Source Safe causing LabVIEW Quick Start Screen to not appear after closing open vi windows?

Hey All,
We've recently implemented Source Safe version control for LabVIEW on XP and I've noticed that LabVIEW is hanging between closing open vi windows and showing the Quick Start Screen. The usual pattern is for the Quick Start window to appear after the last open vi window is closed. Instead the vi window is closed, the tab at the bottom of the screen says debug development and the Quick Start Screen does not appear, the tab does not read "Getting Started."
I think it is a LabVIEW <--> Source Safe issue when I do a Task Manager Exit on the LabVIEW process that I sometimes see a dialog box asking if I want to save changes in memory to disc and those files are not checked out. But it is too late at that point to do anything as XP clobbers the application before I can do anything.
Anyone else have this issue?
Message Edited by Drewski on 05-30-2008 02:28 PM

What LabVIEW version do you use?
I have used SourceSafe in every version from 8.0, and in the way some bugs are resolved.
Ton
Free Code Capture Tool! Version 2.1.3 with comments, web-upload, back-save and snippets!
Nederlandse LabVIEW user groep www.lvug.nl
My LabVIEW Ideas
LabVIEW, programming like it should be!

Similar Messages

APP BAR ON START SCREEN DOES NOT APPEAR - SO I CANNOT NAME OR CREATE GROUP NAMES

HELLO, COULD SOMEONE TELL ME IF THEY KNOW OF THE FIX FOR MY APP BAR ISSUE? I AM TRYING TO CREATE GROUP NAMES FOR MY APPS. I HAVE THEM ORGANIZED, I CLICK THE LITTLE MINUS BUTTON AT THE BOTTOM RIGHT HAND CORNER (OR PINCH THEM TO DOWNSIZE) SO THE
APPS GET SMALL, BUT YET WHEN I RIGHT CLICK ON A GROUP TO GET THE APP BAR TO COME UP IT DOES NOTHING. I LEFT CLICK ON THE GROUP OF APPS AND THEY GO BACK TO NORMAL SIZE...ANY SUGGESTIONS?
THANKS!

Hi,
For this problem, you can try to use system restore to revert your system to a former normal time point for test:
How to refresh, reset, or restore your PC:
http://windows.microsoft.com/en-us/windows-8/restore-refresh-reset-pc
Please remember to mark the replies as answers if they help, and unmark the answers if they provide no help. If you have feedback for TechNet Support, contact [email protected]

Welcome screen does not appear when I open Elements 10

Following installation of a new hard drive, I re-installed Elements 10. However, I now don't get the Welcome page when I open it. It goes straight to EDIT. This never happened before. How do I change this so that the Welcome page appears? I have un-installed and re-installed Elements, but that has made no difference.

Hi,
Glad you have got it working.
The preferences are never touched when you uninstall elements. In the majority of cases this is an advantage in that you can reload the code without affecting your settings.
If you need to reset the preferences, there are ways to do it. Occasionally it is necessary to reset them when strange things happen.
Some people have trouble with Welcome screen and it became known as the Unwelcome screen. In that case they use shortcuts direct to the application of their choice. I tend to have a shortcut direct to the organizer because that is where I always start from.
Good luck,
Brian

Start screen does not exist in batch input data

I'm using .NET Connector calling Rfc_Call_Transaction funtion throught a proxy, i stablished all the params as you can see in the code below, but i get the message cited in the subject 'Start screen does not exist in batch input data'.
What do you think is happening? or Where can i get the samples needed for perform this type of request?
        private BDCDATA FillBDCDATA(string Program,
                                    string Dynbegin,
                                    string Dynpro,
                                    string Fnam,
                                    string Fval)
            BDCDATA st_DATA = new BDCDATA();
            st_DATA.Program = Program;
            st_DATA.Dynbegin = Dynbegin;
            st_DATA.Dynpro = Dynpro;
            st_DATA.Fnam = Fnam;
            st_DATA.Fval = Fval;
            return st_DATA;
        private void button3_Click(object sender, System.EventArgs e)
            SAPProxy proxy = null;
            try
                proxy = new SAPProxy("ASHOST=" + txtHost.Text +
                    " SYSNR=" + txtSysnr.Text +
                    " CLIENT=" + txtMand.Text +
                    " LANG="   + txtLang.Text +
                    " USER="   + txtUser.Text +
                    " PASSWD=" + txtPass.Text);
            catch(Exception excpt)
                txtMsg.Text = excpt.Message;
            if (proxy == null)
                return;
            BDCDATATable tblBDCDATA = new BDCDATATable();
            MESSAGEINF infMessage = new MESSAGEINF();
            //BDCDATA st_DATA = new BDCDATA();
            tblBDCDATA.Add(FillBDCDATA("SAPMKBUA", "0111", "0111", "BDC_OKCODE", "/00"));
            tblBDCDATA.Add(FillBDCDATA("SAPMKBUA", "0111", "0111", "BPDY-BLDAT", "30.12.2004"));
            tblBDCDATA.Add(FillBDCDATA("SAPMKBUA", "0111", "0111", "BPDY-VERSN", "0"));
            tblBDCDATA.Add(FillBDCDATA("SAPMKBUA", "0111", "0111", "FMPS-FIKRS", "ente"));
            tblBDCDATA.Add(FillBDCDATA("SAPMKBUA", "0111", "0111", "BPDY-JAHR", "2005"));
            proxy.Rfc_Call_Transaction("FM9J","", out infMessage, ref tblBDCDATA);
            txtMsg.Text = infMessage.Msgtx;

Jose,
I imagine you are passing, for the Dynbegin parameter of the private method FillBDCDATA, invalid values.
Why don't you try this way:
tblBDCDATA.Add(FillBDCDATA("SAPMKBUA", "X", "0111", " "," "));
tblBDCDATA.Add(FillBDCDATA(" ", " ", " ", "BDC_OKCODE", "/00"));
tblBDCDATA.Add(FillBDCDATA(" ", " ", " ", "BPDY-BLDAT", "30.12.2004"));
tblBDCDATA.Add(FillBDCDATA(" ", " ", " ", "BPDY-VERSN", "0"));
tblBDCDATA.Add(FillBDCDATA(" ", " ", " ", "FMPS-FIKRS", "ente"));
tblBDCDATA.Add(FillBDCDATA(" ", " ", " ", "BPDY-JAHR", "2005"));
I hope I could help you.
Regards,
Daniel Carvalho

Print screen will not appear app crashes

print screen will not appear on any app and the given application that I am trying to print from crashes. but I can see thye printer in the setup utility tried resetinmg the utility that did not help any suggestions.

Hello and Welcome to Apple Discussions...
Try booting from your install disk and run Disk Utility.
Insert Installer disk and Restart, holding down the "C" key until grey Apple appears.
Go to Installer menu (Panther and earlier) or Utilities menu (Tiger and later) and launch Disk Utility.
Select your HDD (manufacturer ID) in the left panel.
Select First Aid in the Main panel.
*(Check S.M.A.R.T Status of HDD at the bottom of right panel. It should say: Verified)*
Click Repair Disk on the bottom right.
If DU reports disk does not need repairs quit DU and restart.
If DU reports errors Repair again and again until DU reports disk is repaired.
When you are finished with DU, from the Menu Bar, select Utilities/Startup Manager.
Select your start up disk and click Restart
While you have the Disk Utility window open, look at the bottom of the window where you see Capacity and Available. Make sure there is always 10% free disk space. Not enough disk space can cause directory corruption.
Carolyn
Message was edited by: Carolyn Samit

HT3867 I am connected to the hotel wifi network, but the login screen does not appear.

Hi,
I am connected to my hotel wifi network, but the login screen does not appear. I am able to access the login page on my PC, but on the iPhone it does not appear and just tries to connect to the webpage (e.g. google.co.uk), and eventually gives up. I've tried opening pages in Safari and Chrome, but none cause the login screen to appear. I have also tried trying to log into the login page that the PC opens when connected to the wifi, but the same thing happens. I am using a iPhone 3G with the latest iOS version 6.0.1.
Is there a way to make the iPhone try to open the login page?
Ben.

I have the exact same problem as the original poster and I tried many times already the solution proposed by trstark66 and it's still not working. It's not working for both my iPad and iPhone 5. I'm using the latest iOS version available all the time. I have my iPad since 3 years and my iPhone since 1 years and I always had that problem. I'm an airline pilot so I'm always in hotels. I asked my colleagues who also have iPhones and iPads and they all have the same problems from time to time. And when I go in an apple store they all say that it's the first time they hear about that problem. I never have that problem with my PCs, my previous phone and my BB playbook. Only with my iPhone and iPad....since now 3 years...Always the same problem. I'm connected to the Hotel Network, I have an IP address but nothing popup to register with a user name, password or just to access the "I have read and accept the condition.../connect". And when I go in Safari or other Browsers, I am not redirected to a login page. All I have is a message saying cannot access the webpage because I'm not connected to Internet. I tried already hard resets, on/off Wi-Fi, automatic connexion off, forget this network, reset network setting...
My solution for now is to use my Boingo account. I connect to the hotel Network and then I use the Boingo app to connect to Internet.
But, sometimes it works the first time or suddenly for no reason.
Very funny, I was using Boingo on my ipad to write this message in my Hotel room because I was unable to use my free connection as usual. When I tried to press "Add Reply" it failed and I had the message "An error occured while trying to submit your post, please try again". The reason was that boingo was disconnected since I was taking too long to write this message. So I wasn't connected to Internet anymore. I opened a second tab in Safari and what did I see!... the login page to access the free connection from the hotel. This is crazy. Apple, you really suck with hotel/coffee hotspots... I tried for hours and nothing, now hours later I just open a new tab and it works. But tomorrow I know I will try the same and it will not work again. It shouldn't be that complicated.

My back button does not work because the prior screen does not appear in the history. I therefore must go back to the blue screen and reload safari. Apple tech support could not help. Can anyone else help?

After I installed mountain lion my back button frequently does not work because the prior screen does not appear iunder History. Apple tech support was not able to fix the problem. Does anyone have any suggestions?

lbryan1987 wrote:
I dont want the button problem solved i need to know how to restore the phone without using that button or going into settings
You don't in the condition it's in. You will either have to get the phone replaced by Apple or pay a 3rd party to repair it.
there seriously should be more than two ways to solve this other wise apple is useless and we will never buy another apple product.
Seriously? It's physically broken!

Bex selection screen does not appear when running workbook via RRMX.

Hi Experts,
I have following problem: When I run a BEx workbook from a user menu (trans. RRMX), I get no selection screen, but just the workbook with text: "no data found". When I press the refresh button (variable change button), the selection screen appears and after that the data are visible in the workbook. When I run the underlying query the selection screen appears normally. With some other workbooks with selections I do not have such a problem.
Anybody can give me a hint how to get the selection screen diplayed? We are on BI 7.1, Bex SP 10, patch 1.
Thank you,
Michal

Dear Michal,
Your Question:
Anybody can give me a hint how to get the selection screen diplayed? We are on BI 7.1, Bex SP 10, patch 1.
Answer:
Open the workbook and goto workbook setting from the analyzer design toolbar.
Check the Refresh workbook on check box.
So every time the selection screen will be appear after exectuion of the workbook.
Thanks & Regards,
Praveen.K

Query Selection Screen does not appear in Web Analyzer

Hi Experts,
Query Selection Screen appears when we open the query in Bex Analayzer in production system. But when we open the query in ABAP or JAVA Web view, the selection screen does not appears.
As the volume of data in the cube is very high, and since the selection screen is not appearing, the query extracts 1.5Mrecords and results in dump.
Kindly let me know the possibility for selection screen not appearing.
Note: The selection screen appear in Development system in Bex Analyzer, ABAP View and Java View
Regards
Suresh Kumar

Dear Suresh,
You can check if the parameter &VARIABLE_SCREEN=X is added to standard template or not, If not add this,
In order to add this parameter in the webtemplate you have to change 0ANALYSIS_PATTERN and save it as ZANALYSIS_PATTERN and enter this standard web template under TCODE RSCUSTV27.
Also I would like to explain you the behavior of Web Analyzer,
Parameter VARIABLE_SCREEN=X only influences the WEB application at startup. This will not come into affect
when you use the 'New Analysis' button. The 'New Analysis' button resets the dataprovider so this would not
affect the variable screen and would not redisplay the variable screen as you require.
Regards,
Arvind

Log-In Screen Does Not Appear When Resuming From Standby/Sleep

We are running T400s with XP SP3. From time to time when the computer comes out of standby the login screen will not appear. You just get the background image and your mouse. The mouse will move across the screen. However there is no screen saying press Ctrl+Alt+Del or swipe a finger to login. Also swiping a finger, or pressing ctr+alt+del, typing in your password and hitting Enter does not work either. It seems to be a random but frequent occurence. The couple of T400s with Vista installed do not have this problem. Any ideas?

After doing some troubleshooting I narrowed it down to the FingerPrint reader software. Sure enough after uninstalling it fixed the issue but then the finger print reader is useless. I looked at the latest Version, 3.2.0.116, readme file and it states:
<3.2.0.116>
- (Fix) Fingerprint Reader is not working ater 1 minute idle.
- (Fix) Fingerprint Reader is not working after standby/resume.
I am wondering if they are still working out the bugs, nothice the "l" missing from later. Any help would be a big plus as I need to roll out about 200 or so for my employer in the next month.

ITunes screen does not appear when I try to open

ITunes screen does not appear when I try to open. I can play music by using "controls" but screen does not open.

What did your email provider say about it when you contacted them?

My ipad is password protected and i can't remember the password. when I try to restore it, the itunes restore plugin screen will not appear on my ipad. I have tried to shut down, plug in, and hold down the home button method and get nothing.

my ipad is password protected and i can't remember the password. when I try to restore it, the itunes restore plugin screen will not appear on my ipad. I have tried to shut down, plug in, and hold down the home button method and only get the password screen again on the iPad. Any suggestions??

tried all that and was looking good with new software etc downloaded and then got a message in iTunes."we're sorry we are unable to conitue with your activation at this time etc " tried process again and got to the same message. iPAD still has the connect to it tunes screen ..any suggestions?

JAX-RPC screen does not appear when generating a WS proxy

I'm using JDev 11.1.1.2. When I tried to generate a Web Service proxy, this screen does NOT appear most of the time. I only saw it appear one time. Do you know why?
It's step 2 of the wizard.
Client Style
+ JAX-RPC Web Logic Style
+ JAX-WS Style

Whenever one tries to generate web service proxies for the first time, JDeveloper allows the user to choose the client style (JAX-RPC Web Logic Style OR JAX-WS Style).
Once the option is selected, JDeveloper automatically adds the dependent jars in the classpath. When one tries to generate the proxies a second time,
JDeveloper does not provide an option to select the client type. It defaults to the one which was selected for the first time.
I was able to overcome the problem using the following approach.
1. For JAX-RPC client style:
Right Click the Model (or ViewController) project -> Project Properties -> Libraries and Classpath ->
Add Library -> select JAX-RPC Web Logic Client, JAX-RPC 11 Web Services
Remove JAX-WS Web Services library (if present)
2. For JAX-WS client style:
Right Click the Model (or ViewController) project -> Project Properties -> Libraries and Classpath ->
Add Library -> JAX-WS Web Services
Remove JAX-RPC related libraries (if present)
I am using Jdeveloper Version 11.1.1.4.0
- Pranab Garad

Cannot delete email. Selected edit. Selected email and red circle with white check appears. BUT, options at bottom of screen do not appear. Help.

Cannot delete email. Selected edit. Selected email and red circle with white check apprears. BUT, options at borrom of screen DO NOT APPEAR. I just get a grey band across he bottom of the screen.

Correction: the "Move" button is blue, not green.

TS2972 My itunes library on my home screen does not appear on another home screen on the same computer when itunes is opened on the other screen/user. Home Sharing is turned ON. How do I fix this problem?

My itunes library on my home screen does not appear on another home screen on the same computer when itunes is opened on the other screen/user. Home Sharing is turned ON. How do I fix this problem?

You'll have to contact the developer about this. Apple doesn't make this app;

Source Safe causing LabVIEW Quick Start Screen to not appear after closing open vi windows?

Similar Messages

Maybe you are looking for