Source System Assignment while Installing Business Content

Hi,
I have a new R/3 source system in BW (one R/3 system already exists). When I'm installing business content for say an Infosource and before, even with a succesful install , the new source system assignment is not taking place in the infosource and neither are the packages (for the new source system) being installed. The datasource (for the new source system) remains unassigned.
Please Advice
Thanks

Hi Shurobhi
with your new R/3 source system are you able to see the datasources - using right clik on source system & then select datasources overview. IF not then you need to check if the source system connection is done with metadata repository replication or not. If that is also done then ensure that you have installed all business content datasources using RSA5 in your R/3 system.
On BW side, while installing transfer rules and infopackages, make sure that this new R/3 source system is checked on in source system Box - X icon on business content screen. Then only you would be able to see transfer rules and infopackages & install them.
Hope this helps
Regards
Pradip

Similar Messages

Errors while installing Business Content

Hi,
It is new system, When I am trying to install any Infocube it has given Runtime error OBJECTS_OBJREF_NOT_ASSIGNED. Then implemented the SAP note 1019055.
To Install Business Content I am following: Grouping: In Data flow before and After wards, Collection Mode- Collect Automatically, Source System Assignment and Install .
Now when I am trying to install I am getting these errors
Process LOADING, variant 0PAK_0U36G4BPCOA4BN43PFVZU3A97 has been saved in target system under name1
Process LOADING, variant 0PAK_0AWN44OD08M313H1SIIA96HT7 has been saved in target system under name 1
Process variant LOADING 0PAK_0AWN44OD08M313H1SIIA96HT7 does not exist in version A
A type "Attribute Change Run" process has to follow process "Execute InfoPackage" var.0PAK_0AWN44OD08M313H1SIIA96HT7 in the chain
A type "Data Transfer Process" process has to follow process "Execute InfoPackage" var.0PAK_0AWN44OD08M313H1SIIA96HT7 in the chain
Process variant LOADING 0PAK_0MPC1AWCV7TGZ1CJ843SRIJZD does not exist in version A
InfoPackage no longer exists in object version A in table RSLDPIO
Variant '0PAK_1909HG1UYCGTBUE171UNQCSDN' of process type 'LOADING' not found in A version
InfoPackage no longer exists in object version A in table RSLDPIO
There many errors of this type.
How to solve the problem. Please help me.
Thanks in advance.
Jaswantha

Hi Jaswantha,
Installing Business Content Cube would usually require "Grouping" as "Select In Data Flow Before".
This is as per my observations so far according to SAP Best Practices.
Pls. try this and get back.
Hope it helps
Regards
PPMM

How to select the all object at a time while installing business content

Hi All,
how to select the all object at a time while installing business content Please let me know if nay document is there
Thanks Ahmed Pasha

Hi,
Please check out the below links
[Business content Installation|http://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/library/uuid/102906a4-f13d-2e10-7199-ce316ff254b8?QuickLink=index&overridelayout=true ]
[BI Content|http://wiki.sdn.sap.com/wiki/display/BI/InstallingBusinessContent]
Hope it helps.
Regards,
AL

OBJECTS_OBJREF_NOT_ASSIGNED : Error while installing business content

Hi
Error occured while installing business content
ABAP/4 Processor:OBJECTS_OBJREF_NOT_ASSIGNED
Please help me how to resolve the issue
Regards
ASR

Hi,
Check in SDN... becasue there are n number of resons for that..
/thread/1056689 [original link is broken]
http://sap.ittoolbox.com/groups/technical-functional/sap-dev/erro-in-background-job-abap4-processor-objects_objref_not_assigned-252195
Thanks
Reddy

Importance of "Source System Assignment While transporting the objects

Hi Friends,
What is the Importance of "Source System Assignment While transporting the objects. And when do we select this icon. what is the exatly significance for this.
Thanks in advance for all......
Regards,
Ramesh.

HI Rameshpennabadi ,
This option is only enable for object like transfer rule, data source and IP if you want them to assign source systems,other wise the dialog box Choose Source system by Default? appears.
Thanks,
Deepak

Source system assignment while transporting to quality

Hi Guys,
I have the following landscape.
I have created 2 source system ECCDEV and CRMDEV for my BIDEV.
Now I wish to do transport to Quality box and i want to know what should be the source system assignment , I should maintain in rsa1->transport connection -> conversion of logical system name.
When I maintain ECCDEV -
> ECCQUA
I get the error : ECCQUA entry does not exist in TBDLS.
Do I have to maintain source system ECCQUA(Quality) in BIDEV(Development) itself?
-Amit

Hi Rakesh,
Let me know if my understanding is correct.
In DEV BI, I create a connection to DEV ECC.
Also, I create source system ID's for source system.
In the QUA BI, I create a connection with QUA ECC.
and assign source system connection (source and target) i.e. DEVECC and QUAECC.
Then I transport requests(activated datasources) from DEVECC to QUAECC and replicate the datasource in QUABI.
Please Confirm.
-Amit

Source System not collected with business content Activation

I'm trying to activate some business content and have previously assign the source system (R/3). When I'm selecting an infosource and select as grouping in data flow before the source system is not collected.
This is a new BW 3.5 connected to a ECC. It has to be silly but I don't know what else to check. I was surprise to see that the source system was created with the icon of a BW system. But I think that this is just because the ECC appart of being an R/3 system is also a BW instance.
Well, any help appreciated and kindly rewarded.
Thanks,
Alberto Sabate

Thanks but,
I have tryed multiple times activating my infosources selecting only one source system, all of the available or none at all. No matter what I do the system collects only the Infosource with the communication structure but does not go down to the transfer rules and assignment of the available datasource.
I don't know what to do now. I'm obviously selecting the grouping with "in data flow before".
I'm running out of ideas.
Thanks all,
Alberto Sabate

Error while installing Business Content SD Cubes

Hello BW Guru's,
I am installing the business content for the sales overview infocube with the grouping option data flow before & later sometime it says that backgorund programm was been modified.
I checked it in st22 its showing an dump with the status msg LOAD_PROGRAM_LOST error.
What could be the problem? how to resolve this issue?
Please through some inputs on this issue....
Points Asssured.
Urs,
RK.

Hi,
The LOAD_PROGRAM_LOST error occurs when there are two
or more versions of a given program loaded into the buffer at any given time. This happens when the program is changed by one user while it is still in use by another user.
When a user gets to the program that is having this problem and R/3 attempts to load the generated version from the buffer, it sees that the version is not the most current and tries to swap it out for the most current, but the load was lost from the pxa buffer, hence the dump of LOAD_PROGRAM_LOST.
To correct the error you need to run tranx SAMT & regenerate the program(s) that are listed in the dump. You can then do a $SYNC in the OK code field in the affected applciation server, but the other application servers should not be running. After the $SYNC, the other app servers can be brought up and the
buffers should then be in sync.
Hope this helps,
Regards
CSM Reddy

Error while installing business content.

Hi Guys,
I am trying to install busineness content for 0BPARTNER. while i am installing i am getting the below error.
InfoObject 0CUST_CLA is used in transfer rules (M) of characteristic 0BPARTNER
Please help me to take the action to correct this error.
thanks in advance
peter b

Hi,
Please check 0CUST_CLA this infoobject is activated or not if not pls active that.
http://help.sap.com/saphelp_nw70/helpdata/en/a2/2af638350d5654e10000000a11402f/frameset.htm
Regards,
Madhu

Business Content Source System Assignment???

Hi Gurus,
i am installing Business content and after going thru few posts in this Forums i have been hearing about Source system assignment in the Business content screen.
but when ever i installed i never really used this option and we have only one R/3 source system
Can anybody explain me its functionality please
thankyou
harish

When you activate Business Content, DataSources from source systems are assigned to InfoSources in SAP BW. If you do not select a source system, all source systems are automatically assigned. If you have several source systems this may take a lot of time because transfer rules have to be activated for each DataSource from each source system.
However an assignment of a DataSource to an InfoSource may not be necessary for all existing Source systems.
Assign only the source systems you need to load data from for the Business Content Objects that you are going to activate.
You can subsequently change the selection you made.
The assignment of source systems is only relevant for transfer rules, DataSources and InfoPackages. If there is more than one source system, only those objects assigned to the specified source system are collected for the transfer. Objects that have not been assigned to the specified source systems are ignored.

Error installing business content

Hi Experts,
i am getting an error while installing business content for sales and distribution.
i.e-The creation of the export DataSource failed,
The metadata for a DataSource must be created while the export InfoSouce is being generated. An error occurred at that time.
could any body help.

Hi
The DS should be Activated at R/3 to Install the Business Content on BI side.
Recheck the same with the following
R/3
RSA5--Activate the Data Source -- (RSA6 -- Transport the Data Source -- required if you want to replicate on BI Side)
BI Side
Business Content -- Install the same with required grouping conditions (Only necessary objects would be best option)
https://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/library/uuid/5c13db90-0201-0010-e59d-bdd1c7b3f8c5
http://help.sap.com/saphelp_nw04s/helpdata/en/5e/e88afcfc724d9d865793da9693dce6/frameset.htm
http://help.sap.com/saphelp_nw04/helpdata/en/d8/8f5738f988d439e10000009b38f842/frameset.htm
Hope it helps and clear

Unable to 'set the default source system' to Install Business Content

Hi,
Maars here. This is my first post hoping that in future ones I'll also be lending a helping hand.
I am trying to 'Install Business Content' under the BUSINESS CONTENT section in txn RSA1. I am doing this after 'Transfer Data Sources' in R/3 and I can now see all the data sources (under the application component hierarchy) for the source system. But I am not able to see the Info Objects in the Business Content.
When I try to set R/3 as the default source system (got this screen after clicking a icon in the standard tool bar), BW is not saving the settings ie., I set the R/3 as the default and then click on OK. If I go back to the same screen again, I find that my settings were NOT saved.
Could you please help me out?
Thank you.

Hi,
It seems to be a bug in version 3.5.
Do like this:
After you open the screen to <i>choose the dafault source system</i>
Clcik on 3rd button(F6) available in the bottom of the scrreen.
And then select teh tick mark for required system.
And then click on Continue button
You have do this step before you drop the cube to right side of the cube.
Ok, even after all these steps , if you reopen the screen you would not see Tick mark u have done just before. DONOT WORRY ABT it.
Drag and drop required cube with dat flow before.
Now you can see the Transfer rules with selected Source system only in the collected Objects.
With rgds,
Anil Kumar Sharma .P

Source system not Active error while installing BI content cube

Hi.,
When I try to install the BI content cube, In logs it is showing the error message as "Source client not Active". I activated the source system in modelling tab. Still the problem continues. In source system assignment of BI content the source client is also checked. Please give me a solution.

Hi Selva,
If you want to select only infocube, select "Only necessary objects" in grouping. If you want everything related to Info cube, then system will collect data source also and for that it will check if you are authorized in source system. Please check if the source system is connected to BI or you can do one thing activate the data source in source system and replicate it in BI.
Regards,
Kams

Error installing Business Content: InfoObject Catalogs

hi all,
just new in this community and hope you can help with my encountered problem regarding Installation in BI content.
I'm trying to activate:
InfoObject Catalog (technical name) : 0CHANOTASSIGNED
InfoObject Catalog(description)        : Unassigned characteristics
upon installation here is the job log that i got:
Message text | Message class | Message no. | Message type
Replication completed successfully | RSAOLTP | 33 | S
Replication completed successfully | RSAOLTP | 33 | S
The object R3TR ISTS 0CUST_CLASS_TEXT_BA does not exist | TK | 233 | S
Assign a package | TR | 709 | S
Specify the package or flag it as a local object | TR | 742 | E
Job cancelled after system exception ERROR_MESSAGE | 00 | 564 | A
what seems to be the error here?
thanks and regards,
karl

hi chintamanim,
thanks for the response.
i verified the objects included on the BI content objects window and noticed that the object 0CUST_CLASS_TEXT "active version" is not available and i tried finding 0CUST_CLASS_TEXT_BA and cannot find it.
does this have an effect on the error i got from activating and receiving the error upon activation?
The object R3TR ISTS 0CUST_CLASS_TEXT_BA does not exist
I did follow a document for Building Block Configuration Guide:
B03: General Settings for BI Integration
and the step is included here:
Activating Business Content: InfoObject Catalogs:
1.     On the Data Warehousing Workbench: Business Content screen:
a.     At the top of the right hand frame, choose Grouping and select In Data Flow Before.
b.     At the top of the right hand frame, choose Collection mode and select collect automatically.
c.     In the left hand frame, select Object Types.
d.     In the middle frame, expand InfoObject Catalog and make a double-click on Select Objects.
2.     In the Selection of Query Objects dialog box.
a.     Select the following InfoObject catalog:
0CHANOTASSIGNED
b.     Choose Transfer Selections.
c.     If a dialog box Remote Activation in the Source System <> occurs, choose OK and log on to the source system on the following screen.
d.     If a dialog box appears Exceeded runtime when collecting objects choose Continue.
3.     At the top of the right frame, choose Install and select Install in Background.
4.     In the Install Business Content in the Background dialog box choose Yes.
5.     In the Information dialog box choose Continue.
6.     Choose Exit.
please advise on how to continue.
thanks and regards

DSO Activation Error - While Installing BI Content

HI Friend,
    First, I deleted one sap source systems for BW1 ( My bw1 server BI is : BW1CLNT100 ), later ,I create the same sap source system, But active 0FIAP_O03 ods,
had error:
DataSource 80FIAP_O03 does not exist in source system BW1CLNT100 of version A
Error when creating the export DataSource and dependent Objects
Error when activating DataStore Object 0FIAP_O03
I go to BW1CLNT100 datasoucres ,I not finded 80FIAP_O03 datasoucre, But I goto bw prd BI datasoucre, I found   80FIAP_O03 datasoucre.
I think loss 80FIAP_O03 datasoucre for BW1CLNT100 source system, because I am't delete Roules on the 0FIAP_O03 infosoucre for delete sap soucre systems.
DSO Activation Error - While Installing BI Content
this problem no issue, So I create new thread.
Now, How could me create or load 80FIAP_O03 datasoucre for BW1CLNT100 source system?
Now, I Replicate Datascoure for BW1CLNT100 source system, Delete old datasocure....... I go home, I will try tomorrow .

Hello,
You should generate the export data source for 0FIAP_O03 again, if there is still a problem please goto
RSA1 > SOURCE SYSTEMS > and right click on the relevant source system, find the datamart application component and
right click on this to replicate the datasource.
Best Regards,
Des

Source System Assignment while Installing Business Content

Similar Messages

Maybe you are looking for