Source Obj UD Connect - UDCADAPTERROR::RSSDK|100|Cannot open the connectio

I have problem with UD Connect, it appears a message
UDCADAPTERROR::RSSDK|100|Cannot open the connectio
when I try to open the list of Source Obj UD Connect in the Data Source
Does anyone knows about this issue?
Thansk!

hi All,
anyone has a solution for this problem i am also facing the same issue.
please post the resolution asap.
shiva +91-9731057681

Similar Messages

UD Connect: UDCADAPTERROR::RSSDK|100| error

Hi All,
My RFC connection with J2ee is perfect.
While creating DataSource and while selecting Source Object getting following error.
UD Connect: UDCADAPTERROR::RSSDK|100|Cannot open the connection
Using BI 7.0 SP9.
Thanks,
Nagesh

1. Make sure you have appropriate driver which can connect to target database under visual admin --> server ->services ->jdbc connector .. ( for example name is ORA_DRIVER)
2. Then create or clone from SDK_JDBC under connector 1.0 ( under va -> server --> services --> connector --> connector 1.0 --> sap.com/com.sap.ip.bi.sdk.dac.connector.jdbc ) example SDK_JDBC_XX1
A.... maintain "managed connection factory" properties which connect to your target database system
B... for SDK_JDBC_XX1 --> Resource Adapter under "loader references" "Add" database driver which is decided in point 1 - as library:ORA_DRIVER
Now you maintain your JCO RFC to backend BW system , create UDC connection and you will be able to see SDK_JDBC_XX1 in "name of connector" and while defining extractor you should be able to see table name of target database.
Gautam.

My wifi is connected but when i try to connect to safari it tells me its not connect it says safari cannot open the page because it is not connected to the internet.. but the wifi is on and connected, i have tryed resetting the network settings

my wifi is connected but when i try to connect to safari it says the internet is not connected, i tryed resetting network system but still no luck.

Your iPad sees the WiFi network signal but obviously it is not connected to the network. Try rebooting your router - unplug it for about 30 seconds and then plug it in again.

HT1695 Safari cannot open the page because it is not connected to the Internet

I recently bought iPhone 4 which is still "Locked" for cellular carriers in my country.It's a jailbroken phone.Therefor I connected to internet using a hotspot in my laptop via wi-fi.I'm using windows 7 in my laptop.I was able to connect to the internet without any problem till yesterday,but now I'm getting this error message "Safari cannot open the page because it is not connected to the Internet".I reset my network data and reboot my phone and router several times but still having same problem.I can see the wi-fi icon in my phone with full signal strength.Probably I got this problem after downloading the crack app called "iThemes",but I'm not 100% sure about this.
How can I fix this problem.
Thank you.

Hacking an iPhone is against Apple's license agreement for the iPhone which you have admitted to violating on a forum that is provided and moderated by Apple, and is not supported by Apple directly or indirectly via this forum.
You are on your own - contact whoever you downloaded the hacking garbage from for help with this, which has also made your iPhone very insecure removing all the built-in security included with iOS.

[Flat File Source [2]] Error: Cannot open the datafile "VendorPurchases20050512.txt".

hi
I'm trying to use foreachloop container in order to read the data that i have in several txt files and upload it into MRR table.
when i'm trying to run the package, i'm getting the following error:
[Flat File Source [2]] Warning: The system cannot find the file specified.
[Flat File Source [2]] Error: Cannot open the datafile "VendorPurchases20050512.txt".
[SSIS.Pipeline] Error: Flat File Source failed the pre-execute phase and returned error code 0xC020200E.
I don't know what's the problem since it was working before.In the flat file connection manager i defined all the path including the name of the file.
I'll be happy for assistance
thanks
Yaron

Hi Yaron,
Does the file stored in local file system or a share folder on remote server? If you can load data from a file in local computer, but cannot load data from a file in a remote computer, the issue may be caused by the Kerberos authentication. In this condition,
check the following points:
Enable SQL Server for Kerberos
Check delegation settings for SQL Server service account and Computer
Add Host SPNs for FileShare Server and SQL Server
References:
http://msdn.microsoft.com/en-us/library/dd568720.aspx
http://msdn.microsoft.com/en-us/library/ms191153.aspx
Regards,
Mike Yin
TechNet Community Support

What do i do if my internet is wep and i need it to be wpa2 because my ipod touch 4th gen connects to the internet but when i click on safari or itunes it says safari cannot open the page because its not connected to the internet

what do i do if my internet is wep and i need it to be wpa2 because my ipod touch 4th gen connects to the internet but when i click on safari or itunes it says safari cannot open the page because its not connected to the internet. i have contacted apple support and they said to change from wep to wpa2 but when i change it to wpa2 and type in password and connect on my laptop it says the saved setting on this computer for the network do not match the require ments of the network

My 2nd gen works fine with WPA2 and AES encryption.
You may need to go back and start over. Reset the router back to factory defaults, log on as the admin, set up security, DHCP, and make sure the IP address pool has enough IP addresses to lease to ALL of the computers/devices that will connect to that the router.

When I try to get on the internet thru safari at home, on my network, I get a pop up that says Safari cannot open the page because it is not connected to the Internet. How can this be and how do I fix it?

when I try to get on the internet thru safari at home, on my network, I get a pop up that says Safari cannot open the page because it is not connected to the Internet. How can this be and how do I fix it?

Does the iPod connect to other networks?
Do other device connect?
Did the iPod connect to this network before?
Try:
- Reset the iPod. Nothing will be lost
Reset iPod touch: Hold down the On/Off button and the Home button at the same time for at
least ten seconds, until the Apple logo appears.
- Power off and then back on the router
- Reset network settings: Settings>GeneralReset>Reset Network Settings
- iOS: Troubleshooting Wi-Fi networks and connections
- iOS: Recommended settings for Wi-Fi routers and access points
- Restore from backup
- Restore to factory settings/new iPod.
- Make an appointment at the Genius Bar of an Apple store.
Apple Retail Store - Genius Bar

When i click on safari to use the internet it says "safari cannot open the page because it is not connected to the internet", but i am connected to a wifi network so how do i get safari to work?

when i click on safari to use the internet it says "safari cannot open the page because it is not connected to the internet", but i am connected to a wifi network so how do i get safari to work?

you may be connected to the wireless network but the question is the internet working properly on the wireless network...
what i mean is that i can make a wireless network without the internet so i can save and share files and have other devices connected to the same network access them... but you have to make sure that your internet it running properly... may have to reconfigure the router is your using PPPOE or if it was working prior to your post then try to restart your modem... that usually resolves most issues.

Safari will not open on my iPad Air...."Safari cannot open the page because it could not connect to the server." There were recent updates on my iPad Air. How can I fix this problem?

How can I correct the issue of Safari not connecting on my iPad Air? It was working great 2 days ago.....now on September 20 it is not working! I have an internet connection but Safari will not open. "Safari cannot open the page because it could not connect to the server."

Hello Beckieor,
After reviewing your post, I have located an article that can help in this situation. It contains a number of troubleshooting steps and helpful advice concerning network issues:
iOS: Troubleshooting Wi-Fi networks and connections
Follow these steps to troubleshoot the above issues:
Be sure you're in range of your Wi-Fi router (access point).
Tap Settings > Wi-Fi and turn Wi-Fi off and on. If your Wi-Fi setting is dimmed, follow these steps.
Confirm that your Wi-Fi router and cable or DSL modem are connected to power, turned on, and connected to the Internet. If not, refer to your network administrator or Internet service provider (ISP) for assistance.
Restart your iOS device.
Tap Settings > Wi-Fi and locate the Wi-Fi network to which you're connected.
Tap and Forget this Network.
Try to connect to your desired Wi-Fi network.
Note: You may need to enter your Wi-Fi password again if your network requires one.
Turn your Wi-Fi router off and on2. If your ISP also provides cable or phone service, check with them before attempting this step to avoid interruption of service.
Update your device to the latest version of software.
Update your Wi-Fi router to the latest firmware2. For AirPort Base Stations, install updates using the AirPort Utility.
Thank you for contributing to Apple Support Communities.
Cheers,
BobbyD

Cannot Start Microsoft Outlook. Cannot open the Outlook Window. The set fo folders cannot be opened. You must connect to Microsoft Exchange with the current profil

Cannot Start Microsoft Outlook. Cannot open the Outlook Window. The set fo folders cannot be opened. You must connect to Microsoft Exchange with the current profile before you can synchronize your folders with your Outlook data file (.ost)
OK. This is a new outlook setup on a laptop. The mail account is on a MS Exchange Server 2010. The user can log on to their laptop no problem with their AD login and password. To setup the outlook profile we have checked the name OK. When we click finish
and try to start outlook we get the above error message. It is driving me pots as I have tried also of things. I have tried to connect without catching the files. The error message then says that the Exchange Server is down, yet we checked the name OK and
I can log on to the MS Exchange server and see the setup.
What else is it that I need to look at as I have tried everything. I will add that they one service I see not running is the Exchange RPC service. If I try to start it, it fails saying Some services stop automatically if they are not in use by other services
or programs.
What can I do?

The major cause of this problem is a corrupted Navigation Pane settings file – profilename.xml, where “profilename” is the name of your Outlook profile. A good sign that the
file is corrupted is when the size of the file is shown 0 KB. No one knows the precise reason why this takes place, but all versions of Outlook from 2003 to 2013 may get affected.
Other causes may be when you run Outlook in the compatibility mode, or if you are using a profile generated in an older Outlook version, or if the Outlook data file (.pst or .ost)
was removed or damaged as the result of faulty uninstallation or reinstallation of MS Outlook.
Follow the steps given below to resolve this problem
1. Recover Navigation Pane configuration file
2. Repair your Outlook PST file using Inbox Repair tool
3. Create a new Outlook profil and import data from the old PST file
4. Turn off Compatibility Mode
5. Start Outlook in Safe Mode
For more info, you can visit http://www.ablebits.com/office-addins-blog/2013/12/06/cannot-start-microsoft-outlook-solutions/

When i try to open a web page, a blue screen appears and it is telling me " safari cannot open the page because i am not connected to the internet. i have an iphone, no problem and a laptop with connection - no problem - not sure what the trouble is.

when i try to open a web page, a blue screen appears - message says - sarfari cannot open the page because it is not connected to the internet. i have an iphone - no proble and a laptop - no problem as well.
what is wrong?

There are other things that need attention:
Your above posted system details show outdated plugin(s) with known security and stability risks that you should update.
*Shockwave Flash 10.0 r32
Update the [[Managing the Flash plugin|Flash]] plugin to the latest version.
*http://www.adobe.com/software/flash/about/

I am playing in Pogo and cannot open the games even though the homepage and others will open. The message is THE CONNECTION WAS RESET WHILE THE PAGE WAS LOADING. How do I fix this???

I am playing in Pogo and cannot open the games even though the homepage and others will open. The message is THE CONNECTION WAS RESET WHILE THE PAGE WAS LOADING.
All my friends are playing and it seems I am the only one have this problem.

The "The connection was reset" error message can be caused by a bug fix for the BEAST (Browser Exploit Against SSL/TLS) attack that the server doesn't handle.
*[[/questions/918127]]
*[[/questions/918028]]

I have CS 6 which requests I sign in to access my serial numbers, which I have already, and it fails to connect so that I cannot use the programs. How do I get past this, is there a direct line to customer support?

I have CS 6 which requests I sign in to access my serial numbers, which I have already, and it fails to connect so that I cannot use the programs. How do I get past this, is there a direct line to customer support in the UK?
Thanks

Sign in, activation, or connection errors | CS5.5 and later
Mylenium

Cannot open page Safari cannot open the page because it could not establish a secure connection to the server

Hello Apple Experts!!
I Am Surendra and very new to this forum.. I just came across a problem with my Iphone while connecting to my company WIFI.. we are using Web authentication.. meaning..
The user will try to connect to the wireless network, the client will get the IP address and they are forced to open up the browser to provide the USERNAME and the PASSWORD on the webpage, once they pass the auth they will be able to access to the internet.
The WEB PAGE that asks for the USERNAME and the PASSWORD is HTTPS and for some reason that page is not at all opening and i am getting the below error.. If i disable HTTPS on the cisco Device the IPHONE works great..
Cannot open page Safari cannot open the page because it could not establish a secure connection to the server
This is happening only on the OS 5 and on the OS 4 everything works just great!!
I have a feeling that this has to do something to do with HTTPS / SSL connection with the IPHONE SAFARI or OS 5
Am connecting to Cisco Wireless LAN COntroller and the access point acting as the WIFI devices..
Any help on the same will be much appreciated!!
Regards
Surendra

I'm having a similar issue. Connecting on my iPad FROM ANYWHERE to my work's domain results in the message by the OP.
I checked the ciphers enabled by their page, and this was returned:
High Strength Ciphers (>= 112-bit key)
    SSLv3
      EDH-RSA-DES-CBC3-SHA       Kx=DH         Au=RSA     Enc=3DES(168)    Mac=SHA1
      DES-CBC3-SHA               Kx=RSA        Au=RSA     Enc=3DES(168)    Mac=SHA1
      RC4-MD5                    Kx=RSA        Au=RSA     Enc=RC4(128)     Mac=MD5
      RC4-SHA                    Kx=RSA        Au=RSA     Enc=RC4(128)     Mac=SHA1
    TLSv1
      EDH-RSA-DES-CBC3-SHA       Kx=DH         Au=RSA     Enc=3DES(168)    Mac=SHA1
      DHE-RSA-AES128-SHA         Kx=DH         Au=RSA     Enc=AES(128)     Mac=SHA1
      DHE-RSA-AES256-SHA         Kx=DH         Au=RSA     Enc=AES(256)     Mac=SHA1
      n/a                        Kx=DH         Au=RSA     Enc=Camellia(128) Mac=SHA1
      n/a                        Kx=DH         Au=RSA     Enc=Camellia(256) Mac=SHA1
      DES-CBC3-SHA               Kx=RSA        Au=RSA     Enc=3DES(168)    Mac=SHA1
      AES128-SHA                 Kx=RSA        Au=RSA     Enc=AES(128)     Mac=SHA1
      AES256-SHA                 Kx=RSA        Au=RSA     Enc=AES(256)     Mac=SHA1
      n/a                        Kx=RSA        Au=RSA     Enc=Camellia(128) Mac=SHA1
      n/a                        Kx=RSA        Au=RSA     Enc=Camellia(256) Mac=SHA1
      RC4-MD5                    Kx=RSA        Au=RSA     Enc=RC4(128)     Mac=MD5
      RC4-SHA                    Kx=RSA        Au=RSA     Enc=RC4(128)     Mac=SHA1
This appeared to be a more than sufficient cipher list, yet my iPad won't load any page. I highly doubt it's a problem with SSL2 not being enabled because SSL2 has been deprecated for awhile now.
Any ideas?

IPad2- Safari cannot open the page because it could not connect to the server? Internet works but this message continues to pop up. My iPhone works fine and iPad has been working great until a few days ago.

IPad2- cannot open page, Safari cannot open the page because it could not connect to the server? Internet works but this message continues to pop up. My iPhone works fine and iPad has been working great until a few days ago.
Message is almost acting like a pop up.

Hi
I constantly get same message. When I open up my windows laptop all works fine so I guess it's a bug that apple refuse to admit to.

Source Obj UD Connect - UDCADAPTERROR::RSSDK|100|Cannot open the connectio

Similar Messages

Maybe you are looking for