Source System Error

Hi Experts ,
I have to create a source system for Production server in BW Ides .
My Production server client 999 , It is assigned to Logical system CL999.But CL999 Uses a RFC Destination to support place so it could not be changed .
So i created own logical system LSYS999 . And created a RFC Destination to BW and used that in Port .But my Logical system is not assigned to client.
If i check My RFC connection on both sides it works fine.
The source system is also created in BW , RSBASIDOC Table also has Active state.
I created a generic data source in Production Server , Replicated in BW , It also came.
Now the problem is when i assign Data source to info source , During Activation the following error comes
Error in source system CL999
Message no. RSAR502
Diagnosis
With Remote Function Call to system CL999 error Function module "RSAOU_BWBC_GET" not found. ccurred.
Procedure
Remove the cause of the error.
How to solve this .....Awaiting for your great response
Regards
Shiba

Hi,
please go in rsa1 onto the relevant source system and press "check". I assume that the connection is not fine. This will help you to get some more detailed information.
Follow the protocol.
hth
cheers
sven

Similar Messages

Source system error - RFC connection failed

Hi Gurus,
I have installed ECC6 on my PC but not when i am trying to created the DS its not allowing me its saying appl comp hierarchy for source susyem "T90*" doesnt not exist.
so tried going to source system -> done a check for my source system then i got the following errors
Source system "T90*" is inactive
Entry in outbound table not found
Entry in inbound table not found
Basic type does not exist
Check failed for RFC connection T90CLNT090 ; check destination
can any one tell me how to fix this issue?
Regards,
Ravi

Hi Ravi,
Did you run appication component hierarchy in source system(TX-RSA9)
then activate your data source
then replicate in BW system.
Check here for BW connectivity with source system.
https://www.sdn.sap.com/irj/scn/wiki?path=/display/bi/stepbyStepBusinessIntelligence
Thanks,
Vijay.

Transporting 0material_attr gives reference source system error...

Hi Experts,
I know its not recommended but for some reasons we were trying to move 0material_attr data source and transfer rules and transfer structure 0material_attr_ba from quality system (QAS) to Development system. And every time we are getting the error "Source system QAS does not exist" while importing the request in DEV.
The reason for this error is that it is still keeping the reference source system of quality as QAS which is not there as logical system in DEV. My question is isn't it should automatically refer to R/3 DEV when imported to development system.
Thanks
Vishal

Hi,
As pointed out by Joke in the previous post, you need to maintain the mapping of logical system name for transportation.
In Dev, go to RSA1> Tools--> Conversion of logical system names.
Here create new entries.
Your Original Source System would be the QAS Logical System Name & Target Source System would be DEV Logical System Name.
Once entry is saved, re-import the transport request and check.
Hope this helps!

Source System Error While transporting

Hi SDN,
We are transporting requests to a deployment test box SN1 and we are getting this error message while we never got this error message transporting to QAS and in QAS we did not need to create DEV010 as a source system - setting up RFC connection was sufficient.
Any thoughts?
===========================================================
Source system DEV010 does not exist
Message no. RSAR409
Diagnosis
Source system DEV010 is not known.
System response
The imported data for data source 8ZM_C42 was deleted again as the referenced source system does not exist and no mapping is defined in table RSLOGSYSMAP to an available productive source system.
Procedure
Create the referenced source system in the Administrator Workbench or define a mapping to a known source system in table RSLOGSYSMAP.
You get to the maintenance using Tools -> Conversion of the logical system names.

Speak to your basis team and ask them to make entries in table:
RSLOGSYSMAP .
Are you trying to transport info source or any source system dependt object? If so, this error is understandable.
This has been discussed several times and pl search the forum.
Ravi Thothadri

Create Source System - Error

Hi Gurus,
I have to create a conexion with R3 so i did :
1)Create RFC Conexion in SM59
2)Create Source System in RSA1
But in the last step of the creation Source System in RSA1 shows up the following Error Message:
"The source system already exists"
So i checked in the source system list, and it does not exists.
Can anyone help me about this?
THANKS A LOT !!!

Hmm.. not very good over here.. but can you dubleclick and see if they are leading to different clients or not?
I think they are 2 different clients of the R3's .. so this should be posible..
Did you created a new logical system and new RFC destinations for this new one?
May be that it is pointing out to the existing destination..
regards,
Hari

Source System Error in BW

Hi,
RSA1-->Source System...context menu and check
I am getting the following error
Result of the destination check: No authorization to log on as a
trusted system (Tr usted RC=1).
how shall i proceed
Thanks

hi Krishna,
check SM59 for RFC destination used for that source system, normaly the same name used.
try to check 2nd tab 'logon/security', check option for 'trusted system', try to change to 'No'.
you may need basis assistance.
hope this helps.

Collection in source system error

Hi,
Recently we just performed a BW SP upgrade to 3.0B level 28. During our first extraction after upgrade on production for 0HR_PY_1 (Payroll Data) infosource, we encountered a message "Collection in source system ended".
Anybody has any clue about the cause and how to go about resolving it?
Thanks.
Best regards,
Taly

hi Taly,
datasource need to be replicated from source system (r/3) in production.
area to check -> in monitor request, menu 'environment' check job overview both bw(datawarehouse) and r/3(source system - equal to transaction sm37 - see if job cancelled and any helpful error message like sql error., from menu-environment check the same bw and r/3 for shortdump (st22), transaction rfc, ale management, system log(sm21) and so on, please let's know what's your finding there, possibly source system problem with that message, may ask basis for help. hope this helps.

Source System Error for 0Material_Attr

Hi Gurus,
I have New BI System, when i m loading 0Material_Attr, the whole data is coming but with the status Red. May b the error is with source system. I checked in PSA maintenance and the error detail in source system is mentioned below.
"Value 'A3000014500L ' for characteristic 0MATERIAL is in external format"
"0MATERIAL : Data record 1 ('A3000014500L '): Version 'A3000014500L ' is not valid RSDMD 194".
for detail error check the link below
https://docs.google.com/document/d/1v4uHeg6Ci29zv0qJ21dOH7gttuQyg_VZsLM2IMfZEuM/edit?hl=en&authkey=CLnd8P4H
can anybody help in this regard.
Thanks in advance.
Regards
Manna Das

Hello Manna Das,
0Material has conversion Exit MANT1 which converts the Material in the external format to internal format of the system.
Can you please check if the Converison exit is there?
Thanks,
Sarat

Source system Error of BI- Incorrect Unicode Settings

Hi gurus,
We are facing problems in the source system of BI 7.0,after
installation it self .
As we Click on Check for the source systen of BI it is throwing an
information .
"The unicode settings for destination BD1CLNT300 do not match the source
system."
This is leading to failure of Export Datasource creation for BI system.
and even BEx Personalisation for History.
Please Help.
Our system is having following components:
SAPABA -700-18-SAPKA70018
SAPBASIS-700-18-SAPKB70018
PI_BASIS -2005_1_700-18-SAPKIPYJ7I
SAP_BW-700-0020- SAPKW70020
BI_CONT -703-14-SAPKIBIIQ4
Please suggest the correction as per the patch Level.
Regards,
Deepak kansal

Hi Deepak
Please check below link, let me know if this doesnt help you
[https://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/library/uuid/6038903c-3c32-2c10-2c8b-c5bb71baab67]
-DU

Error when creating R/3 source system in BW3.5

I HAVE CREATED SOURCE SYTEM FOR R/3 TO PERFORM EXTRACTION IN BW-3.5.
AFTER I DID ALL THE BASIC SETTING LIKE CREATING LOGICAL SYSTEM AND ASSIGNING CLIENT AND CREATING RFC DISTINATIONS.
I TRY TO CREATE SOURCE SYSTEM BY RIGHT CLICKING ON SOURCE SYSTEM ROOT NODE AND SELECTED THE OPTION SAP SYSTEM FROM RELEASE 3.0D(MANUAL CREATION) AND ENTERED
RFC DISTINATION : (LOGICAL SYSTEM ID OF R/3)
LOGICAL SYSTEM NAME: (LOGICAL SYSTEM ID OF R/3)
SOURCE SYSTEM NAME: (R/3 SOURCE SYSTEM)
ERROR MESSAGE -- NO:447
BASIC TYPE ZSBA005 DOES NOT EXITS
ACTIVATION OF SOURCE SYSTEM FAILED
PLEASE HELP ME IN THIS ISSUE..
CHEERS
AMAR.

Hi,
Kindly do not type completely in CAPS.
Take a look at SAP Note 140276 to correct errors in source system assignment.
BR/
Mathew.

Error occured in the Source system while loading mater data

hi all
While loadng the master data info package.The request is getting failed with error occured in the source system.
error message says "if the source system is a Client Workstation, then it is possible that the file that was to be loaded was being edited at the time of the data request. Make sure that the file is in the specified directory and is not being edited, and restart the request".
 I had tried repeating the Request but again It is getting failed.
 please help me resolving the issue.
Thanks(=Points)
 Priya

Hello Priya
If u r loading thru flat file
1. Check the correct path in infopackage
2. Check if it is opened,if it is then close it and run package again
If loading thru R/3
1. Check DS is not opened in change mode
2. Check if RSA3 is able to extract data...if it is then check in RSA7 and chk IDOC status...
3. Are you running init..then make sure no document is posted in R/3 side...
Thanks
Tripple k

Failure of infopackage step in process chain - Error in source system.

Hello Experts,
We are experiencing this during the execution of process chain.
All the step for data loads within BW(DSO to DSO, DSO to cube) are failing with error -
- Error in source system
- Error during data selection
Please note that we are 3.5 data flow and thus, data load within BW is through emulated data source and the infopackage. Steps running such infopackages for emulated data source are failing in process chain with error above.
Surprisingly, when I run the infopackage manually out of process chain it runs successful without any error. But when I run through process chain it fails.
Any clue or suggestion? We have already tried doing re-initialization for infopackage.
Appreciate your inputs.
Regards,
PK.

Hi,
When we run data loads thru process chain it will run in background. as per the available background application servers your request will be processed.
as my your during your load time server will be on high load.
please check your system busy schedule and schedule your process chains.
Check Tx - SM50, if you have less application servers, then ask basis to create few more to application servers to process the request at busiest time.
check about increasing parallel processing and default data transfer settings.
go to info package---> menu scheduler--> data settings for default data transfer.
Thanks

Delta Loads failling after system copy with error in source system(RSM340)

Hi Guru's
We recently performed system copy in BI side.I am facing same issue in couple of chains.Process chains are failing at delta loads with error in source system(ERROR IN SOURCE SYSTEM-message no-RSM340 ).When I go for repeat option ,delta loads are running fine.I did some research regarding RSM340 and I found note:1576331.
But my system is not showing any 'Time Inconsistencies'.So.I was not able to find any clue about it.
Could anybody help me out in this aspect.
Thanks!!!
Kuldeep

Hi,
Check whether the profiles that ran in background have the following authorizations.
The RFC user on BW, receiving data from OLTP system, should have S_BI-WHM_RFC and S_RS_ALL in the user profile.
The RFC user on OLTP, receiving request from BW system, should have S_BI-WX_RFC, S_IDOC_ALL, and, B_ALE_ALL in the user profile.
Regards .

Info Source 80FIGL_O06 is not defined in source system

Hi BW Experts,
When I am trying load data from ODS to Cube, I am getting a error messgae stating:
Info Source 80FIGL_O06 is not defined in source system
Error in Source system
This is an urgent issue. Please let me know if you have any suggestions...
Regards,
Reddy.

You can do this 2 ways. Right click on the ODS and say generate export datasource. The datasource will start with 8... and you can find that under Datamarts in RSA1-> Infosource. You can then create an infopackage and load from ODS through the update rules. You have the option of full load or delta load.
The other way you can go about this is again right click on the ODS and say update to data targets and just follow from there.
Did you follow the above steps? Where exactly is your problem?

Idocs missing from source system

Hello,
I am trying to extract data from R3 to BW. I am getting an error message in BI, No idocs arrived from the source system.
In SM58 system showing the message 'No service for system SAPECC, CLIENT 800 IN INTEGRATION DIRECTORY'. Please help on this issue
Regards,
Ramesh

Hi Ramesh,
Check whether the connection is proper between BW & R/3.
Goto your Source system> Right clcik> Check.
You can also check the following :
No Idocs arrived from the source system.
Idocs missing: No selection information arrived from the source system
Error when updating Idocs in Source System
Hope it helps!
Regards,
Pavan

Source System Error

Similar Messages

Maybe you are looking for