Source of the triggered mail in SAP (SCOT)

Dear ALL,
Would like to know any information on possibility to find the source of the triggered mails in SAP.
The requirement is to inform the concern team members about the failed mails with status 855 and to remove invalid mail id from the recipient list, with information on, from which transaction the mail has been triggered.
your valuable suggestions would be helpful.
Thank you
Chaitanya

Dear Mr. Deepak,
Thank you for the reply.
Information of the sender is available, but the requirement is to find the transaction/report name from which the user has triggered the mail.
suggestions for the same would be helpful.
Thank you
Regards,
Chaitanya

Similar Messages

  • Cc header in the triggered mail  using  receiver mail adapter

    Hi,
    How can we  have cc option in the triggered mail using receiver mail adapter.
    message protocol is  XI payload with mail package.
    thanks,
    Ramya Shenoy

    Hi !
    Check this link:
    http://help.sap.com/saphelp_nw04s/helpdata/en/6b/4493404f673028e10000000a1550b0/frameset.htm
    under the title:
    "Mail Attributes for Message Protocol XIPAYLOAD"
    Regards,
    Matias
    ps:please award points if helpful.

  • Receiving the Workflow mail in SAP Inbox/Outlook

    Hi SAP Experts,
    I have situation, where I am receiving the PR-PO workflow mails for the approval. I am not authorized for it and also not assigned in any of the table maintained and used for picking the approver for PR-PO workflow approval.
    Please advice me how to proceed in stopping it.
    Regards

    Authorization for approval is independent of workflow allocation, even it does not make much sense in this case.
    The worklfow assignment can be made by user or by organisation data, like department or workgroup.
    if that is done, then everybody in the group receives the workflow item in his inbox.
    But only the one how has authority for approval can release the PR/PO.
    So you need either be removed from this group, or a different assignment has to be made for the release group to workflow assignment .

  • Encrypted mail from SAP

    Dear All,
    Please let me know is it possible to send the encrypted mail from SAP as well as the procedure to do?
    Best Regards
    Vikas

    Did you check the Note provided by Mike? Your query has been described there very clearly. Please check the description in the content of the note and let us know the part which is confusing to you.
    regards,
    Dipanjan

  • Problem in Triggering the Mail to SAP Inbox

    Dear Experts,
                     I have a problem for triggering the Mail option to SAP Inbox.
    We created a Job assigning the program RSEIDOCA,RSWUWFML2 by creating a variant for those programs. We are scheduling the job,  It is showing as
    24.11.2010 12:43:46 Job started                                                                     00           516          S
    24.11.2010 12:43:46 Step 001 started (program RSEIDOCA, variant ZRSEIDOCA, user ID__ )        00           550          S
    24.11.2010 12:43:48 Error situation found by evaluation                                             E0           596          S
    24.11.2010 12:43:48 Step 002 started (program RSWUWFML2, variant ZRSWUWFML2, user ID__)      00           550          S
    24.11.2010 12:43:49 Job finished                                                                    00           517          S
    But while checking in SOST, we are unable to see those mails. eventhough the user is unable to get those mail in SAP INBOX.
    I think, is there any authorization problem while triggering the mail for that particular user id.. Please tell me the solution, this is very high requirement for me.
    Thanks in Advance.
    Regards,
    Srini

    Hi Chandra,
              Thanks for your reply. Actually i am not workflow consultant, thats why i asking this question. Where to assign the Receipient Type and Recipient Notification.
    you give Recipient Type as position and Recipient of Notification must be position of the reciepient,
    Regards,
    Srini

  • This is regarding CBMA in SAP PI 7.3.1. I have set up the alert mail using default java mail client.I do receive the alerts via mail. But my requirement is to direct all the mails to Business workplace inbox in ECC.

    This is regarding CBMA in single stack SAP PI 7.3.1. I have set up the alert mail using default java mail client.I do receive the alerts via mail. But my requirement is to direct all the alert mails to Business workplace inbox in ECC.
    So I need to set up PI to redirect mails to ECC Business workplace user inbox (sbwp). From here rules are set up & routed per distribution list.
    Please guide me how I can achieve this requirement.

    Hi,
    yes, it is a little bit different. This is the issue.....  
    But I am not sure if your links will help:
    1) /people/william.li/blog/2008/02/13/sap-pi-71-mapping-enhancements-series-using-graphical-variable
    is about a different solution. I do not need to count the number of lines of the source message.
    And the second variable is about concat line by line from unbound node to unbound node.
    My issue is:
    Souce:
    Message line (0...unbound) ! ! ! ! ! ! ! !
    .    ResultLine   (1..1)
    Mapping:
    =>   ResultLine1
           ResultLine2
           ResultLine........          => into UDF to an element  (1..1) in one mapping operation.
    So that all "ResultLine"s are included.
    The result is explained in the given link for Mail attachment with UDF.
    So I am not sure how to use this thread for my issue.
    In the comments of that blog Christoph Gerber writes that the new variable feature can only handle single values.
    So it is not suitable for my purposes as I have a list of values here that needs to be moved into the target message field.
    2) http://wiki.sdn.sap.com/wiki/display/Java/UsingEditJavaSectioninMessageMapping
    shows where to find the button "Java section" which is not available here in 7.1
    3) /people/sap.user72/blog/2005/10/01/xi-new-features-in-sp14
    too is about the nice little button for Java Section that is no longer existing on PI 7.1 screen for mappings.  
    So my issue is: How to replace the Java section function with global variables in PI 7.1?
    Best regards
    Dirk

  • Reply from the notifiaction mail (from outlook) to sap Inbox

    HI
    I have a requirement where in I am sending a notification mail to user saying Document verification is OPEN(pending) in your name.1s he finshes that task he will reply to the same mail saying ClLOSED.
    Now can we get this mail reply to SAP Inbox of the reply receiver ?
    And If yes How can we process that either by subject or body content to close that activity.
    (We dont want to send workitem shortcut to the user,This will make us not to involve user into SAP S\W)

    Hi- you could refer below thread
    http://forums.sdn.sap.com/thread.jspa?threadID=2132333
    vinoth

  • Document for configuration of the spend management in SAP E-Sourcing

    Hi All
    Is there any document for configuration of the spend management in SAP E-Sourcing 5.1
    I have checked the RG section of the application and also all the documentation delivered as a part of the ESO software download
    Unable to locate this, request you to redirect me to the link on the service marketplace from where I can download this, as far as I know, its not available there.
    Currently I get the following error mentioned below for every menu option clicked under the spend and Compliance Tab
    Error: The spend analysis environment is not ready to provide spend data
    Request feedback
    Regards
    Tridip

    Hi Kamalakar
    This is great piece of information, I checked the same place i found the following
    Module Name
    Auctions License       
    BOM License       
    Contracts License       
    Demand Aggregation License       
    Frictionless SRM Product License       
    Optimization License       
    Projects License       
    RFQuick License       
    RFx License       
    SRM Explorer License       
    XPress Print License
    Do you think am missing the spend license, whats that called, request you to let me know
    Regards
    Tridip
    Edited by: Tridip Chakraborthy on Apr 15, 2009 8:48 PM

  • Problem  while sending the mail from sap

    Hi experts,
                     I am facing some problem while sending mail from sap to external mail.
    this is th code i am using but it is not working. plz check and tell me.
    REPORT  ZMAIL_DEMO.
    data: maildata type sodocchgi1.
    data: mailtxt type table of solisti1 with header line.
    data: mailrec type table of somlrec90 with header line.
    start-of-selection.
    break-point.
    clear: maildata, mailtxt, mailrec.
    refresh: mailtxt, mailrec.
    maildata-obj_name = 'TEST'.
    maildata-obj_descr = 'Test'.
    maildata-obj_langu = sy-langu.
    mailtxt-line = 'This is a test'.
    append mailtxt.
    mailrec-receiver = 'SOME MAIL ID'.
    mailrec-rec_type = 'U'.
    append mailrec.
    call function 'SO_NEW_DOCUMENT_SEND_API1'
    exporting
    document_data = maildata
    document_type = 'RAW'
    put_in_outbox = 'X'
    tables
    object_header = mailtxt
    object_content = mailtxt
    receivers = mailrec
    exceptions
    too_many_receivers = 1
    document_not_sent = 2
    document_type_not_exist = 3
    operation_no_authorization = 4
    parameter_error = 5
    x_error = 6
    enqueue_error = 7
    others = 8.
    if sy-subrc = 0.   "( did not receive any mail) *
    write : 'mail sent'.
    endif.

    Hi,
    Please check with the following code.
    TABLES: KNA1.
    data for send function
    DATA DOC_DATA  LIKE SODOCCHGI1.
    DATA OBJECT_ID LIKE SOODK.
    DATA OBJCONT   LIKE SOLI OCCURS 10 WITH HEADER LINE.
    DATA RECEIVER  LIKE SOMLRECI1 OCCURS 1 WITH HEADER LINE.
    SELECT * FROM KNA1 WHERE ANRED LIKE 'C%'.
      WRITE:/ KNA1-KUNNR, KNA1-ANRED.
    send data internal table
      CONCATENATE KNA1-KUNNR KNA1-ANRED
                             INTO OBJCONT-LINE SEPARATED BY SPACE.
      APPEND OBJCONT.
    ENDSELECT.
    insert receiver (sap name)
      REFRESH RECEIVER.
      CLEAR RECEIVER.
      MOVE: 'any_email'_ TO RECEIVER-RECEIVER,                " SY-UNAME
            'X'      TO RECEIVER-EXPRESS,
            'U'      TO RECEIVER-REC_TYPE.
      APPEND RECEIVER.
    insert mail description
      WRITE 'Sending a mail through abap'
                     TO DOC_DATA-OBJ_DESCR.
    CALL FUNCTION 'SO_NEW_DOCUMENT_SEND_API1'
         EXPORTING
              DOCUMENT_DATA              = DOC_DATA
         IMPORTING
              NEW_OBJECT_ID              = OBJECT_ID
         TABLES
              OBJECT_CONTENT             = OBJCONT
              RECEIVERS                  = RECEIVER
         EXCEPTIONS
              TOO_MANY_RECEIVERS         = 1
              DOCUMENT_NOT_SENT          = 2
              DOCUMENT_TYPE_NOT_EXIST    = 3
              OPERATION_NO_AUTHORIZATION = 4
              PARAMETER_ERROR            = 5
              X_ERROR                    = 6
              ENQUEUE_ERROR              = 7
              OTHERS                     = 8.

  • When PO workflow is triggered i get the following mail to my inbox

    Hi Experts,
                     When PO workflow is triggered i get the following mail to my inbox
    Error processing following event linkage:
    BUS2012 RELEASESTEPCREATED WS90000001
    Following error occurred:
    SWF_RUN 594
    Message text:
    Import container contains errors (are any obligatory elements missing?)
    Event container appended as attachment.
    Event linkage not changed.
    Event stored temporarily.
    Events can be redelivered via event queue
    administration (transaction SWEQADM).
    Please suggest me how to correct this error.
    Regards,
    Dheepak

    Hi,
    This happen when the release code value is not passing in to the Event Container.
    Check the event Binding, Re-generate, Save & activate it.
    See this [Thread|workflow inbox level  given  message Error in event receiver .;.
    Regards,
    Surjith

  • SAP System copy without shutting down the source and the target system

    Hi,
    We need to need to System refresh without shutting down both the source and the target system, i read the docs from SAP looks like we need to shutdown the source system during export and import phase, is there any way to do the system refresh without shutting down the system.
    Sathish

    Hi,
    Think a little bit about what is a database and you'll get the answer that what you "need to need" is impossible.
    Of course it is possible to keep the source running (hopefully, because ususally it is the production system !) by using an online backup, but you need to stop the target system because you will restore a backup on it.
    If you use the export/import way, you have to stop both source and target system.
    Regards,
    Olivier

  • Sending Mail from SAP to External Source

    Hi Experts,
    We are on ECC 6.0. I have configured the standard SAP system for
    sending mails from within SAP to our company mail server. The
    mails from SAP are going successfully to our official company
    ids, But when i am trying to send mails to outside address like
    eg. " email@removed " or " email@removed ", it is not going and
    giving an error recipient unknown.
    The configuration of SAPConnect is correct because mails are
    going successfully to our company id, to send outside do i need
    to do something extra???

    It's Mail Relaying and it allows a mail server to send email (or relay it) on behalf of other systems. Many companies have relaying turned off because it is a security risk.
    For example, allowing relaying will allow your system to send an email from xxx.com though your email server which manages emails for company.com. This could be used by a rogue to send spam through your email server.
    Also, if you try to send an email from an account that your mail server does not handle some receiving servers may assume it is spam and block it.
    For this reason, only allow mail relaying on the email server for your domain and only from the SAP systems. This will prevent abuse from occuring because relaying is enabled.
    Have you set the default domain for SAPconnect:
    [http://help.sap.com/saphelp_nw04/helpdata/EN/00/7c9962df8111d3a36400a0c943858e/content.htm]
    Microsoft note on SMTP Relaying:
    [http://support.microsoft.com/kb/304897]

  • Send SMTP-Mail from SAP with URL to the Workplace Inbox

    Does anybody knows how I can create an URL adress within an E-Mail (which is generated in a step in workflow) to provide the receiver an direct access to his SAP-Inbox.
    Logon-data must not be included.
    thanks to everybody

    Hi,
    What is the nature of the URL you wish to include in the e-mail ?
    Is it fixed or dynamic ?
    Cheers
    Colin.

  • How can i autoforward that mail from SAP INBOX to the outlook

    Hi ,
    My Requirement is that,
    I have to send an email to outlook, whenever PO Created in SRM System
    I have created  custom workflow, i have added a sendmailtask step, i given the SAP userid to send SAP Mail to the user.
    It is sending SAP Mail to the User to his inbox perfectly.
    Now, how can i autoforward that mail from SAP INBOX to the outlook. This is has to work for all users.
    Please give some suggestions. ot it can be achived any other way.
    Note: This is Email Message not a workitem.
    I have doubt that RSWW program will work only for workitems.*
    Thanks & Regards,
    Suresh.

    Hi ST,
    what I understand from your requirement is that you are able to send messages using SendMail Step to SAP Inbox and now you want it to be sent to users Outlook.
    Here you need to create a container which would store users email address of Outlook (which would be stored in SU01 or in a ztable), use this container in your Send Mail step and in the Recepient Type as email.
    Hope it helps.
    Aditya

  • User couldn't recieve the mail from SAP SYSTEM

    Hi all experts,
    User couldn't recieve the mail from SAP SYSTEM since the Unicode changes were pushed ,
    how to fix the issue ?
    Thanks & Best regards,
    Michael

    Hi Michael,
    Is the SAPConnect configured as per note [455140|https://service.sap.com/sap/support/notes/455140] ?
    Since you are talking about receiving emails, do you see the emails in SOIN transaction (or report RSBCSIN)? Have you tried telnet directly to the SAPConnect plugin as described on note [607108|https://service.sap.com/sap/support/notes/607108]
    What is the value of parameter is/SMTP/virt_host_<*>?
    Regards,
    Tiago

Maybe you are looking for

  • Digital Signatures and Email Encryption on iPhone

    One of our clients has implemented a policy whereby all email communications with vendors must be digitally signed and encrypted. I know SSL allows the iPhone to create an encrypted connection to the email server. However, is there a way to actually

  • XSLT TRIM Function

    Hi, We are into XSLT mapping, we had a requirement like below; Note: Transformation Between A to B: if value(A) NOT NULL then left(right(rtrim(VALUE),3),2) - > B How can we develop the similar function in XSLT?!! Thanks n Advance., Stallin

  • Where to find fonts for Photoshop?

    I've found websites that let you add brushes to Photoshop. Can the same be done for fonts (besides purchasing thru Adobe)? If so can you recommend some? The ones I have found look fishy and don't want to download a virus. Thanks

  • Phase One P45+ files won't work in 1.1

    Does anyone know why my P45+ files aren't supported in Lightroom 1.1? When will they be supported? Many thanks! Eleanor

  • Photos stored on my Mac's hard drive?

    Where are my photos stored on my Mac's hard drive?