forum/adobe-creative-suite/498627-why-premiere-modifying-video-files .html
https://forums.creativecow.net/thread/205/876064
(Found using Google search term "adobe premiere pro date modified")

Source and Program Monitor not working after October CC 2014 Update

I updated to the October 2014 Replace of Premiere Pro and since then I have had major issues with the Source and Program monitors.
I can select a clip from the media browser and have it appear in the source monitor - click play. The clip will play for a bit and the picture will stop, but the audio will keep going. After a few seconds the source monitor will just display a red screen and the audio will keep going. The same things happens in the program monitor (different clips that worked before the October 2014 update) will start displaying the yellow media pending screen - and then go to red after a few seconds. Again - this is a mutli-camera sequence that worked before the October 2014 update.
I am pretty much dead in the water at this point. And yes, I have rebooted, changed the Mercury play back engine from hardware to software. Nothing seems to correct the issue.

I have had similar problems. In fact playback is so sluggish it is unworkable.
In addition Audio in nested sequences doesn't play back, and when it does it is intermittent. Totally unworkable!

Source and program monitors in Premiere are Pure Grey, no video, no frame for video

I can load a clip into the source monitor; it has the name on top ("Source: [clipname.MOV"], but there's no video there, not even a frame where video would go. Let me be clear: this is not a black video frame situation. The Source monitor is the gray background color edge to edge. If I play the clip, the position indicator moves and I hear sound.
The same situation for the program monitor. Timeline is open, video and audio are there -- and the V1 track is enabled. Play it and there's sound, the position indicator in the timeline and the program monitor track perfectly, but all there is in the program monitor is the grey background color edge to edge. The timeline that's open holds a amall edited piece that used to show up quite fine in the Program monitor.
When I go into the setting of the source and program monitors, I see that "composite video" is selected...
Ah, now the plot thickens. If I choose something else, let's say "Vectorscope", when I select "Composite Video" again, it STAYS as a Vecotorscope. In the dropdown Composite Video is checked (dotted, really), but the Vectorscope remains. It's almost as if the video is not redrawing itself.
I would think there's some easy solution to this, that this must be a newbie kind of problem, and perhaps I am not phrasing the question right when I search the forums or google the problem, but I've been unable to find the answer on my own, so I appreciate the help in advance.
Claudia

More information needed for someone to help... please click below and provide the requested information
-PPro Information FAQ http://forums.adobe.com/message/4200840
MOV is a wrapper, what is inside your wrapper?
Codec & Format information, read both links in reply #1 http://forums.adobe.com/thread/1270588
Report back with the codec details of your file, use the programs below... A screen shot works well to SHOW people what you are doing
http://forums.adobe.com/thread/592070?tstart=30 for screen shot instructions
Free programs to get file information for PC/Mac http://mediaarea.net/en/MediaInfo/Download
What is your exact brand/model graphics adapter (ATI or nVidia or ???)
What is your exact graphics adapter driver version?
Have you gone to the vendor web site to check for a newer driver?
For Windows, do NOT rely on Windows Update to have current driver information
-you need to go direct to the vendor web site and check updates for yourself
ATI Driver Autodetect http://support.amd.com/en-us/download/auto-detect-tool
nVidia Driver Downloads http://www.nvidia.com/Download/index.aspx?lang=en-us

Source and Program monitor are black/blank...Just installed CS5

I drag my first video clip over to CS5 and put it in the timeline. I play the video in the program monitor and all I get is sound and no video. WHen I hit the spacebar/pause, I can then see the video in the program monitor. BUt when I go back to the play mode, it goes black again and I hear the audio.
THe Source and program monitor are giving me the problems. Any help for a rookie?

Work through all of the steps (ideas) listed at http://ppro.wikia.com/wiki/Troubleshooting
If your problem isn't fixed after you follow all of the steps, report back with ALL OF THE DETAILS asked for in the FINALLY section, the questions at the end of the troubleshooting link... most especially the codec used... see Question 1

Premiere Pro CC 2014.1 - end of media indicators different in source and program monitors???

Here are two screen grabs showing the right edges of the source and program monitors in PPCC 2014.1. Does anyone know why the end of media indicators are so different? Left is source monitor, right is program monitor.

Those are actually different indicators. The one on the left is the end of media indicator, which lets you know there are no more frames in the source clip. The one on the right is commonly known as the end of sequence indicator, which can also get to in the Source Monitor if you play a clip to the end and then hit Right Arrow.
Both indicators are controlled by the same option in the Overlay Settings dialog: End of Media/Sequence Indicators.

Oversaturated colors in Source and Program Monitor windows

After I updated to Premiere CC 7.1.0 the colors is much more saturated in the Source and Program Monitor windows and also in the Bin thumbnails.
Colors is fine when viewing the video under Export Setting, in the Title window, in the thumbnails on the timeline and also when I open a ProRes export in Quicktime:
I'm on a Macbook Pro bought in January 2013.
I've tried switching the renderer between CUDA, OpenGL and Software Only - no change. I've also tried unchecking "Composite in Linear Color" under Sequence Settings with no luck.
How can I change this?
Best regards,
Kasper

I've been editing in Premiere since 5.1 and this has never been an issue before. So what you're telling me is I can no longer rely on colors when editing on my Macbook without having to plug in an external monitor?
I'm not buying that - it must be possible to view the same colors in both the Source/Program monitor and in the timeline/Title window like always.
What could the problem be associated to?

Media showing pending in project folder and source and program monitor

I have Premier Pro CC and Premier Pro CC 2014 and I now have an issue with some imported files showing in the project window as pending. If I open them in the source monitor or program monitor I get the same message. Some of the files are green until you hover over them then they go to the gold screen with text showing Media Pending. Any ideas what's going on? I'm on a PC with 32G memory and nvidia GTX680 GPU and I was not experiencing this issues before.

On the slight chance you're using that awful, notoriously bug-laden plug-in Magic Bullet Looks, it's causing this same problem, and you are guaranteed that by disabling it, your problem is solved. It was a nightmare for me, because my whole project was color-corrected based upon that plug-in, so I had to downgrade to an earlier version from last year since Red Giant are totally stagnant in fixing its bugs.

Source Monitor and Program Monitor not playing back video

Similar Messages

Maybe you are looking for