Source of the profit center in sd datasources ?

hi all,
I don't have the access to the sap system. Have few queries on the sd datasources ? Can you please advise how will the profit center in the sd ds be determined ? What will I do if the sd datasources don't have the profit center ? Where do I fetch it from ? We have a requirement to add pc in the sd reports ?
My doubt is if the SD DS has a blank pc - and we need to fetch if from the table? Can we fetch it from the VBAP table for that respective SD doc ? What is the VBAP table has a blank PC ? ...each of the sd document has multiple material's, and which material's PC will be considered to extract for that respective SD document ? How will be the priority determined ? Where do I fetch the PC for any respective SD document ? Please advise.
Thank You
DR

Hi Ray,
Profit cntre needs to be picked automatically by the system while creating Sale Order....which depends on the System Configuration of SAP-ECC....You can check the PC for sales order Data in VA03 in ECC. Usually PCs are not changeable...
However you can check in Table VBAP with field PCTRF ..We can enhance the DS and look up PC from this Table....
Even futher SD team should be able to help you.
rgds
SVU

Similar Messages

Error While deleting the Profit Center

Hi I am getting the below error while deleting the Profit center. Please help me how to fix this issue...
Profit center Scenario was activated in New GL Accounting
what configurations do i need to change to fix this error? Kindly advise me..
Thanks
Kishore

Dear,
while deleting the profit center we have to requrie follow the steps
1) OBR1 - Reset Transaction data
2)OBR2 - Reset the master data
3)OKKS - Set Controlling Area
4)OKC3 - Delete Transcation Data
5) KL14 - Delete Activity Types
6)OKE5 - Profit center De - Active
7)OKE1 - Profit center Transcation data delete
8)OKE2 - profit center delete
if if you follow above steps easily we can make the delete the profitcenter and we donot have to activate profitcenter
i hope solve you r problem
With regards /G chandu

Using BADI for changing the Profit Center in FI Document during MIRO

Hi,
We have an requirement of changing the profit center in FI/CO Document while doing MIRO which is different than the one which is posted at the time MIGO.The system is not allowing us to do this and the field profit center during MIRO is not changeble mode and the business requirement is to change this through any SAP enhancements or program.
How can I do this ?
Is there is any standard BADI or User Exit is available for this.
Pleease help me in this and will give valuable points.

Hey,
Use the BADI INVOICE_UPDATE and try with this. Otherwise you try to create Enhancement point to implement your code.
Note: Inside BADI we can't change the runtime value. So, try to use enhancement point.
Rewert back for any clarification.
Regards,
Saravanan M

PS Report with the Profit Center

Hi All
Is there a standard PS Report that will give me values as per the hierarchial structure of the WBS Element and additionally the Profit center also as an output.
Thanks much
RS.

Hi
Some times we do go beyond the question. You can say addon package on foc basis. :). let us not get into aurguement mode and try to share our best experiences to members. There are so many ways and means to accomplish the output so every one is sharing their experiences. By looking at all those possibilities its amazing to see such different approaches being followed.
In my opinion your answer is the best answer in releavnce to the question. You know one thing CN41N is the best report in my opinion still it does not have field PC to view.
Regards,
PSR
Edited by: PSR on Nov 18, 2011 2:33 AM

Regarding the profit center in sales order.

Hi guys,
Actually I am from abap. I got one user exit related to profit center. Plz help me.
My problem is while doing intercompany sales, the profit center will be changed to selling sales organiztion's profit center. but i need the buying sales organization's profit center. Here what i need is how can i find the buying sales organization's profit center in the sales order. it means basing on what i have to find th eprofit center?
Regards
Venkat.

Dear Venkat,
Try These tabels:
MARC Plant Data for Material
/BEV1/RBVBAP                     Sales Document: Item Data
COER                             Sales Order Value Revenue
VBAP                             Sales Document: Item Data
VSVBAP_CN                        Version: Sales document: Item data
VVBAP                            Sales Document: Item Data
GLPPC                            Profit Center Accounting: Plan line items
GLSPC                            Profit Center Accounting: Line Items
Regards,
Naveen.

How to change the Profit Center in Sales Order

Hi Gurus,
Previously they setted the profit center (YB999) in sales order, now i want to change the profit center and need to give the amount into this profit center 100500.
So, could you guide me how to change the profit center in sales order.
Thank you for your replies.....
Thanks & Regards,
Chandrababu.B
Edited by: Chandrababu Naidu on May 25, 2011 12:44 PM

Hi
If this SO is processed partially - i.e. transactions happened - You cant change it
You can use ABAP and change it in Debug mode, but not advisable... Better to short close the SO and open a new SO for Balance qty
br, Ajay M
Edited by: Ajay Maheshwari on May 25, 2011 5:10 PM

Change the Profit Center in Sales Order line item's Account assignment tab

Hi Gurus,
I need to change the Profit Center at Sales order Line item in Account Assignment Tab. Currently The Profit center is coming from Material Master for the Line Item's Material as default but I have to change / overwrite that.
Can any body provide me how can i achive that means
Any User exits, substitution or any thing ?
I tried MV45AFZZ but i am not able to find out the right place where I can change COBL-PRCTR.
Sony

Hi
There is perform which moves the values to VBAP field.
This PRCTR field is stored in VBAP (i.e., SO line item table)
USEREXIT_MOVE_FIELD_TO_VBAP
Hope it works.
VVR

Changing the Profit Center while PO creation

Hi All,
I am trying to update the Profit Center(EKKN-PRCTR) while PO creation using the transactions ME21N and ME22N. I used ME_PROCESS_PO_CUST which is not even triggering and include ZXM06U22, ZXM06U43 which also are not working. Can you please guide me which EXIT or BADI can be used to achieve this requirement.
Thanks in Advance.

Hi
Check the BADI ME_PROCESS_PO_CUST with PROCESS_ACCOUNT AND POST methods.
Refere the link
Re: BADI for Purchase Order
Regards
Sanil Bhandari

Deriving the profit center / segment during Bank Reconciliation

Hi SDN,
One of our requirements is to generate a Financial Statement by Segments.
For this reason, we also need to derive / tag our Bank Reconciliation documents (Manual and Electronic) to the corresponding profit centers or segments. The problem though is that during FF67 or FF_5, there's no way we can enter these data.
At the same time, we can't set a default profit center via FAGL3KEH since these bank accounts may be used for multiple profit centers and not defaulted to one only.
My question now is, can we use the document splitting functionality so that we can "inherit" the profit center / segment from the payment document during bank recon?
To give you an idea here's a sample flow of what we wanted.
Customer Invoice (GL view)      - OK in the system
Dr Accounts Receivable (profit center 1) *inherited
Cr Revenue Account (profit center 1)
Incoming Payment (GL view)     - OK in the system
Dr Incoming Clearing (profit center 1)
Cr Accounts Receivable (profit center 1)
Bank Reconciliation
Dr Main Bank             (profit center 1)
Cr Incoming Clearing (profit center 1)
Currently, system does not inherit the bank reconciliation document to the right profit center. Is there any way we can do this in the system?
Thanks

Dear,
During bank Reco system inherit the Profit Center from the document which it is clearing. There is no need to maintain Default the same in FAGL3KEH.
Please activate splitting at Profit Center level.
Hope this helps!!
Br,Vivek

In which screen the Profit Center field can be seen in SAP CRM Product Master?

Hi SAP Experts,
Please provide your valuable inputs on the below request:
1) Do we have profit center field in SAP CRM Product Master?If yes then in which screen can we see?
2) At the moment we are not using the profit center field in either of the systems(ECC and SAP CRM) in Material, we want to use this then how to go ahead to have this field in CRM.
3) If we add the profit center value in material master in ECC under general and plant data view then how this value will be replicated into SAP CRM , delta load or initial load?
We are using SAP ECC 6.0 and SAP CRM 7.1 systems.
Appreciated for your inputs at the earliest.
Best Regards,
SV

Hi,
Substitution Rule :-
Prerequisite :
1. WBS Level (PRPS-STUFE) = ' 3 ' AND Statistical Indicator (PRPS-XSTAT) = ' X '
Substitute
1. Profit centre (PRPS-PRCTR) - ' '
Hope this will clear you...
Regards,
Hari

Unable to create the Profit center groups

Hi,
We have created new company codes in R3Dev and also created the
validation rules for the same. We have assigned the Set ID's to the
validation rules. These Set ID's gets created when profit center groups
are created for the new company codes.
We have transported the company code configuration settings and the
validation rules to R3QA.
Now in R3QA, when I try to create the profit center groups in KCH5N for
the new company codes, it says "the group already exists".This is
caused due to the SET ID's which also got transported along with
validation rules. I have checked the table 'SETHEADER" which shows the
SET ID's for the new company codes.
Could you please a solution to resolve this issue.
Thanks
Rakesh

Hi Mohan,
Since Set Id's have moved to quality along with vaidation rules, I am to create the profit center groups, as it says the group already exists. I believe the set Id's need the master data maintained in R3Q, before they are transported. Since this is not maintained, with the transport, the data is sitting for Set Ids at the table level (Table: SETHEADER), because of which I am to unable to create the profit center groups.
Thanks,
Rakesh

Requirement to populate the Profit center field of Vendor line item thru...

Hi,
My requirement is to populate the Profit center field of Vendor line item.
For this, I want to write a substitution where based on the Business Area of Vendor line item, the system should populate the Profit center while saving.
Is it possible thru Validation & Substitutions...
Plz guide me in writing this
Points will be suitable rewarded for replies.
regards
AVM

Tcode: GGB1
An example shows how to make a G/L account available for line item substitution.
GGB1
Click FA Doc Header
Click Create Substitution icon
Enter the Text
Click Create Step icon
Click the field u want Say - BKPF- BKTXT
Choose the option Say :Constant value
Give description of ur step
Click Prerequisite
Double Click Structure BKPF
Double Click BKPF-AWKEY
Click Constant button
Enter the Text u want to make it appler in the Reference key
Click Substitution and enter the constant value u want
Go to Tcode: GGB4
Click Substituted Fields
Give ur table and field (Here - BKPF- BKTXT)
Do it in a similar way..if u cannot proceed, let me know the exact field values..and i can take screenshots and send u across
Thanks,
Sridevi

The extraction of the profit center & the cost center

Hi all,
Can anyone share the extraction document with me regarding the profit center and the cost center? Thank you for help.

Hi,
I hope, These two infoobjects do not have any deviation in the extraction of data to other Infoobjects.You can do population in as usual manner.
Are you getting any difficulty in this process?
With rgds,
Anil Kuamr Sharma .P

Ledger Balance As Per the Profit Center Wise

hi experts,
is there any standard SAP function Module which retries the Balance of
G\L Account as per the profit Center ?
Thanks & Regards
srinivas

Dear Srinivas,
Try these Bapi..
BAPI_AR_ACC_GETKEYDATEBALANCE
BAPI_PROFITCENTER_GETDETAIL
BAPI_PROFITCENTER_GETLIST
Hope this will help you to solve your problem.
Regards,
Vijay

To Populate the profit center field in the sales order by user Exit.

Hi All,
Please let me know :
How the user exit is used to populate the Profit center field in the Sales order?
Please gurus answer as quickly as possible as I require this urgently.

If you want to overwrite the profit center in sale order (determined from the materail master) with a different profit center based some other criterion you can use profit center substitution rules. Check the wiki:
[Profit Center Substitution in Sales Orders|https://www.sdn.sap.com/irj/sdn/wiki?path=/display/erplo/profitCenterSubstitutioninSales+Orders]
Regards,
GSL.

Source of the profit center in sd datasources ?

Similar Messages

Maybe you are looking for