Source of data for Z fields

Dear Gurus,
What is the source of data for Z custom fields ?
Do we need to create any tables for these fields in the source system ?
Do we call it as enhancement when we add a Z field or populate an existing field (Unused) in the standard data source or user defined (Generic) ?
Can we add Z field to any standard and user defined data sources ?
Points will be taken care.
Regards
Mohan

Hi,
What is the source of data for Z custom fields ?
---> Any standard field or Custom field from the source system.
Do we need to create any tables for these fields in the source system ?
---> Not required.
Do we call it as enhancement when we add a Z field or populate an existing field
(Unused) in the standard data source or user defined (Generic) ?
---> Whenever you add a standard SAP field or Z field that is not in the Delivered version of the Datasopurce, then we call it as enhancement.
Can we add Z field to any standard and user defined data sources ?
---> Yes, you can.
Regards,
Balaji V

Similar Messages

Default Data for Document Fields D_CUII_TYP

Hi experts,
I am trying to define default data for document fields in Export Switzerland.
Source field is G_IMPCN, target field is D_CUII_TYP.
I create the following master data, i.e.
G_IMPCN = 39095000
D_CUII_TYP = FREI
meaning if G_IMPCN is 39095000 then Legal Document Type FREI is being created automatically.
Then I run the default data function on document level but nothing happens.
The log shows G_IMPCN with value 39095000 but D_CUII_TYP = FREI is missing.
Do you have any idea what else I should do to resolve this issue ?
Many thanks for help which is much appreciated.
Best regards,
Corinne

Hi Corine,
Be careful with the logs, they are quite confusing as sometimes it displays the value it is looking for and sometimes the value it has foud. And sometimes the green and red lights are wrong or put in a logic that is confusing.
Most likely it does not find the value because it is looking in the Import numbering in the import scheeme. Did you try with STAWN ? At any rate, if I may suggest, you need to setup the system with having the commodity code in the Declaration, because if you do not have the Scheme CHEXP defined in the Scheme for commodity code you are going to face trouble when trying to retransfer the Tarification to the feeder System.
Keep me posted.
Regards,
Marc

Not getting data for 1 field in ODS

Hi BW Experts,
I am loading the data from R/3 to BW.I have loaded the data through PSA.The data is available in New data field. After activating the ODS, for 1 field the data is not uploaded and in the report, the values are not displaying.
I have checked the Transformations also. it is mapped correctly.But still i am not getting data for that field.
Thanks,
Siva.

Thanks for the Update
1. What is your Service Pack Level?
Service Pack is 0016
2. Are you able to see the data in PSA?
   Yes I can see the data in PSA
3. After load, are you able to see the value in New table?
   Yes i can able to see the data in New data table
4. Anywhere, are you doing the SORTING of Data Package?
   No I have not sorted the data Package.I have not written any coding on this
I have not written any coding in transformation also.
Thanks,
Siva.

How to populate the data for additional fields in custom report of fbl5n tr

hallo friends,
i ha ve to add some fields to the output of custome report of transaction FBL5N.
Till now i have only added the fields to the output.
Now i have to write the code to populate the data for those fields in the program.
1.     Customer Credit Group(ACM/RCM): (Table: KNKK; Field Name: VKORG )
2.     Credit Representative Group: (Table: KNKK; Field Name: SBGRP)
3.     Customer Account Number(CAN#): (Table: KNKK; Field Name: KNKLI)
4.     Alternative Payer(ALTP#) : (Table: KNA1; Field Name: KUNNR)
5.     Risk Category: (Table: KNKK; Field Name: CTLPC)
6.     Credit Info Number: (Table: KNKK; Field Name: KRAUS)
7.     Rating: (Table: KNKK; Field Name: DBRTG)
8.     Payment Index: (Table: KNKK; Field Name: DBPAY)
9.     Credit control area: (Table: KNKK; Field Name: KKBER)
10.     Company code: (Table: KNB1; Field Name: BUKRS)
11.     Sales Organization: (Table: KNVV; Field Name: VKORG)
These are al fields i have to populate in the program..
MY ATTEMPTS:
I tried getting the data for KNKK table by GET KNKK ,but it is giving some garbage values...
And Logical database used here is DDF,and i have to add the VKORG of KNVV too...but KNVV is not there in DDF...
Can anybody tell me how should i proceed..
thanks in advance.

Thnx Andreas,
i have following doubts again..
I have to add sales organisation field to the selection screen...(this is given in the req.)
now if i will say GET KNKK...it would not keep account of this 'sales organisation' field...so how should i fetch the data with these input data( i.e. 'compny code' and 'customer' are the fields given by LDB and 'sales oraganisation' is the field i put it on the selection screen)
And what about the KNVV-VKORG ,because the KNVV is not present in the LDB.

Source of data for custom tables in Oracle Apps

Hi,
Is there any way to find the source of data for the Custom tables. The source can be either any function, procedure, package or a trigger or any other process. The reason why I need to know about it is because we have some custom tables that are used by some custom Reports. Sometimes those reports comes out blank because the data in these custom tables is blank. So I need to know which processes are populating data in these custom tables. Any help would be really appreciated !!
Thanks,
KM

Is there any way to find the source of data for the Custom tables. The source can be either any function, procedure, package or a trigger or any other process. The reason why I need to know about it is because we have some custom tables that are used by some custom Reports. Sometimes those reports comes out blank because the data in these custom tables is blank. So I need to know which processes are populating data in these custom tables. Any help would be really appreciated !!I do not think there is a direct way to find out the source of the data unless your custom processes are documented.
You may enable AutditTrail (search the forum for links/docs) and see if this would help.
Thanks,
Hussein

Which Master data Source is available for the field VBUK-GBSTK (Doc Status)

Hi
Which Master data Source (Attr) is available for the field VBUK-GBSTK (Document Status).
Please help me.
Thanks
Mannev.

Hi
Thanks for your reply.
That is Transaction data source. I want master data source.
Thanks,
Mannev.

How to extract data for these fields from R/3 ?

Hi frnds,
My requirement is to extract the following fields which
are related to MM: Condition type, condition
value, Bill of lading, Qty in external delivery note,
Different invoicing party, Invoicing document from R/3 to
BI. But i found that they are not in any purchasing
datasources or inventory datasources ( Except different
invoicing party but the values are not picking up through
standard extractors ).
Anyone please tell me are there any standard datasources for extracting these fields ?
If not, if i want to enhance datasources for these fields
which datasource do i need to enhance i.e
2lis_02_itm,2lis_02_scl,2lis_02_s012 or 2lis_03_bf,
2lis_03_um ?
Full points will be assigned.
Regards,
Bhadri M.

Hi.......
I think you have filled the set up table..........and you have replicate the datasource also.......and after replicating you have activated in the BI side........
Then it should extract the data............
Are you in BI 7.0...........
You try one thing...............
Replicate the datasource again............and then activate the transfer rules using program : RS_TRANSTRU_ACTIVATE_ALL...........
Also check the selection tab of your Infopackage........may be you are giving some selection.........also check if it is coming till PSA..........if it is coming till PSA.....then check your transformation and DTP.......
It may help you...........
Regards,
Debjani..........
Edited by: Debjani Mukherjee on Sep 21, 2008 11:18 AM

How to populate data for a field in data source

Hi
I have a field(VGBEL) in the data source 2LIS_11_VAITM, but i do not have data in it. I will have to populate data into it for that, I guess i need to write some ABAP code .My question is where should i write the code.
P.S If I have to write in the functional module or user exit how do i know the relavent functional module or user exit for the particular data source
Thanks
Sheetal

HI sheetal,
there will not be different user exit for each datsource. check this thread for the steps, which are general for any datsource.
How to enhance datasources
How to Data source enhancement i.e Transactional data
you need to write your code in function module EXIT_SAPLRSAP_001 .
hope it helps
Regards
Kiran
*do assign points for helpfull answers.
Message was edited by:
ravi kiran naalla

Unable Update profile due request data for "state" field

Anyone else having a problem updating their profile? Once I log-in the site send me page to update my profile. Once I try to click update, it comes back with an error message requesting the "state" field be complete. But there is no "state" field provided or it is not visible.
Who ever create the profile page needs to check their work.

Thank you all for responding.
@ Sushant - We definitly have data in that PSA table linked to the data source (8ZECPCO22 , where ZECPCO22 is the direct update DSO) and this data is what we want to delete through process chains. As mentioned earlier we are able to manually delete these PSA requests via manage of the data source.
Few more detail information below:
ZECPCO22 is the direct update DSO and as per the data flow the data is further loaded from this DSO (data source -8ZECPCO22) into a master data infoobject or other targets via a infopackage and with processing type "PSA and then into Data target in series".
So looking at the infopackage one can definitly confirm that the PSA table is used and since the DSO is a direct update we cant have change log table.
However we are unable to delete these PSA requests through process chains using a "Delete PSA request" nor "Delete Change log Request" process types.
Any suggestion is appreciated.
Warm Regards
Vikram S Reddy

Can't see payload for the ws that is source of data for an omniportlet

Hi,
I have created a simple omniportlet and want to be able to retrieve information from a web service. In the "Source" step of the Omniportlet definition wizard, I specify the wsdl for the web service. I am able to see the method on the web service but I am not able to see the payload for the method. Here are the urls that give you the necessary details. The first url is for a concrete wsdl that I specify as the data source. Clicking on Show Methods, shows me the methods but doesn't show me the payload.
http://139.185.45.130/AIAComponents/CompositeServices/AIADemoCustomerEBS.wsdl
This second url will show you that there is infact a payload for this service.
http://139.185.45.130/event/AIADemo/AIADemoCustomerEBS
Ideas on what could be wrong? I have no problems using the weather service specified in the web center tutorial.
Thanks,
Munazza

Please, can someone help me?
I'm not the only one having this problem:
http://forums.toucharcade.com/showthread.php?t=4670
http://getsatisfaction.com/apple/topics/itunes_application_store_lying
Unfortunately, no answers there.

Enhancement BC Datasource for Master Date - no data for new fields

Hello,
I have a problem. Maybe someone can provide a check list.
I made an enhancement for datasource 0COORDER_ATTR via SAP Exit. The problem is that i do not get data in BW for the new fields but no error occurs. the extractor checker delivers the new data.
the following points i already checked:
- datasource replicated and infosource activated
- "Hide field" and "Field only known in customer exit" are not checked for the new fields

Hi Stefan,
I guess you need to maintain your transfer structure. Edit your transfer rules and click on tab 'datasource/transfer structure'. Move the new fields from the right table (datasource) to the left table (transfer structure). Click on tab transfer rules and map the new field. Activate the transfer rules again.
regards
Siggi

Filter XML Data for Text Fields.

Hi,
I'm trying to display a single record out of an XML database
into dynamic fields in my MovieClip. I need to be able return a
single record based on the current time. Attached is a sample of my
XML data.
I was wondering if this could be acheived with a DataSet
filterFunction? If it is possible, what code would I need to
include?
Finally, do I need to pass my full DataSet to an array or do
I need to filter first & then pass to an array?
Thankyou.
Elton Bernardson.

There's a pattern that almost every wpf dveloper uses and it's called mvvm.
Google it, there'll be a shed load of articles.
It's a passive view pattern in that the view has minimal logic in it.
The view is your window ( or usercontrol).
You can add a listboxitem to the listbox.items collection but i would only do that if it's a very simple static collection.
You can bind a collection to itemssource and the listbox will create a listboxitem for each things it gets from that collection.
It creates them using a datatemplate.
When you do that binding apparently directly to a collection a collectionvie is automagically created between control and collection.
You can explicitly create one of those collectionview things yourself and this is agreat way to filter and sort.
You can also use one of those collectionviews to navigate the collection setting the current item in the viewmodel.
That can be synced in the view so you select an item from the viewmodel.
I think I probably drifted off topic there somewhat.
Mvvm is probably different from stuff you've done before.
It's easier to do a bunch of things using mvvm plus it's what any prospective employer will want.
Along with tdd/bdd it's industry standard.
Big tip: learn it.
You want to avoid showing a user a huge load of data. Not so much for performance reasons but because users can only cope with so much data at a time.
Hope that helps.
Recent Technet articles: Property List Editing;
Dynamic XAML

How to select the latest date for a field in CR?

Dear all expert.
I need to develop a report where it only show the latest date. For example, I had a report, it contain a customer description and bussiness transaction posting date.
Customer description           BT posting Date
A                                          03/10/2010
A                                          15/10/2010
A                                          23/11/2010
A                                          24/12/2010
A                                          30/12/2010
A                                          15/02/2011
A                                           20/03/2011
B                                           20/03/2011
B                                           02/04/2011
B                                           08/04/2011
B                                           11/04/2011
But in CR, i Just wan it to show me:
Customer description          BT posting Date
A                                         20/03/2011
B                                         11/04/2011
I just want to show customer with the latest BT posting Date, How can I do that?
Thank You.

Hi Alex,
If you want to show the data only in Detail other than group then you may follow the following :
--Create a group on Curstomer Descripton
--Createa fromula : Maximum(,)
--Go in Section Expert -- suppress condition -- then give a condition like :
<> Maximum(,) // 'not equal'
This will suppress other dates and give you the latest date on your detail.
Thanks,
Sastry

Using a (tcl) script as source of data for VI

hi,
novice here, under a deadline.
we would like to display data coming from running a shell script. the data is a stream of lines, each with a datapoint as a floating point number.
bash$ ./my.tcl
12.5
15.2
18.3
17.2
14.3
the first tutorial, with a waveform graph and a stop button is what the display should look like (we'll enhance it later).
for input, though, instead of getting a simulated sine signal, we would like to read the output of the my.tcl script.
we found one example, but it calls wish (the tcl interpreter), once and it ends. we need to read a stream continuously.
all this under labview 8.5 for linux (under centos 4, if that matters).
we want to get the basics going. so that is the basic question.
later, once the basics are working, we would like to split what comes out of the script in channels.
the script will spit this out, e.g.:
port0: 10.2
port0: 11.3
port1: 11.2
port0: 13.4
port1: 15.2
you get the idea. multiple channels will be bundled in the standard output and they will need to be demultiplexed. they may come in in bursts (e.g. three readings at a time from port 0, two from port one, ...etc.).
we have some amount of control as to what the output of the script looks like.
we just got started two days ago with labview, and it's cool. however, connecting it to read from the external world in the way that it exists now is what we have not been able to do yet.
any help will be deeply appreciated, as we adopted this solution after dumping the atteempt to use tcl as the front end view, since we would like to do more sophisticated things down the road and labview is great for that.
thanks in advance!
carlos

You need to do that with pipes.
There is some code to do that (OGPipes) but it was never finished (as far as
I know). I recently used it, but it has only support windows. Not much
helpful for you...
What I get from the Linux resources on the web, pipes are a lot easier to
implement then under windows. I might need to do this in a few weeks myself,
but don't have a Linux machine at the moment. Making a library wrapper in C
is probably the easiest way, altough you should be able to call the Linux
libraries for pipes directly from LabVIEW.
Regards,
Wiebe.

BW as a source of data for a third party reporting tool

Hello Gurus,
We have reports developed on a Java application where the data comes in from Cognos-Oracle database and the question is how to get the data from SAP BW instead.Is there a way we can pull in the data from SAP BW queries without using ABAP code or any coding as such or any simple way.
Please help me out with this and you will be well rewarded.
Nikki

check out the answer at ABAP forum
BAPI/RFC - Function module code explanation-VERY URGENT!!!!!
Regards
Raja

Source of data for Z fields

Similar Messages

Maybe you are looking for