Source system Assignment for Virtual Cube

HI,
I transported infosource and transfer rules to production, but source system is not transported. if i am right i think i need to assign source system(prd) manually. but in prd all objects are not changeble, then how can i assign the source system to infosouce.
Regards
Rajini

HI,
I transported infosource sucessfully to production , but when i am trying to transport transfer rules , giving warning source system is not transportable. this is happening with remote cube only. all other normal transports are fine.
i think there is a special way to transport TR for remote cube. pls. help me.
Rajini

Similar Messages

Transport of Source System assignment for a Virtual Cube

Built a transport with the datasources, transfer rules, cubes etc..
After transport to my Q system - in the Q system I am not seeing any source system assignment for my remote cube
OBviously it exists in Dev
Everythign else is fine - datasource, infosource trasnfer rules but nothing underneath the infocube where the source system normally is
transport before and after in the transport conenctor picks up nothing to be transported
Logical system mapping table in Q is fine (naturally - because the datasouces got there) - replicate all done
Any ideas?

hi Simon,
check sap help
http://help.sap.com/saphelp_nw04/helpdata/en/3b/63c620e18411d4b2d90050da4c74dc/frameset.htm
The source system assignments are local to the system and are not transported.
hope this helps.

Delete Source System Assignment for a DataMart Infosource in BW3.0B

Hello Experts:
Can one of you assist me with how to delete source system assignment for a system generated infosource(ie., Infosource existing under data Mart). i noticed that in case of an Info Cube, system provides an option to delete the source system assignment but not for an ODS.
I am trying to delete the system data source 8* that has been assigned to the data mart info source 8* and reassign the data source to my custom info source.
Any ideas would be highly appreciated.
BTW, we are on BW3.0B
Thanks,
Ragavan

Hi,
Go into the infosource with change mode. Open the transfer Rule/transfer structure and hit the delete button. It'll ask for delete datasource assignment. That would delete the source system assignment.
Cheers,
Kedar

Source system assignment in Remote Cubes

Hi Gurus,
Currently we are using FI-GL 10 Data source to provide Balance sheet reports. My Client wants faster access to data more frequently so we decided on using Remote Cube. I activated Remote cube from business content and relevant Infosource. As far as i know next steps would be to create transfer rules and assign source system.
Since 0FI_GL_10 is already used by other cubes i am not able to create source system connection. We are in BI 7.0. Can any one tell me how to connect it. Also can you please provide me the steps for using Remote Cubes ?
Surya

Hi,
Check the links below.
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/2f6d9790-0201-0010-dcbc-e099c7c049a2
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/24ee9190-0201-0010-6da9-e7d70f28970f
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/2a739790-0201-0010-5088-cb9b950b2462
How to... remote cube
Regards.

How to transport inforource assignment for virtual cube?

hi,
I have created SAP Remote Cube on dev, transported it and its infosource, but I do not know how to transport cube - infosource assignment.
How to do this?
Regards,
Andrzej

hi Maran,
you were wrong, but I solved this problem - system assignment is not transportable.
http://help.sap.com/saphelp_nw04/helpdata/en/3b/63c620e18411d4b2d90050da4c74dc/frameset.htm
Regards,
Andrzej

Error while assigning source system to SAP Remote cube

I need to do a query using remote cube and the source sys is flat file.
it wont let me assign the source system to the remote cube.
the r/3 system icon is seen next to the remote cube technical name...
I can't see my flatfile source system
can somebody help me.

Hello Kiran,
I don't think its possible to use Remote cubes for PC_FILE or FLAT FILE as Source system.
You can use Virtual Providers in these different scenarios
Virtual Providers based on DTP => used for SAP source systems
Virtual Providers based on BAPI => used for non-SAP or external systems
Virtual Providers bsaed on Function modules => You use this VirtualProvider if you want to display data from non-BI data sources in BI without having to copy the dataset into the BI structures. The data can be local or remote. You can also use your own calculations to change the data before it is passed to the OLAP processor. This function is used primarily in the SAP Strategic Enterprise Management (SEM) application.
Use InfoObects as Virtual Providers
Your case is none of these.
More details can be found under this link:
http://help.sap.com/saphelp_nw70/helpdata/EN/84/497e4ec079584ca36b8edba0ea9495/frameset.htm

Source system assignement in production

Hi all
Before importing any requests which are related to infosource , cubes and update rules into production, do we need to make any source system assignment in production system?
I have directly imported into production but there were no source system / data source assignments to these infosource.
can you please suggest what to do for these souce system assignments in production.
thanks in advance
AN

Hi,
you have to assign the production source system to your BW system. After replication of the DataSources, you can import your development from the BW development system.
Important is the conversion in the SPRO Transaction - Change source system name after transport. In this view you have to type in the source system name of the source system linked to your development system and the name of the source system linked to your production system. During import to production system, BW will automatically change the source system names.
regards
Juergen

Source system assignment while transporting to quality

Hi Guys,
I have the following landscape.
I have created 2 source system ECCDEV and CRMDEV for my BIDEV.
Now I wish to do transport to Quality box and i want to know what should be the source system assignment , I should maintain in rsa1->transport connection -> conversion of logical system name.
When I maintain ECCDEV -
> ECCQUA
I get the error : ECCQUA entry does not exist in TBDLS.
Do I have to maintain source system ECCQUA(Quality) in BIDEV(Development) itself?
-Amit

Hi Rakesh,
Let me know if my understanding is correct.
In DEV BI, I create a connection to DEV ECC.
Also, I create source system ID's for source system.
In the QUA BI, I create a connection with QUA ECC.
and assign source system connection (source and target) i.e. DEVECC and QUAECC.
Then I transport requests(activated datasources) from DEVECC to QUAECC and replicate the datasource in QUABI.
Please Confirm.
-Amit

Source System Assignment while Installing Business Content

Hi,
I have a new R/3 source system in BW (one R/3 system already exists). When I'm installing business content for say an Infosource and before, even with a succesful install , the new source system assignment is not taking place in the infosource and neither are the packages (for the new source system) being installed. The datasource (for the new source system) remains unassigned.
Please Advice
Thanks

Hi Shurobhi
with your new R/3 source system are you able to see the datasources - using right clik on source system & then select datasources overview. IF not then you need to check if the source system connection is done with metadata repository replication or not. If that is also done then ensure that you have installed all business content datasources using RSA5 in your R/3 system.
On BW side, while installing transfer rules and infopackages, make sure that this new R/3 source system is checked on in source system Box - X icon on business content screen. Then only you would be able to see transfer rules and infopackages & install them.
Hope this helps
Regards
Pradip

Cannot see Source system Assignment after Transporting to QA

Hi All
I need your help once again, I transported a ODS object from DEV to QA, In dev it has a source system assignment but, in QA I don't see the source system assignment.
I went into sm59 and did a test connection and authorization, everything looks fine. I did a restore connection and replicated data sources, and transported again, but still I don't see the source system.
On R/3 side the application componenet nodes did not get transported with the data source.
Please let me know if I am missing anything that needs to be transported.
Thanks
Latha

Hello Latha,
Please see the import log for that transport in se01 in the BW dev system.What is the exact error messages it gives?U may need to also look at the long text of the messages.
Another point abt what u have said..that in the corresponding R/3 QA system,the datasource is not showing up in rsa6,am I right?
then there was some problem with the transport from R/3 dev,that contained the datasource definition.check that transport too..
cheers,
Vishvesh

Importance of "Source System Assignment While transporting the objects

Hi Friends,
What is the Importance of "Source System Assignment While transporting the objects. And when do we select this icon. what is the exatly significance for this.
Thanks in advance for all......
Regards,
Ramesh.

HI Rameshpennabadi ,
This option is only enable for object like transfer rule, data source and IP if you want them to assign source systems,other wise the dialog box Choose Source system by Default? appears.
Thanks,
Deepak

What is delete Source system assignment???

Hello All,
If we go inside Infosource in Source system and then right click there. One option there is " Delete Source System assignment" .
If we chosse this option then what will happen? Can i reassign infosource to new souce system after chosing this??
Thanks for reply

Hi,
Yes, this deltes the sync between source sytem(DATA SOURCE) to bi.(INFOSOURCE)
and you can get connected to another source system, but this may lead to problems. so make sure before delte the sourcesys asigment and going for new one.
Edited by: Aduri on Dec 26, 2007 10:08 AM

Business Content Source System Assignment???

Hi Gurus,
i am installing Business content and after going thru few posts in this Forums i have been hearing about Source system assignment in the Business content screen.
but when ever i installed i never really used this option and we have only one R/3 source system
Can anybody explain me its functionality please
thankyou
harish

When you activate Business Content, DataSources from source systems are assigned to InfoSources in SAP BW. If you do not select a source system, all source systems are automatically assigned. If you have several source systems this may take a lot of time because transfer rules have to be activated for each DataSource from each source system.
However an assignment of a DataSource to an InfoSource may not be necessary for all existing Source systems.
Assign only the source systems you need to load data from for the Business Content Objects that you are going to activate.
You can subsequently change the selection you made.
The assignment of source systems is only relevant for transfer rules, DataSources and InfoPackages. If there is more than one source system, only those objects assigned to the specified source system are collected for the transfer. Objects that have not been assigned to the specified source systems are ignored.

Data source on top of virtual cube s_r_infoprov expection

hi experts,
i have generated a export datasource on virtual cube. The virtual cube is based on a function module.
When I display data in virtual cube it shows all the data .When I extract the data from it through DTP , it works well.
But when i am using data source(exported data source) to pull the data from the virtual cube it is not pulling the data.
It is throwing an exception at the following place.
CALL FUNCTION 'RSDRI_INFOPROV_READ'
       EXPORTING
                                                        "begin qyh030513
         i_infoprov             = l_infoprov "'/CPMB/ASFIN'
*        i_infoprov             = do_util->do_appl_info_m-MULTIPROV "'/CPMB/ASFIN'
                                                          "end qyh030513
         i_th_sfc               = lth_sfc
         i_th_sfk               = lth_sfk
         i_t_range              = lt_range
         i_rollup_only          = space
         "i_use_db_aggregation   = abap_true "abap_true "RS_C_TRUE
         i_use_db_aggregation   = IF_DB_AGGREGATE "abap_true "RS_C_TRUE
         i_use_aggregates       = abap_true "abap_true "RS_C_TRUE
         i_packagesize          = i_packagesize
         i_authority_check      = space
         i_currency_conversion = space
       IMPORTING
         e_t_data               = et_data
         e_split_occurred       = e_split_occurred
         e_end_of_data          = e_end_of_data
         e_stepuid              = l_stepuid
       CHANGING
         c_first_call           = c_first_call
       EXCEPTIONS
         illegal_input          = 1
         illegal_input_sfc      = 2
         illegal_input_sfk      = 3
         illegal_input_range    = 4
         illegal_input_tablesel = 5
         no_authorization       = 6
         illegal_download       = 8
         illegal_tablename      = 9
         OTHERS                 = 11.
When we go inside this function module in debugging the below code will be there
STATICS: s_r_infoprov   TYPE REF TO cl_rsdri_infoprov.
   CLEAR: e_t_msg.
   IF i_clear = rs_c_true.
     CLEAR s_r_infoprov.
     RETURN.
   ENDIF.
IF s_r_infoprov IS NOT INITIAL AND c_first_call = rs_c_true.
*   nested call of RSDRI_INFOPROV_READ
     MESSAGE e882(dbman) RAISING illegal_input.
   ENDIF.
Problem is with the s_r_infoprov value. When I execut with data source in RSA3 then the value is {O:222*\CLASS=CL_RSDRI_INFOPROV}
and when I executed directly the virtual cube the value for s_r_infoprov is initial.
So because of this value {O:222*\CLASS=CL_RSDRI_INFOPROV} the following code got executed and throwing an exception.
Experts please guide how to solve this. will data source on top of virtual cube wont work?
thank you

Hi Sander,
Thank you for the reply.
I am trying to understand why an virtual cube is not working if it is generated as an exported data source and it is working perfectly if directly connected as a source to DSO or Cube?
Problem is with the s_r_infoprov value. It is getting populated differently , that is why there is an exception which using data source(virtual cube generated as exported data source).
If this functionality is not going to work then why SAP has given an option to generate an exported DS of virtual cube.
thank you for all giving some valuable inputs on this. Some how some thing is missing it seems....

No system assigned for partner in transaction DPCOMMON_MAP_P_S ( Dealer Portal)

Hello all,
Sorry to post a very basic question, but I am quite new to Dealer Portal and SD functional module. Request to help.
I have deployed spare part business package on portal. BP documentaion link. http://help.sap.com/erp2005_ehp_04/helpdata/EN/c3/f71b9a69574d6c84ac33b68d2d03c3/frameset.htm
I have configured as per the steps mentioned in the link below,but still facing issues..
http://help.sap.com/erp2005_ehp_05/helpdata/en/e6/e58079420c4b7e87df4f9c3db04719/content.htm?frameset=/en/e6/e58079420c4b7e87df4f9c3db04719/frameset.htm
As per the above link,below are the steps done.
I have created logical system and assigned to RFC destination using transaction DPCOMMON_MAP_S_R.
Then assigned the logical system created at the above step to partner, through transaction DPCOMMON_MAP_P_S
And lastly also assigned users to partners through transaction DPCOMMON_MAP_U_P.
However I am getting below errors when initial overview screen is accessed,I think there are some configurations missing.. Any help is appreciated.
Personalization data not found.
No system assigned for partner in transaction DPCOMMON_MAP_P_S
Thanks
San

Issue is resolved.
For the RFC destination , log on security tab. Ensure current user is ticked and no hard coded user id being passed here.
Also ensure the personalization data is saved properly by navigating to personalization iview.

Source system Assignment for Virtual Cube

Similar Messages

Maybe you are looking for