Source system in Responsibility TAB
Hi All
I am finding difficulty to know exact source system (product responsibilty). I could see lot of text.It might be good If sap would have maintained Logical system here instead of this Source system text ,I want to know the correct text according to logical system.
Any help is appreciated.
Muthu
Hi Muthurama,
The texts that are displayed are the names of the logical systems maintained in your system. Probably you can rename than as <LOGSYS - LOG SYS NAME> so that it helps you to identify the systems correctly.
Even you can maintain the logical system name for the logical system text. This would solve your problem.
T-Code: BD54.
Best Regards
Kathirvel
Similar Messages
-
Initialisation option for source system in schedular tab
What initialisation option for system in schedular tab signifies? Does it acts as pointer and points to the last record loaded in cube or ods?
Hi....
Welcome to SDN..........
Initialisation option for source system in schedular tab........
shows to you all the init you made for a specific datasource/sourcesystem...if you find a row here, it means that the init channel is active and you can load delta for that specific flow.....
Initialization may with data transfer or without Data Transfer.......If you do with data transfer it will set the init flag............as well as it will fetch the data from set up table...........if you do without data transfer it will only set the init flag.....it will not fetch any records.........As soon as this init flag get set.......delta queue will get generated in the source system........after that any changes or new records will go to the delta queue.............So initialization load will be followed by delta load......
When you have to reinit, first of all you have to delete this row and then request a new initial load, otherwise the system cannot allow to perform a new init (with overlapping condition) if you don't deete the previous one....
Hope this helps
Regards,
Debjani....... -
BW - Source System in wrong TAB
Hi SAP BW Gurus,
I am connecting my SAP BW to a new R/3 Source System, but when i create the new system in RSA1 -> Source Systems, despite using the right click of mouse over the TAB SAP, when the Source System is create he apears on the TAB BI.
What i do wrong?
There is any impact of living the source systems like this?
What can i do to place de R/3 Source System in the right TAB (SAP)?
Thanks in advanced,
Pedro MartinsHi Pedro,
this has no impact and you can ignore it. When you look in table RSBASIDOC you will see that the SRCTYPE is not 3 but something else (D I guess).
This column is only relevant for the way the system is displayed in RSA1, so it does not really matter.
Best regards,
Ralf -
Initialization option for source system in schedular tab
SAP BW Gurus:
Please help me with this question.
This is a new system setup. I used initilization option doing the two years of data loads. I loaded eight loads with each load for a quarter's data.
Then I found there are some loading issues with one load. So, I need to delete that load and reload again.
To do that, i need to delete that particular load in the initialization request.
When I highlighted that request and delete, there is a window pop up saying:" There are active init selections in source system for this data source. Therefore, only ALL init selections can be deleted at once."
If I choose "no", I couldn't delete that particular package. Then, just for the sake of trying, I click on "yes", then all the 8 initization requests are gone!!!
Now, I got two questions:
1. If all the requests are gone, does it mean, I have reload everything again for initilization, ?? (it will take days to do it!!) Now i have two years of data already in my cube and DSO. This is version 7. But I do need to schedule Delta process later.
2. If I have eight requests, am I able to delete only one of them?? What does the question i listed above mean?
Thanks so much, guys!!Hi,
System maintains only one delta queue for a datasource irrespective of ...number of inits... which is done from the source system to the target system and this you can see in RSA7.
You can do init with data for any number number of selections but the delta for all those selections will be combined and will present in one queue.
If you delete one init request it will delete the whole delta queue as all these request share the same delta queue and therefore all the init selections will go off.
You should be careful when you do this.
Now since all the delta is lost and if you can find a way to load the lost delta like doing a full repair on created on or changed on date... then you can just as suggested...but on the safer side I would suggest to the repeat the process or as mentioned in the OSS notes.
Thanks
Ajeet -
Both Source system and BI system under BI tab not comming under SAP tab
Dear Experts
we have installed ECC6.0EhP4 ABAP and Netweaver BI7.0EhP1 ABAP,with AIX6.1,Oracle11G, I am trying to make connectivity between two system
its done successfully,But I am facing following error
1.in BI and ECC i am seeing source system and BI system under BI tab, its not coming under SAP tab,and BI consultant saying they are not able to extract the data from ECC ,they want source system Under SAP tab,how to solve this
2.In BI system they unable to execute the query ( I have applied GUI7.20 BI patch and Query patch) for this do we need JAVA stack?? kindly advice me
Regards
krishna
Edited by: krishna murthy on Mar 31, 2011 8:36 AMthank you very much after gone through that Snote 1087980
problem got solved
Enter the following values
I_BIW_LOGSYS GDVCLNT200
I_OLTP_LOGSYS GDVCLNT200
I_FORCE_DELETE <X>
< DO NOT ENTER ANY VALUE IN THE FIELD - RFC target sys !!!!! >
Go to RSA1-> Source systems in the BI system connected to the ECC
system.
Select the ECC source system and select RESTORE in the right click
menu.
thanks
regards
krishna -
Source system not Active error while installing BI content cube
Hi.,
When I try to install the BI content cube, In logs it is showing the error message as "Source client not Active". I activated the source system in modelling tab. Still the problem continues. In source system assignment of BI content the source client is also checked. Please give me a solution.Hi Selva,
If you want to select only infocube, select "Only necessary objects" in grouping. If you want everything related to Info cube, then system will collect data source also and for that it will check if you are authorized in source system. Please check if the source system is connected to BI or you can do one thing activate the data source in source system and replicate it in BI.
Regards,
Kams -
R/3 Source system under BI Folder in source system tab
Dear ALL,
i had created R/3 Source system under the context menu of SAP folder in Source System. but after creation it is reflecting under BI folder and SAP Folder is empty, eg:DEVCLNT100 it is shown under SAP BI FOLDER.please help me out in this regards
Thanks in Advance
Thanks & Best Regards
SyedHi,
This document related to SAP BI BASIS might be helpful.
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/007af9a7-e48e-2a10-5c85-fcac22d58e82
regards,
Pruthvi R -
Prolblem while replicating datasources in BW, source system tab in modellin
hi friends,
I have a problem. we are using SAP NetWeaver 2004s and we are implementing for the first time. The problem is we have activated the datasources of 0FI_AR_4, 0FI_AP_4, 0FI_GL_4 from delivery version RSA5, After activation we checked in RSA6, and even the data is available we checked in RSA3 also. when we go to SAP NetWeaver 2004s to replicate the datasources, i went to source system and after double clicking on the Source system a new datasource screen is opened, there i found the datasource to replicate and i selected the datasource context menu there i got a option to replicate metadata i clicked it.
Here the real problem is coming i am getting a NOTEQUALLY symbol is coming (msg is M Version is different from A version).
After this i went to Business content and acvtivate related infocube and related infosource. I click on the infosource and assigned the SS and ther i am not getting the datasource, can u any one please guide the entire process in BW to replicate the Datasources from SS.
Kindly Reply me ASAP
PAVAN KUMAR KHeads up...
<a href="https://www.sdn.sap.com/irj/sdn/thread?forumID=154&threadID=145443&messageID=1640573">https://www.sdn.sap.com/irj/sdn/thread?forumID=154&threadID=145443&messageID=1640573</a>
<a href="https://www.sdn.sap.com/irj/sdn/thread?forumID=154&threadID=171086&messageID=1917978">https://www.sdn.sap.com/irj/sdn/thread?forumID=154&threadID=171086&messageID=1917978</a>
<a href="https://www.sdn.sap.com/irj/sdn/thread?forumID=154&threadID=163462&messageID=1859808">https://www.sdn.sap.com/irj/sdn/thread?forumID=154&threadID=163462&messageID=1859808</a>
Hope it Helps
Chetan
@CP.. -
Error message from source system
Hi All,
We have an infocube and ods which is being loaded from another ods. This is included in a process chain.
In the process chain the Infopackage execution step has failed. When I right click and go for display messages, I found the following message in Messages tab:
Error message from the source system
Diagnosis
An error occurred in the source system.
System response
Caller 09 contains an error message.
Further analysis:
The error occurred in Extractor .
Refer to the error message.
Procedure
How you remove the error depends on the error message.
Note
If the source system is a Client Workstation, then it is possible that the file that you wanted to load was being edited at the time of the data request. Make sure that the file is in the specified directory, that it is not being processed at the
And in Indiv Messages tab,
Delta upload is only possible after successful initialization.
Errors in source system.
I tried to update the data targets from the initial ODS manualy but in vain.
Any Help is awarded with points.
Thanks
APHi,
Goto Info pack -> on menu bar select scheduler -> select init options for source system -> one request with green status -> select it and click on delete symbol , it will delete the init. you can cross verify this in the base ODS where you dint find data mart status(after refresh). now select init delta process under that select init without data transfer and schedule the load it will update one record and init flag to your source ODS.
Note: if the last request is not updated from soruce ods to targets for that also you will find data mart status for this select the particular data mart -> click on delete symbol it will delete for the particular request (if it is updated to target it will not allow you to delete) then do delta load it will update the request which is not loaded from source ods to next targets.
Regards
Sankar -
Error in code page mapping for Source system whil loading the data from ECC
HI Gurus,
I am working in a implementation project, Recently our BI sand box is up, when i am doing my load from 0comp_code_attr it is throwing an error "Error in code page mapping for source system"(This is my first load from ECC).
In details tab it is showing as the data is sent from the source system but the data is not reaching to the PSA.
Please let me know if there are any settings needs to be made.
Many thanks in Advance
JagadeeshHI V,
Thanks for your quick response. I did it but it didn't resolve the issue. since the system id which i am having is 3 digits(LEC) but there it is taking only 2 digits, so i clicked on the button called Propose system ids, it has praposed LE, but the issue is stil there.
Do we need to do any settings in LBWE??
Thanks and Regards
Jagadeesh -
Error Loading Hierarchy Error when updating Idocs in Source System
Hello Friends,
I am loading hierarchy data using Info pac into 0FUNDS_CTR . I have selected a hierarchy under hierarchy selections tab in the Info pac .
All Partner profiles in WE20 seems OK . But When I loaded data , throwing errrr message as below
Error when updating Idocs in Source System
Diagnosis
Errors have been reported in Source System during IDoc update:
System Response
Some IDocs have error status.
Procedure
Check the IDocs in Source System . You do this using the extraction monitor.
Error handling:
How you resolve the errors depends on the error message you get.
When I checked in TC WE05 says that IDoc: 0000000000355113 Status: Error during syntax check of IDoc (outbound) with status 26 .
Please advice .
Many thanksHi Krishna4bi,
Actually we will monitor idoc status in BD87 in SAP BI As well ECC , while extracting the data from source sytem if any idoc struck we will manually process in BD87 , But you are telling that while loading the datasource the error occurred , so please check once in ECC side . Otherwise see how many packets are still process, make it red that infopackage and do manually update.
Hope it helps,
By,
Praveen Yagnamurthy,
SAP BI Consultant,
Blue Marlin Systems-INDIA.
http://bluemarlinsys.com/bi. -
An error occurred in the source system when running infopackage
Hello,
I am using 0CO_PC_PCP_03 (Product Cost Planning: Itemizations Costing) and cube 0COPC_C10 (Exploded Itemization) in BI. RSA3 extractor checker shows that there is data if you put in a period.But as soon as I run the infopackage I get error :
Error message from the source system
Diagnosis
An error occurred in the source system.
System Response
Caller 09 contains an error message.
Further analysis:
The error occurred in Service API .
Refer to the error message.
Procedure
How you remove the error depends on the error message.
And i did put in the period in the internal formatfor FROM and TO in the selection tab on the infopakand but I am still getting the same error.
And when i go into details it gives me " Error occurred in the data selection "
Please assist
ThanksI followed what you & Tarun advised and it shows the job as finished.Also this is what the log read:
Date Time Message
04/03/2009 12:49:29 Job started
04/03/2009 12:49:29 Step 001 started (program SBIE0001, variant &0000000000160, user ID DEVERP100)
04/03/2009 12:49:29 Asynchronous transmission of info IDoc 2 in task 0001 (0 parallel tasks)
04/03/2009 12:49:29 DATASOURCE = 0CO_PC_PCP_03
04/03/2009 12:49:29 RLOGSYS = DEVBI100
04/03/2009 12:49:29 REQUNR = REQU_4DCA7N474P53QS8FJQ0RAKOW5
04/03/2009 12:49:29 UPDMODE = F
04/03/2009 12:49:29 LANGUAGES = *
04/03/2009 12:49:29 *************************************************************************
04/03/2009 12:49:29 * Current Values for Selected Profile Parameters *
04/03/2009 12:49:29 *************************************************************************
04/03/2009 12:49:29 * abap/heap_area_nondia......... 2000683008 *
04/03/2009 12:49:29 * abap/heap_area_total.......... 2000683008 *
04/03/2009 12:49:29 * abap/heaplimit................ 40894464 *
04/03/2009 12:49:29 * zcsa/installed_languages...... 1NEFDIJLPS *
04/03/2009 12:49:29 * zcsa/system_language.......... E *
04/03/2009 12:49:29 * ztta/max_memreq_MB............ 2047 *
04/03/2009 12:49:29 * ztta/roll_area................ 3000320 *
04/03/2009 12:49:29 * ztta/roll_extension........... 2000683008 *
04/03/2009 12:49:29 *************************************************************************
04/03/2009 12:49:29 Synchronized transmission of info IDoc 3 (1 parallel tasks)
04/03/2009 12:49:29 IDOC: Info IDoc 3, IDoc No. 6812, Duration 00:00:00
04/03/2009 12:49:29 IDoc: Start = 04/03/2009 12:49:29, End = 04/03/2009 12:49:29
04/03/2009 12:49:29 Job finished -
Error in loading data into PSA from source system.
Hi Experts !!!
Good morning .
I am trying to load data from SRM source system into BI system.When I execute infopackage,the data is not loaded into PSA and status of the process immediately becomes yellow.After sometime it gets timed out and converts to RED.When I checked the error documentation I found that the iDOCS response was not received from the source system.Detailed error is as below.
System Response
There are idocs in the source system ALE outbox that did not arrive in the ALE inbox of BI.
Further Analysis
Check the TRFC log
you can access this log using the wizard OR menu path "Environment > Transact. RFC> In the source system
However,I was not able to navigate to this path.I think if I can navigate to this path,I can manually push IDOCS from source system to BI system.
Regards,
Mandar.Hi,
Check the DataSource in RSA3, if it is working fine and able to see the data in RSA3, there is no problem in DS level, then check the Mappings and any routines in BW for that DS, if this is also fine then check the below options.
See Dumps in ST22, SM21 also.
Check RFC Connection between ECC and BW systems, i.e. RSA1-->Source System->Right Click on Source system and Check.
You must have the following profiles to BWREMOTE or ALEREMOTE users.So add it. Bcoz either of these two users will use in background to get extract the data from ECC, so add these profiels in BW.
S_BI-WHM_RFC, S_BI-WHM_SPC, S_BI-WX_RFC
And also check the following things.
1.Connections from BW to ECC and ECC to BW in SM59
2.Check Port,Partner Profiles,and Message Types in WE20 in ECC & BW.
3.Check Dumps in ST22, and SM21.
4.If Idocs are stuck i.e see the OLTP Idoc numbers in RSMO Screen in (BW) detials tab see in bottom, you can see OLTP Idoc number and take the Idoc numbers and then goto to ECC see the status in WE05 or WE02, if error then check the log else goto to BD87 in ECC and give the Idoc numbers and execute manually and see in RSMO and refresh.
5.Check the LUWs struck in SM58,User Name = * (star) and run it and see Strucked LUWs and select our LUW and execute manually and see in RSMO in BW.
See in SDN
Re: Loading error in the production system
IDOC getting struck at TRFC (SM58)
1.Reorg of table (ARFCSSTATE )
2.Incraesing the resources in the system (no of processes and memory ) , as this issue happens owing to this.
Source system tries to send TRFC to target and if there are no WP's available it will come to Transaction Recorded state, and form here it will not try to send this TRFC.So you have to execute this manually.
Also we can increase the timeout parameter so that it can try few more times to send before actually it comes to recorded state.
Regards,
Suman -
An error occured in the source system
My process chain has been doing FULL load for COPA data in a ODS. It failed today saying
Diagnosis
An error occurred in the source system.
System response
Caller 09 contains an error message.
Further analysis:
The error occurred in Extractor .
Refer to the error message.
When I click on indiv. Message tab I get "Job in source system terminated - Requests is set to red"
What should I do to resolve the problem.For Source system R3 :
This particular problem "Job terminated in the source System" occurs when there are long running jobs in the backend.
In the monitor tab,
Environment --> Job Overview --> In the source system.
After logging into the source system, click execute
Check the status of the job i.e. active or failed.
Check the job log for the same.
If its " DBIF_SQL_..... " sort of error, then in this case, delete the request from the data target and reload again.
The load would be successful
Caller 09 error normally occurs when the source from which the datasource is picking up data may be in use on the R3 side.
Hope this helps!!!!!!! -
R/3 connection to BIW - No Idocs arrived from the source system
Question,
Hi Team,
I have issues during loading attribute data from R/3 source system to BI,
I go to the path
Data Warehousing Workbench - Modeling window. In the DataSources view, my application component Group ##. On my DataSource i Create Info Package and save it,
Later I select the following options
Full Update = select
On the Processing tab page, select only PSA.
On the Schedule tab page, choose Start Data Load Immediately and start the data load.
Till here everything is in active version and saved, and connection to the source system is active and working fine.
However when I do loading I received following messages, what I observed in Monitor window,
Data was requested OK
Request still running
Diagnosis
No errors found. The current process has probably not finished yet.
System Response
The ALE inbox of BI is identical to the ALE outbox of the source system
or
the maximum wait time for this request has not yet been exceeded
or
the background job has not yet finished in the source system.
Current status
No Idocs arrived from the source system.
When I go to detail tab, under transfer section, I receive the following message
Data Package 1 : arrived in BW ; Processing : Selected number does not agree with transferred n
But when I actually go to PSA maintain section and select data and no of records, I can see the that data is loaded into PSA section,
But when I chose to run the transformation I donu2019t get data here,
Kindly help me to resolve this issue,
Regards,
BluSKyHi,
the BIW i am using , its compact BIW, which is in EXI, and i execute transaction /nrsa1 to go biw development workbench,
i am not sure about transactions settings about r/3 side,
could you plz throw some light on this issue,
regards
blusky
Maybe you are looking for
-
Experts, I am executing BW report in Bex ,When i execute After entering in the parameters ,it is giving Application error messages . Error an exception with typeCX_SY_DYN_CALL_ILLEGAL_TYPE Occured ,
-
What can I do to see items that I have purchased but upgraded to iTunes Plus? They are not showing in my iCloud as purchased, but I still can see the original protected versions from old backups. The original was downloaded with my iMac but the compu
-
Thunderbolt to firewire 800 coverter vs. usb 2.0
Have an external hard drive that has firewire 800 and USB 2.0. Trying to decide if the firewire 800 to thunderbolt adapter or using the straight usb is the better connection. Drive holds my iTunes Library and VM Fusion "drive". Any ideas?
-
Look on my desk top HP running windows 7/ 64bit. I can not for the world of me get ITunes to open up at all and have tried all .??
-
Cannot save form although I've enabled the rights using Acro 8 Pro
I created a form in Acrobat 8 Pro (using the 30 day trial, trying to see if I can do it first as suggested I can before I buy). I prepared the form in the design mode, I enabled it with save (and other) capabilities for Reader (under the advanced men