Source system icons changes when connecting SAP BW to mySAP ERP 2004
Hi,
Just an Interesting observation in relation to the creation of source systems in SAP BW to SAP Web AS 6.40 based systems (mySAP ERP 2004, mySAP SRM, etc).
I thought it would be interesting to share!
The behavior is logical but can be a surprise for a BW administrator who is not aware of the new internal SAP BW systems within mySAP ERP 2004.
Scenario:
The customer was connecting a stand-alone BW system to two new systems with latest and greatest mySAP ERP 2004 (ECC 5.00) and mySAP SRM.
Observation:
In the past the SAP R/3 source system would be created with a "SAP R/3 icon" indicating a SAP Source system.
<b>As of mySAP ERP 2004, the source systems will be created in the SAP BW standalone system with the "SAP BW System icon".</b>
Note: This is also the same behavior for new releases of mySAP SRM, and other SAP applications that are <u>based on SAP Web AS 6.40 or greater</u>
Why?:
The standalone SAP BW system is connecting to a system that contains an internal SAP BW system. The standalone SAP BW system determines that it is possible to extract <u>both</u> from the internal BW System <b>and</b> from the Plug-in extractors. It simply denotes that this source system is a SAP BW system and uses the BW Source system icon. (Remember SAP BW is client independent*!).
Note: This behavior will still occur even if you do not use the internal SAP BW system within mySAP ERP! It is there whether you use it or not.
Second Note: You can still use the ERP Content extractors from the mySAP ERP Source System as you did in prior releases.
Another related observation:
I would expect that this case will probably be true even if you only use the internal SAP BW.
Scenario: You use the internal SAP BW in another client in the mySAP ERP system than your ERP processing.
Result: The connection between the BW client and the ERP client source system(s) (i.e. client 001 for ERP, client 100 for BW), both the 'myself' and ERP client source systems, will show up as BW source systems!
Source system 001 and source system 100 will be displayed as SAP BW icons because SAP BW is client independent*
user master and authorizations are client dependent
I hope this was interesting.
Cheers,
Mike.
Hello,
I used my user id to login. I recieved a message :
User already exists in source system I continue:
Anothre window pops up : "Check RFC connection" and it asks
'RFC connection already exists in source system . Do you want to check, use or cancel source system connection'
Here I select Use - but i get an error : Error in source system'.
how can i track down this error.
Kindly inform.
Regards,
Nikekab
Similar Messages
-
Changes in ABAP programming 4.7 - mySAP ERP 2004
Hello,
are there any changes or obsolete ABAP commands concerning the upgrade from 4.7 to mySAP ERP 2004?
Are there any documentations on this topic?
Thank you in advance.
Best regards,
M. WeiskatHi,
Refer to the link..
These link talk on these issues..
http://sap.ittoolbox.com/groups/strategy-planning/sap-projectmanagement/r3-47-vs-mysapsap-enterprise-883745#
http://www.absoft.co.uk/absoft/web/site/AbsoftSAPServices/Upgrade.asp
Also refer to this PDF topic
Upgrade Dilemma SAP R/3 Enterprise
or mySAP ERP?
at this link...
http://www.infosys.com/sap/Whitepaper_Upgrade_Dilemma_SAP_R3_Enterprise_or_mySAP_ERP.pdf
Regards,
Tanveer.
Please mark helpful answers -
Creating DataSources for File Source Systems in csv format in sap bw 7.0
Hi,
Please explain how to Create DataSources for File Source Systems in csv format in sap bw 7.0. WITH SCREENSHOTS
Thanks
JINI
Edited by: Jini Jayan on Jun 11, 2008 11:36 AMStep 1. Select Source systems under Modelling in the left panel. In the right panel, right-click Source systems and select Createu2026.
Step 2. Select the FileSystem, manual meta data, data using file inte option, and then click to continue.
Step 3. Enter a name and a description for the source system, and then click to create the source system.
Now create an application component
Step 1. Select InfoSources under Modelling in the left panel. In the right panel, right-click InfoSources and select Create application componentu2026.
Step 2. Enter a name and a description for the application component, and then click to continue. (BW automatically adds a prefix of "Z" to the technical names of application components, unlike the naming system used for other BW objects.If u give the name as AC_DEMO it will be saved as ZAC_DEMO in the system.
Now create infosource
Step 1.Select InfoSources under Modelling in the left panel. Right-click the newly created Application Component , and then select Create InfoSourceu2026.
Step 2. Select the option Master data/texts/hierarchies, and then click to continue.
Step 3. Enter your infoobject name, and then click to continue.
Now you will be asked
Infosource(name) assigned to Appln component(name)?
Click continue
Now go back to workbench and see the Infoobject listed under the Application component name (under Infosource)
Right click the infoobject name and select Assign Datasource
Enter the Infoobject name as Infosource name and the source system name and continue
Now you ll get datasource assignment confirmations for Infosource_ATTR and Infosource_TEXT for master data and text.
Click yes and continue
Now you ll be taken to the Infosource(master data) change screen
Source system name will be given
Below that u need to give the datasource name u2026.._ATTR
Click Activate.
Now Click the tab transfer rules
Copy the communication str infoobject names to an excel sheet
For ex if your infoobj are IO_MATNUM and IO_MATNAME (material number and material name) copy and paste as
IO_MATNUM IO_MATNAME
MAT001 TEA
MAT002 COFFEE
MAT003 SUGAR
GIVE YOUR DATA IN THE EXCEL. AND CLICK File Save As CSV(comma delimited) and save to ur system. Give file name as something like infosourcename_ATTR.csv
Now back to the Infosourcechange screen
Source system name will be given
Below that u need to give the datasource name u2026.._TEXT
And activate
Now Click the tab transfer rules
Copy the communication str infoobject names to an excel sheet
GIVE YOUR DATA IN THE EXCEL. AND CLICK File Save As CSV(comma delimited) and save to ur system. Give file name as something like infosourcename_TEXT.csv
Now create Infoobject to load data
Go to Infosourceu2014Appln Componentu2014InfoObju2014SourceSystemu2014rightclick->create Infopackage
Step 2. Select the DataSource Material number (Master data), enter a description for the InfoPackage, and then click to continue.
Give infopackage description as Infopackage:InfoObj_ATTR
Now take care to select the first item in datasource and click continue
In the next screen click external data tab
Click client workstation
Datafileu2026.file name (browse to give the file u saved in ur system)
There will be an option to remove header data from file.remove 1 row.
File typeu2014csv file
Now click schedule tabu2014start dataload immediatelyu2014start.
In the same way
Go to Infosourceu2014Appln Componentu2014InfoObju2014SourceSystemu2014rightclick->create Infopackage
Step 2. Select the DataSource Material number (text)enter a description for the InfoPackage, and then click to continue.
Give infopackage description as Infopackage:InfoObj_TEXT
Now take care to select the second item in datasource and click continue
In the next screen click external data tab
Click client workstation
Datafileu2026.file name (browse to give the file u saved in ur system)
There will be an option to remove header data from file.remove 1 row.
File typeu2014csv file
Now click schedule tabu2014start dataload immediatelyu2014start.
Click the icon below admn workbench to go to monitor and check the load
Or you go back to Infosourceu2014Appln Componentu2014InfoObju2014right clickmaintain master data
Click execute
You can see the data load
Hope this helps!!! -
DS-BW:Data load called from BW failed after Source System program_id change
Hi,
In my BW 7.0 instance I have Data Services 3.2 as source system.
Some time ago I have changed instance of Data Services I am connecting to - I just changed PROGRAM_ID in RFC connection parameters for that source system.
Since that time when I am trying to execute infopackage to call a job I am getting following error:
OCI call <OCISessionBegin> for connection <xxxxxxx> failed: <ORA-01017: inv
where <xxxxxx> is Oracle database connection name for Data Services instance I connected originally.
What can be reason for that?
Regards,
akIn Data Services Server Manager on DS box there were configurations for job server I connected originally and for the other job server. After removing original config it works fine.
ak -
FM CRM_PRIDOC_READ_OW works in source system but not when executed from BW
Hello All,
I have extended an extractor in the source system by adding additional fields.
One of the FM I've used is CRM_PRIDOC_READ_OW. When I run an extraction test in the source system eveything works and data does populates into the new fields.But when I run the infopackage from the BW side, I get an error message which saids the transaction has been terminated. I've been able to trace and pinpoint the possible cause of the error. When I do not call this FM, the infopackage finishes but I do not get data for the new fields and when I do call this FM, I get the error.
Has anyone experiance this issue before?
Your assistance will be much appreciated. Here is a portion of the code I wrote:
loop at I_TABLE into l_s_ZASCRM_OPPT_I.
lv_guid = l_s_ZASCRM_OPPT_I-GUID.
lv_item_guid = l_s_ZASCRM_OPPT_I-ITEM_GUID.
call function 'CRM_PRIDOC_READ_OW'
exporting
iv_header_guid = lv_guid
importing
ES_PRIDOC = ls_pridoc.
loop at ls_pridoc-PRIC_COND into ls_pric_cond.
if ls_pric_cond-kposn = lv_item_guid.
case ls_pric_cond-STUNR.
when '40'.
l_s_ZASCRM_OPPT_I-zz_gpm_ttl_i = ls_pric_cond-kwert.
when '55'.
l_s_ZASCRM_OPPT_I-zz_gpd_ttl_i = ls_pric_cond-kwert.
when '60'.
l_s_ZASCRM_OPPT_I-zzfy_sp_i = ls_pric_cond-kwert.
when '70'.
l_s_ZASCRM_OPPT_I-zzfy_gpm_i = ls_pric_cond-kwert.
when '80'.
l_s_ZASCRM_OPPT_I-zzfy_gpd_i = ls_pric_cond-kwert.
endcase.
endif.
endloop.
append l_s_ZASCRM_OPPT_I to l_s_ZASCRM_OPPT_Itab.
clear l_s_ZASCRM_OPPT_I.
endloop
Thanks,
JeffHello Geo!
Thank you for your question. I think we mapped all the systems you show. Always the same error. Concerning your systems my transport log would say:
Source system R3DEV does not exist
We mapped this.
Any ideas? Is there maybe something in customizing to do what could be forgetten? The system is newly connected and there have never been a transport compounded to this source system before.
Best regards,
Peter -
Source System conversion for several production SAP
Hello all,
What kind of customizing in table RSLOGSYSMAP i have to do ?
We have 1 DEV and 9 production system P01, P02, .... P09.
In the table i must insert 9 lines, one for each production system ?
DEV -> P01
DEV -> P02
DEV -> P09
Or i insert only one line
DEV -> P0X
and i change the table before each of the nine transport ???
I have to transport the same order 9 times ?
Thanks for your precious help.
ChristopheCristophe,
I think this must be done on the target system where you will mention the source and target fields .
You do not have to manually enter the values into the table - you can find this under source system conversion defined in the transport connection .
I think the source system just gives it current logical systems and then the target system will do the conversion and hence it will not be 9 entries in your DEV environment but 1 entry each in your productive environment.
Also you cannot have two entries for the same logical source system in this table.
Arun -
Hi Gurus
Currently we are facing a big technical problem.
Our old sourcesystem client is 200 but it is changed to 400 now
But all the source system assignments for infosources are based on client 200
is there any solution for this issue
Thanks in advanceI think you can use BDLS program to convert the logical name of source system.
[Note 121163 - BDLS: Converting logical system names|https://service.sap.com/sap/support/notes/121163]
http://help.sap.com/saphelp_nw70/helpdata/en/d7/9c73631d6c11d2a56e0060087832f8/frameset.htm
and related notes
[Note 886102 - System Landscape Copy for SAP NetWeaver BW|https://service.sap.com/sap/support/notes/886102] -
Hi BI Basis Gurus,
Please can you suggest:
Our source System IP has been changed , is replication of datasources , infosources etc the only option?
Do we have any mapping method which saves us form replication .....
What should be the ideal steps to follow in this case
Please reply ASAP
ManishHi
Once you maintain your new ip address in the sm59, you may need to replicate the data sources...if still you get problem then you may need to activate transfer structure using program 'RS_TRANSTRU_ACTIVATE_ALL'...
if your source system id is changed then you need to maintain it in rsa1-tools--assignment of sources systems to source system ids....
Hope it helps
Thanks,
Teja -
IPhone speaker volume changes when connected to apple tv
If anyone has had this problem as well I would be interested but when I first got my iPhone 4S I realized it was loud. After disconnecting from the apple tv my max volume is lower. When I reconnect to the apple tv (by using it to play music from my phone) the my volume is louder again. Is this a bug or just my phone. Lol. And yes my volume is maxed out in both situations. It's almost like the speakers get boosted when connected to a different audio source.
You would need to connect the speakers to the apple tv if that is where the video is playing.
-
Icons changing when downloading reader, why?
When I download any version of reader, all my desktop icons change to PDF icons. Running Windows 7. What's happening?
I don't know the why, but this should be useful for correcting the problem:
http://helpx.adobe.com/acrobat/kb/application-file-icons-change-acroba t.html -
Does ATT icon change when not on their home network?
Since the ATT contract only allows a limited amount of off network phone use, does anyone now how to tell if I'm out of their network?
Right now, I'm in Vermont which according to AT&T's coverage maps isn't part of their home network, but my iPhone is showing AT&T with five bars.
Does the icon change to a roaming icon or to an extended network icon if you aren't in an AT&T home network?
- Hardy
http://www.pointatme.comBumping this since people now have more time with
iPhones. Has anyone seen the ATT network icon change
to roaming or anything when you are not on ATT's home
network? I think I live on the edge of an ATT and an
extended ATT network provider. I don't want to lose
my contract if I make too many calls on the wrong
side of town, but the icon never changes. If it shows
ATT then can I assume I'm on their home network?
Hardy Macia
http://www.pointatme.com/
Well, as long as you can call, you're either on their network or you're on one that has a roaming agreement. Cingular/AT&T has wide coverage, so I'm not sure where you'd find it. I'll be going to Europe soon (and I am going to get tons of questions from the locals I'm sure)--when I had other phones that always showed T-Mobile, when I got there it would show Orange, T-Mobile, Vodaphone, whatever. It was cool.
That will be the best test. -
Error when connecting SAP CRM to SUP using JCO
Hi Gurus,
we are trying to connect SAP CRM (v 7.0 Ehp1 SP3) to Sybase Unwired Server Platform 2.0 (installed on a 64bit workstation) using JCO.
Following the instructions into the following link:
http://infocenter.sybase.com/help/index.jsp?topic=/com.sybase.infocenter.dc01283.0200/doc/html/asc1229701333453.html
and given the informationfound into the forum, we performed the following steps:
1) Copy librfc32.dll (32bit) and sapjcorfc.dll (64bit, if not an error
is thrown) to "D:\Sybase\UnwiredPlatform\Servers\UnwiredServer\lib"
2) Copy librfc32.dll (32bit) and sapjcorfc.dll (32bit) and paste them
to C:\WINDOWS\sysWOW64
3) Copy librfc32.dll (32bit) and sapjcorfc.dll (32bit)
to 'D:\Sybase\UnwiredPlatform\JDK1.6.0_24\bin'
4) Copy sapjco.jar (32bit) to
"\Sybase\UnwiredPlatform\Unwired_WorkSpace\Eclipse\sybase_workspace\mobile\eclipse\plugins\com.sybase.uep.com.sap.mw.jco_<version>\lib"
5) Copy sapjco.jar (32bit)
to "D:\Sybase\UnwiredPlatform\Servers\UnwiredServer\lib\3rdparty"
With this configuration, we are able to connect to CRM from Eclipse (Sybase Unwired Workspace) but if we open Sybase Control Center, and we go to Domains -> Connections, we select CRD connection, we go to Properties then we click on "Test connection", SCC remains stuck with no responce. This issue does not allow us to connect to Sybase-SAP
using an Ipad application (the application remains stuck the same).
We also tried to install SapGui, but with no results. Did we place the right files into the right directories? Do you have any suggestions=
Thanks in advance,
FabioHi Pavani
I hope you solved your issue
Ey!.. Im also in a project where I had to connect BODS with SAP CRM, actually I havent even configured the connection, but I would really appreciate if you could share some valuable information with me.
BR
Belinda -
Error when testing connection from EP6.0 to ERP/2004
Hi this is Omar Poueriet and my case is the following:
Recently I finished to installed an EP60 SP19 based on Java+ABAP addin and everytime and then I logged on my EP system and define the corresponding settings for:
Connector property
User Management property
WAS property
ITS property
with their corresponding values at each stage, now everytime I try to test the connection in order to see that everything has gone fine, an error message is displayed at every defined connections, meaning the following:
<b><b>"HTTP/S connection failed. Make sure the protocol, host name, and user mapping are correctly defined."</b></b>
Please if any of you GURU's has any idea of what's going on this case, feedback ASAP, because I have some pendient task to complete based on EPortal 6.0 and ERP/2004 and that's STOPPED by the moment.
Awaiting for your feedback shortly,
Regards
Omar PouerietDon't worry if the connection tests fail. It is better to create an iView that uses the system and see if that works...
Cheers -
Hi,
We have some existing processes that use the SAP Business Connector
Is it possible to continue to use the SAP BC after an upgrade to MySAP ERP?
RegardsHello,
yes, it is possible, below you can find the official SAP statement regarding BC support:
"SAP note 571530:
SAP BC version 4.7 has been unrestrictedly available since June 2, 2003.
SAP makes SAP BC in versions 4.6 and 4.7 available to existing and new
customers according to the license agreement for the SAP BC. For details
of the agreement, see: http://service.sap.com/connectors.
Because the functionalities offered by SAP BC are or will in the short
term be provided by SAP NetWeaver components (for example, web service
functionality by SAP Web AS, IDoc conversion to an XML message by SAP
XI), no new version will be developed beyond version 4.7.
SAP will continue to provide new service releases (SR), bugfixes etc.
via http://service.sap.com/sbc-download for both versions, 4.6 and 4.7
of SAP BC.
SAP BC runs only on specific operating systems and JDK versions, see SAP
note 309834 about SAP BC implementation for more details. Note that it
is the responsibility of the customer to meet these requirements.
Any further details in regard to this strategy will be announced in this
note."
Regards, Christoph Claus -
SAP_CMINIT3 : rc=20 Connect to SAP gateway failed when connecting SAP CR
Dear SAP Gurus,
I have the follwowing issue when I try to access SAP Crystal Reports 2011 on my desktop.
I can access the SAP ERP 6.0 back-end system without problem, but when I try to connect to SAP Crystal Reports, as soon as I enter my login details, I get the following error message:
Logon Failed.
Details: SAP_CMINIT3 : rc=20 > Connect to SAP gateway failed
Connect_PM GWHOST=192.12.353.12, GWSERV=sapgw00, SYSNR=00
LOCATION CPIC (TCP/IP) on local host with Unicode
ERROR partner 192.12.353.12:3300' not reached
TIME Thu Oct 27 12:02:17 201
RELEASE 700
COMPONENT NI (network interface)
VERSION 38
RC -10
MODULE nixxi.cpp
LINE 2823
DETAIL NiPConnect2
SYSTEM CALL connect
ERRNO 10060
ERRNO TEXT WSAETIMEDOUT: Connection timed out
COUNTER 3
I can login to SAP Crystal Reports using other desktops, but cannot access using my own. This is the same for other people, they also cannot access using my desktop.
Thanks in advance, MarcHI Mark,
Are you and Ramish working together?
See this post for your answer: Connection keeps failing
Don
Maybe you are looking for
-
Trying to launch Flash builder 4 results in a crash.
Hi, After installing the Flash builder 4 any attemp to launch it results in a crash with the following message : A fatal error has been detected by the Java Runtime Environment: Internal Error (0xe06d7363), pid=2612, tid=2548 JRE version: 6.0_16-b0
-
How do I get CS6 to not distort color when using Lion and printing from Epson R2880?
Ever since I up-graded to CS5 , the color has been distorted. It is not an Epson Lion problem because printing from preview or iPhoto the color is perfect. Adobe has known about this problem since January 23, 2012. Their help people have taken over
-
Ni 6602 Card, Configuration in Register Level Programming
Hello, I want to do register level programming with the NI 6602 card . I want to use an x4 encoder reader and I want to use the continuous frequency generation. so i got the following tool to map the kernel space to the user space, so a simple shell
-
HELP my child deleted my photo album
child deleted photo album from phone i didnt have an SD card i didnt get one with the phone i have a Galaxy s 4. there has to be a way to recover the photos. i'm devastated all baby pictures are gone i cant stop crying
-
I was previously using Adobe Acrobat XI with no issues. All of a sudden on Sunday something crazy happened to my computer and the mouse had a mind of its own - started opening and closing things all the time, right clicking, jumping around etc.......