Source sysem deletion

Some how R3 source system got deleted in SCM5.0. Is there any table, i can check, which userID deleted this source system.
thx
Jeff

Sam,
Thx for reply, can u elaborate little bit more. I could not able to figure it out in the table. Pls guide my how to check in this particular table.
thx
Jeff

Similar Messages

Field not delivered by source system - Deleted from rule

Dear Support,
While activating business content for example 0CRM_COMP,
I get the following error:
Field TYPE not delivered by source system -> Deleted from rule
Field CAMP_TYPE not delivered by source system -> Deleted from rule
Field CAMP_TYPETX not delivered by source system -> Deleted from rule
Similar errors for different fields appear.
My system config is
BI 7.0, SP14
BI Cont 703 Sp6
Any fix or solution will be suitable awarded.
Thanks and Regards
Raj Jain

HI Raj,
The business Content is not always consistent.
If you get messages like that, the best way to deal with them is to manually adjust the objects.
In this case it means that you will have to check the datasource. It may be that in R/3 you will have to "unhide" or add some fields to the datasource. (I cannot be sure as I cannot go into details).
Hope this helps,
Udo

My macintosh HD it is almost filled with "other" space and can't find the source to delete, what can I do?

My MacBook Air is almost filled up with "other"space and I can't find the source. What can I do to fix this and or what apps can I download to find the source and delete it. Thanks.

If you haven't restarted your computer for a while, do so. Sometimes cache files get mangled and begin expanding rapidly. A few weeks ago my iMac went from more than 500GB free to less than 20GB free in a short period of time. I knew that wasn't possible but also knew that I'd not shutdown or rebooted in over a month. After the reboot the disk was back to its normal usage and I've not seen a repeat.
If that doesn't do it, check out macupdate.com for programs such as DaisyDisk and Omni DiskSweeper to examine your drive contents. Media files (movies, digital photos, and songs) are the mostly likely culprits for taking up space.

I clicked on page source and deleted nodes with the web developer and the deletion has become permanent. Ebay won't load pictures. How to fix?

The problem is on my desktop and my laptop. I got a bit click happy on my desktop computer and hit the Web Developer button. I was trying to delete a really annoying flash ad on the side of the screen. I think I got into page source and deleted the node. I'm truly not sure what happened, but pictures stopped loading for ebay and everything is a worded list down the side of the page. I have deleted cache and cookies. I have reset mozilla. I have uninstalled and reinstalled mozilla. Laptop was not immediately affected, but now having the same problem.

This is a very strange issue.<br>
No changes made with the web developer tool will save and should be cleared when the page is reloaded.
Try disabling graphics hardware acceleration. Since this feature was added to Firefox, it has gradually improved, but there still are a few glitches.
You might need to restart Firefox in order for this to take effect, so save all work first (e.g., mail you are composing, online documents you're editing, etc.).
Then perform these steps:
*Click the orange Firefox button at the top left, then select the "Options" button, or, if there is no Firefox button at the top, go to Tools > Options.
*In the Firefox options window click the ''Advanced'' tab, then select "General".
*In the settings list, you should find the ''Use hardware acceleration when available'' checkbox. Uncheck this checkbox.
*Now, restart Firefox and see if the problems persist.
Additionally, please check for updates for your graphics driver by following the steps mentioned in the following Knowledge base articles:
* [[Troubleshoot extensions, themes and hardware acceleration issues to solve common Firefox problems]]
* [[Upgrade your graphics drivers to use hardware acceleration and WebGL]]
Did this fix your problems? Please report back soon.

Enhancing the standard Data source without deleting setup tables

Hi all,
I am in the the Support Project. My requirement is I want to Enhance u201C2LIS_13_VDITMu201D LO- data source with two fields without disturbing the delta.
Please suggest me how I have to do this.
As Per my Knowledge ,
1. we have to delete setup tables
2. Enhance the data source & re populate the setup tables.
3. Delete the data in the cube & add the two new fields in the cube & repopulate the cube with new Initial .
4. after that delta will be enabled through job control.
But this process is not suitable for our requirement because delta was enabled long back it is going very smooth till date, I donu2019t want to disturb that process.
So please suggest me is there any other procedure to do this.
Thanks,
Kiran Manyam

Hi,
If historical data (loaded earlier in to BW) are not required for the two enhance field, then it is not required to deleted the setup table and reload them to BI.
In this case simply you can follow the following procedure.
1. Enhance the fields, and update the transfor structure(to unhide these fields). In BI update the required data target with respective IO. and in exit populate the enhance fields. No need to disturb the delta
2. Replicated the DS in BI and do the mappings in tranformation.
Here the existing delta is working, and you will be populating the two fields in the exit only.
Thanks,
Jugal.

How to delete a row in target when corresponding row in source is deleted

Greetings
Environment:
Repository - OWB 10.1.0.4 - going to 10gR2 very soon
- IBM RS6000 running AIX 5.3
I have a target table being updated with an INSERT/UPDATE. The user deleted a row in the source table and I want to delete the corresponding row in the target table.
How do I do this in the map?
Many thanks.
-gary

Thanks very much for the responses. Now that I have thought it through more carefully I see I can still have a single instance of the source table and send it through the MINUS operator with the target table followed by a DELETE into the target table and still have the existing logic for the INSERT/UPDATE into a second occurrence of the target table.
It won't matter what order OWB puts together the two operations on the target table:
- if it does the DELETE first the new rows that haven't been added to the target table will come out of the MINUS operator but not be found yet in the target table so not deleted.
- if it does the INSERT/UPDATE first the newly added rows will not come out of the MINUS operator and hence not deleted from the target.
Must have been a brain fart.
Thanks again.
-gary

Limit order items to be sent back to sourcing on deletion

Hi all,
We are on SRM 7.1 Extended classic.
Can anyone confirm if the limitatin on the LIMIT orders not being sent back to SOURCING even after the PO items are deleted is stilll valid in SRM 7.1.???
Also we want to use LIMIT orders instead of service orders in SRM 7 as there are seevral issues when users try creating carts with the SERVICE HIERARCHY.To avoid the manual errors,we would like to use limit orders in SRM and then if required when the PO items are deletd in SRM the items should be sent back to sourcing.
If the limitation for the LIMIT orders items still hold true for SRM 7,then is there a way or enhancement to enable the sending of limit orders back to sourcing once the items are deleted in the PO in SRM?
I know the report responsible for snding items back to sourcing is BBP_GET_STATUS_2 and CLEAN_REQREQ_UP but is there a way we can handle the sendng of the PO items back to sourcing base don some custom logic for limit orders or for that matter any type of PO created in SRM?
Pls advise.

The note 1247922 is for EXTERNAL requirements/Purchase requsitions in ECC backend system and is not what I'm looking for.
Neverthless,I will create an OSS message with SAP and check if tehre is any enhancmenet available for sending limit items back to sourcing on PO deletion.Will update the thread accordingly
Thanks for the help.

Recover from source system deletion

Hi experts,
Our source system assignment to ECC was accidentally deleted which subsequently deleted the transfer stuctures/rules. Apart from restoring from backup, how can we recover the transfer rules? We could manually assign the source system again but there too many to be performed as well as we could not possibly recall all the routines, formulas and infoobject mapping.
Assistance is greatly appreciated.
Thanks!
ismail

Hi Arun,
Re-transport from QA is one of the options and our Basis is recommending that as well. Our options in order of preference is as follows:
1) Restore from backup
2) Re-transport from QA
3) Manually re-create
Thanks for your thoughts.
ismail

Source System Deleted

I am running 2004s SP 10 and have recently delete a source system that no longer connects to an r/3 client.
The problem is that I cannot access transport connection and BI Content tabs in RSA1 because I get an error telling me that my deleted source system cannot be found. I have also noticed there are still some transformations and datasources that still exist and cannot be deleted.
Can someone tell me how to delete these objects or suggest how I can solve this problem.
Thanks

Hi
here is function module by executing this u can dissconnect the source sytem
RSAP_BIW_DISCONNECT
and also using this u can reconnect also
RSAP_BIW_CONNECT
Hope this will help u
Regards,
M Kalpana

Source System Deletion Process in BW

I deleted the Sourse system (NQ2) in BW sandbox server (BSN) using RSA1 with right click option. During this deletion process, it deleted all the dependent objects. Now i connected BSN system to another Source System (NSB) and replicate and activate the datasource successfully.
Now when i checked the infosources in RSA1, say 2LIS_13_VDITM, no datasouce is assigned to this infosource. I can manullay assign the datasource.
is it the right approach to delete the source system and connect to another source system? Do i have to manually assign the source system to all inforsources?
Regards
Amarjit

Hi,
it wasn't necessary to delete your old source system. By doing so you have deleted all independant objects: transfer structures, transfer rules and most important, your PSA data which could be used for testing.
You could have kept your old source system to use it a template.
For instance it would have been possible to recreate all your TRules like for like from your old source system with a special transport by collecting all source system dependent Objects with a "save for system copy".
You would have saved a lot of work!
hope this helps...
Olivier.

Source system deletion before copy or refresh of Non productive system

Hi
regarding the refresh of non prod BI system. . As part of refresh, we were asked to follow note 886102.
In this Scenario B3 matches to us. While doing the scond step. I have to delete source systems from RSA1 except my self system.
It is taking long time to delete source systems as each object of source system is prompting for request and consuming long time to complete thsi activity.
Please help me with a smarter method to delete the sourcesystems.
Thanks,
Haaris
Edited by: Hari Prasad Bolla on Jul 14, 2010 8:50 PM

Hi:
The primary source of information is the how to paper on this topic:
https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/docs/library/uuid/bff13df2-0c01-0010-6ba7-bc50346a6fd8
YOu are correct, you can refreh the BI system without deleting the source system.
Thanks for any points you assign (after all, I wrote the paper!).
Best Regards -
Ron Silberstein
SAP

Source system deletion

Hi ,
We have two R/3 systems as Source systems for our BW.
Right now,both are in a postion to give data for lot of Data targets.
And now, we are planing to drop one source system.
So, kindly give me an idea about the steps to be followed
to make sure that there will be no problems after dropping
(like Metadata inconsistency...etc) .
Kindly provide few notes on this issuse also.
With rgds,
Anil Kumar Sharma .P

Hi Anil!
i think first you got to remove all the source system assignments for all the InfoSources with this particular source system by deleting transfer rules. one more thing is about logical system dependency of your data, i mean if there is any data which has 0logsys compounded and the data is loaded from this source system. then determine what you are going to do with this data and how you are going to refer it in future.
and once you are sure there is no link between this source system and BW. you can then delete this source system by justselecting delete in the context menu of this source system.

ConfigMgr 2012 Update Source content deleted

Greetings,
I am experiencing a problem that is appears to be the same as the old thread here:
http://social.technet.microsoft.com/Forums/en-US/bee18ffb-f779-4aa4-900d-046e7711424c/sccm-2012-source-content-gets-deleted?forum=configmanagergeneral
Rather than revive an old post, I thought it best to start my own.
We have a rather large environment (CAS +5 Primaries + Many DP's) and we are currently adding several new remote DP's each week. Each time a new DP is added it is placed in a Distribution Group and the "core" package content is sent
to it.
I have a problem where my Windows Update Packages keep failing due to content disappearing from the source folder location. This started some time ago, and is now becoming a regular event to correct. Not every day, but once a week or so.
The Update group has the updates all showing as "downloaded"
I have a report query that matches the updates to the "GUID" subfolder so I know all the content is there
I distribute the content from the CAS. Distrmgr.log shows all is good. Packagemgr.log on the Primaries show all is good
Client have been installing the updates as expected so the deployment does work
Days/weeks later, ALL the DP's will show as "failed" for that update package. Checking the distmgr.log shows that it is failing to distribute due to a missing source folder. I use my query to work out which update that subfolder GUID belongs to,
but it is already flagged as downloaded, and when trying to download it again CM just "skips" it thinking it already has the content in that package.
The "fix" is to download the same update to a new package instead. CM then does a proper check, realises it doesn't have the content and will download the update to the new package source location. I can then copy the missing GUID subfolder
from the new package into the original package and try the distribution again.
The problem now is that there are usually many folders missing, so distmgr.log will fail again on the next missing folder. Because it stops at the first error, repeating the above process is incredibly tedious when there are a lot of missing folders.
My current "solution" is to select ALL the updates that should be in the current package and download them all to a "Temp package" that isn't deployed or distributed anywhere. Then in future when the main deployment package fails, I just
"select all, copy" the contents of the temp folder into the original folder (skip duplicates) and it puts back all the missing content and distribution will work again.
We are not using ADR's for this content, although I do have an ADR for the Endpoint updates which go into a completely different distribution package.
*Something* is cleaning up or purging these folders from the source location, but I have no idea what process or mechanism this might be.
Any thoughts or suggestions most welcome.
Scott.

I've found the cause, blog post write here:
http://kickthatcomputer.wordpress.com/2014/10/11/configuration-manager-update-source-content-being-deleted/
Microsoft was working with me trying to identify what was deleting the folders, however nothing was appearing as the cause.
I just realised this morning that I had used the built-in CM12 Migration function some time back to migrate update packages and groups over to our second hierarchy but hadn't updated any of the migrated content since then. The migrated packages on the second
hierarchy still point to the same source location and so whenever my original hierarchy added content to the update packages, the second hierarchy would delete it because it though it was "orphaned" content.
This is something people will have to watch out for when using the migration wizard as the same type of issues will impact things like WIM boot image packages as well where the source content can be manipulated directly by the CM12 system on one hierarchy
without the other one being aware of that change.
At the moment the options are to either
Make sure you run a "migrate changes" job whenever you make changes to updates on your source hierarchy to keep them in sync
Manually make a copy of the source content to a different folder or location, then update the package source location on the migrated packages to point to that new content (undesirable for massively large content)
Create a scripted method to schedule regular migration jobs between the hierarchies (looking into this option now)

BUG: Import Java Sources, can delete file contents.

When I was recreating my project files because I had a problem with migrating from Preview 2. I went to import all my source into the new project... via File > Import > Java Sources... This is when I realized I setup the path wrong for the project I had c:\projects\application\projectname\projectname\src for the source where it was suppose to be c:\projects\application\projectname\src.
Anyway instead of recreating again I just changed the Copy to 'c:\projects\application\projectname\src' and I set the copy from to the same exact directory 'c:\projects\application\projectname\projectname\src', then clicked ok to import.
Well 10minutes later after adding the rest of the stuff I need and fixing the directory paths I realized all the source files were there but the contents were deleted!
Wasn't a big deal for me because I backup my files and I just right clicked on the source folder in vista and restored the previous versions (what a handy feature)... But I don't remember getting a warning and why would it delete the contents anyways? Shouldn't it do a check to see if its copying the file onto it self before copying and just skip the copy part and import.
Stupid me for messing up the path but for someone who doesn't backup their files this would really suck bad.
Thanks,
Art

When I was recreating my project files because I had a problem with migrating from Preview 2. I went to import all my source into the new project... via File > Import > Java Sources... This is when I realized I setup the path wrong for the project I had c:\projects\application\projectname\projectname\src for the source where it was suppose to be c:\projects\application\projectname\src.
Anyway instead of recreating again I just changed the Copy to 'c:\projects\application\projectname\src' and I set the copy from to the same exact directory 'c:\projects\application\projectname\projectname\src', then clicked ok to import.
Well 10minutes later after adding the rest of the stuff I need and fixing the directory paths I realized all the source files were there but the contents were deleted!
Wasn't a big deal for me because I backup my files and I just right clicked on the source folder in vista and restored the previous versions (what a handy feature)... But I don't remember getting a warning and why would it delete the contents anyways? Shouldn't it do a check to see if its copying the file onto it self before copying and just skip the copy part and import.
Stupid me for messing up the path but for someone who doesn't backup their files this would really suck bad.
Thanks,
Art

Delta enable custom func mod data source for Delete record also

Hi,
We have a custom function module data source and the base table on which data is extracted has two time stamp fields ( created on, changed on ) and the data source is delta enabled with the timestamp field.
It works aboslutely fine in Full and initial mode and load data into a target ODS.
Even in delta mode we believe that it works in most of the cases( only change of an existing records and creation of new records). However in the case of delete, we have issues. When the data is deleted from the base table we completely loose the record and cant advice the BW which one to delete.
In order to bypass this we have analyzed the cdhdr/cdpos table and found out that that we can compute the Key field value that was deleted from the last delta run and can include it as such in the data that are extracted.
Big Question is by what mechanism we let the BW know that this is a delete, so that the existing record( with the same key) is actually deleted from the ODS. I have seen some fields like 0RECORDMODE doing things in SAP delivered content. But not sure how we can get this work for our custom data source.
Please let us know whether you need any clarification on this. I shall be prompt to provide points who can resolved this showstopper issue for us.
Thanks

Hi Aruna,
I have tried to explain : "Big Question is by what mechanism we let the BW know that this is a delete"
Now to create a DataSource, you will have to include the information from the Tables as you mentioned:
1: CDHDR
2: CDPOS
In this table you can check the CHANG_ID as the field which gives the information of
1: Overwrite
2: Add
3: Delete
Now when you create the Function Module, make a field similar to this and read the R/3 Table field CHANGE_IND and pass the relevant Indicators to the BW in the Transfer Rules
Like
CDHDR refers 'D' for delete but In BW 'R' denotes Deleted image. So the FM should take care this and pass the blank for all and 'R' for the documents with 'D' for each line item along with the other required fields.You will have to use an ODS in this case.
note: Plz check the logic of Change Ind "E". I am not sure of this type.if you want to delete 'E' then pass the value as 'R' to the BW system for documents with 'E' CHANGE_IND.
Hopes i made it clear.
regards
Happy Tony
Points == Thanks

Source sysem deletion

Similar Messages

Maybe you are looking for