Source monitor and timeline have different audio levels

When I bring an mxf file into the source monitor the audio of a file it is perfect at -12db but as soon as I bring the same file into my timeline the audio shoots up to -3db. I have checked the mixer and all levels are set for 0 gain. I did notice that the Source Audio format was 48000 Hz - 24 bit - 4channels and just below the Project Audio Format: 4800 Hz -32 bit floating point - 4 channels. Any help is appreciated.

Is it because in the source monitor you are only hearing one track but on the timeline you have a mix of all 4.

Similar Messages

  • CS6/CC - switching between source monitor and timeline disaster

    Now what is this?
    It all works fine until you try DV Output.
    In DV Output mode every time you switch between source monitor and the timeline it goes to some scary ritual:
    1. output disabled on external monitor
    2. some crazy flickering happens
    3. ok, now updated picture on external monitor finally appears
    Same happens when switching back to timeline.
    Also when scrubbing through timeline video and audio is late for a few centuries on DV device/external monitor/speaker.
    Why Adobe screwed firewire environment editing? I'm thinking about changing my job. Editing with Premiere is killing me lately. I'm thinking about starting to work with bees or strawberries, or something else less frustrating.
    And Premiere CS 5.5 was the best editing software ever released. It has no similar problems. Why CS6 and CC are retarded?

    I'm just asking for properly working feature which is alredy implemented and worked fine in earlier versions.
    Adobe, can this be fixed, please?

  • Time Code Effect  Source Monitor and rendered .AVI movie display different timings???

    Im seeing a strange error and hope someone might be able to help me out. I am shooting elementary classroom reading lessons for a study by the University of Michigans School of Education. It is important to the study to see what takes place over about a 2hour period of time.
    Im shooting with 2 cameras. 1 on the teacher the other on the students. Im shooting on mini DV. The first camera I start about 4min ahead of the second so that when the 1hour tape is filled I can switch the tape in camera 1 while still capturing activity on camera 2.
    When I edit the footage I am cutting back and forth between the 2 cameras. One initial shot is of the classroom clock as it ticks from one minute to the next. I later use this footage as a guide when establishing the Time of Day.
    When the entire lesson is edited together and cut. I add two transparent video tracks each with the Timecode effect added. The first I synchronize with the classroom clocksetting the Timecode Source to Generate matching the Starting Timecode with the clock footage. I then crop the frames portion so viewers will know the time of day the footage was shot. The other I leave the Timecode Source set as Clip. I use the size and position controls to move the two timers into the upper left of the screen.
    When I view the finished video in the Program Monitor everything looks great. When I Export|Movie to an .AVI file the video looks correct but the timers are off. The last frame of the video in the Source Monitor displays 11:28:19 for the clock timer and 02;02;00;23 for the total time timer. But when I view the .AVI the last frame displays 11;03;40 for the clock and 01;37;36;25 for the total time.
    So how did I lose 24min between the Source Monitor displays and the rendered .AVI displays?

    Yes. After I had the .AVI I ran through the two side-by-side (.avi and the Source Monitor). I have since experimented with some of the Time Code effect settings trying to see if these might have some impact. I have not been able to find any detailed explanation of what each setting controls/does other than an overview (see link below).
    I suspect that this has something to do with the size/length of the clip 2+ hours. Is there an optimal length for an individual clip? Should I be splitting this into 2 or 3 shorter sequences and then putting them on a DVD with Encore and setting it up to play them back-to-back?
    http://livedocs.adobe.com/en_US/PremierePro/3.0/help.html?content=WS4AE872FF-BC0F-45e8-AD8 0-C2784D17CDFE.html

  • Source Monitor and Program Monitor dead in Premier Pro?

    I recently installed Premiere Pro CS6 on my laptop so I could use it on location, but both the Source Monitor and the Program monitor are completly dead. The Source Monitor just displays a bright array of colours when you try to play anything, and the Program Monitor is just plain black. The audio still plays at full volume and I've tested the imported media (a mixture of .jpg, .mov and .mp4 fils) in other programs on my computer and they work fine. Any suggestions people?
    Here is a screen grap of the Premiere Pro doing its thing: https://pbs.twimg.com/media/A2mmd7JCQAEyPXV.jpg:large
    Thanks.
    Brice

    More information needed for someone to help... click these links and provide the requested information
    -http://forums.adobe.com/message/4200840
    -http://forums.adobe.com/thread/416679
    -http://forums.adobe.com/thread/419406
    Is your laptop one of those with dual video?
    Dual laptop video
    -http://helpx.adobe.com/premiere-pro/kb/error---preludevideo-play-modules.html
    -http://forums.adobe.com/thread/1001579
    -Use BIOS http://forums.adobe.com/thread/1019004?tstart=0
    -Mac Utility http://forums.adobe.com/thread/1017891?tstart=0
    -HP Fingerprint/Password conflict http://forums.adobe.com/thread/911575
    -link to why http://forums.adobe.com/message/4685328
    What is the graphics adapter you have, and what is your driver version?

  • Source monitor and program monitor boxes will not display video in full only half

    I have adobe premiere pro cs6 and source monitor and program monitor boxes will not display video in full only half.  So the top half of both monitors are black and the bottom half is where the video displays.  But you can see that the video is missing the top part.  Like people's heads are cut off and can only see body.  How can i fix this so premiere pro cs6 will use the full monitors boxes to display my video?

    This is a known issue with a recent Windows update.
    The Fix (post 3):
    http://forums.adobe.com/message/5494175#5494175
    The Status Update (posts 46 / 52):
    http://forums.adobe.com/message/5555797#5555797

  • Export with different audio levels

    I need, very often, to export the same clip with different audio levels.
    Is it possible to make presets with altered audio levels, let's say one for -12db and one for -8db.
    Until now, i alter the audio level in Premiere, then I make one export, then I go back to Premiere, change again the audio level, I make the second export etc. It works, but it is very time consuming.
    Thanx in advance.

    It is currently not possible. However, feel free to log a feature request:
    https://www.adobe.com/cfusion/mmform/index.cfm?name=wishform

  • Copy CO Number Ranges : "CO area 2833 and 1753 have different elements

    Hi
    Need help
    I am trying to copy CO number ranges (t.code KANK)
    When I click on the copy icon and enter the source and target co area, I get this messgae "CO area 2833 and 1753 have different elements"
    regards
    Kiat

    Hi ; will do that;
    1. Run Transaction OKC1 to check which business transactions must
    exist. OKC1 shows these in a list.
    2. Check Table TKA04 using Transaction SE16 (general table display).
    Specify the controlling area. Compare the result here with the
    result from step 1. If not all business transactions from step 1
    exist for the controlling area, you must generate the missing
    entries.
    3. Call up Report RKTKA04C using Transaction SE38. Read the
    documentation. The report creates the entries that are misiing.
    Nice.

  • Is it possible to have 2 icloud accounts on one pc?  My wife and I have 2 separate itunes accounts and we have different music stored on our iphones.  She just recently got an IPAD and I will be getting one soon.  We would like to share ibooks purchased f

    Is it possible to have 2 icloud accounts on one pc?  My wife and I have 2 separate itunes accounts and we have different music stored on our iphones.  She just recently got an IPAD and I will be getting one soon.  We would like to share ibooks purchased from itunes.  If she stored it them on icloud, can I download it onto my ipad?

    How to use multiple iPods, iPads, or iPhones with one computer
    http://support.apple.com/kb/HT1495
    How To Best Use and Share Apple IDs across iPhones, iPads and iPods
    http://www.nerdsonsite.com/blog/2012/06/07/help-im-appleid-confused/
     Cheers, Tom

  • HT5622 My wife and I have different Apple ID's and passwords but I want to share the music library which is on iCloud under my Apple ID.  How do I set her up to share the music library that exists in iCloud?

    My wife and I have different Apple ID's and passwords but I want to share our music library which is on iCloud under my Apple ID.  How do I set her up to share the music library that resides on the iCloud under my Apple ID?

    You would need to go to Settings>iTunes & App Store, tap her ID, sign out, then sign back in with your ID.  However, if she has turned on automatic downloads, download previous purchases or signed into an iTunes Match account using her current ID, she would have to wait 90 days from when she first did this to change to another ID.  She can, of course, sync your music to her device using iTunes without changing her ID association.

  • My wife and I have different Apple ID, can we share our music on the two devices

    My wife and I have different Apple ID, can we share our music on the two devices

    You do not need to ask the same question twice. Stick with the first post that you started here.
    https://discussions.apple.com/message/21121337#21121337

  • Itunes and iphone have different apple id. how do i change my phone settings to match itunes ID?

    itunes and iphone have different apple id. how do i change my phone settings to match itunes ID?

    Settings>Store...tap the ID shown...sign out...sign back in with the ID you want to use.

  • HT202213 My wife and I have different iTune accounts.  How do we share purchaed content between our ipads and iphones?

    My wife and I have different iTune accounts.  How do we share purchaed content between our ipads and iphones?

    iTunes- How to share music between different user accounts on a single computer
    You cannot merge two separate libraries across user accounts. Photos does not have the function of merging different Photos.library files. If you have Aperture then you can merge the two before migrating over to Photos.

  • Can i keep my music when I make a new account? my wife and i have different taste in music an it is getting to be too much

    My wife and I have different taste in music and I have been using her apple account to buy all my music. Well needless to say we are filling up our ipads, ipods, and iphones with each others music. I just got a new computer for my birthday (thanks to my wife who is sick of me using hers) and would like to keep all of the music I purchased on my new account. I am still using her for this question:) Can this be done? I have spent a lot of money on this music and don't want to lose it all. Please help:(

    What does "what was already downloaded to my wife's computer " refer to?  If its music that's been bought as digital downloads (e.g., from the iTunes store) then the issue I referred to earlier applies (plus, in the case of iTunes purchase, it may not be playable if you're using a different Apple ID in iTunes).  The approach of copying content from your wife's computer to yours is valid if it is the result of importing your music from your CDs into iTunes.

  • Can seeded Elements and Balance have different Date Track

    hi,
    The Elements created in our instance is date tracked to 01-JAN-1900 and the seeded balance date tracked to 01-APR-2005. Can seeded Elements and Balances have different date track both being seeded. Example Element is "PF INFORMATION" and Balance Named by "Leave Encashment"
    How to resolve this problem when I am trying to add seeded Balance which is date tracked to 01-APR-2005 to Element date Tracked to "01-JAN-1900". I am not able to find the Balance in that Element as balance is date tracked later than Element.
    If I want to add custom Element which is date tracked to 01-JUN-2002 and Seeded Balance which is date tracked to 01-JUN-1950. Since in this case i am not able to see the Custom Element in the Balance screen.
    Thanks
    Ram

    you are not allowed to add feeds to a seeded balance type.
    Can the dates be different? Sure. Look to your own dates.
    By the way, why bothering about dates in 2005 and 1900, if you want to run a payroll now?

  • Ok, im new to numbers but i cant work this one out. In column A is an average of hours worked. I have 4 columns. A and B have different values. Column C is an average of hours worked. When column C is less then 8 i need column D to equal column a

    Ok, im new to numbers but i cant work this one out. I have 4 columns. A and B have different values. Column C is an average of hours worked. When column C is less then 8 i need column D to equal column A. When column C is equal or greater then 8 i need column D to equal the sum of A and B.

    Hi Lucas,
    Try this:
    Formula in D2 (and Fill Down) =IF(C2<8, A2,A2+B2)
    The IF function follows the logic of if, then, else.
    IF(this is true, then do this, else do that)
    If it is raining, then stay at home, else hold a picnic .
    Regards,
    Ian.

Maybe you are looking for

  • Error while compiling EAR file through APPC

    weblogic.utils.compiler.ToolFailureException: weblogic.appc failed Warning: Reference wlappc.classpath has not been set at runtime, but was found during build file parsing, attempting to resolve. Future versions of Ant may support referencing ids def

  • How can i get ios5 on my ipod touch?

    Why wont my ipod update to ios5

  • When i buy a app it won't finish downloading

    When i buy a app it says installing but when i go to lanch pad it wont ever finish downloading heres a pick its in top right its bean like that for 3 days and yes i have wifi          

  • 10.5.6 Upgrade

    Hi, after hearing that many people have had some major issues by attempting to install 10.5.6, I thought it would be a good idea to wait until it is "safe" to upgrade my machines however Software Update has downloaded the file automatically & I got a

  • Upgrade from 10.4 5 to 10.5

    I hope this is not a stupid question. How do I go from 10.4.11 to the current version?