Source System changes from SAP System to BI Warehouse on ECC activation

We are in the process of building a new development environment from an existing development environment.
After copying from system backup in the new development environment we performed BDLS to map to new source systems. At this point of time the source system for ECC ("SAP System from Release 3.0E" was changed to type "SAP Business Information Warehouse".
Why does this happen?
How can we prevent this?
Thanks for your help.

Hello.
Please check the following note if ti can be helpful to fix this issue.
1087980-ECC Source systems appearing in BI folder
Thanks,
Walter Oliveira,

Similar Messages

  • PING Process :: Checking App System availability from SAP R/3

    Hi
    Our requirement is to check Whether Application System is UP or DOWN before sending the data from SAP Server like Pinging the  application system from SAP System.
    We are using the Web Service as Target Application System & SAP R/3 as Source System now SAP R/3 will call one RFC ( like <i>Z_Ping</i> ) before calling any other RFC to send data to WebService. Following is the configuration -->
    <b>SAP R/3 -- Sender RFC Adapter -- SAP XI -- Rec SOAP Adapter -- App System ( Web Service )</b>
    Now can you tell me what is the appropraite way to do this, because in case of System Error ( in case when WebService is down  or Server on which WS is installed is down ) XI is not receving any exception payload so no mapping is happening.
    Though I created the " <u><i>Error</i></u> " xsd & used it as a Fault message but the mapping is not getting initiated.
    Can you tell me how I can achieve this & suggest me the design specification.
    Best Regards
    - Lalit -

    hey
    u can do this using alerts,configure alerts so that it gets triggered whenever anythin wrong happens with Z_ping.and if response is negative then dont send subsequent messages.
    alerts will always work irrespective of mapping.
    but one thing is that triggering/not-triggering the subsequent message will be manual coz u need to check the alert before u send messages
    thanx
    ahmad
    Message was edited by:
            Ahmad

  • Send IDOC from SAP system to IX but can't see any message in SXI_MONITOR

    Hi all,
    I have built up an XI system and configured an IDOC to IDOC scenario between two SAP Systems. After completed all configuration necessary:
    1. Configuration on Source Side (SAP System that send IDOC) and on Target Side (SAP System that receive IDOC) is OK.
    2. SLD is OK: Technical System and Business System are correct for these two SAP System.
    3. Integration Repository: all designed Object is OK.
    4. Integration Directory: all configuration is OK. "Test Configuration" Function is OK.
    5. Runtime WorkBench: is OK. "Test Message"  Function of "Integration Server" is OK.
    In general, it is all OK.
    But when i send an IDOC from SAP System Sour Side (Outbound IDOC from Source Side is OK), on the XI server i can't see any message in Tcode SXI_MONITOR. In this case, my XI server didn't receive any IDOC Message from  this Source Side, and so that my XI server can't process and exchange any IDOC sent from Source Side.
    Anyone can please help me to explain this problem: why my XI server can't receive any IDOC message from SAP System Source Side when all configuration is OK? Do anyone see the same case as this case?
    Thanks a lot for all in advance,
    Best regards,
    Vinh vo

    Hi,
    Possible checks
    At R/3 side
    1) Check in SMQ1 and SM58
    At XI Side
    1) Check in SMQ2 and IDX5
    Check this
    http://help.sap.com/saphelp_nw04/helpdata/en/6a/e6194119d8f323e10000000a155106/frameset.htm
    Regards
    Seshagiri

  • 'Error Occured in the Source System' for Non SAP system

    Hi Gurus,
    We have an Info Package which is getting the data from the Source System 'DOCP' and it has failed due to 'Error Occured in the Source System'.Since the source system is Non SAP system there is no option 'Replicate Data Sources'.So,First I activated the transfer rules by the program and ran the package again .But again the same error occured.
    Please suggest me how to proceed for this error for Non SAP Systems?

    Hi,
    Check the RFC connection in SM59 and reactivate the source system again.
    Hope this helps..
    Thank you,
    S R.

  • QRFC/TRFC for sending idocs from SAP system to XI

    Hi experts,
    The standard program RFFOEDI1 generates payment orders - first PEXR2002 and then EUPEXR idocs. These idocs are to be sent to the bank from SAP through XI. Bank partner profile is maintained. But these idocs because of TRFC are not getting sent in the order in which they are generated by the SAP system. So I changed the bank partner profile settings from TRFC to QRFC and gave the rule name as first 16 of mes type. But the idocs are struck in the SAP system. Is there any standard program to be run to send the idocs out from SAP system or is it automatic.
    Please suggest a standard method which is to be followed to send the idocs in the same order in which they are getting generated for the scenairo above.
    Regards,
    Asha

    Hi Asha,
    As you said Idocs are stucking,
    To send Idocs to XI, you must have maintain some settings in XI to receive Idocs. Once they are done properly .in R3 side standard way to send idocs to XI is Maintaining<b> <i>Change Pointers</i></b> and shedule the programe to trigger that most of Standard idocs will have standard programs to catch change pointers and send them to external system.
    and to maintain the same order of idocs there is a setting called Quality Of Service in XI side ,that option should be set to Exactly Once In Order .
    Regards,
    Ramesh.

  • How to copy a structure from one SAP system to other SAP system in ABAP

    Hi All,
      We have a requriement where need to copy an strcture of 250 feilds from on SAP system to other SAP system , do any one know how to do it .
    Regards
    Channu

    Channappa,
    It is really not hard to manually create the structure. Ctrl-Y copy from the source system screen and paste in the target system screen. You'll have to do this one page at a time. So, you will have to repeat it 9 times (or 18 times if you have to copy/paste component list and type separately).
    I can assure you that you can finish the task in less than 30 minutes.

  • User couldn't recieve the mail from SAP SYSTEM

    Hi all experts,
    User couldn't recieve the mail from SAP SYSTEM since the Unicode changes were pushed ,
    how to fix the issue ?
    Thanks & Best regards,
    Michael

    Hi Michael,
    Is the SAPConnect configured as per note [455140|https://service.sap.com/sap/support/notes/455140] ?
    Since you are talking about receiving emails, do you see the emails in SOIN transaction (or report RSBCSIN)? Have you tried telnet directly to the SAPConnect plugin as described on note [607108|https://service.sap.com/sap/support/notes/607108]
    What is the value of parameter is/SMTP/virt_host_<*>?
    Regards,
    Tiago

  • How to consume a web service provided by third party system from SAP system

    Hi Friends,
    Could any of you provide me a clear picture on how to consume a web service from SAP system and is provided by a third party system?
    Do we get an URL to create a client proxy for consuming the web service?
    Thanx in advance,
    Ram

    Hi Ram,
    of course you cannot supply the WSDL URL. Inside the WSDL (just view it in your browser) you find (usually but not necessary) towards the end something like
    <soap:address location="http://www.weather.gov/forecasts/xml/SOAP_server/ndfdXMLserver.php"/>
    which is the actual adress of the service.
    An example service can be found here:
    <a href="http://www.weather.gov/xml/">National Digital Forecast Database</a>
    containing the WSDL URL at
    <a href="http://www.weather.gov/forecasts/xml/DWMLgen/wsdl/ndfdXML.wsdl">this address</a>.
    You might also want to browse for the amazon webservices which allow you to embed queries against amazon into your application.
    have fun,
    anton

  • How to call an EXE file on a remote system from SAP system?

    Hi Friends,
    I want to execute an EXE file existing on the remote system from SAP system. Could some one give me an idea of how to execute that?
    Thanx in advance,
    Ram

    Hi Ram,
    Try this
    SXPG_COMMAND_EXECUTE
    Reward if this helps,
    Satish

  • Need of XI to send an XML from one SAP system to another SAP system

    Dear colleagues,
    I work in the SRM solution.
    In SRM there is a Purchaser and Supplier scenario called Supplier Self Services.
    The Purchaser creates a Purchase order and sends it to the supplier in form of an XML file.
    The purchaser system and supplier system are the same SAP system but different clients.
    Example: Purchaser client is 300 and Supplier client is 330 and both of them are on the same system.
    I have a very basic question.
    Currently we have the XI system which acts as an interface to send the Purchaser PO XML to the Supplier as XML.
    a)My question is in case the XML structure is identical across both the clients, then what is the need of XI system?
    b) Is it not possible to send XML from one client to another without an XI system? there si no need of any message mapping required since I am expecting the same XML structure in both clients.
    Please clarify the need of XI system in the following scenario. Is it not possible without XI?
    Many thanks.
    Best regards,
    Srivatsa

    Hi Srivatsa,
        YOu can send the XML message from one sap system to another sap system even without an XI system in between.
    But the use of SAP XI (Or any other middleware) is recommended because, it gives you the following advantages.
    1) Better monitoring and alerting mechanism. XI provides you robust set of tools that let you monitor the status of the messages that are exchanged.
    2) Direct communication between systems is referred to as Point to Point communication, which has its own disadvantages as against Hub and SPoke model (Message exchange using XI).
    3) Message delivery is guaranteed if you have XI in between.
    If the target system is down, the sender sap system will not try multiple times to post the message.
    But if you use XI, it can be configured to send the message multiple times, till it succeeds.
    Regards,
    Ravi Kanth Talagana

  • System copy from SAP R/3 47x110 with Oracle 10.2 to Oracle 11.2

    Hello,
    I want to do a system copy from SAP R/3 4.7 Enterprise 47x110 with Oracle 10.2 to a new machine with same SAP version but with oracle 11.2. (After this I will upgrade to ERP 6.0)
    I will do this with export/import but I don't find any documentation (manuals or notes).
    I only find this:
    Note 1499877 - Oracle 11.2 for R/3 Enterprise 4.7 Ext. Set 1.10
    but this note is only for a new installation, I don't know if this work with system copy
    Note 516246 - INST- System Copy for SAP Systems based on SAP Web AS 6.20
    This don't have information about oracle 11.2
    I read the manual "Homogeneous and Heterogeneous System Copy for SAP® Systems Based on SAP Web Application Server 6.20" but this also don't say nothing about oracle 11.2
    Can you help me? Where can I find this documentation and what DVDs (master and kernel) should I use?
    Best regards

    Hi Juan,
    Thanks for your answer.
    That is my doubt, what installation master shoud I use for export oracle 10.2 and import in oracle 11.2?
    Note "1499877 - Oracle 11.2 for R/3 Enterprise 4.7 Ext. Set 1.10" say that I can use installation master of R/3 4.7 Set 2 (47x200) to install a new system.
    I found this media:
    51033746_9 Installation Master 6.20/6.40 Linux on x86_64 64bit
    and
    51040087_7 NW 04 SR1 Inst. Mst. Linux x86_64 64bit f. Oracle 10.2/11.2
    I think this is the note that I need:
    Note 1478351 - Oracle 11g Support on UNIX: 6.40-Based SAP Systems

  • Download from SAP system to Excel sheet

    Hi,
    I have a list of materials, would like to download it from SAP system to an Excel sheet.
    Kindly let me to know the procdure to do it.
    Thanks
    NDS

    Hi,
    Please execute T code MM60 or the required T code to get the list of materials and Go to sap menu Bar ->setting->list->save->local to spreedsheet and save it your desk top to create an Excel file.
    Regards
    Ram

  • Extraction of InfoCube data from BW system to non SAP system

    Hello All,
    Is the extraction of InfoCube data from BW system to non SAP system availbale only for BW 3.5 release ? If yes, how can we extract the InfoCube data to a non SAP system with SAP BW 3.1 ?
    Hope to get some help.
    Best Regards,
    Loveline.

    Hi Gianfranco,
    Thanks for replying.
    Yes I know that open hub service is the appropriate technique to extract data from the infocube.
    But if we look at SAP Netweaver documentation : Prior to SAP NetWeaver '04(since the SAP BW release I am working is 3.1); We find that we have the option to extract to a DB table or flat file.
    Now if we look at SAP Netweaver documentation : SAP NetWeaver '04; In addition to the above we have the option to extract to a non SAP system.
    My requirment is to extract data from InfoCube to a non SAP system. The SAP BW release I am using is 3.1
    Best Regards,
    Loveline.

  • Copying Report Programs from one SAP system to another SAP system

    Folks,
    I would like to know if there is any easy way to copy a report program from one system to another system. There are two SAP systems of which one runs on UNIX and another one runs on Windows.  BASIS consultant told that they are not transportable.
    The only option I came up with manually copying the reports and associated Selection Texts, Text Symbols & Titles& Headers.
    Is there any other easy way to do this task as I have 60 programs to be moved. 
    - Balaji

    Thomas,
    There are two SAP systems of which one runs on UNIX and another one runs on Windows.
    Thanks for your suggestion. Our BASIS consultant mentioned that as the Operating Systems for these SAP systems are different , transports can not be done.  As per your suggestion , my understanding is that transports are possible even the operating systems are different.
    Please confirm.
    Regards,
    -Balaji

  • Transfer Data from SAP system to non-SAP system

    Hi all,
    I want to send material no, site and price data from SAP system to non-SAP system. Would you tell me how can I do it
    Thanks
    Arif
    Moderator message: please do more research before asking, show what you have done yourself when asking.
    Edited by: Thomas Zloch on Oct 16, 2011 10:38 PM

    Hi,
    you can create the same...
    but normal practice what we do is create swc for each system so that it is easy to maintain and easy to extend in the future..
    or else follow some conventions if you are just starting the things..
    HTH
    Rajesh

Maybe you are looking for