Source System In Deactivation Status

Hi,
Iam trying to connect R/3 Source System But it is in
Deactivation status.How to make active?
Kindly help me to sort out the issue.
Regards,
Chakri

Hi Chakri,
1. Check RFC connection in SM59 in both the system.
2. If RFC connection is fine Right click Source system -> Restore.
Also make sure your background of both the system has RFC related profile. This is very important to set the connection.
Regards,
Rohini

Similar Messages

R/3 connection to BIW - No Idocs arrived from the source system

Question,
Hi Team,
I have issues during loading attribute data from R/3 source system to BI,
I go to the path
Data Warehousing Workbench - Modeling window. In the DataSources view, my application component Group ##. On my DataSource i Create Info Package and save it,
Later I select the following options
Full Update = select
On the Processing tab page, select only PSA.
On the Schedule tab page, choose Start Data Load Immediately and start the data load.
Till here everything is in active version and saved, and connection to the source system is active and working fine.
However when I do loading I received following messages, what I observed in Monitor window,
Data was requested OK
Request still running
Diagnosis
No errors found. The current process has probably not finished yet.
System Response
The ALE inbox of BI is identical to the ALE outbox of the source system
or
the maximum wait time for this request has not yet been exceeded
or
the background job has not yet finished in the source system.
Current status
No Idocs arrived from the source system.
When I go to detail tab, under transfer section, I receive the following message
Data Package 1 : arrived in BW ; Processing : Selected number does not agree with transferred n
But when I actually go to PSA maintain section and select data and no of records, I can see the that data is loaded into PSA section,
But when I chose to run the transformation I donu2019t get data here,
Kindly help me to resolve this issue,
Regards,
BluSKy

Hi,
the BIW i am using , its compact BIW, which is in EXI, and i execute transaction /nrsa1 to go biw development workbench,
i am not sure about transactions settings about r/3 side,
could you plz throw some light on this issue,
regards
blusky

Info IDoc received with status 8 in BI but Data available in source system

Hello Experts,
I am loading Budget Period (attributes) into PSA in BI.
Budget Period data Loading Issue : No data available while loading. But source system ie ECC has data in that data source
Data source: 0PU_BDGTID_ATTR
This is full load.
I checked that whether I am making any mistake during data selection. I could not find any issue. Message while loading data into PSA (Yellow Traffic light)
No data available
Diagnosis
The data request was a full update.
In this case, the corresponding table in the source system does not
contain any data.
System Response
Info IDoc received with status 8.
Procedure
Check the data basis in the source system.
Already looked this thread and googled also.
Re: IDoc received with status 8.
Check points:
sm58 - NO issue
BD87 in ECC (RSINFO Idoc status: 03) -sucessful
BD87 in BI (RSINFO Idoc status : 53)
ST22 - NO issue
sm37 - Job is successful (I could see Idoc no in ECC source system in Job log)
I am not sure if I am missing any thing.
Thanks
Rana

Hi all,
I've got exactly the same issue with several extractors. I'm inialising the Master Data in a all new system, in the Quality the loads succeeded but in Prod it failed.
For instance with the basic DataSource "0FUNCT_LOC_TEXT", I've made the following test:
RS3 (R/3) - > 0 data
ST22 -> no short dump
WE05 (Idoc) - > everything is ok
I reactivated the Datasource in R/3 (RSA5) and then deleted it and replicated it in BW but the same issue occured.
Any ideas?
Thanks
jak

Rsa1 source system deactivation

hello ,
When i was working on rsa1 after creation of source system i right click the source system and pressed "RESTORE" but the object displayed deactivated symbol and trying to activate it but it still remain de activated
please can any one tell me the solution to the problm
on check it gives following error:
"Source system <name> is inactive" ID RSAR
Thank you in advance.

Hello,
Please check your RFC destination whether the source system already exists.
In the source system creation you assign the IP address instead of source system name. Please go through the screens (SM59).
If you have not used IP address you can ignore it.
Thanks
Chandran
Edited by: Chandran Ganesan on Nov 13, 2008 2:30 PM

Source system jobs in ready status

Hi Gurus,
I am Extracting data from R/3 to BW, when i execute the infopackage the jobs in source system are in ready status and they are not moving to active & finished status.
Is there any method to make the jobs in source system active manually.
Thanks & Regards,
chinnu.

When you execute the infocpackage you must use the inmediatly option for execution or programmed job ...in your case is assume that you use the orogrammed job....if you use this last option...you must setup your job with init time...if you do not use the start time and hour the job will never starts....this could be your problem

Transformation & DTP deactivated in source system

Hi,
I am trying to load the data from one BI System to another BI system. I am generating Export Data Source for that .
But the Issue is that when i am doing this, in the source system transformation & DTP got Deactivated.
Can any body tell why this happens?
( My source system is BI Production so it is not allowing me to do any changes)
Thanks in advance,
Vaibhav

Hi,
You might not be having Authorizations to edit the DTP and transformations in Production server.
If the production server is closed... run the program :RSDG_TRFN_ACTIVATE
Make sure to check out check sap note 1408161. For BW 7.0 it is SP25...
If your system is not having the SP25 its not possible to use the above mentioned program.
The other way is to re-import the DTP and transformation to Prodcution in new TR.
Regards
KP

Error while creating source system in BI: Modification not possible

Hi All,
We are about to move to production, and therefore it's necessary to create in BI the source system related to our ECC (R/3). While trying to perform this action from BI side we received the error message:
SAP system has status 'not modifiable'. Because of this, and following with known consultants practices we've changed the client to customazing but it still not working although the message at this time is: Changes to repository or cross-client Customazing are not permitted. We have also verified transaction SE06 but it's not possible to change the Cross-Application Component to Modifiable.
Did someone face with this same problem before?
Thanks to all in advance,
Regards,
José.-

Hi Rick,
I really appreciate your quick response. We followed your recommendation and could create the source system without problems. Thanks once again!
Best Regards,
José.-

Data load problem - BW and Source System on the same AS

Hi experts,
Im starting with BW (7.0) in a sandbox environment where BW and the source system are installed on the same server (same AS). The source system is the SRM (Supplier Relationship Management) 5.0.
BW is working on client 001 while SRM is on client 100 and I want to load data from the SRM into BW.
Ive configured the RFC connections and the BWREMOTE users with their corresponding profiles in both clients, added a SAP source system (named SRMCLNT100), installed SRM Business Content, replicated the data sources from this source system and everything worked fine.
Now I want to load data from SRM (client 100) into BW (client 001) using standard data sources and extractors. To do this, Ive created an InfoPackage in one standard metadata data source (with data, checked through RSA3 on client 100 source system). Ive started the data load process, but the monitor says that no Idocs arrived from the source system and keeps the status yellow forever.
Additional information:
BW Monitor Status:
Request still running
Diagnosis
No errors could be found. The current process has probably not finished yet.
System Response
The ALE inbox of the SAP BW is identical to the ALE outbox of the source system
and/or
the maximum wait time for this request has not yet run out
and/or
the batch job in the source system has not yet ended.
Current status
No Idocs arrived from the source system.
BW Monitor Details:
0 from 0 records
but there are 2 records on RSA3 for this data source
Overall status: Missing messages or warnings
- Requests (messages): Everything OK
o Data request arranged
o Confirmed with: OK
- Extraction (messages): Missing messages
o Missing message: Request received
o Missing message: Number of sent records
o Missing message: Selection completed
- Transfer (IDocs and TRFC): Missing messages or warnings
o Request IDoc: sent, not arrived ; Data passed to port OK
- Processing (data packet): No data
Transactional RFC (sm58):
Function Module: IDOC_INBOUND_ASYNCHRONOUS
Target System: SRMCLNT100
Date Time: 08.03.2006 14:55:56
Status text: No service for system SAPSRM, client 001 in Integration Directory
Transaction ID: C8C415C718DC440F1AAC064E
Host: srm
Program: SAPMSSY1
Client: 001
Rpts: 0000
System Log (sm21):
14:55:56 DIA 000 100 BWREMOTE D0 1 Transaction Canceled IDOC_ADAPTER 601 ( SAPSRM 001 )
Documentation for system log message D0 1 :
The transaction has been terminated. This may be caused by a termination message from the application (MESSAGE Axxx) or by an error detected by the SAP System due to which it makes no sense to proceed with the transaction. The actual reason for the termination is indicated by the T100 message and the parameters.
Additional documentation for message IDOC_ADAPTER 601 No service for system &1, client &2 in Integration Directory No documentation exists for message ID601
RFC Destinations (sm59):
Both RFC destinations look fine, with connection and authorization tests successful.
RFC Users (su01):
BW: BWREMOTE with profile S_BI-WHM_RFC (plus SAP_ALL and SAP_NEW temporarily)
Source System: BWREMOTE with profile S_BI-WX_RFCA (plus SAP_ALL and SAP_NEW temporarily)
Someone could help ?
Thanks,
Guilherme

Guilherme
I didn't see any reason why it's not bringing. Are you doing full extraction or Delta. If delta extraction please check the extractor is delta enabled or not. Some times this may cause problems.
Also check this weblog on data Load errors basic checks. it may help
/people/siegfried.szameitat/blog/2005/07/28/data-load-errors--basic-checks
Thanks
Sat

View the Idocs in Source System

Hello
I have triggered a ino package load to BI. Now the job is just hanging and is not bringing in any data. Please can someone tell me where can i view these idocs in the source system.
Thanks

Hi
IDocs at Source system --BD87 / WE19/WE20/WE30/WE02 are the Tcodes for IDOCs
Till42 Outbound Idocs after 50 Inbound Status Idocs.
You can even see the Idocs at Info Package -- Monitoring -- Environment - Idocs at Source system.
Check your RFC at SM58/SM59 -- If the Queue Stuck -- Execute LUWs Manually.
When the IDOCs are Taking time to process it is always better to Make the yellow request to Red and Delte the Request and Go for Repeat .
Hope it helps

Error message from source system

Hi All,
We have an infocube and ods which is being loaded from another ods. This is included in a process chain.
In the process chain the Infopackage execution step has failed. When I right click and go for display messages, I found the following message in Messages tab:
Error message from the source system
Diagnosis
An error occurred in the source system.
System response
Caller 09 contains an error message.
Further analysis:
The error occurred in Extractor .
Refer to the error message.
Procedure
How you remove the error depends on the error message.
Note
If the source system is a Client Workstation, then it is possible that the file that you wanted to load was being edited at the time of the data request. Make sure that the file is in the specified directory, that it is not being processed at the
And in Indiv Messages tab,
Delta upload is only possible after successful initialization.
Errors in source system.
I tried to update the data targets from the initial ODS manualy but in vain.
Any Help is awarded with points.
Thanks
AP

Hi,
Goto Info pack -> on menu bar select scheduler -> select init options for source system -> one request with green status -> select it and click on delete symbol , it will delete the init. you can cross verify this in the base ODS where you dint find data mart status(after refresh). now select init delta process under that select init without data transfer and schedule the load it will update one record and init flag to your source ODS.
Note: if the last request is not updated from soruce ods to targets for that also you will find data mart status for this select the particular data mart -> click on delete symbol it will delete for the particular request (if it is updated to target it will not allow you to delete) then do delta load it will update the request which is not loaded from source ods to next targets.
Regards
Sankar

Error in Source System while running the Full Load

HI Experts,
We are using 0CRM_UT_SRV_CONT_I datasource from CRM to extract data.
It is giving error while running the full load as 'Error Occured in Source system' with messaage Number : RSM340.
I want to mention certain points here:
1) In RSA3 its running fine.
2) Connection between BW and CRM system is OK.
3) We have replicated datasource and send active veriosn from Dev system.
4) When I run Init without data, Init set sucessful with entry in RSA7 in CRM.
5) Delta run fine with green status.
6) As source system is static client, hence do data for delta.
The Main issue happens when we run either the Full load or Init With Data transfer.
Kindly suggest.
Thanks
Mayank

Hi Mayank,
see in source system (CRM) with transaction SM21 and ST22 the error log and and then you let us know.
Charly

Job is not running in Source system.

Hi Experts,
One issue I have because of this I am not able to load data into Data sources.
I am in BI 7.0 environment.
when I execute infopackage, total and techinical status are in yellow.
I found in R/3 Job is not running, based on this statement in SM37. from the fallowing.
Call customer enhancement EXIT_SAPLRSAP_001 (CMOD) with 0 records
Result of customer enhancement: 0 records
IDOC: Info IDoc 2, IDoc No. 3136, Duration 00:00:00
IDoc: Start = 14.05.2009 07:23:39, End = 14.05.2009 07:23:39
Synchronized transmission of info IDoc 3 (0 parallel tasks)
IDOC: Info IDoc 3, IDoc No. 3137, Duration 00:00:00
IDoc: Start = 14.05.2009 07:23:39, End = 14.05.2009 07:23:39
Job finished
Job satrt time and end time are same, so job is not running in the sourcesystem, am i right. let me known if i am worng.
It is Standard Data source but in the above statement becasue *result of Customer enhancement:0 records.*
please help me to reslove this issue to load data into BI.
1. what I have to do to run job in source system side.
2. should I take any help from Basis.
Regards
Vijay
Edited by: vijay anand on May 14, 2009 3:02 PM
Edited by: vijay anand on May 14, 2009 3:04 PM

Hi Rupesh,
in RSA3 data is availbale,
but it is not coming to BI,
Messages from source system
see also Processing Steps Request
These messages are sent by IDoc from the source system. Both the extractor itself as well as the service API can send messages. When errors occur, several messages are usually sent together.
From the source system, there are several types of messages that can be differentiated by the so-called Info-IDoc-Status. The IDoc with status 2 plays a particular role here; it describes the number of records that have been extracted in a source system and sent to BI. The number of the records received in BI is checked against this information.
the abovemessage I am getting in details tab.
Regards
Vijay

Error in source system while extracting the data from R/3!

Hi,
i had created FM and extract strcucture in R/3 .
using the above two, i had created data source using RSO2 T code.
when i checked the extractor ( RSA3 T code) in R/3 it was working fine .
(status messege displayed as 1000 records selected).
then i assigned this data source to infocurce and creted info cube using the same info source.
but when i schedule the info package it is syaing in the monitor screen "error in source system".
what could be the problem?
Thanks,
Ravi

Hi
trhese are the possiblies
1.first check the source system connection and find if there is any error in it.
2.Go to sm37 and find whether the request is completed or not if its terminated find out the time. how long does it takes to complete the process.
3.once again relicate the data source and find whether is it again extract data.

Error in Source System While Uploading Data from ODS to Data Target

Hi All,
Iam getting Following Error while Uploading data from ODS to Data Target
a) Error in Source System.
b)DataSource 80MKT_DS01 has to be replicated (time stamp, see long text)
Message no. R3016
Diagnosis
DataSource 80MKT_DS01 does not have the status of the source system in the Business Information Warehouse.
The time stamp in the source system is 21.06.2005 07:31:33.
The time stamp in the BW system is 27.11.2004 17:41:45.
Regards,
Chakri

This generally occurs when you change the data source or enhance the data source or the coonections to the datasoiurse are broken. To resdolve thius sort of errors just
1. Check for the coonect between the sourse & target systems
2 . Replicate the data sourcses.
3. Acivated TR,UR,& the rest of the flow But check in the source system if the structre is modified & is so do the changes in the IS , TR,UR correspondingly & the try to load .Hoppe it allows you to load .
Thanks ,
PSG

ERPi Intialize Source System is not extracting any chart of accounts.

Hi Gurus,
I have an issue while Initializing Source system in ERPi. Any help fixing this issue is greatly appreciated.
Issue is, When i Intialize source system in ERPi, its just kicking off only one scenario in ODI. And when i browse to process detail to check the status, its still showing as running.
But i don't see any scenarios in ODI in running state.
So, obviously we can guess it didn't go to that far extent to show the chart of accounts.
So, here my questions is:
1. I believe there should be multiple Scenarios which should have been kicked of in ODI. But why only one Scenario have been kicked off?
2. And how long will Source Intialization process take.
Version of software using (ERPi- v.11.1.2.2) and ODI (v.11.1.1.3) Source System (EBS v.11i)
Any help is greatly appreciated.
Thank you,
Mike.

Totally agree with you.
Found this out after digging more into the issue. Finall passed through this issue.
Yes, i Imported the Master and Work Reps which we will get as a part of FDM Installation.
Surprising but true that ODI V.11g is only supported for Hyperion system greater than V.11.1.2.1.501.
Also, by any chance do you know any Knowledge base or forums where we can find good material for Erpi Implementation, like Tips or pitfalls to avoid in Erpi Implementation.
I know this is one of the good place.
Found that admin guide doen't fully cover everything.
Thank you,
Mike.

Source System In Deactivation Status

Similar Messages

Maybe you are looking for