Source system creation IDoc error

Dear Experts,
While creating the source system I am getting this error "IDoc type ZSDD029 could not be found", if I ignore this error the system creates source system in BI folder instead of making it in SAP folder. I have created IDoc with this name and next time when I create new source system the IDoc type move to ZSDD030, and keep on adding it and gave me this error. Any Idea
Regards,
ray

Hello,
Can you try the following:
1) Tcode WE30: The type ZSDD029 must exist in BW system.
If it does not exist, create it as a copy of type RSSEND.
2) Afterwards, enter the following in the view maintenance of view
EDIMSG (tcode SM30):
Message type RSSEND, IdocType as specified above, Release
corresponding to the release you are currently using.
3) Please make sure your entries for RSBASIDOC are identical in BW.
Regards,
Shashank

Similar Messages

Error while source system creation/Source system transport

Hi,
     In our BW implementation, the system landscape is only 2 servers. One is BW Dev, another is BW Prd. All configurations are done in BW Dev and I extracted the data from QAS for this BW Dev system.
     Since we cant create the source systems in the BW Production system, I tried to create the source system for the SAP R3 Production system in BW Dev and trying to transport this to BW Production Instance.
     I have two queries.
1. Is this way is correct for creating the Source System for BW Production system?
2. When I tried to activate the source system I am getting the following error messages. (I tested the RFC Destinations. There is no problem, I also done the configurations for logical system creation and client assignment in both the systems).
Error in source system GWPCLNT900
     Message no. RSAR502
Diagnosis
     With Remote Function Call to system GWPCLNT900 error connection closed
     (no data) ccurred.
Procedure
     Remove the cause of the error.
When tried again I got the following error message
Basic type ZSBB030 doesnt exist. EA 447
Result of the destination check: Timeout RSAR 375.
Could anyone throw some light on these errors?
Thanks in advance.
Krishna

Hi,
you need to maintain the logical systems on both R/3 and BW. You also need to set up the RFC connection with users that can log in to the other system. The R/3 system must be open for customizing in scc4.
In transaction se03 the system change options for 'Business Information Warehouse: SAP Namespace' and 'Business Information Warehouse: Customer Namespace' may need to be modifiable. I am not completely sure about this.
The last thing I will mention is that I have seen source system creation fail when the RFC-users are system users, and the source system creation worked if the RFC-users was display user while creating the source system. The RFC-users must be changed back to system user later...
Please look at best practice documents on a more step-by-step guide...
Best regards,
Christian Frier

Source Sytem Creation giving error

Hi,
I am not able to create Source System in Quality System. there in Quality whenever i try making source system with the procedure in RSA1 right clicking in Source System type DB Connect, system asks for Source System name logical System name and other information. i provided all the info... Id and password..connection info... but in the end when i saved and came out of this window it gave a popup with 3 buttons System Log, Correct and cancel... with the message "Cannot Access Source System GRCDB". when i clicked on System Log button i can find these log:
1. After the attempt to call a database operation, the database system has
returned the error code specified in the message, which indicates that
the operation concerned could not be executed successfully.
2. Access to the database system has returned an SQL code indicating that
the operation could not be performed correctly by the database system.
This system log entry shows the database text for the SQL error that
has occurred. It supplements the preceding system log entry, which
shows the SQL code, the table name and the SQL function where the error
has occurred.
ORA-12154: TNS:could not resolve the connect identifier 44
If this problem of Source System creation is solved do i need to transport Source System? or please suggest some correct way of creating source system...
Also do we need any kind of authorizations for creation of Source System in Quality System... as i could create Source System in Quality but in the end it didnt created but the error message does not specify any authorization problem.

Hi
This can be done by simply creating source system in T-Code SCC4. You should have the authorization for this take BASIS Team help in the same.
http://help.sap.com/saphelp_nw70/helpdata/EN/80/1a618ae07211d2acb80000e829fbfe/frameset.htm
see 3.1 for creating source system
https://www.sdn.sap.com/irj/scn/wiki?path=/display/bi/step%252bby%252bstep%252bguide%252bsession%252bii---load%252bdata%252bto%252ban%252binfocube
https://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/library/uuid/c0751ba5-b7a8-2b10-6d97-e91e85c0fafa
Hope it helps and clear

Source system creation

hi experts,
this is the first time i am creating source system
i am have requirement to load data one bw system to another bi system,
so, to do that i defined and created logical system in bw for bi system and
i created same for bw in bi system also and everything is ok.
i guess my next step is to create source system(my self) for bw in bi .
when i am trying to create it is showing that it is already exists.and here what type of source system i need to choose. i am not founding any my self bw data mart
status symbol under source system creation node and what type of the source system i need to choose and whether it is manually or automatically.if i choose automatically it is asking create new destination ,create back ground user and connection of source system to bw (it is asking to fill all fields),for manual system creation only logical system and rfc destination. is it required to creat source system or not because my self bw data mart symbol is present in bw system and bi system also.please correct me if anything wrong
thanks
venu

hi chandra shekhar &chitrat,
thanks for your quick reply,when i choose sap business information symbol
it is asking to fill all the entries like crate new destination under this i provided
target computer in this i provided ip address of bi system( i am creating in bw system),system id & system number,and back groung user in source system and
password ,connection to the source system ,target system for back ground user
and connection to the source system what i need to provide
thanks
venu

Source System creation in BI 7.0 for SQL Server using DB Connect

Hi
My requirement is to extract data from SQL Server 2005 to BI 7.0 using DB Connect.
I need to create a SOURCE SYSTEM for that purpose,As i am new to BW i don't know how to start to create a SOURCE SYSTEM.
What are the parameters i require either from Basis team to install or for DB team User ID in SQL (What type of user).
Questions:
1) create a db user with authorization to read this views.......as i created views on tables...do i need authorisation to read table or views
"On BW Server side (If BW server isn't based on SQL Server):
(1) Install SQL Server client and test connection to SQL Server DB.
(2) Install DBSL of SQL server (download lib_dbsl_<num>.sar file from service market and sapcar to BW kernel)"
How can i know on which server our BW System is Based and HOW Install SQL Server client and test connection to SQL Server DB and
Install DBSL of SQL server (download lib_dbsl_<num>.sar file from service market and sapcar to BW kernel
and
how to create Source System to SQL Server on BW
Please update me in details i this is my first Source System Creation in BW
Thanks in advance

go through the link this may be helpful http://msdn.microsoft.com/en-us/library/dd299430.aspx

SOURCE SYSTEM CREATION IS NOT WORKING

Hi,
I have installed ECC 5.0 in my laptop, I am getting error while creating SOURCE SYSTEM. The error I am getting is :
<b>"No entry for BR_USER in table RSADMIN available"</b>
Pls help me to create a source system in BW.....
Thanks in Advance.
Sunil K Shetty

Hi
r/3 bw connectivity check these links and sap best practice for bw connectivity
http://help.sap.com/bp_biv135/BBLibrary/documentation/B84_BB_ConfigGuide_EN_DE.doc
Re: BW-R/3 Connectivity
Not able to create R/3 source system in BW
How to Create an R/3 source system and load data from there

With out source system creation we have transported all the flow

Hi all,
With out source system creation in Quality we have transported all the data flow
now is there any option to map the source system to transported flow.
Regards
Kiran Kumar

Hi,
you can reimport the same TR again once the mapping is done in BW from source system.
If you have left the TR's in the import queue of BW for later import then you can reimport it again.
This will go correctly.
In qualtiy to do the mappings you will need development authorization.
Thanks
Ajeet

R/3 Source system creation

Hello,
I wish to add an R/3 system to my BI 7.0 system. What exactly do I need to enter in the "Create SAP Source System" window? Should I leave backgrounduser as ALEREMOTE? I dont see any option of automatic source system creation. Could u pls help me with a step by step solution.
Thanks. POINTS WILL BE GIVEN.
SD

Hi
Defining the source system
As of release 640, you can use upper and lower case characters for R/3 user passwords. This is only uppercase characters for previous releases. Remember that your passwords are automatically converted to uppercase in previous Basis releases.
As BI 7.0 System has Basis 700 below, upper and lower case passwords are important.
So, for defining source system is almost same as ordinary BW Source System definitions.
One more important thing is that you have to take into account the EDI Ports. This may cancel your system definition if the <spsettings are not correct. This settings must be controlled on both BI and Source System.</p>
Here are the steps to configure Source System with Basis Relase lower than 640 in BI 70:
1. Take a look at table EDIPORT of your BW system and note the next free number for the field "Port". This is the adjacent number of the highest entry like 'A0000000123' for example. In this case e.g. take '124'.
2. Choose transaction "snum" and object "ediport".
Select "number ranges" from the menu "Goto" and here the button "status".
Change the CURRENT NUMBER of the ranges to the next free number you noted from table EDIPORT.
If the number range of your BW system is correct please check the same in your OLTP system.
3. Call TCODE RSA1 on BI System in BI Client.
4. Select Source Systems on Left Menu
5. Left Click SAP System and Choose Create
6. Important think is, as source system has Basis Release Lower than 640, You have to give All Passwords (For BI ALEREMOTE User and for Source System ALEREMOTE User) in UPPERCASE.
My Favourite is giving RFCCPIC for ALEREMOTE Passwords.
7. It Must Be OK.
Assign points if it helps
Regards,
Sumit

A question about item "type and release" of source system creation

Hello expert,
I have a question about item "type and release" of source system creation.
As we know,when we create a web servie source system,there will display a pop-up which includes three items as "logical system","source system"and "type and release".
About the item "type and release",when we push "F4" button,there will be three default selections as below:
"ORA 115     Oracle Applications 11i
TLF 205     Tealeaf 2.05B
XPD 020     SAP xPD".
Who can tell me when and how should I use the three selections.
And also I attempted to input the item by some optional letters except the default three selections and it seems that I can input it freely.
Thank you and Best Regards,
Maggie

Hello DMK,
Thank you very much for your answer.It is very helpful for me.
Can I ask you further about it?
I got that it is a semantic description item.
You said the default selections are set by our basis people.Would you like to tell me how should we creat a new value except the default ones for item "type and release"?Only by inputing the value in the item directly?But you see we canot see the new value item we created by ourself when we push "F4" button next time ,is that ok?Or do we have to ask basis people to define one new value item just like the default seletions before we use it.
Also if possible would you like to describe detail about "This becomes important when you are troubleshooting certain issues especially when RFC connection problems."
Thank you and Best Regards,
Maggie
Message was edited by: Maggie

R/3 source system creation error(Idoc is missing)

Hi expert's.
i have created an r/3 source system in BI 7. but it's showing error when i am activating it.
error as follows.
1. Basic type ZSMA087 does not exist     EA     447
2. Incorrect IDoc type ZSDF085 in the ALE definition of the source system     RSAR     373
for the above error 1 i checked in the RSBASIDOC table. it showing the idoc type. when i am checked with the source system that is r/3 system in the partner profile for logical system. it's showing the incorrect idoc type in RSSEND outbound parameters for that logical system
when i am changed that idoc type it's showing error as follows.
"entry RSSEND zsma087 does not exit in edimsg.
after that i checked with this table edimsg. for the rssend outbound option it's won't have the idoc type zsma087. table edit is also not possible on that.
so please help me to solve the issue.
regards
Harikrishna N

Hi Hari,
                Are you using ECC6.0 system or Bw(bi7.0) & R/3 source system
Regards,
Vijay.

Source System creation error

Hi..
I cannot create R/3(productive) source system at BW (development)
I checked password, cross-client and client specific are all changeble (t-code SCC4) and namespaces, sofeware are also modifiagle (t-code SE06) at R/3.
At BW, RFC connection is Ok (SM59) and R3 side, RFC also connected w/o problem.
But the error is still not resolved.
What I have to do now..

Hi Ravi..
Error massage is...
Massage No. RSAR502
Diagnosis
With Remote Function Call to system error Screen output without connection to user. ccurred.
and runtime error massage is (ST22)
DYNPRO_SEND_IN_BACKGROUND
Rita

Source System Activation - IDOC Type does not exist

I'm doing a new installation of BI7 and when I want to activate the source system on replicate Metadata Box and select "Only Activate" it comes up with error stating :Basic Type ZSxxxxx does not exist
When I look in SE16 on table RSBASIDOC I can see the IDOC Type exist on both BW and R/3 Systems
Any solution?

Check my reply
Re: "Basic Type Does Not Exist"

Source system (R/3) error while testing from BW

Hi,
We are trying to test the source system from BW. We have defined LOGICAL system in R/3 as well as in BW. We have also checked in sm59 for RFC tests and found to be successful in R/3 side as well as BW side. Bur when we tried to activate the R/3 source system in BW side,w e are getting the following errors. Please help urgently.
1.The following errors occured in source system - RSAR -374
2.Result of the destination check: Timed out - RSAR -375.
Thanks,
David

Have a look at this:
Problem Activating Source system RSAR 374, RSAR 375
Regards.

Source System Creation issue in BI

Hi Everyone,
I have already created RFC Connection in BW and EC(BackGround Users are ALEREMOTE and BWREMOTE). I am able to login using Remote Login from SM59 from BW to ECC and Vice versa. After this , When I try to create a Source System, it asks me to provide the ALEREMOTE and BWREMOTE Passwords along with the Source System Name.
I provide all the details.
Then the System asks me to login as a Administrator into ECC. And Once, I login, it throws up an error RFC Connection failed.
I think I am missing some steps.Please provide your inputs.
Regards,
Samir

Hi Ananda,
Thanks for your response. I did the same. Created Background users and when Try to Create a Source System ,it prompts me to R/3 side and here it is showing as RFC Failed. Remote Logon is working. But when Icreate a source System and provide password details, it fails.
Please advice.Is there any password restrictions for Background users.I maintained it as "init123". Do we need to use Capitals. And once, we provide the initial password, do we need to change it again somewhere?
Thanks and Regards,
Samir

Source system not available error

If the error message is teling as source system not available
so what can be the reasons for that and tell me the solution also.
data cllection is incorrect
so what can i do i have checked trfc connections every thing but every thing is fine
so any body help me out in this.
your suggstions will be rewarded.
Regards.
Vikram.

Hi Vikram,
Try the below mentioned steps:
1. Check the connections on BW sysetem and R/3 system.
Use the tcodes: sm58 and sm59. On the context menu of the source system created, check the option for conections. If connections are not fine, contact the basis team
2. Go to 'source systems' select you source system and right click and select 'Repicate Data Sources' , then try replicating the the infosource for that
appilication at the top node level as a whole, the try replicating the Data source
with in your infoarea..
Hope it would help ..if yes..assign points.
Regards,
Manu.

Source system creation IDoc error

Similar Messages

Maybe you are looking for