Source system error - RFC connection failed

Hi Gurus,
I have installed ECC6 on my PC but not when i am trying to created the DS its not allowing me its saying appl comp hierarchy for source susyem "T90*" doesnt not exist.
so tried going to source system -> done a check for my source system then i got the following errors
Source system "T90*" is inactive
Entry in outbound table not found
Entry in inbound table not found
Basic type does not exist
Check failed for RFC connection T90CLNT090 ; check destination
can any one tell me how to fix this issue?
Regards,
Ravi

Hi Ravi,
Did you run appication component hierarchy in source system(TX-RSA9)
then activate your data source
then replicate in BW system.
Check here for BW connectivity with source system.
https://www.sdn.sap.com/irj/scn/wiki?path=/display/bi/stepbyStepBusinessIntelligence
Thanks,
Vijay.

Similar Messages

Creating new Data Source Error - Database connection Failed

Successfully installed and configured 11.1.1.3.0. Planning and Essbase dev.
Went to Workspace > Administer > Classing Planning Administration > Manage Data Sources > Create Data Source.
Entered all info about the application database , etc. Getting error "The database connection failed" (I was able to connect with no problem during the install)
SQL server 2005 is on the same physical server.
The diagnostic tool shows database connection passed for planning. A new database was created for the new application.
The server event viewer shows these errors.
"Login failed for user 'xxx-hyperion'. The user is not associated with a trusted SQL Server connection."
Group Policy Error "The client-side extension could not apply computer policy settings for 'Default Domain Policy {xxx}' because it failed with error code '0x80070003 The system cannot find the path specified.' See trace file for more details. "
The Group Policy client-side extension Group Policy Services failed to execute. Please look for any errors reported earlier by that extension.
Any help is appreciated.

Datasource for the application.
I have created a sql db for this planning application (my datasource). See my first message for more details.
When you create a new planning application, you need to associate it with a data source. Since this is a new install, I don't have any data sources available yet.
So, "To create, edit or delete data sources, click Manage Data Source."
This page lets you validate your connection to the database and essbase server. My essbase server connection validates! The database connection does not validate after I enter all the relevant information.
SCREEN INFO BELOW
Fields displayed with an asterisk (*) are mandatory.
Data Source Name *:
Data Source Description:
Select Database Platform
Microsoft SQL Server
Application Database
Server * :
Port * :
Database *:
User *:
Password *:
Click "Validate Database Connection"
ERROR ---> Database connection failed.
So it does not let me create a data source for my new planning application, so I cannot create a new planning application.
Thanks in advance.

Please Help: Error! Connection failed to MaxDB (Linux)

Hello,
our current situation is, that we copied manually (after a system crash) all files under /sapdb from an old backup into the our (empty) Live system. Only the database files under sapdb/KRT/sapdata comes from the chrashed SAP system. These files are not lost.
If we start the Sap System following messages appears:
Checking ADA db Database
ABAP Database is not available via R3trans
Starting SAP-Collector Daemon
09:04:34 27.04.2010   LOG: Effective User Id is root
This is Saposcol Version COLL 20.95 700 - v2.12, AMD/Intel x86_64 with Linux, 2008/01/02
Usage: saposcol -l: Start OS Collector
        saposcol -k: Stop OS Collector
        saposcol -d: OS Collector Dialog Mode
        saposcol -s: OS Collector Status
The OS Collector (PID 5469) is already running .....
saposcol already running
Running /usr/sap/EC6/SYS/exe/run/startdb
Trying to start database ...
Log file: /home/ec6adm/startdb.log
Database start failed
DB startup failed
Our system administrator is ill and i'm not a system administrator.
Could you help me ?
Thank's lot
Franz

Some additional informations:
/home/ec6adm/startdb.log:
Di Apr 27 09:04:34 CEST 2010
LOGFILE FOR STARTING DATABASE
Trying to start database ...
Di Apr 27 09:04:34 CEST 2010
Checking required environment variables
SAPSYSTEMNAME is >EC6<
Start database with xuserkey >c<
Di Apr 27 09:04:34 CEST 2010
Connect to the database to check the database state
dbmcli: connect check finished with return code: 0
Database not available
Di Apr 27 09:04:34 CEST 2010
Starting XServer
    12916 XSERVER Found other running x_server with version 'X64/LIX86 7.6.03   Build 009-123-163-622'
    12902 XSERVER started, 'already...'
Di Apr 27 09:04:34 CEST 2010
Starting database
Starting Database Instance...
Error! Connection failed to node kurt for database KRT:
database not found
Opening Database...
Error! Connection failed to node kurt for database KRT:
database not found
Di Apr 27 09:04:34 CEST 2010
Connect to the database to verify the database is now open
dbmcli check finished with return code: 0
Database start failed

A *** ERROR = RFC ====== connection closed (no data)

I trace data On Instance DEV_W0 the had Error as below
A *** ERROR => RFC ======> connection closed (no data)
Please Kindly verify the cuase and recommend in this issue .
Edited by: SoeyTH on Dec 6, 2010 3:38 PM

You need to proivde more logs to find what caused.
Is you SAP up?

Error "NetAuthSysAgent: ERROR: AFP_GetServerInfo - connect failed 64"

Error ”NetAuthSysAgent: ERROR: AFP_GetServerInfo - connect failed 64”
Some years ago I stopped to use my external network hard disc. Then I updated to Mac OS X 10.6. I guess from that time on, always at startup I had following error pop-up window:
“There was a problem connecting to the server “networkspace.local”. The server may not exist or it is unavailable at this time. Check the server name or IP address, check your network connection, and then try again.”
The console has this log lines:
“NetAuthSysAgent: ERROR: AFP_GetServerInfo - connect failed 64”
My file com.apple.AppleShareClient.plist look that way:
What is wrong? How can I get rid of this error pop-up window.
I moved now to Mavericks, but the same error occurs.
Regards,
M.

Hi! I had the same problem. But I was faced with it just in a few days after first setup a new mac. And I needed to solve it .
My problem was in mac firewall. One of my apps needed connection to my remote mac via afp. And it was added to firewall rules. Like a skype on this screeenshot (sorry for russian language, it is firewall settings window):
I removed the app from this list and the problem was sold.

Mifi 2200 - Error 691: Connection Failed - Access was denied ...

I have set up a Mifi 2200. It CAN work great. Intermittently though, I can't get connected wheen using the device as a USB modem. It will ALWAYS connect fine when I connect through Wifi.
The error I get: Mifi 2200 - Error 691: Connection Failed - Access was denied because the username and/or password was invalid in the domain.
I have done all the usual things:
1. Reinstalled the VZAccess Manager software including latest update. I am at 7.3.13.1 (2635a)
2. Obtained all latest Windows updates (XP SP2).
3. Removed, replaced, manually, auto-configured a Dial Up Connection many times.
4. Replaced the USB to microUSB cable.
I found the VZAccess Managers diagnostic tool where you press CTRL-D and enter the password diagvzw and see some additional settings.
There I had a minor break through. There is a setting where I can force the modem to only use 1X. If I do that, I connect every time without fail. No problems, no errors. The moment I put that setting back to Auto or forced EVDO, I fail again, or only work every 20th try or so after a reboot of the device etc.
Is anyone else seeing this, or getting this error? It can't be an account issue since it works sometimes on EVDO and ALWAYS fine on 1X.
Thanks for any help or ideas.
PN

I think I have an update that might be a clue that it IS an Verizon issue either with the device itself or at the towers.
I have determined that when I connect to it through WiFi where I mentioned it seems to ALWAYS work. Well, it always works in 1X mode there. It fails in EVDO mode.
Something up at the towers? Although multiple towers have been tried.
Anyone any ideas?

Source system settings DB Connect

trying to change the IP settings for source system get message
:Source system default settings are maximun values; input adjusted..
Source system is DB connect, any idea how can change settings?
It is correctly in BW : sbiw and spro set to correct level of 50 000.
But somehow the IP says the settings max is 5 000.
I need to increase this level as I have 10m records to load. .
Please asssit.
Thanks

Follow OSS note 931226 for DBConnect datasource related packetsize setting.

"Sync encountered an error while connecting: Failed to connect to the server. Please try again."

"Sync encountered an error while connecting: Failed to connect to the server. Please try again." message has appeared on both my desktop (OS 10.6.8, FF 6.0.2) and laptop (same).
This error is not covered in your help documentation.
I have an active internet connection.
I have tried resetting the Sync on the laptop several times over the last few weeks.
Please advise.
Thanks

Hi!
It seems that you are not using the latest version of Firefox. Please, update and try again: http://www.mozilla.org/firefox

I keep getting this message "Sync encountered an error while connecting: Failed to connect to the server. Please try again" What's the problem in English

I keep getting this message "Sync encountered an error while connecting: Failed to connect to the server. Please try again" What's the problem in English

Hi,
Sometimes the server is not available and you can get an error like this one. Usually it works if you try to sync later. If this doesn't work, take a look to [https://philikon.wordpress.com/2011/06/13/how-to-file-a-good-sync-bug/ this post] to learn how to report a bug.
Let me know if this is helpful.

RFC connection failed - When using code created by "GENERATE PHP" button

Hi All,
I can use the saprfc_test.php to login, call a BAPI and return data from SAP. But on the same BAPI screen if I click the generate php button and copy the new .php file into my /htdocs/saprfc folder and execute it the browser it returns with "RFC connection failed"
I am totally stuck, please can anybody help?
Rob.

I needed to specify "MSHOST"=>"", Its strange that this was not neccessary for interactive scripts but the problem is solved

Cisco Show and Share Error: NetConnection.Connect.Failed

Hi
I installed Cisco DMM 5.2.0.25 and also CVP. I can able to view videos from the browser of certain PCs . But if i open the same link from another Laptop or PC( which are in same network and domain), I cant able to view the video. It shows an error "NetConnection.Connect.Failed". Am opening through Mozilla Firefox.
Prasanth Abraham

Hi Prasanth,
This looks to be an error of the flash plugin. Could you check if affected PCs have a supported version of Flash or of the Browser, as documented at:
http://www.cisco.com/en/US/prod/collateral/video/ps9339/ps6681/data_sheet_c78-565776_ps6682_Products_Data_Sheet.html
Mozilla Firefox 3.5.3 / 3.6.3
Adobe Flash v.10 recommended
Regards,
Marco

Sync encountered an error while connecting.Failed to connect to server.

Cannot connect to server. "Sync encountered an error while connecting: Failed to connect to the server."
Help!
This happened yesterday 1/20 after my daughter was in her e-mail account. Had trouble with the screen also.

I started having this problem after the download of the new Firefox 5.0. No solutions posted have worked so far. FIPS is already disabled.

Source System Error While transporting

Hi SDN,
We are transporting requests to a deployment test box SN1 and we are getting this error message while we never got this error message transporting to QAS and in QAS we did not need to create DEV010 as a source system - setting up RFC connection was sufficient.
Any thoughts?
===========================================================
Source system DEV010 does not exist
Message no. RSAR409
Diagnosis
Source system DEV010 is not known.
System response
The imported data for data source 8ZM_C42 was deleted again as the referenced source system does not exist and no mapping is defined in table RSLOGSYSMAP to an available productive source system.
Procedure
Create the referenced source system in the Administrator Workbench or define a mapping to a known source system in table RSLOGSYSMAP.
You get to the maintenance using Tools -> Conversion of the logical system names.

Speak to your basis team and ask them to make entries in table:
RSLOGSYSMAP .
Are you trying to transport info source or any source system dependt object? If so, this error is understandable.
This has been discussed several times and pl search the forum.
Ravi Thothadri

Source System Error

Hi Experts ,
I have to create a source system for Production server in BW Ides .
My Production server client 999 , It is assigned to Logical system CL999.But CL999 Uses a RFC Destination to support place so it could not be changed .
So i created own logical system LSYS999 . And created a RFC Destination to BW and used that in Port .But my Logical system is not assigned to client.
If i check My RFC connection on both sides it works fine.
The source system is also created in BW , RSBASIDOC Table also has Active state.
I created a generic data source in Production Server , Replicated in BW , It also came.
Now the problem is when i assign Data source to info source , During Activation the following error comes
<b>Error in source system CL999</b>
Message no. RSAR502
Diagnosis
With Remote Function Call to system CL999 error Function module "<b>RSAOU_BWBC_GET</b>" not found. ccurred.
Procedure
Remove the cause of the error.
How to solve this .....Awaiting for your great response
Regards
Shiba

Hi,
please go in rsa1 onto the relevant source system and press "check". I assume that the connection is not fine. This will help you to get some more detailed information.
Follow the protocol.
hth
cheers
sven

Error RFC Connection

Hi Gurus,
I have a problem when i try to do a RFC connection Between SAP and Windows, this's the error message log Tx, sm59..
EntrSist.     Error de conexión
Det.error     / CPIC-CALL: 'ThSAPOCMINIT' : cmRc=17 thRc=236 SAP gateway connection failed. I
Det.error     ERROR: SAP gateway connection failed. Is SAP gateway started?
Det.error     LOCATION: SAP-Server devinc_ICT_02 on host devinc (wp 1)
Det.error     COMPONENT: CPIC
Det.error     COUNTER: 6
Det.error     MODULO:
Det.error     LINE:
Det.error     CÓD.RETORNO: 236
Det.error     SUBRC: 0
Det.error     RELEASE: 700
Det.error     TMP.: Tue Aug 31 11:13:57 2010
Det.error     VERSIÓN:

Anup,
the entry sapmsDEV is missing in your "services"-file on the computer that hosts your SLD-Server/J2EE WAS. Windows locates it at %WINDIR%/system32/drivers/etc, unix usually at /etc/.
make an entry like that:
sapmsDEV   3600/tcp (in case, your Systemnumber is 00, otherwise replace the "00" with your actual systemnumber)
kind rtegards, achim

Source system error - RFC connection failed

Similar Messages

Maybe you are looking for