Source system Activation in BI

Hello All
I'm trying to activate Source System (RSA1) in BI System, I'm keep getting following ERROR.
BI unknown in source system
BI IDoc type ZWAA003 is not the same as source system IDoc type
The following errors occurred in the source system:
Incorrect IDoc type ZWAS002 in the ALE definition of the source system
Result of the destination check: Password logon no longer possible - too many faile d attempts
when I tried to re-set the password for background user (AEREMOTE), but I'm still getting the SAME error.
Thanks for your immediate help
BI

Hello,
First try to restore ur source system from the right click option. If it fails....
Check in WE20 of the source system whether proper idoc type are specified for the BI system.
You can compare with any other working source system for the idocs name.
Regards,
Shashank
Edited by: Shashank Dighe on Aug 13, 2009 9:13 PM

Similar Messages

Error in Source System Activation

Hi
When i am activating/restoring CRM Source System, i am getting following <b>Error</b>:
The following errors occurred in the source system:     RSAR     374
Result of the destination check: Timeout     RSAR     375
There is also a <b>short dump</b>:
Runtime Error          CALL_FUNCTION_REMOTE_ERROR
Date and Time          27.09.2007 16:45:22
ShrtText
     "Password logon no longer possible - too many failed attempts"
What happened?
     Error in ABAP application program.
The current ABAP program "SAPLRSAC" had to be terminated because one of the
     statements could not be executed.
This is probably due to an error in the ABAP program.
The error occurred in an RFC call to another system.
     The target system has also written a short dump.
     Consult this short dump for more precise information about
     the cause of the error.
What could be the problem?
Your suggestions are welcome....
Regards
Prasad

Hi Srikanth,
Thanks for the quick reply.
RFC Connection Test is OK through SM59 in both the systems.
Short Sump Analysis :
Error analysis
    An error occurred when executing a REMOTE FUNCTION CALL.
    It was logged under the name " "
    on the called page.
Regds
Prasad

Source System Activation - IDOC Type does not exist

I'm doing a new installation of BI7 and when I want to activate the source system on replicate Metadata Box and select "Only Activate" it comes up with error stating :Basic Type ZSxxxxx does not exist
When I look in SE16 on table RSBASIDOC I can see the IDOC Type exist on both BW and R/3 Systems
Any solution?

Check my reply
Re: "Basic Type Does Not Exist"

Source System Activation Error

Hi,
We Upgraded BW3.1 to BI7.0, we did successfully on Development. but when in QA when I was trying to activate RFC by going to RSA1 and right click and activate it is showing errors like
Source system XXX300 is inactive     RSAR     5
BI unknown in source system     RSAR     8
BI IDoc type ZSBB025 is not the same as source system IDoc type     RSAR     371
The following errors occurred in the source system:     RSAR     374
EDI: Partner profile not available     E0     332
Entry in inbound table not found     E0     414
Entry in outbound table not found     E0     400
Entry in outbound table not found     E0     400
Am I missing anything ?
Thanks,
Chander

Hi
As a part of sanity check did you perform rituals as below -
Below deletes the BW-specific information in the source system that does not have a connection to the BW System.
1. Log on to the source system in question
2. Call Transaction SE37
3. Enter function module name 'RSAP_BIW_DISCONNECT'
4. Select the 'Sngl. test' function.
5. Enter the name of the BIW system for the import parameter 'I_BIW_LOGSYS' that matches the one prior to the new installation
6. Enter the name of the source system for the import parameter 'I_OLTP_LOGSYS'
7. Choose the function 'Execute'
and then
Transaction SE37 - function module RSAP_BIW_CONNECT - Single Test. Parameter:
                        I_LANGU        <language of the destination to BW>
                        I_SLOGSYS      <OLTP Source system (SLOGSYS from RSBASIDOC in BW)>
                        I_LOGSYS       <BW system (RLOGSYS from RSBASIDOC in BW)>
                        I_STEXT        <name of the OLTP system>
                        I_BASIC_IDOC   <BIDOCTYP from RSBASIDOC in BW>
                        I_SAPRL        <SAPREL from RSBASIDOC in BW>
                        I_RESTORE
                        I_TSPREFIX     <TSPREFIX from RSBASIDOC in BW>
                        I_PREFIXE <35 times second byte of TSPREFIX from RSBASIDOC in BW
                                       (Example TSPREFIX = 'BA', then
                                         I_PREFIXE = 'AAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAA')>
Hope it Helps
Chetan
@CP..

Activating Source System

Hi All,
I was activating the source system from the IDES database.
In the source system screen when I see the u201CObject Informationu201D for this source system it displays u201CSource is Inactiveu201D, I tried activating the source system by doing a right click and activate source system, it says the following error
u201CCould not activate source system T90CLNT090u201D
u201CMessage no. RSAOLTP553u201D
Please help.
Thanks
Senthil

WIth your help i got the source system active. When i try to replicate the datasource i got the following error.
"The current program had to be terminated because of an error when installing the R/3 system.
The program had already requested 800385488 bytes from the operating system with u2018mallocu2019 when the operating system reported after a further memory request that there was no more memory space available"
I understand that iam running out of space. But can i replicate only one module which is "SD". If so how?
please help.
thanks
senthil

How to change the Source system from ONE DataSource?

Hi,
I'm trying to change a DataSource's source system (active with dtp and transfer rules), but it's not possible to do it in change mode because the field 'Source Sytem' is not enabled. I know I can use the BDLS transaction but I understand that this is for change all Datasources and I only want to change one of all.
Thanks for your help

Hi Marcel,
As I understand apart from file and web services all other data sources are replicated from underlying source system. BDLS transaction is used to change the source system but in case of system copy activity and it is necessary because the data sources points to old source system.
In your case as I understand you will have to replicate the current data source directly from underlying source system and then build the rest of the flow. May I know how you have got this single data source for which the source system is different?
Regards,
Durgesh.

Source system jobs in ready status

Hi Gurus,
I am Extracting data from R/3 to BW, when i execute the infopackage the jobs in source system are in ready status and they are not moving to active & finished status.
Is there any method to make the jobs in source system active manually.
Thanks & Regards,
chinnu.

When you execute the infocpackage you must use the inmediatly option for execution or programmed job ...in your case is assume that you use the orogrammed job....if you use this last option...you must setup your job with init time...if you do not use the start time and hour the job will never starts....this could be your problem

Source system activate error

Hi,
I have created new source system for R/3 quality , when i am activating then getting following error. Kindly suggest how to resolve this error. Thanks in advance.
BI unknown in source system RSAR 8
BI IDoc type ZSDB018 is not the same as source system IDoc type RSAR 371
EDI: Partner profile not available
Entry in inbound table not found
Entry in outbound table not found
Rgrds
Rakesh

Hi,
Check the source system RFC connection in SM59, if this is ok then check the tcode WE20 for EDI partner profiles and inbound and out bound Idocs defined.
In BW Out boud IDOC type should be same in ECC in bound Idoc type, and in ECC out Bound IDOC type should be same in BW in bound IDOC type then the source system activation is possible in RSA1.

Error while activating source system

Dear friends,
I am getting Error ' Basic type does not exit' while activating source system in RSA1.
please give the solution .
Regards,
D.prabhu

Hello,
this is due to incomplete partner profiles;
When createing your source system you have to ensure that your source system is open for modifications (transaction SCC4) and that you have administrative rights in this system. Indeed the creation of a source system will create all partners profiles in both systems thus the source system needs to be open for modification.
ensure this and "restore" your source system from RSA1
hope this helps...
Olivier.

Problem Activating Source system RSAR 374, RSAR 375

Hi all,
Hoping you can help me with this issue. I have two
systems,one R/3 4.7 system and another BW 3.0B system.Both are recently installed. created user in client 800 on R/3. created user in client 100 on BW. i established RFC destination between both, Logical source system assignments and definitions of logical source systems on both. They are working correctly, But i couldnot succeed in creation of the source system. it gets created but it is not activated and ends with the following errors.
Message and the id next to it
1) The following errors occured in the source system. RSAR 374.
2) Result of the destination check: timeout . RSAR 375 .
when i try to activate it by right clicking on it , it does give these errors and activation gets terminated.
Can anyone pleaseeeeeeeeeeee with this. Thanks a lottttttt........
kishore karnati

Hi Kishore and Edwin,
I have exactly the same problem described here, except I am creating an ECC 6 source system in BI 7.
Therefore, I am wondering if you guys can elaborate on your experience.
I get the same error message RSAR 374 and RSAR 375.
I did both connection and authorization tests for the RFC in SM59 and it's OK.
What do you mean by the "basic concept of BWREMOTE AND ALEREMOTE background users."???
Please advise.
Cheers,
SJ

Error when activating Datasource in Source System

Dear All,
I am gettting this error when activating data source in source system(RSA5).
1)DataSource 0NETWORK_CUST_ATTR; switch to package PS_IS_EHP3_SFWS_SC is off.
2) The extract structure DTTV_REC_53 of the DataSource 0TV_REC_531 is invalid
Message no. R8444
Diagnosis
An invalid extract structure has been assigned to the DataSource. An extract structure has to be active in the DDIC. It cannot be a view, since the customer is not able to add append fields for filling in the customer exits to a view.

Hi
To use this datasource, you need to install EHP3 package.
http://help.sap.com/saphelp_nw70/helpdata/EN/b0/7b6c759c494ffcbf821d2442687888/frameset.htm
Chandu.

Activation of Business Content Datasources in CRM Source system

Hi,
      My Requirement is to activate all Datasources in CRM Develoment server.I have select the entire node in RSA5 and click "Activate Datasources".But for each Datasources system is askin for develoment request.Is there any procedure to activate all Datasources with single Development Request.
Regards
Vishal

This section describes the general settings necessary for BW Integration in CRM.
If CRM is not involved in your scenario skip this section.
Transferring Application Component Hierarchy (CRM)
Procedure
This step has to be carried out in the CRM system.
IMG Menu     Integration with Other mySAP Components  Data Transfer to the SAP Business Information Warehouse  Business Content DataSources  Transfer Application Component Hierarchy
Transaction code     RSA9
Confirm the security check: Do you want the content application Transfer Component Hierarchy? with YES.
If a dialog box appears requesting the user to enter a development class, enter a development class in the customers namespace and choose Save or choose Local object.
If no error message is sent the application component hierarchy has been transferred successfully.
Cross Connectivity:
It describes all settings that are necessary to connect the components of the SAP.system landscape with each other. The settings for each combination of two components to be connected are described in a separate structure node. The separate section headings make it possible to identify the activities required to connect certain components with each other. The section headings for components that are not part of the installation can be skipped
Connecting SAP BI with SAP ERP, SAP CRM
Procedure
To carry out the activity, choose one of the following navigation options in the SAP BI system:
Transaction Code     RSA1
SAP BI Menu     Modeling  Data Warehousing Workbench: Modeling
1.     Choose Modeling.
2.     Choose Source Systems.
3.     Select SAP in the window on the right.
4.     Choose the Context menu (right mouse click).
5.     Choose Create.
6.     Make the following entries:
Field     Entry
Target computer (server)                            Server of the SAP ERP, SAP CRM or SAP SRM system
System ID     System ID of the SAP ERP, SAP CRM or SAP SRM system
System number     System number of the SAP ERP, SAP CRM or SAP SRM system
Background user in source system     RFCUSER
Password for source system     welcome
Background user in BI     RFCUSER (can not be changed in this activity)
Password for BI user     welcome
9.     On the dialog box Please log on as an administrator in the following screen choose Continue.
10.     Log on to the Source System with your administrator user. Choose the correct client.
11.     On the dialog box New Source System Connection choose Continue.
12.     On the Replicate Metadata dialog box, choose Only Activate.
The building block CRM Lead Analysis describes the all the required activities to analyze the Marketing Lead Analysis data from SAP CRM in SAP Business Information Warehouse.
The analysis is carried out with the following queries of the InfoCube 0MKTG_C01 CRM - Lead Management (SAP BW Business Content).
The Lead Management InfoCube contains all the characteristics and data used for the administration of leads. This InfoCube enables you to execute the following standard queries available in SAP BW:
1.     Channel Analysis: This query is used to determine the best channels by which business partners are contacted in the context of a marketing campaign. Following each marketing campaign, the lead manager can compare the success of a given channel to those of others.
2.     Efficiency Reporting: This query is used to analyze the efficiency with which leads are qualified. By navigating to the sales organizations and the responsible employees for the leads, it is possible to assess how efficiently lead teams are working and to identify areas for improvement.
3.     Historical Evaluation: Use to help analyze and compare leads over different intervals (comparison of different quarters or years for example) to see if general characteristics in the processing of leads can be identified for these periods.
4.     Lost Leads: Provides an overview of the number of lost leads in a particular period and the reasons (implemented as a navigation characteristic) for the loss of the leads. This query is used to analyze the main reasons why leads might be lost, with a view to developing new strategies for overcoming these weaknesses.
5.     Channel Mgmt.: Top-n Lost Leads (Current Year): In a Channel Manager Portal, this query provides an analysis of the leads lost by a Channel Manager over the past 12 months. Channel Managers can also view the leads lost by their Channel Partners. In a Partner Portal, this query shows the top-n unsuccessful leads distributed by a Channel Manager to a Channel Partner. Partner Manager can see the lost leads of the Partner Employees over the year. Partner Employee can view his lost leads over the year.........
Before starting activities in this building block, you need to perform or check the following steps:
1.     From the BW Connectivity building block the following activities have to be completed:
a.     Local Settings è SAP CRM: all activities have to be completed.
b.     Local Settings è SAP BW: all activities have to be completed.
c.     Cross Connectivity è Connecting SAP BW with SAP R/3, SAP CRM, SAP SRM: Connect your CRM System.
2.     From the General Settings for BW Integration building block the following activities have to be completed:
a.     In section General Settings in CRM all activities have to be completed.
b.     In section General Settings in SAP BW all activities have to be completed.
Hope it will helps you........

Activation in Business Content but Not Assign Source System

Hi guys i am using BI 7.0 and i have to activate some infocubes in BC but when i activate them i have no choice for activate the source system asignation and the infopackages too....then i have to activate the standard objects and then manually create the transfer rules and the infopackages....
I have set up the systems which i want to connect in BC screen and i have activated and repeated my datasources.....
I hope somebody could help me with this

Hi Oscar,
Before you transfer your cubes to the right hand side, make sure you have selected the right source system ok. Once you transfer the cube to the RHS, make sure in grouping you select 'In dataflow before'
Once you have done this, IF there is a standard Datasource associated with the BC infocube it will then show up in the hierarchy.
Considering it is there, please activate this Datasource in your source system replicate your source system in BI. Now activate your other objects
Regards,
Pramod

Error activating source system

hi all
in bi7.0 i have source system which is connected to r/3 4.7
while activating its showing error "Result of the destination check: Name or password is incorrect (repeat logon)"
I have given the right password for biwuser in BI and aleremote in r/3 side
when i am trying to restore after giving all password in the restore option of the source system its showing message "rfc user logon failed check connection"
what may be the reason as i have crosschecked all the password is right.

Hi,
I have faced similar issue. It is due to the version of R/3. R/3 4.7 stores the password in uppercase. When you activate source system, it supplies upper case password to biwuser in BI.
Change the biwuser password to uppercase and try restoring the source system with uppercase password.
Hope it helps,
regards,
Pruthvi R

Source system is not active?

Hi,
I have Data source created in CRM and I have created a Info source and Source system is connected with the data source I am getting a message "Source is not active".
Can any please help me to understand about this?
Points will be definitely assigned.

Hi Vasu,
In RSA1 check for your CRM source system and do a check on the source system whether it connected with BW system or not.
RSA1-->Source Systems and right click on CRM Source System name and check. This check shoul be active, if not contact concerned person.
Regards,
Saravanan

Source system Activation in BI

Similar Messages

Maybe you are looking for