Source System Does Not Exist - Transport Problem

Hi
We have the next Landscape in BW 7.0 (Netweaver 2004's)
LRDCLNT300     is R3 DEV
LRQCLNT700     is R3 QA
LBDCLNT100     is BW DEV
LBQCLNT700     is BW QA
The connections are
LBDCLNT100 (BW Dev) use as source system        LRDCLNT300 (R3 Dev)
LBQCLNT700 (BW QA) use as source system        LRQCLNT700 (R3 QA)
In RSA1->TOOLS -> Conversion of Logical System Names
In Conversion of source system after the transport we have these entries
Source System                    Target System
LBDCLNT100 (BW Dev)         LBQCLNT700 (BW QA)
LRDCLNT300 (R3   Dev)         LRQCLNT700 (BW QA)
But when we transport an order from BW DEV to BW QA show the error "source system LRDCLNT300 does not exist"
Never made the conversion of source system after the transport.
Can you help us please.

Thanks Edwin
I create a RFC for LRDCLNT300 (R3 Dev) in my BW QA system (Target System).
I try an order again but it didn't work, also I try to check 7.0 checkbox but I got the message "No entry exists for original source system LBDCLNT100 for 3.x object"
and I have to uncheck again.
I still have the same problem the objects are associated to R3 Dev, never make the conversion to R3 QA.

Similar Messages

Transporting Process Chain - error Source system does not exist

Hi,
I tried to transport a local PC by itself (not including its main meta chain) since I have only done modifications in the local PC only. In the PC, there are PSA Processing, ODS Processing, ODS Activation, ABAP Program w/ variants and Infocube Rollup.
However, I got the following transport error: Source system does not exist
=======
Diagnosis
Source system is not known.
System Response
The imported data for DataSource was deleted again because the referenced source system does not exist and no mapping is defined in table RSLOGSYSMAP on an existing productive source system.
Procedure
Create the referenced source system in the Data Warehousing Workbench or define mapping to a known source system in table RSLOGSYSMAP.
You get to maintenance using Tools -> Conversion of the logical system names.
============
I have checked at the table RSLOGSYSMAP and all source system mappings are in order.
And the weird thing is, upon checking the PC itself in the transport-to box, I can activate it without any error.
FYI, we are currently upgrading to BI Accelerator. Am not sure if this could be one of the reasons.
Any inputs and tips are highly appreciated and will be rewarded with points accordingly.
Thanks

Hi,
This error is due to the fact that the
mapping table for the after import (RSLOGSYSMAP) is not correct maintained in PB7 system.
You need to maintain table RSLOGSYSMAP in each system
You can find the steps to do it in the attached note 127326:
o Maintain table 'RSLOGSYSMAP' in the target BW with view
   'V_RSLOGSYSMAP' and enter as 'original source system' the logical name of the source system in the source BW and as 'target source system' the logical name of the source system in the target BW.
   This maintenance is required since it allows the correct source system reference of the InfoSources to be transported.
This source system reference in turn is absolutely necessary to activate the transfer structure.
   Example:
   Source BW with source system AAA.
   Target BW with source system BBB where the source system AAA
   corresponds to the source system BBB.
   Entry in RSLOGSYSMAP in the target BW:
   Original source system: AAA, target source system: BBB.
   Give the DDIC user in the source BW in client 000 the
   authorization profile S_RS_ALL to create BW objects.
Cheers
Rajesh

Transport Request got failed due to Source system does not Exist

Dear All,
I Have collected All data soruces which are related to R3 data sources and Flat File data sources...
After import the transport request it got failed due to Flata file source system does not exist in BI quality system.
But all data sources related to R3 and R3 Source system has been moved which are available in BI Quality sytem also.
why Flat File source and data source are moving.. why i am not sure it was throuing error message called Source System does not exist..
Thanks,
Ven

Dear Venkat ,
Go to Quality system .
Use RSA1 Transaction --> go to Tools --> Manage Source System :
Here you can map the entry of system ..
Second : go to Development system under RSA1> Transport Connection and click on Source system button first --> select your source system ---you can select multiple entry also ..collect your data source ( with before and after option ) and deselect which object you do not need ..And select collection mode to automatically ...
use the transport button to create transport request and release from development system .
I hope you will not get error in Q system .
If still facing error , Please let me know.
Regards
Vikas Sharma
Robert Bosch
Edited by: Vikas Sharma-Bosch on May 5, 2011 5:34 PM

Source system restore - Source system does not exist

Hello friends,
We have a problem. Now we have a new test system QA2. From BW system source system connection was configured for older test source system QA1.
We needed to route this source system to new system. I tried with changing RFC of QA1 to QA2 details.
Now, when i check RSA1 source system Check for QA1, i get this error :
Port 'A000000103 ' of type 'ALE ' does not exist
No destination exists to source system QA1
I can see this source system in RSA1 in BW. However, in WE21 port is not available now.
Please suggest.
I do not have to lose transfer rules/PSA tables..etc.
thanks
ashish

I get this when i try to restor connection :
Source system does not exist
Message no. RSAR175
Diagnosis
You have specified that you want to restore source system QA2. This source system is not known in BI.
System Response
The source system is not restored.
Procedure
Recreate the source system.
If the source system should be known to BI, the name of source system QA2 may be incorrect. Rename the source system and try the function again.

Transport Error: Source system does not exist. Message no. RSAR203

Hi,
after transporting from BI_DEVELOP to BI_TEST I get an error whil importing Datasources:
Source system ERP_DEVELOP_SOURCESYSTEM does not exist - Message no. RSAR203
Which is upon the first sight correct, because I got the followings systems, RFC's and BI Sourcesystem:
ERP_DEVELOP -> BI_DEVELOP with RFC & Sourcesystem ERP_DEVELOP_SOURCESYSTEM pointing to ERP_DEVELOP
ERP_TEST -> BI_TEST with RFC & Sourcesystem ERP_TEST_SOURCESYSETM pointing to ERP_TEST
Can I map in the transport ( and how) in a way that the transports do not fail ?
ERP_DEVELOP_SOURCESYSTEM to ERP_TEST_SOURCESYSETM
or
Do I need to setup in BI_TEST a Sourcesystem ERP_DEVELOP_SOURCESYSTEM pointing to ERP_TEST ?
Thank You
Martin
Edited by: Martin Sautter on Jul 25, 2011 12:59 PM

Hi Martin,
You have to maintain the transport connection between your ERP_DEVELOP and ERP_TEST
your transport path should be as below
BI_DEVELOP -
> BI_TEST
ERP_DEVELOP -
> ERP_TEST
1)Make sure you have FRC connection between BI_DEVELOP and ERP_DEVELOP, BI_TEST and ERP_TEST
2)check you have transport connection between BI_DEVELOP and BI_TEST,ERP_DEVELOP and ERP_TEST
Now you transports should not fail
Hope this helps
Regards,
Venkatesh

After transporting I get error "source system does not exist"

Hello all,
I have transported my objetcs to BW quality system and transported the data sources to r/3 quality and everything went fine. But now when I am trying to go through everything my update rules are inactive and when I get to infosource it gives me this error
"Source system ERJ100 does not exist."
Is there any importamnt step that I am missing why are the objects not recognizing the source system?
Thanks,

hi,
check the system mapping in rsal tools system mapping tab as lilly mention. check if the mapping is defined correct. see the link below
https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/docs/library/uuid/e883de94-0501-0010-7d95-de5ffa503a86
https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/docs/library/uuid/3010ba90-0201-0010-2896-e58547c6757e
Might help
Thank you
Qandeel

Cannot make changes t oDTP - Source system does not exist

Hi,
I cannot open my DTP to make changes. when I tried to double click I got this error
Source system X01CLNT001 does not exist
Message no. RSAR203
I have tried connection test from SM59 and there seems to be no problem.
How do I resolve this?
thanks

Goto RSA1 --> Source System --> right click --> Check.
Is it giving any error?
You can click on restore also and check if anything improves.
Also check whether datasource and transformation is active.
Edited by: Pravender on May 28, 2010 12:11 PM

Source system does not exist (RSAR203)

Hi to all
I have a error in phase XPRA_EXECUTION in BI_CONT 704 add-on upgrade by SAINT transaction.
Start of the after-import method RS_DTPD_AFTER_IMPORT for object type(s) DTPD (Modo de entrega)
Source system CLNT100CED does not exist
Source system CLNT100CED does not exist
Source system CLNT100CED does not exist
Source system CLNT100CED does not exist
Errors occurred during post-handling RS_AFTER_IMPORT_D for DSFO L
The errors affect the following components:
BW-WHM (Warehouse Management)
I read the thread
XPRA_EXECUTION error in BI_CONT 703 patching
but don't work for me.
The sap Note 1271454 does not work for me becouse I already aply the SP.
SAP_ABA     701     0007     SAPKA70107     Cross-Application Component
SAP_BASIS     701     0007     SAPKB70107     SAP Basis Component
PI_BASIS     701     0007     SAPK-70107INPIBASIS     Basis Plug-In
SAP_BW     701     0007     SAPKW70107     SAP Business Warehouse
BI_CONT     703     0003     SAPKIBIIP3     Business Intelligence Content
I upgrede add-on BI_CONT to 704 SP 08, for this the SAINT aply patch SAPKIBIIO4 TO SAPKIBIIO9 (prerrequisite)
The error appear in SAPKIBIIP6
Any suggestions?
Many thanks and best regards
William Neira

Hi,
Had you checked the SAP Note " Note 955647 - BI_CONT 703:Information on Add-On Support Packages".
Seems like SAP has released two support pack
SAPKIBIIP6..........AOP      24.07.2007
SAPKIBIIP6 updated..AOP      07.08.2007........955647
and recommends to apply the Support pack released on 07.08.2007. Kindly check and update.
Regards
Valavan.SM

Transport issue - Source system does not exist

Hi at all!
I've got a problem after transport from BW QA-system (EBW) to BW PRD-system (PBW). All transports got the same error message, that the Source System DEV500 doesn't exist. But DEV500 is the development R/3 system. How could it be? Because we didn't connect the DEV500 to PBW. We connected PRDCLNT100 (Productive R/3) to PBW. Where is the failure?
Thanks in advance for your help.
Christof

Hi,
DEV R/3 -
> QA R/3 -
> PROD R/3
DEV BIW -
> QA BIW -
> PROD BIW
Is the above one is your landscape? If so , you must had created the Transport requests in DEV BIW and imported them into QA BIW. And for that you had maintained the source system conversions in QA ABIW .
Now you want to import into PROD BIW. And remember that the orgin(source) of the trnasport requests is DEV BIW. So you need to maintain the Conversions in PROD BIW for conversion from DEV R/3 to PROD R/3.
With rgds,
Anilk Kumar Sharma. P

Source system does not exist

Hi all,
When i run an infopackage its getting failed throwing out an error
"An error occurred in the source system.
System Response
Caller 09 contains an error message."
I have replicated the Data source and when i try activating it i am getting the following errors
"Inconsistent user object XXXXXXX "
"Error saving DataSource "
"DataSource XXXXX could not be activated"
Help me out
Regards,
MADhu

Hi,
Might be some issue in Data Source when you replicating it in BW system.
Check RFC connections between the Source and Target.
Could you mention the error message clearly.
Reg
Pra

Data source 80BP_ID does not exists in source system

Hi All,
I have just started with standard content for SD module.
I activated my datasources 2lis_11_vaitm and 2lis_12_vcitm in my R3 system.
After replicating these data sources in my BI system i went to BI Content to activate my Info sources.
While installing info sources 2lis_11_vaitm and 2lis_12_vcitm i got errors namely
Data source 80BP_ID does not exists in source system
Datasource 80BP_REL not maintained.
Can somebody pls suggest a way out.
Thanks in advance..
Regards,
Rohit

Hi Rohit,
When ever you try to install the SD related Standard business content then it will automatically pick up the CRM related data. the 0BP_ID, these are related to the CRM.
Please uncheck the unrelated objects while installing the STD content.
you can select the option in the grouping as ONLY NECESSARY OBJECTS.
Regards,
Ravi Kanth

Source symbol does not exist

Hi!
when I am creating purchase order, system is giving error message source sumbol does not exist, and when I click on Proceed, system is taking to OT05.
But OT05, all the source symbols have been defined.
Planning levels has been maitnained in vendor/customer masters/GL accounts.
Planning level and source have been maintained.
Planning level is assigned to planning groups.
Define planning levels for Logistics.
can any one explain what could be the problem.
regs,
ramesh b

Dear Ramesh,
I am also facing similar issue while saving purchase order.
While saving purchase order getting error as 'Source symbol does not exist'.
If you have solution can you please share it with me.
Regards
Suresh Naidu

Source locator does not exist: com.adobe.flexbuilder.debug.sourceLookupDirector.flash

I'm using FB4 under OSX and for the longest time it refused to load and just displayed errors instead of panes. Nothing that I could find would fix it (including reinstalling). Well, it looks like that problem has been resolved in some update, because it has gone away, and I can go back to viewing projects.
The problem is now when I try to build the project I get the error:
Source locator does not exist: com.adobe.flexbuilder.debug.sourceLookupDirector.flash
Any ideas? My familiarity of eclipse is pretty limited and I don't know what a source locator is. TIA.

Hi,
Looks like those classes are missing from your Flash Builder installation.
Can you check in installdir/plugins/com.adobe.flexbuilder.debug.xxx/com/adobe/flexbuilder/debug/
If those files are missing, do a complete uninstall and then install.

User SYSTEM does not exist

Hi there,
Using the MDK:
-I have set up my publication items
-added them to my publication
-used the packaging wizard to setup my application and attach it to the publication
-used the Oracle Mobile administrator to create a user.
-used the Oracle Mobile administrator to assign the user to the application.
On Win32, I download the WIN32 Setup and run it with the user and password.
It sets up the DMAgent, etc, and installs all of the oracle lite stuff into c:\mobileclient
Next, I run MSYNC.EXE with the user's name. It completes successfully. What happens next is very strange:
C:\Documents and Settings\allen>msql system/moogle@polite:tenchi_pman
Oracle Lite MSQL Version 10.3.0.1.0
Copyright (c) 1997, 2007, Oracle. All rights reserved.
[POL-5246] user SYSTEM does not exist
C:\Documents and Settings\allen>
Has anyone encountered this?
Thanks,
Allen
p.s. my environment details are as follows:
Mobile Repository Configuration
Operating System: Linux 2.6
Oracle Database: 10.2.0.3.0
Mobile Server Configuration (all the latest patches applied at this time)
Mobile Server Install Type: Standalone
Operating System: Microsoft Windows XP
Mobile Server: 10.3.0.1.0
Secure Socket Layer: No
Part of Web Farm: No
Java J2SE: 1.5.0_15
Mobile Client Configuration
Mobile Client Type: Windows 32
Operating System: Microsoft Windows XP SP2
Mobile Client: 10.3.0.1.0

Is there a way for me to create the SYSTEM user in the Oracle Lite database, or is this error a symptom of a different problem?
Tid=0f34, Statement Text:CREATE VIEW SYSTEM.CAT (TABLE_NAME, TABLE_TYPE) AS SELECT TABLE_NAME, TABLE_TYPE FROM SYSTEM."okClass" WHERE TABLE_TYPE IN ('TABLE', 'VIEW')
Tid=0f34, Statement Text:CREATE VIEW SYSTEM.ALL_CONSTRAINTS (OWNER, CONSTRAINT_NAME, CONSTRAINT_TYPE, TABLE_NAME, SEARCH_CONDITION, R_OWNER, R_CONSTRAINT_NAME, DELETE_RULE, STATUS, VALIDATED) AS SELECT OWNER, CONSTRAINT_NAME, CONSTRAINT_TYPE, TABLE_NAME, SEARCH_CONDITION, R_OWNER, R_CONSTRAINT_NAME, DELETE_RULE, STATUS, VALIDATED FROM SYSTEM.POL__CONS
Tid=0f34, Statement Text:CREATE VIEW SYSTEM.ALL_CONS_COLUMNS ( OWNER, CONSTRAINT_NAME, TABLE_NAME, COLUMN_NAME, POSITION) AS SELECT OWNER, CONSTRAINT_NAME, TABLE_NAME, COLUMN_NAME, POSITION FROM SYSTEM.POL__COLUSAGE
Tid=0f34, Statement Text:CREATE VIEW SYSTEM.TABLE_PRIVILEGES ( OWNER, TABLE_NAME, GRANTOR, GRANTEE, GRANT_TYPE, GRANTABLE) AS SELECT OWNER, TABLE_NAME, GRANTOR, GRANTEE, GRANT_TYPE, GRANTABLE FROM SYSTEM.ALL_PRIVILEGES WHERE OBJECT_TYPE = 0
Tid=0f34, Statement Text:CREATE VIEW SYSTEM.COLUMN_PRIVILEGES ( OWNER, TABLE_NAME, COLUMN_NAME, GRANTOR, GRANTEE, GRANT_TYPE, GRANTABLE) AS SELECT OWNER, TABLE_NAME, COLUMN_NAME, GRANTOR, GRANTEE, GRANT_TYPE, GRANTABLE FROM SYSTEM.ALL_PRIVILEGES WHERE OBJECT_TYPE = 5
Tid=0f34, Statement Text:CREATE VIEW SYSTEM.ALL_VIEWS ( OWNER, VIEW_NAME, TEXT_LENGTH, TEXT) AS SELECT TABLE_SCH, TABLE_NAME, VIEW_LEN, VIEW_TEXT FROM SYSTEM."okClass" WHERE TABLE_TYPE IN ('VIEW')
Tid=0f34, Statement Text:CREATE VIEW SYSTEM.ALL_TABLES ( OWNER, TABLE_NAME, TABLESPACE_NAME, CLUSTER_NAME, PCT_FREE, PCT_USED, INI_TRANS, MAX_TRANS, INITIAL_EXTENT, NEXT_EXTENT, MIN_EXTENTS, MAX_EXTENTS, PCT_INCREASE, BACKED_UP, NUM_ROWS, BLOCKS, EMPTY_BLOCKS, AVG_SPACE, CHAIN_CNT, AVG_ROW_LEN) AS SELECT TABLE_SCH, TABLE_NAME, CAST('OOT' AS VARCHAR(128)), CAST(NULL AS VARCHAR(128)), CAST(0 AS INTEGER), CAST(0 AS INTEGER), CAST(0 AS INTEGER), CAST(0 AS INTEGER), CAST(NULL AS INTEGER), CAST(NULL AS INTEGER), CAST(NULL AS INTEGER), CAST(NULL AS INTEGER), CAST(NULL AS INTEGER), CAST(NULL AS VARCHAR(1)), CAST(NULL AS INTEGER), CAST(NULL AS INTEGER), CAST(NULL AS INTEGER), CAST(NULL AS INTEGER), CAST(NULL AS INTEGER), CAST(NULL AS INTEGER) FROM SYSTEM."okClass" WHERE TABLE_TYPE IN ('TABLE')
Tid=0f34, Statement Text:CREATE VIEW SYSTEM.ALL_TAB_COLUMNS ( OWNER, TABLE_NAME, COLUMN_NAME, DATA_TYPE, DATA_LENGTH, DATA_PRECISION, DATA_SCALE, NULLABLE, COLUMN_ID, DEFAULT_LENGTH, DATA_DEFAULT, NUM_DISTINCT, LOW_VALUE, HIGH_VALUE, IS_HIDDEN) AS SELECT COLUMN_SCH, TABLE_NAME, COLUMN_NAME, CASE TYPE_CODE WHEN -16 THEN 'NCLOB' WHEN -15 THEN 'CLOB' WHEN -14 THEN 'BLOB' WHEN -13 THEN CAST('LONG' AS VARCHAR(30)) WHEN -12 THEN 'NUMBER' WHEN -11 THEN 'ROWID' WHEN -10 THEN 'LONG RAW' WHEN -9 THEN 'RAW' WHEN -8 THEN 'TINYINT' WHEN -7 THEN 'LONG VARBINARY' WHEN -6 THEN 'VARBINARY' WHEN -5 THEN 'BINARY' WHEN -4 THEN 'BIGINT' WHEN -3 THEN 'LONG VARCHAR' WHEN -2 THEN 'REF' WHEN -1 THEN 'UNKNOWN' WHEN 1 THEN 'CHAR' WHEN 2 THEN 'NUMERIC' WHEN 3 THEN 'DECIMAL' WHEN 4 THEN 'INTEGER' WHEN 5 THEN 'SMALLINT' WHEN 6 THEN 'FLOAT' WHEN 7 THEN 'REAL' WHEN 8 THEN 'DOUBLE' WHEN 9 THEN CASE SUBTYPE_CODE WHEN 1 THEN CAST('DATE' AS VARCHAR(9)) WHEN 2 THEN 'TIME' WHEN 4 THEN 'TIMESTAMP' ELSE 'EMPTY' END WHEN 10 THEN 'INTERVAL' WHEN 12 THEN 'VARCHAR' WHEN 13 THEN 'VARCHAR2' WHEN 14 THEN 'BIT' ELSE 'EMPTY' END, CASE WHEN TYPE_CODE <> 9 THEN COL_PRECISION WHEN TYPE_CODE = 9 AND SUBTYPE_CODE = 1 THEN 8 WHEN TYPE_CODE = 9 AND SUBTYPE_CODE = 2 THEN 6 WHEN TYPE_CODE = 9 AND SUBTYPE_CODE = 4 THEN 15 ELSE CAST(NULL AS INTEGER) END, CASE WHEN TYPE_CODE NOT IN (-16, -15, -14, -13, -11, -10, -9, -7, -6, -5, -3, 1, 9, 12, 13) THEN COL_PRECISION ELSE CAST(NULL AS INTEGER) END, CASE WHEN TYPE_CODE IN (-12, 2, 3, 4, 5, 10) THEN COL_SCALE ELSE CAST(NULL AS INTEGER) END, CASE NULLABILITY WHEN 0 THEN CAST('N' AS VARCHAR(1)) ELSE 'Y' END, POSITION, CASE DEFAULT_LENGTH WHEN 0 THEN CAST(NULL AS INTEGER) ELSE DEFAULT_LENGTH END, CASE DEFAULT_LENGTH WHEN 0 THEN CAST(NULL AS VARCHAR(4096)) ELSE DATA_DEFAULT END, CAST(NULL AS INTEGER), CAST(NULL AS INTEGER), CAST(NULL AS INTEGER), CASE ISHIDDEN WHEN 0 THEN CAST('N' AS VARCHAR(1)) ELSE 'Y' END FROM SYSTEM."okAttr" WHERE TABLE_TYPE IN ('TABLE', 'VIEW')
Tid=0f34, Statement Text:CREATE VIEW SYSTEM.USER_OBJECTS ( OWNER, OBJECT_NAME, OBJECT_ID, OBJECT_TYPE, CREATED, LAST_DDL_TIME, CREATED_TIME, STATUS) AS SELECT SCHEMA_NAME, OBJECT_NAME, OBJECT_ID, CASE OBJECT_TYPE WHEN 0 THEN CAST('TABLE' AS VARCHAR(128)) WHEN 1 THEN 'VIEW' WHEN 2 THEN 'INDEX' WHEN 3 THEN 'SEQUENCE' ELSE 'SYNONYM' END, CAST(CREATED AS DATE), CAST(CREATED AS DATE), CAST(CAST(CREATED AS TIMESTAMP(0)) AS VARCHAR(128)), CAST('VALID' AS VARCHAR(128)) FROM SYSTEM.POL__ALLOBJ WHERE OBJECT_NAME NOT LIKE 'POL_%' AND SCHEMA_NAME IN (SELECT NAME FROM POL__SCHEMATA WHERE OWNER = USER)
Tid=0f34, Statement Text:CREATE VIEW SYSTEM.ALL_USERS ( USERNAME, USER_ID, CREATED) AS SELECT USERNAME, USER_ID, CREATED FROM SYSTEM.POL__USERS
Tid=0f34, Statement Text:CREATE VIEW SYSTEM.ALL_OBJECTS ( OWNER, OBJECT_NAME, OBJECT_TYPE, CREATED, STATUS) AS SELECT SCHEMA_NAME, OBJECT_NAME, CASE OBJECT_TYPE WHEN 0 THEN CAST('TABLE' AS VARCHAR(128)) WHEN 1 THEN 'VIEW' WHEN 2 THEN 'INDEX' WHEN 3 THEN 'SEQUENCE' ELSE 'SYNONYM' END, CAST(CREATED AS DATE), CAST('VALID' AS VARCHAR(128)) FROM SYSTEM.POL__ALLOBJ
Tid=0f34, Statement Text:CREATE VIEW SYSTEM.ACCESSIBLE_COLUMNS ( OWNER, TABLE_NAME, COLUMN_NAME, DATA_TYPE, DATA_LENGTH, DATA_PRECISION, DATA_SCALE, NULLABLE, COLUMN_ID, DEFAULT_LENGTH, DATA_DEFAULT, NUM_DISTINCT, LOW_VALUE, HIGH_VALUE) AS SELECT COLUMN_SCH, TABLE_NAME, COLUMN_NAME, CASE TYPE_CODE WHEN -4 THEN CAST('BIGINT' AS VARCHAR(128)) WHEN -3 THEN 'LONGVARCHAR' WHEN -2 THEN 'REF' WHEN -1 THEN 'UNKNOWN' WHEN 1 THEN 'CHAR' WHEN 2 THEN 'NUMERIC' WHEN 3 THEN 'DECIMAL' WHEN 4 THEN 'INTEGER' WHEN 5 THEN 'SMALLINT' WHEN 6 THEN 'FLOAT' WHEN 7 THEN 'REAL' WHEN 8 THEN 'DOUBLE' WHEN 9 THEN 'DATETIME' WHEN 10 THEN 'INTERVAL' WHEN 11 THEN 'VARCHAR' ELSE 'EMPTY' END, CASE WHEN TYPE_CODE IN (-3, 1, 11) THEN COL_PRECISION ELSE CAST(NULL AS INTEGER) END, CASE WHEN TYPE_CODE NOT IN (-3, 1, 11) THEN COL_PRECISION ELSE CAST(NULL AS INTEGER) END, CASE WHEN TYPE_CODE IN (2, 3, 4, 5, 9, 10) THEN COL_SCALE ELSE CAST(NULL AS INTEGER) END, CASE NULLABILITY WHEN 0 THEN CAST('N' AS VARCHAR(1)) ELSE 'Y' END, POSITION, CAST(NULL AS INTEGER), CAST(NULL AS INTEGER), CAST(NULL AS INTEGER), CAST(NULL AS INTEGER), CAST(NULL AS INTEGER) FROM SYSTEM."okAttr" WHERE TABLE_TYPE IN ('TABLE', 'VIEW')
Tid=0f34, Statement Text:CREATE VIEW SYSTEM.ALL_INDEXES ( OWNER, INDEX_NAME, TABLE_OWNER, TABLE_NAME, TABLE_TYPE, UNIQUENESS) AS SELECT SCHEMA_NAME, INDEX_NAME, TABLE_SCHEMA, TABLE_NAME, CAST('TABLE' AS VARCHAR(10)), IS_UNIQUE FROM SYSTEM.POL__INDICES
Tid=0f34, Statement Text:CREATE VIEW SYSTEM.ALL_IND_COLUMNS ( INDEX_OWNER, INDEX_NAME, TABLE_OWNER, TABLE_NAME, COLUMN_NAME, COLUMN_POSITION) AS SELECT SCHEMA_NAME, INDEX_NAME, TABLE_SCHEMA, TABLE_NAME, COLUMN_NAME, INDEX_POSITION FROM SYSTEM.POL__INDICESDT
Tid=0f34, Statement Text:CREATE VIEW SYSTEM.ALL_COL_COMMENTS ( OWNER, TABLE_NAME, COLUMN_NAME, COMMENTS) AS SELECT COLUMN_SCH, TABLE_NAME, COLUMN_NAME, COLUMN_COMMENT FROM SYSTEM."okAttr" WHERE COLUMN_COMMENT IS NOT NULL
Tid=0f34, Statement Text:CREATE VIEW SYSTEM.ALL_TAB_COMMENTS ( OWNER, TABLE_NAME, TABLE_TYPE, COMMENTS) AS SELECT TABLE_SCH, TABLE_NAME, TABLE_TYPE, TABLE_COMMENT FROM SYSTEM."okClass" WHERE TABLE_COMMENT IS NOT NULL
Tid=0f34, Statement Text:CREATE VIEW SYSTEM.ALL_SYNONYMS ( OWNER, SYNONYM_NAME, TABLE_OWNER, TABLE_NAME, DB_LINK) AS SELECT OWNER, SYNONYM_NAME, TABLE_OWNER, TABLE_NAME, CAST('NULL' AS VARCHAR(128)) FROM SYSTEM.POL__SYNONYM
Tid=0f34, Statement Text:CREATE VIEW SYSTEM.ALL_SEQUENCES ( SEQUENCE_OWNER, SEQUENCE_NAME, MIN_VALUE, MAX_VALUE, INCREMENT_BY) AS SELECT SCHEMA_NAME, SEQ_NAME, MIN_VALUE, MAX_VALUE, INC_BY FROM SYSTEM.POL__SEQ WHERE SEQ_NAME NOT LIKE 'POL_%'
Tid=0f34, Statement Text:CREATE VIEW SYSTEM.DATABASE_PARAMETERS AS SELECT PARAMETER, VALUE FROM SYSTEM.POL__DATABASE_PARAMETERS
Does anything look amiss with this oldb_trc.txt file?
Allen

Form SYSTEM does not exist "Message no. TD 705"

Hello all,
When I go to transaction FB03 for any document. Drill down on a line item. Click on pencil to change the line item. Click on long text button. Click on the editor icon. Message received "Form SYSTEM does not exist". The display is in SAPscript editor. I am unable to change to the Word editor using menu Goto > Change Editor. Message "Form SYSTEM does not exist" appears as the message.
Any idea what the message "form system does not exist" and how can this be corrected?
Thanks

Hi,
You encounter this problem because a the editor form needed is not available.
Speak with your ABAPer who can help you in the same.
Please also check if the form is activated.
Caio
Raghu

Source System Does Not Exist - Transport Problem

Similar Messages

Maybe you are looking for