Source System Error for 0Material_Attr

Hi Gurus,
I have New BI System, when i m loading 0Material_Attr, the whole data is coming but with the status Red. May b the error is with source system. I checked in PSA maintenance and the error detail in source system is mentioned below.
"Value 'A3000014500L ' for characteristic 0MATERIAL is in external format"
"0MATERIAL : Data record 1 ('A3000014500L '): Version 'A3000014500L ' is not valid RSDMD 194".
for detail error check the link below
https://docs.google.com/document/d/1v4uHeg6Ci29zv0qJ21dOH7gttuQyg_VZsLM2IMfZEuM/edit?hl=en&authkey=CLnd8P4H
can anybody help in this regard.
Thanks in advance.
Regards
Manna Das

Hello Manna Das,
0Material has conversion Exit MANT1 which converts the Material in the external format to internal format of the system.
Can you please check if the Converison exit is there?
Thanks,
Sarat

Similar Messages

RFC system error for destination GTADIR_SERVER

I just installed trial version 7.0 ABAP SP12. I started the learning path displayed in SE80, create a table and some class for working with it.
When trying to create a data-element I get the error "RFC system error for destination GTADIR_SERVER". Any hints about what this server is and how to set it up?

This message is not supposed to appear for customers, but it doesn't cause any harm either. You can click through and ignore it.
The message is removed for customers in SP13. Check OSS Note 1063482.

"RFC system error for destination GTADIR_SERVER",why?

RFC system error for destination GTADIR_SERVER
Hi AlL,
We are working in CRM 6.0.
While creating the Components and Views,i am encounter this Error.
<<
"RFC system error for destination GTADIR_SERVER"
Message no. SGSUB104
Diagnosis
Access to destination GTADIR_SERVER is currently not possible.
System Response
There was a problem with the execution of the function through a Remote Function Call (error in commmunication or communication setup).
The entered destination was GTADIR_SERVER.
The RFC error message reads:
RFC destination GTADIR_SERVER does not exist.
Die Aktion wurde deshalb abgebrochen.
Procedure
Wiederholen Sie die Aktion sp鋞er.
Wenn die Destination GTADIR_SERVER 黚er einen l鋘geren Zeitraum hinweg nicht erreichbar ist, dann verst鋘digen Sie die Systemadministration f黵 GTADIR_SERVER.
Procedure for System Administration
Weitere Informationen - siehe Systemprotokoll in Destination GTADIR_SERVER.
>>
Any ideas?
Thanks & Regards
Edited by: Autumn of Desert on Oct 12, 2009 8:33 AM

Cancelled

Delete Source System Assignment for a DataMart Infosource in BW3.0B

Hello Experts:
Can one of you assist me with how to delete source system assignment for a system generated infosource(ie., Infosource existing under data Mart). i noticed that in case of an Info Cube, system provides an option to delete the source system assignment but not for an ODS.
I am trying to delete the system data source 8* that has been assigned to the data mart info source 8* and reassign the data source to my custom info source.
Any ideas would be highly appreciated.
BTW, we are on BW3.0B
Thanks,
Ragavan

Hi,
Go into the infosource with change mode. Open the transfer Rule/transfer structure and hit the delete button. It'll ask for delete datasource assignment. That would delete the source system assignment.
Cheers,
Kedar

Transport of Source System assignment for a Virtual Cube

Built a transport with the datasources, transfer rules, cubes etc..
After transport to my Q system - in the Q system I am not seeing any source system assignment for my remote cube
OBviously it exists in Dev
Everythign else is fine - datasource, infosource trasnfer rules but nothing underneath the infocube where the source system normally is
transport before and after in the transport conenctor picks up nothing to be transported
Logical system mapping table in Q is fine (naturally - because the datasouces got there) - replicate all done
Any ideas?

hi Simon,
check sap help
http://help.sap.com/saphelp_nw04/helpdata/en/3b/63c620e18411d4b2d90050da4c74dc/frameset.htm
The source system assignments are local to the system and are not transported.
hope this helps.

Transporting 0material_attr gives reference source system error...

Hi Experts,
I know its not recommended but for some reasons we were trying to move 0material_attr data source and transfer rules and transfer structure 0material_attr_ba from quality system (QAS) to Development system. And every time we are getting the error "Source system QAS does not exist" while importing the request in DEV.
The reason for this error is that it is still keeping the reference source system of quality as QAS which is not there as logical system in DEV. My question is isn't it should automatically refer to R/3 DEV when imported to development system.
Thanks
Vishal

Hi,
As pointed out by Joke in the previous post, you need to maintain the mapping of logical system name for transportation.
In Dev, go to RSA1> Tools--> Conversion of logical system names.
Here create new entries.
Your Original Source System would be the QAS Logical System Name & Target Source System would be DEV Logical System Name.
Once entry is saved, re-import the transport request and check.
Hope this helps!

Source system error - RFC connection failed

Hi Gurus,
I have installed ECC6 on my PC but not when i am trying to created the DS its not allowing me its saying appl comp hierarchy for source susyem "T90*" doesnt not exist.
so tried going to source system -> done a check for my source system then i got the following errors
Source system "T90*" is inactive
Entry in outbound table not found
Entry in inbound table not found
Basic type does not exist
Check failed for RFC connection T90CLNT090 ; check destination
can any one tell me how to fix this issue?
Regards,
Ravi

Hi Ravi,
Did you run appication component hierarchy in source system(TX-RSA9)
then activate your data source
then replicate in BW system.
Check here for BW connectivity with source system.
https://www.sdn.sap.com/irj/scn/wiki?path=/display/bi/stepbyStepBusinessIntelligence
Thanks,
Vijay.

Source System Error While transporting

Hi SDN,
We are transporting requests to a deployment test box SN1 and we are getting this error message while we never got this error message transporting to QAS and in QAS we did not need to create DEV010 as a source system - setting up RFC connection was sufficient.
Any thoughts?
===========================================================
Source system DEV010 does not exist
Message no. RSAR409
Diagnosis
Source system DEV010 is not known.
System response
The imported data for data source 8ZM_C42 was deleted again as the referenced source system does not exist and no mapping is defined in table RSLOGSYSMAP to an available productive source system.
Procedure
Create the referenced source system in the Administrator Workbench or define a mapping to a known source system in table RSLOGSYSMAP.
You get to the maintenance using Tools -> Conversion of the logical system names.

Speak to your basis team and ask them to make entries in table:
RSLOGSYSMAP .
Are you trying to transport info source or any source system dependt object? If so, this error is understandable.
This has been discussed several times and pl search the forum.
Ravi Thothadri

Create Source System - Error

Hi Gurus,
I have to create a conexion with R3 so i did :
1)Create RFC Conexion in SM59
2)Create Source System in RSA1
But in the last step of the creation Source System in RSA1 shows up the following Error Message:
"The source system already exists"
So i checked in the source system list, and it does not exists.
Can anyone help me about this?
THANKS A LOT !!!

Hmm.. not very good over here.. but can you dubleclick and see if they are leading to different clients or not?
I think they are 2 different clients of the R3's .. so this should be posible..
Did you created a new logical system and new RFC destinations for this new one?
May be that it is pointing out to the existing destination..
regards,
Hari

Source System Error

Hi Experts ,
I have to create a source system for Production server in BW Ides .
My Production server client 999 , It is assigned to Logical system CL999.But CL999 Uses a RFC Destination to support place so it could not be changed .
So i created own logical system LSYS999 . And created a RFC Destination to BW and used that in Port .But my Logical system is not assigned to client.
If i check My RFC connection on both sides it works fine.
The source system is also created in BW , RSBASIDOC Table also has Active state.
I created a generic data source in Production Server , Replicated in BW , It also came.
Now the problem is when i assign Data source to info source , During Activation the following error comes
Error in source system CL999
Message no. RSAR502
Diagnosis
With Remote Function Call to system CL999 error Function module "RSAOU_BWBC_GET" not found. ccurred.
Procedure
Remove the cause of the error.
How to solve this .....Awaiting for your great response
Regards
Shiba

Hi,
please go in rsa1 onto the relevant source system and press "check". I assume that the connection is not fine. This will help you to get some more detailed information.
Follow the protocol.
hth
cheers
sven

Source System Error in BW

Hi,
RSA1-->Source System...context menu and check
I am getting the following error
Result of the destination check: No authorization to log on as a
trusted system (Tr usted RC=1).
how shall i proceed
Thanks

hi Krishna,
check SM59 for RFC destination used for that source system, normaly the same name used.
try to check 2nd tab 'logon/security', check option for 'trusted system', try to change to 'No'.
you may need basis assistance.
hope this helps.

Collection in source system error

Hi,
Recently we just performed a BW SP upgrade to 3.0B level 28. During our first extraction after upgrade on production for 0HR_PY_1 (Payroll Data) infosource, we encountered a message "Collection in source system ended".
Anybody has any clue about the cause and how to go about resolving it?
Thanks.
Best regards,
Taly

hi Taly,
datasource need to be replicated from source system (r/3) in production.
area to check -> in monitor request, menu 'environment' check job overview both bw(datawarehouse) and r/3(source system - equal to transaction sm37 - see if job cancelled and any helpful error message like sql error., from menu-environment check the same bw and r/3 for shortdump (st22), transaction rfc, ale management, system log(sm21) and so on, please let's know what's your finding there, possibly source system problem with that message, may ask basis for help. hope this helps.

Source system mapping for transport

We just create a change request for an InfoSouce. Now we transport this change request from DEV system to TEST system. But when this change request was imported on TEST system, got the "Method Execution" red error which can be checked through STMS in log. The red error msg is "Source system A does not exist", where A is our R3 DEV server. Actually we need the source system B which is R3 TEST server in the InfoSouce transported into BW TEST system, but the problem is that the change request was created on BW DEV which uses A as Souce System in the InfoSouce, then how to make the InfoSouce has B on BW TEST after the transport?
Roberto gave an answer (see my another post: What should BASIS do for an InfoSource transport for Souce System change?) as below:
"you have to set the source system mapping in your target system in RSA1, Transport Connection -> F8 and then import your request again !"
But he said this setting would be done at the target or TEST system. I don't think it's right, this mapping setting should be done at the DEV system since our transports are created in DEV Transport Connection, am I right?
Please verify who is right?

hi Kevin,
let's refer to sap's doc
'bw and transport'
https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/docs/library/uuid/3010ba90-0201-0010-2896-e58547c6757e
p. 33
'.. make sure to set the source system mapping configuration in each target system to convert the transfer rules ..'

When I use my dvd on my Imac I get a system error for the visualisor when switching to apple TV

When I use my dvd on my IMac I get a visualisor system error when I activate Apple TV

How would I check to see if the like works when I enable via the inspector pane
If you enable hyperlinks when you click on the link link to the pdf file it will open a browser window and display the pdf file.
I upload the pdf files to the server and link to them as if they were an external web page:
That's been more reliable for me than linking to the file as Link To: A file and have iWeb upload the pdf file to the serve.

Source system connection for DB connect.

hi experts
presently the data is available in sql server(legacy system).so we have to extract data from sql server to bw server through DBconnect.tell me the procedure for how to connect sql server to BW server through DB connect.

hi Suresh,
there is pdf 'Transferring Data with DB Connect' https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/docs/library/uuid/2f0fea94-0501-0010-829c-d6b5c2ae5e40
and bear in mind ...
1. You have to create a special login for the extraction.
You should add this login to the db_ddladmin database role in the corresponding database. This generates a similar DB user at database level. The user you use must have the 'CREATE VIEW' authorization at least. This is contained in the mentioned role.
2. For the extraction, you should only use DB views that were created under this DB user. (See also type conversion, naming convention, and so on).
3. The selected user should be granted the required authorizations (SELECT at least) on the source tables, or on the columns of these tables.
4. The especially created login is to be used in the logon information when you are setting up the DB source system in BW.
hope this helps.

Source System Error for 0Material_Attr

Similar Messages

Maybe you are looking for