Source System Already Exists

Dear Team,
After the system copy from PRD to DEV, all the existing source system(s) from our ealier R/3 quality
got vanished, according to BASIS team, the source sys assignments have been deleted during the databse restore, Now, the problem is, when am trying to create the source system(s) again, the system is throwing the Msg. 'Source system already exists' and not allowing to create newly.
I would request you guys to share your ideas/solution to fix this issue.
Thanks in Advance.
Regards.

Hi,
Yes that is correct, but Basis team need to set the parterner profile and Idoc connections between the Source and BW system, it is common error, whenver you copy the source client.
check 886102 note.
Note: No need to create source system, just need to adjust the settings in WE20.
Thanks
Reddy

Similar Messages

  • Error: Source system already exists. Message no. RSAR201. Points rewarded.

    Error: Source system already exists. Message no. RSAR201
    We have installed a BI 7.0 system recently and I am setting up the server to connect to SAP ERP.
    In TA SM59 a connection to the SAP ERP has been established. The “Remote Logon” is OK, (meaning clicking it nothing happens). The “Connection Test” is OK.
    According to the Best Practices paper: “B84: BI Connectivity” (B84)
    http://help.sap.com/bp_biv170/BBLibrary/documentation/B84_BB_ConfigGuide_EN_DE.doc
    I have done the following:
    In TA RSA1
    1.     Choose Modeling.
    2.     Choose Source Systems.
    3.     Select SAP in the window on the right.
    4.     Choose the Context menu (right mouse click).
    5.     Choose Create.
    6.     Make the following entries:
    Available destination: (The above tested connection)
    Background user in source system: RFCUSER (I created the user in ERP according to step 1.4 in “B84”)
    Password for source system: *****
    Background user in BI: RFCUSER (I created the user in BI according to step 1.4 in “B84”)
    Password for BI user: *****
    8.     In the dialog box Please log on as an administrator in the following screen choose Continue.
    9.     Log on to the Source System with your administrator user. Choose the correct client.
    10.     On the dialog box New Source System Connection choose Continue.
    THEN I GET THE ERROR:
    Source system already exists.
    Message no. RSAR201
    What is wrong? I cannot locate any SAP notes to help on this problem.
    Best regards,
    Carsten Pold

    Hello Carsten,
    just some guessing at this point...
    a)
    Is the connection really new? For example, was there another system connected to that ERP, maybe with the same logical name? Or was any of the two systems copied from another system?
    b)
    Authorisations issues in this process may result in strange error messages. Make sure that the admin user in step 9 really has SAP_ALL. There are a lot of complex activities that this user must be able to do (ALE management, RFC access etc.). To exclude issues with the RFCUSER users: If possible, give them SAP_ALL, too. Of course only temporarily for testing.
    c)
    I normally don't use existing RFC destinations. Usually, I let the system create those, too. So maybe it makes a difference if you remove the RFC destinations on both sides and try again. In that case, you will of course have to provide the RFC details when creating the source system connection...
    I hope this brings you forward a little...
    Regards,
    Christian!

  • Error creation of JCO connection: System Already Exist

    Hi Experts,
    We have created the SLD connection to the ECC6.0 from the Portal 7.0.
    Created one JCO connection using that SLD successfully for the Clinet 100.
    Now we required to create one more JCO Connection for client200 also. But it is giving the Error that
    System Already Exist.
    How can we resolve this. When we create the JCO connection for one client, con't we create one more JCO connection for the same system for the differt client or not?
    If so How do it?
    Regards

    I think you can add one more client in the existing connection. well, I am not sure about that even.
    nikhil

  • RSDS  transport - source system not exist

    Hello Guys
    i have a problem during transport of DataSource from DEV to QUA.
    The error is:
    Start of the after-import method RS_RSDS_AFTER_IMPORT for object type(s) RSDS (Activation Mode)
    Source system D18CLNT228 does not exist
    I have check already the transport table RSLOGSYSMAP and insert item to map the DEV system with QUA system (this done in both system,develop and quality). I check also the source system ID and everything seems update correctly (in both system develp and quality).
    Anyway during the transport i have this error and when check in QUA system i have the DataSource, seems map correctly with the right source system but is not active...
    do you have any suggestion
    please let me know
    regards
    B.

    Hi
    check in your QUA system if corresponding source system is linked to it. Also currpospong trasports in source systems are moved properly.
    Regards
    Sudeep

  • Logical system already exists in communication component | Sys_R

    Hi
    What should be done if there are 2 diff systems with the same logical system name. Since the technical systems are different, i am able to create different business systems for it. But it gives errors during ID configuration..
    Regards
    Monica

    Hi
    -->Whether the LOGICAL SYSTEMS are assigned to the Same client?It should be for different clients and one LS can assign to 1 existing client.
    -->U are creating 2 different TS as WEB AS ABAP so in that you will maintain the details of 2 different systems.
    -->finally creating the 2 different BS's in that maintain your LS and for each BS we need to assign the TS name and click finish.(NOTE:While assigning the TS to BS pls observe)
    Thanks.

  • Create Source System - Error

    Hi Gurus,
    I have to create a conexion with R3 so i did :
    1)Create RFC Conexion in SM59
    2)Create Source System in RSA1
    But in the last step of the creation Source System in RSA1 shows up the following Error Message:
    "The source system already exists"
    So i checked in the source system list, and it does not exists.
    Can anyone help me about this?
    THANKS A LOT !!!

    Hmm.. not very good over here.. but can you dubleclick and see if they are leading to different clients or not?
    I think they are 2 different clients of the R3's .. so this should be posible..
    Did you created a new logical system and new RFC destinations for this new one?
    May be that it is pointing out to the existing destination..
    regards,
    Hari

  • Creating source system in RSA1

    Hi guys,
    I’m trying to create a source system in the TC RSA1 between R/3 PRO y BW PRO. But at the end of the process it sent me the message Source system already exists. There is no other source system for R/3 created. What can it be?
    Thanks a lot
    Regards,
    Vic

    Hi Vic,
    Goto sm59 and delete the logical system for the R/3 system and retry the steps again.
    Check this doc:
    http://help.sap.com/bp_biv135/BBLibrary/documentation/B84_BB_ConfigGuide_EN_DE.doc
    The steps for creating source system (automatic option in RSA1)is as follows:
    1.Create remote logons in both the systems.
    2.RSA1 -> Source system -> Create source system -> automatic creation
    3. Enter the details of the R/3 system and the Remote logon ids of both the system. In case you are using BI 3.5 or greater + R/3 4.7 or greater the password is "case sensitive" hence have all the passwords in CAPS.
    4. Now the system would create a remote logon and show up the remote logon screen. In that screen -> "logon and security" -> enter the remote logon id and password and save. Now the remote logon should not work from there.
    The connection is established.
    Bye
    Dinesh

  • Rsa1 source system deactivation

    hello ,
    When i was working on rsa1 after creation of source system i right click the source system and pressed "RESTORE" but the object displayed deactivated symbol and trying to activate it but it still remain de activated
    please can any one tell me the solution to the problm
    on check it gives following error:
    "Source system <name> is inactive" ID RSAR
    Thank you in advance.

    Hello,
    Please check your RFC destination whether the source system already exists.
    In the source system creation you assign the IP address instead of source system name. Please go through the screens (SM59).
    If you have not used IP address you can ignore it.
    Thanks
    Chandran
    Edited by: Chandran Ganesan on Nov 13, 2008 2:30 PM

  • RSA1 Source System DBConnect problem with 8i DB

    I have just upgraded my BI instance to Oracle 11G.  After this, a source system connection to an Oracle 8i database configured using DBConnect does not work.  I have read that a connection between 11g instant client and an 8i database is not possible. 
    After switching back to the Oracle 10G instant client, the source system connection works fine.
    I'm just wondering if anybody has encountered this, and if there is any way to have the 11G instant client in place for SAP as a whole but have DBConnect use the 10G client to connect to the 8i DB.  Any insight is appreciated.  Thanks!

    Hello,
    Please check your RFC destination whether the source system already exists.
    In the source system creation you assign the IP address instead of source system name. Please go through the screens (SM59).
    If you have not used IP address you can ignore it.
    Thanks
    Chandran
    Edited by: Chandran Ganesan on Nov 13, 2008 2:30 PM

  • Creating multiple source systems one logical system

    Hi,
    The requirement is to create two source systems using same logical name and different RFC connections to ECC?
    We wanted to do some regular activities using one source system and some drill down activities using different source system.
    I am getting error when I try to create second source system "source system already exist"
    Please advice.
    Thanks.

    Hi,
    I dont think it is possible to create multiple source systems in a sinle logical client. You have to create multiple clients and you can connect to BI system by different RFCs.
    Hope this helps.....
    Regards,
    Suman

  • Transport managment, source system changed in import

    Hi all,
    i faced with the need to change the source system in transport management. I mean, dev source system to assign a different test system source. now is the following:
    InfoPackage ZPAK_4MSK400H4M9FGMEKV9ZGDSN4M, source system LGDCLNT300 changed by source system LGTCLNT010 in import (tr STMS).
    I'm looking for opportunities to change the target source systems LGPCLNT010.
    Where can I find a setting to change the source system during the import?
    Thnx.
    PS LGPCLNT010 source system already exists in test. only need to assign LGDCLNT300 (DEV) -> LGPCLNT010 (TEST).

    Hi,
    The entries  are maintained in table RSLOGSYSMAP. Goto SM30 put the table name and click on maintain.
    Or simply goto transport connection from RSA1 and click on "Conversion button" on tool bar.
    Regards,
    Durgesh.

  • Error when activate a SAP source system

    Hello Experts,
    I have an issue when I try to create a new SAP source system but I cannot complete this operation because a Timeout error occurs when the system made the destiny verification, the source system can be created but not activated, I already create the RFC connection and they are OK, I add the new logical system of the source system in the configuration (SBIW) in the general settings,and the data source tree is show succesfully and sems to work OK and the data sources seems to be OK too.
    In the RSA1 transaction, go to source systems tree, choose the SAP source system called: "conexion a dev 200" -> right click and choose activate and the error occurs.
    I have a Myself source system already created and activated, I cannot find the source of the problems thata cause the timeout error in the new source system.
    Thank you vey much in advance,
    Niurka

    Yes, I try ti use the create automatically option first but it doesn't work, because says that we system already exists because here exist a myself source system with an RFC to R/# ( I don't know why), so I must use the manually creation option, I put the logical system, and all the requeriments of the screem. The system create the source system but when I try ti activate it, it is impossible to do it....!
    I hope that you can give some tips or solution for this issue,
    Thanks!

  • Trouble in creating source system

    Hi,Alles.
    I want to create a source system(R/3) for BW, I create a new background user'SYS100' in client 100(R/3), then I create source system in BW,after inputed all parameters and continue to logon R/3 system, a window jumped out'User already exists in source system,Only continue if profile and password are correct.' I selected 'Continue'.Then window displayed 'RFC destination already exists in source system,Do you want to use this destination, check, or cancel source system connection?',I selected 'check',it displayed that 'the system already exist' is the BW self system(can't be changed and deleted).What the reason? Give me some hints,Thanks.

    http://www.sapgenie.com/sapgenie/docs/MySAP%20BW%20Cookbook%20Vol%202.pdf
    Try this link.
    Cheers!!!!!!!!!
    pls do assign points, if you feel answer to your questions are valuable.
    Message was edited by: BI Project

  • Source System Assignment  while Installing Business Content

    Hi,
      I have a new R/3 source system in BW (one R/3 system already exists). When I'm installing business content for say an Infosource and before, even with a succesful install , the new source system assignment is not taking place in the infosource and neither are the packages (for the new source system) being installed. The datasource (for the new source system) remains unassigned.
    Please Advice
    Thanks

    Hi Shurobhi
    with your new R/3 source system are you able to see the datasources - using right clik on source system & then select datasources overview. IF not then you need to check if the source system connection is done with metadata repository replication or not. If that is also done then ensure that you have installed all business content datasources using RSA5 in your R/3 system.
    On BW side, while installing transfer rules and infopackages, make sure that this new R/3 source system is checked on in source system Box - X icon on business content screen. Then only you would be able to see transfer rules and infopackages & install them.
    Hope this helps
    Regards
    Pradip

  • Error while creating SOURCE SYSTEM

    Hi All,
    I have a problem while creating Source System to a Solman syatem configured with BW content. I have configured few some source systems already in the same Solman System.The system shows the following error, previous to this i get the message a "generating connection to the source system"
    <b>Error in source system RXX_100
    Message no. RSAR502
    Diagnosis
    With Remote Function Call to system RXX_100 error Screen output without connection to user.  ccurred.
    Procedure
    Remove the cause of the error.</b>
    Kindly provide me suggestions and DOCS related to the same.
    Suitable points will be awarded for replies.
    Expecting your kind reply,
    Vineeth

    Hi ,
    In SCC4 the source client should not set as production when creating the source system connection between two systems.Please check below SAP note
    973555 - System must be open for creating/connecting source systems
    Thanks,
    Shanaka

Maybe you are looking for

  • HTML character entities problem in saved regex search and replace query

    I have a many search and replace regular expression queries (.dwr files) that I have saved. I have a problem specifically with saved queries that contain HTML entities such as "& nbsp ; " or "& shy ;" (spaces added otherwise code doesn't render in br

  • How can I cancel an itunes account

    I would like to cancel my I tune account in order I can create a new one in an other country but using my old Email address

  • Rebate: How to define Slab wise rebate

    DEAR SD GURUS n EXPERTS, Currently we are using a simple rebate system. Where we create the Material or Product Group wise Rebate Agreement for a customer --> Sales Order --> Delivery --> Billing than enter the Payment in the the Rebate agreement, Ge

  • JDeveloper with BPM Extensions in Mac OS X 10.8

    Has anyone been able to get JDeveloper BPM Studio (BPM Extensions) to work in Mac OS X 10.8??? I can't get it to create a new Application/project or open an existing (which was created in windows) application/project that has/uses BPM extensions (und

  • IView Caching

    Hi Portal Knowledgeable ones. I am on EP6 SP13. I am having a problem with caching.  I have a URL iview retrieving static content from root.../StaticContent/News.html.  After I update News.html on the portal server, the new content is not displaying.