Source system assignement in production

Hi all
Before importing any requests which are related to infosource , cubes and update rules into production, do we need to make any source system assignment in production system?
I have directly imported into production but there were no source system / data source assignments to these infosource.
can you please suggest what to do for these souce system assignments in production.
thanks in advance
AN

Hi,
you have to assign the production source system to your BW system. After replication of the DataSources, you can import your development from the BW development system.
Important is the conversion in the SPRO Transaction - Change source system name after transport. In this view you have to type in the source system name of the source system linked to your development system and the name of the source system linked to your production system. During import to production system, BW will automatically change the source system names.
regards
Juergen

Similar Messages

Source system assignment while transporting to quality

Hi Guys,
I have the following landscape.
I have created 2 source system ECCDEV and CRMDEV for my BIDEV.
Now I wish to do transport to Quality box and i want to know what should be the source system assignment , I should maintain in rsa1->transport connection -> conversion of logical system name.
When I maintain ECCDEV -
> ECCQUA
I get the error : ECCQUA entry does not exist in TBDLS.
Do I have to maintain source system ECCQUA(Quality) in BIDEV(Development) itself?
-Amit

Hi Rakesh,
Let me know if my understanding is correct.
In DEV BI, I create a connection to DEV ECC.
Also, I create source system ID's for source system.
In the QUA BI, I create a connection with QUA ECC.
and assign source system connection (source and target) i.e. DEVECC and QUAECC.
Then I transport requests(activated datasources) from DEVECC to QUAECC and replicate the datasource in QUABI.
Please Confirm.
-Amit

Mapping new product code from source system to old product code in Oracle COA

Mapping new product code from source system to old product code in Oracle COA
Here is the situation:
One of our legal entities is changing their product codes in their COA segment. We are not changing the code structure in the global SOB. Is there a workaround to pull the source system information into ADI (or any other tool) and map it to the current Oracle product code?
Thanks and regards,
[email protected]

Only The Data of Your Code will Change
then if you are trying to copy a standarad sap-code , you need to copy
every include, FM
there is a Copy option over there in program
you can do tat
thnkx bhanu

Source System Assignment while Installing Business Content

Hi,
I have a new R/3 source system in BW (one R/3 system already exists). When I'm installing business content for say an Infosource and before, even with a succesful install , the new source system assignment is not taking place in the infosource and neither are the packages (for the new source system) being installed. The datasource (for the new source system) remains unassigned.
Please Advice
Thanks

Hi Shurobhi
with your new R/3 source system are you able to see the datasources - using right clik on source system & then select datasources overview. IF not then you need to check if the source system connection is done with metadata repository replication or not. If that is also done then ensure that you have installed all business content datasources using RSA5 in your R/3 system.
On BW side, while installing transfer rules and infopackages, make sure that this new R/3 source system is checked on in source system Box - X icon on business content screen. Then only you would be able to see transfer rules and infopackages & install them.
Hope this helps
Regards
Pradip

Cannot see Source system Assignment after Transporting to QA

Hi All
I need your help once again, I transported a ODS object from DEV to QA, In dev it has a source system assignment but, in QA I don't see the source system assignment.
I went into sm59 and did a test connection and authorization, everything looks fine. I did a restore connection and replicated data sources, and transported again, but still I don't see the source system.
On R/3 side the application componenet nodes did not get transported with the data source.
Please let me know if I am missing anything that needs to be transported.
Thanks
Latha

Hello Latha,
Please see the import log for that transport in se01 in the BW dev system.What is the exact error messages it gives?U may need to also look at the long text of the messages.
Another point abt what u have said..that in the corresponding R/3 QA system,the datasource is not showing up in rsa6,am I right?
then there was some problem with the transport from R/3 dev,that contained the datasource definition.check that transport too..
cheers,
Vishvesh

Delete Source System Assignment for a DataMart Infosource in BW3.0B

Hello Experts:
Can one of you assist me with how to delete source system assignment for a system generated infosource(ie., Infosource existing under data Mart). i noticed that in case of an Info Cube, system provides an option to delete the source system assignment but not for an ODS.
I am trying to delete the system data source 8* that has been assigned to the data mart info source 8* and reassign the data source to my custom info source.
Any ideas would be highly appreciated.
BTW, we are on BW3.0B
Thanks,
Ragavan

Hi,
Go into the infosource with change mode. Open the transfer Rule/transfer structure and hit the delete button. It'll ask for delete datasource assignment. That would delete the source system assignment.
Cheers,
Kedar

Importance of "Source System Assignment While transporting the objects

Hi Friends,
What is the Importance of "Source System Assignment While transporting the objects. And when do we select this icon. what is the exatly significance for this.
Thanks in advance for all......
Regards,
Ramesh.

HI Rameshpennabadi ,
This option is only enable for object like transfer rule, data source and IP if you want them to assign source systems,other wise the dialog box Choose Source system by Default? appears.
Thanks,
Deepak

Transport of Source System assignment for a Virtual Cube

Built a transport with the datasources, transfer rules, cubes etc..
After transport to my Q system - in the Q system I am not seeing any source system assignment for my remote cube
OBviously it exists in Dev
Everythign else is fine - datasource, infosource trasnfer rules but nothing underneath the infocube where the source system normally is
transport before and after in the transport conenctor picks up nothing to be transported
Logical system mapping table in Q is fine (naturally - because the datasouces got there) - replicate all done
Any ideas?

hi Simon,
check sap help
http://help.sap.com/saphelp_nw04/helpdata/en/3b/63c620e18411d4b2d90050da4c74dc/frameset.htm
The source system assignments are local to the system and are not transported.
hope this helps.

What is delete Source system assignment???

Hello All,
If we go inside Infosource in Source system and then right click there. One option there is " Delete Source System assignment" .
If we chosse this option then what will happen? Can i reassign infosource to new souce system after chosing this??
Thanks for reply

Hi,
Yes, this deltes the sync between source sytem(DATA SOURCE) to bi.(INFOSOURCE)
and you can get connected to another source system, but this may lead to problems. so make sure before delte the sourcesys asigment and going for new one.
Edited by: Aduri on Dec 26, 2007 10:08 AM

Business Content Source System Assignment???

Hi Gurus,
i am installing Business content and after going thru few posts in this Forums i have been hearing about Source system assignment in the Business content screen.
but when ever i installed i never really used this option and we have only one R/3 source system
Can anybody explain me its functionality please
thankyou
harish

When you activate Business Content, DataSources from source systems are assigned to InfoSources in SAP BW. If you do not select a source system, all source systems are automatically assigned. If you have several source systems this may take a lot of time because transfer rules have to be activated for each DataSource from each source system.
However an assignment of a DataSource to an InfoSource may not be necessary for all existing Source systems.
Assign only the source systems you need to load data from for the Business Content Objects that you are going to activate.
You can subsequently change the selection you made.
The assignment of source systems is only relevant for transfer rules, DataSources and InfoPackages. If there is more than one source system, only those objects assigned to the specified source system are collected for the transfer. Objects that have not been assigned to the specified source systems are ignored.

Source system Assignment for Virtual Cube

HI,
I transported infosource and transfer rules to production, but source system is not transported. if i am right i think i need to assign source system(prd) manually. but in prd all objects are not changeble, then how can i assign the source system to infosouce.
Regards
Rajini

HI,
I transported infosource sucessfully to production , but when i am trying to transport transfer rules , giving warning source system is not transportable. this is happening with remote cube only. all other normal transports are fine.
i think there is a special way to transport TR for remote cube. pls. help me.
Rajini

Source system assignment in Remote Cubes

Hi Gurus,
Currently we are using FI-GL 10 Data source to provide Balance sheet reports. My Client wants faster access to data more frequently so we decided on using Remote Cube. I activated Remote cube from business content and relevant Infosource. As far as i know next steps would be to create transfer rules and assign source system.
Since 0FI_GL_10 is already used by other cubes i am not able to create source system connection. We are in BI 7.0. Can any one tell me how to connect it. Also can you please provide me the steps for using Remote Cubes ?
Surya

Hi,
Check the links below.
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/2f6d9790-0201-0010-dcbc-e099c7c049a2
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/24ee9190-0201-0010-6da9-e7d70f28970f
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/2a739790-0201-0010-5088-cb9b950b2462
How to... remote cube
Regards.

Source System Assignment in Update rules

Hello Friends,
Good Day....
I need to extract both transaction data and master data from four different source systems and the data is also different from one soure system to another system.
In BW iam using same infoobjects and the transfer rules,update rules and the datatargets are different. so how can i differentiate data from one system to another system with the same info objects.
<i>where can i do the code can we do that in update routines?
or do we need to do compounding?</i>
sorry friends if i am asking an easy question got confused here....please let me know if any solution.
Regards,
Ala.

Ala,
You could use the client number as a key field / dimension to uniquely identify the records , als you can look out for this info Object called LOGSYS whish if present will get updated by the logical system name or have an infoobject for the same and since your transfer rules will be different for each , have the IOBJ populated by a constant depending on the client and then update the data to the data targets , that should solve your problem.
Hope it helps..
Arun
Assign points if helpful

Display Datasource in Source System -- connects to Production ERP

Hello,
We have performed a System Copy of BI Prod. In the copied system on one of the Generic DataSource (ZBIP_VKDFSEXT) when I right click and say "Display Datasource in Source System", it is connecting to Production ERP, supposedly it must be connecting to Dev ERP.
I have tested RFC COnnections and Logical System Settings in WE20 and 21, but they are pointing to DEV ERP.
Correct replies appreciated.
Thanks
SM
Edited by: SM on Jul 9, 2011 5:32 AM

Dear SM,
I guess we have faced same kind of issue earlier,
at that time we just removed RFC connection between production system because we are not using Production system connection any more.
and then just clicked on connection parameter of source-system, there we defined new RFC destination.
Hope it will solve your issue.
Regards,
Ashish

Fresh source system clients in production BW system

Hi,
In my production BW system,all transfer rules currently point to 400 clients of source systems.
Now requirement has changed and test data is being created in 310 clients of source systems,and not the 400 clients.
I know about new source system creation and RFC connections in sm59,but how to (in a simple way) make all transfer rules to point to the 310 clients,instead of the 400 clients.
Thanks,
Vishvesh

Hello,
This issue got resolved by using below steps..
The requirement is that Clients 400 connection should no longer exists in BW and replaced by clients 310
Below steps would hold good if the datasources of
CLNT310 & CLNT400 are identical.
1) Delete CLNT310 in BW (no Datasources of this system is used in BW)
2) run BDLS in BW change CLNT400 to CLNT310
3) Run RSAP_BIW_DISCONNECT in 310 clients ..
f) Restore connection CLNT310
Cheers,
Vishvesh

Source system assignement in production

Similar Messages

Maybe you are looking for