Source System between 2 systems : problem!

Hi experts,
I have 2 BW : test (BWD) and production (BWP).
I have one ODS dataflow, and the BWD must be referes to SAP R/3 (600).
The problem is that the dataflow refers the source system SAP R/3 (100)! Because before, we had 2 source system: 100 and 600. But now I only want the 600.
The majory of the objects referes to 600 now, exept the ODS dataflow.
What I have to do to transform the dataflow from 100 to 600 in BWD system? I have to transport from BWP to BWD?
Did u understand me?
thanks a lot!

Hi Vera,
Can you go to the RFC that you are using for creation of system in rsa1 and see if you are able to do a remote logon?
sometimes, the user may be locked. If the authorization check for the user works fine, you should be able to create the system.
This might solve the issue. In case you have any other trouble shooting method. Please share.
Thanks!
Rahul.

Similar Messages

Myself Source system problem after System Copy

Hi All,
We recently did a system copy (Production -> Dev). After the logical system rename is done, the myself source system is showing up as a External SAP system, in source system tree under SAP instead of BI. I'm not able to restore/activate it. Any inputs on this problem is appreciated.
Thanks & Regards,
Sree

Problem was with inconsistency in the RSBASIDOC table. Solved by deleting invalid entry and running BDLS again for this specific table.

Source system problem.

Hello All,
I Transported the Request BWD To BWQ but request ennded with errors i collected all the objects
Message no. RSAR409
Diagnosis
Source system ZDBREMEDY is not known.
System Response
The imported data for DataSource was deleted again because the referenced source system does not exist and no mapping is defined in table RSLOGSYSMAP on an existing productive source system.
Please Suggest..
Thanks
Prakash

HI SVU, Gaurav
Thanks for ur reply's.
I have maintained the source system in TP-Request
This is UD-Connect Datasource
In BWD -- RSA1 -- source system -- under the UD-Connect folder it is showing
SDK_JDBC --ZDBREMEDY
But same folder in BWQ & BWP -- I did't see any thing in that UD-Connect Folder
What are the steps i need to do?
Please suggest..
Thanks
prakash

Creating new Source system problem

Hi there,
System: BW 3.5 client 010, want to connect to R/3 4.6c Sandbox client 0101
we just refreshed our BW 3.5 sandbox with current production data. Now we want to create the source system via RSA1 to point to R/3 Sandbox. When we try to create this we get this new error. I am not sure why it is
Error:
Logical system BIX010 exists already
Message no. R3222
Diagnosis
The SAP Business Information Warehouse BIX010 is already connected to the source system. A multiple connection is not possible.
For some reason, it is reading as BIX010(talking to the system itself) - BW Sandbox systems, it should be doing the source system creation for SBX010 not BIX010 (talking to the system itself)
I tried to create the system manually and automatically, still no luck.
I cannot see SBX010 source system in teh RSA1, I am afraid it might be in the database table and not showing up in the transaction RSA1, does anyone know the table that it has this information, so I can se16 and look at the entries?
Does anyone knows where to look for?
Thanks in Advance
Kumar

Goto SM50 and check for ABAP connections. Look for SBX010. If you don'T find it here you have to create it. Check also BIX010 if it'S connected to the right system.
Regards,
Juergen

Source system problem - very urgent

Hi Friends
We used to use PRD250.We have changed the source system to ATH250.Every infosource has 2 tr rules.1 is for ATH250 and 1 is for PRD250.Now we are trying to delete the Tr rule for PRD250 datasource one.
But it's not allowing to delete.It's saying that
"There is no DataSource with these attributes".
I am trying to delete infosource and it's saying that
"InfoObject 0COMP_CODE of communication structure still being used"
How can i delete either Tr rules for PRD250 or infosource?
Your reply would be appreciated..
Regards,
Chandu.

Hi
The infosource not being used in any update rules and i have deleted data from ods and deleted update rules as well.
Thanks.
Regards,
Chandu.

Source System Problem after system refresh in RSA1 trx

Hi,
We have R/3 4.7 Test source system created in our SCM 2007 Test System. The source system check was OK.
The R3 Test system was refreshed with Production data few days back and now my source system is not working. When i perform Source System check it says:
BI unknown in source system
BI IDoc type ZSSB006 is not the same as source system IDoc type
I performed following steps in R3 Test system after its system refresh:
1. Created logcal system and created RFC.
2. Created port in trx we21.
3. Created partner profile in trx we20.
4. For the outbound parameter RSSEND, I had to create idoc type that should be same as in my SCM system i.e. ZSSB006.
5. Created idoc type using trx we30 as a copy of RSSEND and added entry in table EDIMSG. Now, i could also create outbound parameter RSSEND with idoc type ZSSB006.
After performing the above steps i also replicated the datasources for the R3 Test source system, but its still showing above error.
I also checked the RSBASIDOC table in SCM test system. It has correct entry for my source system. But there is no such entry in RSBASIDOC table in the R3 test system.
Someone pls help me.
Regards,
Chintan

Hi
Need to restore the All Dalaload connection settings after refresh the system which either R/3 or SCM.
RSA1 -> select the Source system -> Right click -> Restore , It'll ask the connecon paramters like RFC , method of activations. Then check the connection test of the Source system .
Check the the note for further info...
Note 886102 - System Landscape Copy for SAP BW and NW BI
Hope halp you...
Regards,
Sureshram

Source System Problem after System Refresh

Hi,
We have R/3 4.7 Test source system created in our SCM 2007 Test System. The source system check was OK.
The R3 Test system was refreshed with Production data few days back and now my source system is not working. When i perform Source System check it says:
BI unknown in source system
BI IDoc type ZSSB006 is not the same as source system IDoc type
I performed following steps in R3 Test system after its system refresh:
1. Created logcal system and created RFC.
2. Created port in trx we21.
3. Created partner profile in trx we20.
4. For the outbound parameter RSSEND, I had to create idoc type that should be same as in my SCM system i.e. ZSSB006.
5. Created idoc type using trx we30 as a copy of RSSEND and added entry in table EDIMSG. Now, i could also create outbound parameter RSSEND with idoc type ZSSB006.
After performing the above steps i also replicated the datasources for the R3 Test source system, but its still showing above error.
I also checked the RSBASIDOC table in SCM test system. It has correct entry for my source system. But there is no such entry in RSBASIDOC table in the R3 test system.
Someone pls help me.
Regards,
Chintan

Hi Chintan,
Can you please check IDOC in your Target system. It should be the same type. Better you do the Partner profile steps.
Also please check have correctly created the idoc in Inbound or Outbound.
Consider the case like if its exist in BW as Out bound then its connected to Inbound IDOC of R/3 and vice a versa.
Please elaborate your refresh activites. Normally IDOC setting never get changed in you refresh activites.
Just check your BW system patch level and search for Notes.
Regards,
Mahesh

Collection in source system error

Hi,
Recently we just performed a BW SP upgrade to 3.0B level 28. During our first extraction after upgrade on production for 0HR_PY_1 (Payroll Data) infosource, we encountered a message "Collection in source system ended".
Anybody has any clue about the cause and how to go about resolving it?
Thanks.
Best regards,
Taly

hi Taly,
datasource need to be replicated from source system (r/3) in production.
area to check -> in monitor request, menu 'environment' check job overview both bw(datawarehouse) and r/3(source system - equal to transaction sm37 - see if job cancelled and any helpful error message like sql error., from menu-environment check the same bw and r/3 for shortdump (st22), transaction rfc, ale management, system log(sm21) and so on, please let's know what's your finding there, possibly source system problem with that message, may ask basis for help. hope this helps.

Permission problem when create source system between BI and R/3

Hi All,
I want to create a source system between BI7 and R/3 system
Both RFC connections have been created and tested succefully on the 2 systems
But when i create the source system on BI I have the message :
"Changes to Repository or cross-client customizing are not permitted"
Any idea ?
Thanks in advance for answers
Sebastien

Hi All,
Thanks for your answer
The issue was solved when system is opened
Now my source system is created but I can't activate it !
When I try to activate I have 2 error messages in result :
RSAR 374 : The folowing errors occured in the source system
RSAR 375 : Result of the destination check: Timeout
There is no SAP help on these messages and for the moment I don't find thread about this on forum
Any idea ?

Problem Activating Source system RSAR 374, RSAR 375

Hi all,
Hoping you can help me with this issue. I have two
systems,one R/3 4.7 system and another BW 3.0B system.Both are recently installed. created user in client 800 on R/3. created user in client 100 on BW. i established RFC destination between both, Logical source system assignments and definitions of logical source systems on both. They are working correctly, But i couldnot succeed in creation of the source system. it gets created but it is not activated and ends with the following errors.
Message and the id next to it
1) The following errors occured in the source system. RSAR 374.
2) Result of the destination check: timeout . RSAR 375 .
when i try to activate it by right clicking on it , it does give these errors and activation gets terminated.
Can anyone pleaseeeeeeeeeeee with this. Thanks a lottttttt........
kishore karnati

Hi Kishore and Edwin,
I have exactly the same problem described here, except I am creating an ECC 6 source system in BI 7.
Therefore, I am wondering if you guys can elaborate on your experience.
I get the same error message RSAR 374 and RSAR 375.
I did both connection and authorization tests for the RFC in SM59 and it's OK.
What do you mean by the "basic concept of BWREMOTE AND ALEREMOTE background users."???
Please advise.
Cheers,
SJ

Source system mapping between BW systems

Hi All
I have question regarding source system mapping between BW systems
We are in BW7 and we still have BW3.5 objects (Cubes,IO,ODS ets)
We have 1 source in BW Dev that need to split to 2 different sources in BW QA
e.d BW Dev map to ECC Dev 110 and when we transport ,it should map
to 2 sources ,one is ECCQA Clinet 200 and another map to ECCQA Client 210
in the conversion in BW QA we have mapped it to the 2 ECC QA sources but
the problem is that if we would only work with BW7 objects this will work but since we have
also BW3.5 objects the mapping in not complete for the 3.5 objects , we also checked the 7.0 button in the conversion and it still have missing objects

Hi... i dont understand your isse you have one source of transport and in the destination if points to two systems and this works for you....and your problem is in 3.5 objects? its a version problem?
Regards

Moving DataSources between source systems

Hi Gurus,
I'm facing problems when trying to move a datasource between two source systems. Here are some details about the situation:
- I created a DataSource based on a DB-Connect source system (Oracle DB)
- I moved this DS to test system where it has been attached to the Oracle-Test-DB.
- Now I'd like to load data in SAP test system from the Oracle-Prod-DB. So I created a new source system in the SAP test environment pointing to Oracle-Prod-DB. Then I updated the conversion of logical systems now changing the source system to the Oracle-Prod-DB. After collecting the datasource and transporting it to SAP test system I noticed that the datasource already existed remained untouched and an additional datasource has been created.
So, can you Gurus share any piece of advice how to change a datasource from one source system to another.
Any help is appreciated.
Thanks in advance.
Heiko

Hi Srini,
Thank you for you´re answer.
I have checked WE20 and W21. The ports and the partner profiles are created automaticly in BW and R/3 sides, when creating the new source system in RSA1.
The main problem is, that the R/3 can´t send data to BW, although the ALE and RFC configurations are setup properly. After I replicated and activated several data sources in BW succesfully, I´m requesting data from the R/3 system with an infopackage, but after a few hours the follwing failure message occurs in the monitor :
Errors while sending packages from OLTP to BI
Diagnosis
No IDocs could be sent to BI using RFC.
System Response
There are IDocs in the source system ALE outbox that did not arrive in the ALE inbox of BI.
Further analysis:
Check the TRFC log.
You can access this log using the wizard or the menu path "Environment -> Transact. RFC -> In source system".
Error handling:
If the TRFC is incorrect, check whether the source system is fully connected to BI. In particular, check the authorizations of the background user in the source system.
In the TRFC (SM58) log in R/3 there appears an status text with the following entry:
"No service for system SAPABC client 123 in the integration directory".
For this entry I have found the SAPnote 940313. In this note,there is described how to send Idocs over Integration Server. Now I think that our R/3 system tries to send Idocs over the Integration server too.
But is there another alternative to send Idocs from R/3 to BW without using the Integration server?
Best regards
Mehmet

Moving datasource between source systems

Hi Gurus,
I'm facing problems when trying to move a datasource between two source systems. Here are some details about the situation:
- I created a DataSource based on a DB-Connect source system (Oracle DB)
- I moved this DS to test system where it has been attached to the Oracle-Test-DB.
- Now I'd like to load data in SAP test system from the Oracle-Prod-DB. So I created a new source system in the SAP test environment pointing to Oracle-Prod-DB. Then I updated the conversion of logical systems now changing the source system to the Oracle-Prod-DB. After collecting the datasource and transporting it to SAP test system I noticed that the datasource already existed remained untouched and an additional datasource has been created.
So, can you Gurus share any piece of advice how to change a datasource from one source system to another.
Any help is appreciated.
Thanks in advance.
Heiko

Hi Srini,
Thank you for you´re answer.
I have checked WE20 and W21. The ports and the partner profiles are created automaticly in BW and R/3 sides, when creating the new source system in RSA1.
The main problem is, that the R/3 can´t send data to BW, although the ALE and RFC configurations are setup properly. After I replicated and activated several data sources in BW succesfully, I´m requesting data from the R/3 system with an infopackage, but after a few hours the follwing failure message occurs in the monitor :
Errors while sending packages from OLTP to BI
Diagnosis
No IDocs could be sent to BI using RFC.
System Response
There are IDocs in the source system ALE outbox that did not arrive in the ALE inbox of BI.
Further analysis:
Check the TRFC log.
You can access this log using the wizard or the menu path "Environment -> Transact. RFC -> In source system".
Error handling:
If the TRFC is incorrect, check whether the source system is fully connected to BI. In particular, check the authorizations of the background user in the source system.
In the TRFC (SM58) log in R/3 there appears an status text with the following entry:
"No service for system SAPABC client 123 in the integration directory".
For this entry I have found the SAPnote 940313. In this note,there is described how to send Idocs over Integration Server. Now I think that our R/3 system tries to send Idocs over the Integration server too.
But is there another alternative to send Idocs from R/3 to BW without using the Integration server?
Best regards
Mehmet

Problems Delta Extractor after Homogeneous Source System Copy

Hi,
We have R/3 system landscape HUD, HUQ, HUP. And we have BW system landscape BWD and BWP.
We connect BWD to HUQ and BWP to HUP.
We made a homogeneous system copy from HUP to HUQ.
We haven´t made any homogeneous system copy from BWP to BWD.
We have applied the next OSS note after source system copy:
325525 Copying and renaming systems in a BW environment
184322 Procedure after DB copy of BW source system
184754 Procedure after BW database copy.
But we have problems in our BW Development (BWD), and we have the next Dump "MESSAGE_TYPE_X" when we can change any delta infopacket, the next text are from Dump:
"MESSAGE_TYPE_X" C
"SAPLRSS1 " or "LRSS1F11 "
"RSM1_CHECK_FOR_DELTAUPD"
I think that the problem is about inconsistencies between RSSDLINIT/SEL tables in BW side and ROOSPRMSC/F tables in R/3 side.
Please could you tell how can i solve this Dump, because i can restrart and initial and delta packet for different Datasource and i can´t do anything.
Thanks in advanced,

Hi,
We are upgrading our R/3 system from 4.7 to Ecc 6.
While copying database tables we are using Clinet Carrier tool which is considering only clinet dependent tables. Hence we are loosing our BW delta queue entries in RSA7 of ugraded system.
We found ROOSPRMSC and ROOSPRMSF tables and copying these 2 tables may resolve the issue and We copied and delta went fine.But we are not sure of only these are the tables to be considered.
Please let us know what are the relevent tables to be considered to make the Delta to work while copying Data base tables from one system to another.
Thanks in Advance
Regards,
R@ngzz

Problem restoring source system connection post BW system copy

Hi.
I am having problems restoring the R/3 connection in our BW system.
This is the scenario.
We need to move our BW production system onto a new system, but keep both BW connected to R/3 production for testing etc until cutover to our new BW system.
Basis performed a system copy and restore of BW production to the new system and ran BDLS.
When I try to restore the R/3 connection via RSA1 I am getting the following error at the end-
"A connection already exists there ......." and the message refers to our current/live BW system. The options are to delete the existing or not delete. I have only chosen "do not delete" and therefore the connection is not restored. My concern is that if I choose "delete" this will damage my existing connection between R/3 and the currently live BW system which is we cannot afford to do.
In our newly copied BW system we are using the existing R/3 SM59 (from system copy), and in R/3 we have created a new SM59 for our new BW system.
It seems from the error message information that is complains that BW sent R/3 some sort of ID (value = "WS") and that is already taken by the existing BW system. I tried to find where and what this WS value is referring to and the only thing I have found is that in table RSBASISIDOC "WS" is the suffix for transfer structure for that R/3 system. ??? Not sure if this is related for what.
Thanks for any help

Hi ,
Please check with basis or if you can ,then try to restore the source system in BI/BW.This should correct the inconsistencies between the two systems which is being caused by different Idoc types
Also check the table RSBASIDOC in the BI system and compare this to R/3 system ,the "basic type" field should be same.
A restore should work,it has always worked for me.
Regards
Amit

Source System between 2 systems : problem!

Similar Messages

Maybe you are looking for