Source System Error While transporting

Hi SDN,
We are transporting requests to a deployment test box SN1 and we are getting this error message while we never got this error message transporting to QAS and in QAS we did not need to create DEV010 as a source system - setting up RFC connection was sufficient.
Any thoughts?
===========================================================
Source system DEV010 does not exist
Message no. RSAR409
Diagnosis
Source system DEV010 is not known.
System response
The imported data for data source 8ZM_C42 was deleted again as the referenced source system does not exist and no mapping is defined in table RSLOGSYSMAP to an available productive source system.
Procedure
Create the referenced source system in the Administrator Workbench or define a mapping to a known source system in table RSLOGSYSMAP.
You get to the maintenance using Tools -> Conversion of the logical system names.

Speak to your basis team and ask them to make entries in table:
RSLOGSYSMAP .
Are you trying to transport info source or any source system dependt object? If so, this error is understandable.
This has been discussed several times and pl search the forum.
Ravi Thothadri

Similar Messages

Importance of "Source System Assignment While transporting the objects

Hi Friends,
What is the Importance of "Source System Assignment While transporting the objects. And when do we select this icon. what is the exatly significance for this.
Thanks in advance for all......
Regards,
Ramesh.

HI Rameshpennabadi ,
This option is only enable for object like transfer rule, data source and IP if you want them to assign source systems,other wise the dialog box Choose Source system by Default? appears.
Thanks,
Deepak

Source system assignment while transporting to quality

Hi Guys,
I have the following landscape.
I have created 2 source system ECCDEV and CRMDEV for my BIDEV.
Now I wish to do transport to Quality box and i want to know what should be the source system assignment , I should maintain in rsa1->transport connection -> conversion of logical system name.
When I maintain ECCDEV -
> ECCQUA
I get the error : ECCQUA entry does not exist in TBDLS.
Do I have to maintain source system ECCQUA(Quality) in BIDEV(Development) itself?
-Amit

Hi Rakesh,
Let me know if my understanding is correct.
In DEV BI, I create a connection to DEV ECC.
Also, I create source system ID's for source system.
In the QUA BI, I create a connection with QUA ECC.
and assign source system connection (source and target) i.e. DEVECC and QUAECC.
Then I transport requests(activated datasources) from DEVECC to QUAECC and replicate the datasource in QUABI.
Please Confirm.
-Amit

Source System mapping while transporting objects from Q to P

Hi All,
I have moved all my transports from BW DEV to Q twice with different source system mappings, say R3D to R3Q and again R3D to R3X, as I have to do testing from both the source systems.
Now, I have to move all those transports to PROD and I found out that they will be moved from Q to P and not from DEV to P. In such case, what source system mapping should I maintain in P? Is that R3Q to R3P or R3R to R3P?
Hope I am clear with my question. Please let me know if it is not clear.
Thanks,
RPK.

Hi Nasiroddin,
Itseems I am not clear with my question. Let me put it in another way.
My BWQ is connected to two R/3 source systems, say R3Q and R3X where as my BWP is only connected to R3P. While transporting the requests from BWQ to BWP, I know that I have to maintain the source system mappings(Tools->Mapping of the source system names). Now I am in doubt about what mapping do I need to maintain(either R3Q->R3P or R3X->R3P)? Which source systems transfer rules etc.(all source system dependant objetcs) will be transported, either R3Q or R3X?
Thanks,
RPK.

Error while transporting - Source RSDS 8ZRF_O01 LOGDBQ151 does not exist

Hi,
I am getting following error while transporting export DataSource to quality system.
Start of the after-import method RS_TRFN_AFTER_IMPORT for object type(s) TRFN (Activation Mode)
No rule exists
Source RSDS 8ZRF_O01 LOGDBQ151 does not exist
Start of the after-import method RS_DTPA_AFTER_IMPORT for object type(s) DTPA (Activation Mode)
Transformation does not exist (see long text)
Although, the request is failing, I can see the DataSource 8ZRF_O01 present in the QA system. Only the transformation is set inactive.
Regards,
Pranav.
Edited by: P D on Sep 20, 2010 9:02 AM

Hi
might be your data source not collected into transport request.
If you are moving data source from once system to other system, this may missed.
RSA1->Transport connection>all objects>Datasource --> Select your data source as only neecessary to move
When ever we are moving objects from one system to other follow below are order to avoid failures
1).New Infoobjects.
2). Data source/Infosource
3). Info Providers ( Cube/DSo)
4). Update rules/Transformation
5).Impacted objects and other
Mahesh.

Error while transporting database index into quality system

Hello,
I am getting an error while transporting a new index in quality system.
I have created a new index for table VBFA in TRD and activity the object without errors. I even adjusted the database table using database utility.
While transporting the request there was a strange error "R3TRTABLVBFA was repaired in this system".
I retransported the objects using a new request. However I still got the same error.
Please help.

Navin,
No idea about the error you have mentioned but check the SAP Notes 185530 and see if you can avoid creating an index.In this Notes it is clearly mentioned on how to use VBFA table without any performance issues.
K.Kiran.

Error while transporting custom datasource

Hi All,
Below is the scenario that was carried out in my project.
1. Created OHD to load data from a CUBE to Data base Table /BIC/ABC.
2. Created a custom Datasource ZABC_TEST with the above table.
3. Activated the DataSource and loaded the data. (Data load successfull. It works fine).
4. Tried transporting the above. But trows error while transporting the data source.
Error -- InfoSource ZABC_TEST is not available in source system BITST.
Let me know what can be done to solve the above error. Please suggest if i have missed out something.
Thanks in advance.
Maddy

HI,
The problem seems to be occuring since you are transporting both OHD and DS in the same TR request.
Transport first the DS in a request, then in another request transport the OHD.
This should resolve the issue.
hope this helps.
thanks,
rahul

Error While Transporting Transformation

Hi Gurus, I have this issue that I am getting an error while transporting Transformation. I made sure that that only transformation is sected and nothing else. I am getting this error message while importing it in BWQ environment "Formula 4AY060939P5D2NKRXKMJFECLS is already locked in the requests of other users or the system is set so that formula 4AY060939P5D2NKRXKMJFECLS can no longer be changed."
I was wondering, if this is locked by some other object or transport request, how can I find that out? Thanks in advance for all the help.

Hi,
You can check if the request is locked by another transport in BWQ by using the transaction SE03.
First find the object directory entry for your object(you can take this from your transport. Go to SE03 --> 'Search for Objects in Requests/Tasks '. Under object selection enter the details as in your transport and select the check box against your new entry. Under Request/Task selection, select 'Modified' and 'Released'. Execute. You will now see a list of transport requests that contain your transformation. Check these & either release them or delete your object from the modifable transports. Re import your transport.
You can check if this object was locked by a person using the transaction SM12.
Regards,
Shilpa

Error while transporting objects:Internal error during pvc call: Parameter

Dear all,
We are facing the following error while transporting the individual configuration objects from our PI development system.
Export failed: Internal error during pvc call: Parameter versionSpecifier or version has the invalid value null .
However, it works fine when the complete configuration scenario is transported.
We tried to transport the objects with different user id's, even then the issue still exists.
Any inputs to resolve this will be highly helpful.
Thank you,
Younus

Hi Mohammed,
Answer is inside this oss [Note 1554387 - Error during export from Integration Directory|https://service.sap.com/sap/support/notes/1554387]. In this oss note, solution is to apply a patch (just a patch, not a SP). as it's a litle sap bug...
Note: your issue is also explained with picture in this one "1550549 - PI transport: Internal error during pvc call" (sorry for this one I cannot insert a link)
regards
Mickael
Edited by: Mickael Huchet on Jan 26, 2012 2:50 PM

Error while transporting Openhub (BI7)

Hi Gurus,
I am getting an error while transporting the open hub. In the dev system it worked perfectly but when i transport it to quality, it is showing the following error.
"Unable to activate table /BIC/OHZxxxxxx ."
When i checked the table in quality it says that /BIC?OHZxxxxx-0UNIT ( Reference field ) does not exists. But 0UNIT is there in the DSO on which i developed the openhub and the infoobject 0unit is also active in quality system.
Why this error is happening?
Regards,
Raghavendra.

Hi Raghavendra,
There are chances of missing some objects in transport request wile assigning objects to request...please check the objects list and open hub structure.
and also plsease check the 0Unit field status in Quality system.if it is in modified status means make it it active ststus.
Please create one more transport request and validate the tr objects...
Best Regards,
maruthi

Error while transporting Infocube

Hello all,
i am getting following error while transporting infocube to testing system.
Please see the bellow error message details.
Error/warning in dict. activator, detailed log > Detail
Structure change at field level (convert table /BIC/DZMD_Y_MR2)
Structure change at field level (convert table /BIC/FZMD_Y_MR)
Table /BIC/DZMD_Y_MR2 could not be activated
Table /BIC/FZMD_Y_MR could not be activated
Return code..............: 8
Following tables must be converted
ZMD_Y_MR InfoCube could not be activated
Thanks in advance.
BR,
YVReddy

Dear Venkat,
Looks like you have changed the fields on the infocube.Just wanted to make sure that did u delete the 'data' from the cube 'ZMD_Y_MR' in the testing system before u make the traansport?
for any changes in the cube fields (except addition of new char) u may need to delete the cube data..
regards,
Srini

Error while transporting standard cube

Hi
We are facing errors while transporting a standard cube and all relevant objects.
While collection it throws errors saying certain routines are not active, whilst unable to find those routines.
If we ignore and transport the same, transformations es are not being transported.
How to resolve this., please provide inputs.
regards
Lavanya

Hi Lavanya
The error log says these objects are in repair mode in this system. I searched the system for the trnsformations, but they are not present. How do we resolve these
This only means that the objects were changed directly in the target system (could be QA or prod) and are captured in some request. You need to find the relevant request on the target system and take the appropriate action. You could chose to delete the request or transport it from QA to Prod.
Find the requests on the target system and you will see the tranaformations collected. However, it is not going to be an easy taskl for you to find as the TR will be with the technical name. But this is definitely the reason for the error.
Cheers
Umesh

Error while transporting 0MAT_PLANT

Hi Experts
I am getting error while transporting 0MAT-PLANT to Prod System.It going fine to QA system.
it is giving the follwoing error with return code 8
Characteristic 0MAT_PLANT: Master data has to be activated before conversion
Start of the after-import method RS_IOBJ_AFTER_IMPORT for object type(s) IOBJ (Delete Mode)
Errors occurred during post-handling RS_AFTER_IMPORT for DTPA L
RS_AFTER_IMPORT belongs to package RS
The errors affect the following components:
BW-WHM (Warehouse Management)
I have deleted one Info-object (Key figure) and added one info-object(Key figure) to 0MAT_PLANT ,transported still it is giving errors it is going fine to QA.
1.Is it because we have large no of records in Prod system ..??
2.Do we need to delete the data in Prod for 0MAT_PLANT and transport....????
3.Is it related to any database error in adjusting P table in Prod...?
Please let me know anybody faced this kind of problem.
Regards
Prasad

Hi Prasad,
Just to summarise the discussion. If you need to send the transport successfully you need to the following steps:
1. MD (complete) needs to be deleted from IOBJ. Please note, unless you delete the TD data involving the IOBJ, you will not be able to delete MD completely.
The reason being, the SID's for the MD are being used in the various IC/DSOs. So you need to go by deleting related TD and then MD.
2. Secondly, if you forcibly delete for 'P' and 'S' table using the SE14-> Table Name -> Delete Data & adjust Db. This will cause lot of inconsistencies on Drill Down in reports and even on execution as SID values are missing!
Moreover, as you said there are around 10/12 InfoProviders involved here, then this forcefull deletion can cause a real imapct to your Prod system and make many reports unsusable! So pls be careful!
Please decide accordingly as there is a trade off here!
-VA
Edited by: Vishwa Anand on Sep 27, 2010 12:15 PM

Error while Transporting Update Rules.

hi xperts,
   I am getting Error while Transporting the Update rules,i already transported the INFOCUBE,INFOPACKAGE EVERYTHING.
    Start of the after-import method for object type R3TR ROUT (Delete Mode)
Errors occurred during post-handling RS_AFTER_IMPORT for ROUT L
The errors affect the following components:
    BW-WHM (Warehouse Management)
Is the error,I didn't change any thing in the Cube or changes to Update rules.
Can anybody Help me?.
   thanking you,
                               with regards,
                               Narendra.

Hi,
Are you still facuing the issue ?
No need to worry about the routines, once you save the update rules if there is any routines in it it will be saved in the same request. If you want to check the routines you can check in the transport connections. Transfer the update rule to the right hand side of the screen and you can see all the routines that belong to the UR.
If you know the technical names of the routines you can check in the TADIR table.
Have you transported the info-sources for this update rules ? why not you again capture the info-source and the update rule in a single request and transport again.
Hope it helps.
Thanks,
Soumya

Error while transporting Queries

Hi,
I am getting this error while transporting queries!!
Object '!ZTIC_UKA' (ELEM) of type 'Query' is not available in version 'A'
Message no. RSO252
Diagnosis
You wanted to generate an object with the name '!ZTIC_UKA' (in transport request ELEM) of type 'Query' (TLOGO). This is, however, not available in the BW Repository database. It does not exist in the requested version A. If the version is 'D' then it is possible that an error arose during the delivery or installation. If the version is 'A' then the Object was either not created or not activated.
System Response
The object was not taken into account in the next stage of processing
Thanks

Hi Murali,
YOu are trying to transport the element ZTIC_UKA' of the query,may be an variable which is not colelcted in the request.
Try to transport the query through RSA1> Transport connection->Query-->give you query name -->Drag and Drop to Right hand side and Click on collect all dependent objects and check whetehr they have collected in the same request.Make sure ur variables are collected.
Tranport it now and Check.
Rgds
SVU123
Edited by: svu123 on Mar 4, 2010 7:41 AM

Source System Error While transporting

Similar Messages

Maybe you are looking for