Source system is already exist

Hi,
We are facing an issue with source system creation.
we have already created the RFC connetions between BW & ECC and there is no issue in RFC.
while creating the source system in RSA1 it giving the error Source system is already exist.
But there is no entry for the source system in tables RSLOGSYSDEST & TBDLS.
Both sides systems are opened inSCC4 & SE06.
Please help me out on this issue.
Thanks
Aravinda

Are you sure it's saying the sourcesystem exist? Isn't it saying the connection 'XY' already exists? ('XY' may be formed by other letters).
You should check in the table RSBASIDOC in both BW and source system if you can see any entry already referring to the the logical name you are trying to create or the connection/TSPREFIX being used (the 'XY').

Similar Messages

Transporting Process Chain - error Source system does not exist

Hi,
I tried to transport a local PC by itself (not including its main meta chain) since I have only done modifications in the local PC only. In the PC, there are PSA Processing, ODS Processing, ODS Activation, ABAP Program w/ variants and Infocube Rollup.
However, I got the following transport error: Source system does not exist
=======
Diagnosis
Source system is not known.
System Response
The imported data for DataSource was deleted again because the referenced source system does not exist and no mapping is defined in table RSLOGSYSMAP on an existing productive source system.
Procedure
Create the referenced source system in the Data Warehousing Workbench or define mapping to a known source system in table RSLOGSYSMAP.
You get to maintenance using Tools -> Conversion of the logical system names.
============
I have checked at the table RSLOGSYSMAP and all source system mappings are in order.
And the weird thing is, upon checking the PC itself in the transport-to box, I can activate it without any error.
FYI, we are currently upgrading to BI Accelerator. Am not sure if this could be one of the reasons.
Any inputs and tips are highly appreciated and will be rewarded with points accordingly.
Thanks

Hi,
This error is due to the fact that the
mapping table for the after import (RSLOGSYSMAP) is not correct maintained in PB7 system.
You need to maintain table RSLOGSYSMAP in each system
You can find the steps to do it in the attached note 127326:
o Maintain table 'RSLOGSYSMAP' in the target BW with view
   'V_RSLOGSYSMAP' and enter as 'original source system' the logical name of the source system in the source BW and as 'target source system' the logical name of the source system in the target BW.
   This maintenance is required since it allows the correct source system reference of the InfoSources to be transported.
This source system reference in turn is absolutely necessary to activate the transfer structure.
   Example:
   Source BW with source system AAA.
   Target BW with source system BBB where the source system AAA
   corresponds to the source system BBB.
   Entry in RSLOGSYSMAP in the target BW:
   Original source system: AAA, target source system: BBB.
   Give the DDIC user in the source BW in client 000 the
   authorization profile S_RS_ALL to create BW objects.
Cheers
Rajesh

Source system restore - Source system does not exist

Hello friends,
We have a problem. Now we have a new test system QA2. From BW system source system connection was configured for older test source system QA1.
We needed to route this source system to new system. I tried with changing RFC of QA1 to QA2 details.
Now, when i check RSA1 source system Check for QA1, i get this error :
Port 'A000000103 ' of type 'ALE ' does not exist
No destination exists to source system QA1
I can see this source system in RSA1 in BW. However, in WE21 port is not available now.
Please suggest.
I do not have to lose transfer rules/PSA tables..etc.
thanks
ashish

I get this when i try to restor connection :
Source system does not exist
Message no. RSAR175
Diagnosis
You have specified that you want to restore source system QA2. This source system is not known in BI.
System Response
The source system is not restored.
Procedure
Recreate the source system.
If the source system should be known to BI, the name of source system QA2 may be incorrect. Rename the source system and try the function again.

Transport Request got failed due to Source system does not Exist

Dear All,
I Have collected All data soruces which are related to R3 data sources and Flat File data sources...
After import the transport request it got failed due to Flata file source system does not exist in BI quality system.
But all data sources related to R3 and R3 Source system has been moved which are available in BI Quality sytem also.
why Flat File source and data source are moving.. why i am not sure it was throuing error message called Source System does not exist..
Thanks,
Ven

Dear Venkat ,
Go to Quality system .
Use RSA1 Transaction --> go to Tools --> Manage Source System :
Here you can map the entry of system ..
Second : go to Development system under RSA1> Transport Connection and click on Source system button first --> select your source system ---you can select multiple entry also ..collect your data source ( with before and after option ) and deselect which object you do not need ..And select collection mode to automatically ...
use the transport button to create transport request and release from development system .
I hope you will not get error in Q system .
If still facing error , Please let me know.
Regards
Vikas Sharma
Robert Bosch
Edited by: Vikas Sharma-Bosch on May 5, 2011 5:34 PM

Source System no longer exists

Hello,
I am trying to remove an object from my InfoSource communication structure and I am getting the following error:
The InfoObject 0REQ_DATE is still used in the following places:
In the transfer rules for DataSource 2LIS_11_VASCL Source System PCPRDC200
The source system that is mentioned is our production system and that source system does not exist on our BW Development box. (Its possible that in the past it got deleted as a source system from the BW Development box)
I'd be greatful if someone can help me with this problem?
Thanks,
Nick

Hello,
After searching the forums I found that running the report:
RSAR_TRANSTRUCTURE_CHECK
With the following parameters
InfoSource: 2LIS_11_VASCL
SourceSystem: PCPRDC200
in SA38 fixed the issue
I found this report in the following thread:
Deleting transfer rules
Thanks!
Nick
Message was edited by:
Nick Bertz

Trusted system entry already exists for system SOL

Hi,
Im trying to add a second trusted system with smt1 transaction but the thing is that i've already have an identical SID for another system so i get the "Trusted system entry already exists for system SOL" message.
is there any way to solve this??
thanks in advance.
regards.

In SM59 - in the RFC in question - Press "Technical Settings" tab - then press "Yes" to Load Balancing - this will populate the "Target Host" field.
Then make sure that you here enter the system data for the Target System (Default it will display the Host System data which you will need to replace)
Then go back to SMT1 - Press the "Create" button - and in the Wizard you enter the RFC connection as before... Now it should work.
Regards,
Lars

Source system does not exist (RSAR203)

Hi to all
I have a error in phase XPRA_EXECUTION in BI_CONT 704 add-on upgrade by SAINT transaction.
Start of the after-import method RS_DTPD_AFTER_IMPORT for object type(s) DTPD (Modo de entrega)
Source system CLNT100CED does not exist
Source system CLNT100CED does not exist
Source system CLNT100CED does not exist
Source system CLNT100CED does not exist
Errors occurred during post-handling RS_AFTER_IMPORT_D for DSFO L
The errors affect the following components:
BW-WHM (Warehouse Management)
I read the thread
XPRA_EXECUTION error in BI_CONT 703 patching
but don't work for me.
The sap Note 1271454 does not work for me becouse I already aply the SP.
SAP_ABA     701     0007     SAPKA70107     Cross-Application Component
SAP_BASIS     701     0007     SAPKB70107     SAP Basis Component
PI_BASIS     701     0007     SAPK-70107INPIBASIS     Basis Plug-In
SAP_BW     701     0007     SAPKW70107     SAP Business Warehouse
BI_CONT     703     0003     SAPKIBIIP3     Business Intelligence Content
I upgrede add-on BI_CONT to 704 SP 08, for this the SAINT aply patch SAPKIBIIO4 TO SAPKIBIIO9 (prerrequisite)
The error appear in SAPKIBIIP6
Any suggestions?
Many thanks and best regards
William Neira

Hi,
Had you checked the SAP Note " Note 955647 - BI_CONT 703:Information on Add-On Support Packages".
Seems like SAP has released two support pack
SAPKIBIIP6..........AOP      24.07.2007
SAPKIBIIP6 updated..AOP      07.08.2007........955647
and recommends to apply the Support pack released on 07.08.2007. Kindly check and update.
Regards
Valavan.SM

Transport Error: Source system does not exist. Message no. RSAR203

Hi,
after transporting from BI_DEVELOP to BI_TEST I get an error whil importing Datasources:
Source system ERP_DEVELOP_SOURCESYSTEM does not exist - Message no. RSAR203
Which is upon the first sight correct, because I got the followings systems, RFC's and BI Sourcesystem:
ERP_DEVELOP -> BI_DEVELOP with RFC & Sourcesystem ERP_DEVELOP_SOURCESYSTEM pointing to ERP_DEVELOP
ERP_TEST -> BI_TEST with RFC & Sourcesystem ERP_TEST_SOURCESYSETM pointing to ERP_TEST
Can I map in the transport ( and how) in a way that the transports do not fail ?
ERP_DEVELOP_SOURCESYSTEM to ERP_TEST_SOURCESYSETM
or
Do I need to setup in BI_TEST a Sourcesystem ERP_DEVELOP_SOURCESYSTEM pointing to ERP_TEST ?
Thank You
Martin
Edited by: Martin Sautter on Jul 25, 2011 12:59 PM

Hi Martin,
You have to maintain the transport connection between your ERP_DEVELOP and ERP_TEST
your transport path should be as below
BI_DEVELOP -
> BI_TEST
ERP_DEVELOP -
> ERP_TEST
1)Make sure you have FRC connection between BI_DEVELOP and ERP_DEVELOP, BI_TEST and ERP_TEST
2)check you have transport connection between BI_DEVELOP and BI_TEST,ERP_DEVELOP and ERP_TEST
Now you transports should not fail
Hope this helps
Regards,
Venkatesh

Source System Does Not Exist - Transport Problem

Hi
We have the next Landscape in BW 7.0 (Netweaver 2004's)
LRDCLNT300     is R3 DEV
LRQCLNT700     is R3 QA
LBDCLNT100     is BW DEV
LBQCLNT700     is BW QA
The connections are
LBDCLNT100 (BW Dev) use as source system        LRDCLNT300 (R3 Dev)
LBQCLNT700 (BW QA) use as source system        LRQCLNT700 (R3 QA)
In RSA1->TOOLS -> Conversion of Logical System Names
In Conversion of source system after the transport we have these entries
Source System                    Target System
LBDCLNT100 (BW Dev)         LBQCLNT700 (BW QA)
LRDCLNT300 (R3   Dev)         LRQCLNT700 (BW QA)
But when we transport an order from BW DEV to BW QA show the error "source system LRDCLNT300 does not exist"
Never made the conversion of source system after the transport.
Can you help us please.

Thanks Edwin
     I create a RFC for LRDCLNT300 (R3 Dev) in my BW QA system (Target System).
I try an order again but it didn't work, also I try to check 7.0 checkbox but I got the message "No entry exists for original source system LBDCLNT100 for 3.x object"
and I have to uncheck again.
I still have the same problem the objects are associated to R3 Dev, never make the conversion to R3 QA.

After transporting I get error "source system does not exist"

Hello all,
I have transported my objetcs to BW quality system and transported the data sources to r/3 quality and everything went fine. But now when I am trying to go through everything my update rules are inactive and when I get to infosource it gives me this error
"Source system ERJ100 does not exist."
Is there any importamnt step that I am missing why are the objects not recognizing the source system?
Thanks,

hi,
check the system mapping in rsal tools system mapping tab as lilly mention. check if the mapping is defined correct. see the link below
https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/docs/library/uuid/e883de94-0501-0010-7d95-de5ffa503a86
https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/docs/library/uuid/3010ba90-0201-0010-2896-e58547c6757e
Might help
Thank you
Qandeel

Cannot make changes t oDTP - Source system does not exist

Hi,
I cannot open my DTP to make changes. when I tried to double click I got this error
Source system X01CLNT001 does not exist
Message no. RSAR203
I have tried connection test from SM59 and there seems to be no problem.
How do I resolve this?
thanks

Goto RSA1 --> Source System --> right click --> Check.
Is it giving any error?
You can click on restore also and check if anything improves.
Also check whether datasource and transformation is active.
Edited by: Pravender on May 28, 2010 12:11 PM

Transport issue - Source system does not exist

Hi at all!
I've got a problem after transport from BW QA-system (EBW) to BW PRD-system (PBW). All transports got the same error message, that the Source System DEV500 doesn't exist. But DEV500 is the development R/3 system. How could it be? Because we didn't connect the DEV500 to PBW. We connected PRDCLNT100 (Productive R/3) to PBW. Where is the failure?
Thanks in advance for your help.
Christof

Hi,
DEV R/3 -
> QA R/3 -
> PROD R/3
DEV BIW -
> QA BIW -
> PROD BIW
Is the above one is your landscape? If so , you must had created the Transport requests in DEV BIW and imported them into QA BIW. And for that you had maintained the source system conversions in QA ABIW .
Now you want to import into PROD BIW. And remember that the orgin(source) of the trnasport requests is DEV BIW. So you need to maintain the Conversions in PROD BIW for conversion from DEV R/3 to PROD R/3.
With rgds,
Anilk Kumar Sharma. P

Source system does not exist

Hi all,
When i run an infopackage its getting failed throwing out an error
"An error occurred in the source system.
System Response
Caller 09 contains an error message."
I have replicated the Data source and when i try activating it i am getting the following errors
"Inconsistent user object XXXXXXX "
"Error saving DataSource "
"DataSource XXXXX could not be activated"
Help me out
Regards,
MADhu

Hi,
Might be some issue in Data Source when you replicating it in BW system.
Check RFC connections between the Source and Target.
Could you mention the error message clearly.
Reg
Pra

Source system in Production doesnt exists Error RC- 8

Hello experts!
We connected a second source system to our 7.0 BW. We transported from development to quality system and everything is fine. Now we want to transport to production and we got RC=8 and the message that our "source system does not exist"
First we checked our source system. It is ok. we can replicate datasources, load units and currencies. But when we want to transport something what is directly connected to the source system we got everytime a RC=8 because of source system. For sure, we checked our "Conversion of logical source systems names". We checked if the mapping from development to productive is correct many times but we can find no error.
Is there something I can not see?
I tried to transport Transformations, DataSource Migration, other things connected to 7.0 and 3.x DataSources. Nothing works. I transported a transformation got a little different error like no rules exist because missing infoobjects in source or target or they are not activated. But target seems to be ok and source also have the fields.
Also I have searched the previous threads I have got what I have done but for sure some thing I am missing !!
Any Ideas???
Best regards,
Yash

Thanks Murali for your prompt reply,
I have manged to do the conversion settings again and now the source system client problem subsides !!!
But when I import the requests again from QA to PRD it says that some DS cannot be activated due to inconsistency in CRM production system. Actual message is.
Start of the after-import method RS_ISMP_AFTER_IMPORT for object type(s) ISMP (Activation Mode)
Mapping between data source 0CRM_SRV_CONTRACT_H and source system PC4CLNT400 is inconsistent
Start of the after-import method RS_ISCS_AFTER_IMPORT for object type(s) ISCS (Activation Mode)
InfoObject Source System of Preceding Doc. ( 0PRELOGSYS ) is not active, total of 4 inactive InfoObjects
InfoObject Exchange Rate Date ( 0CRM_EXCDAT ) is not active
InfoObject Exchange Rate Type ( 0CRM_EXCTYP ) is not active
InfoObject Quotation GUID ( 0CRM_QUOGUI ) is not active
InfoObject Source System of Preceding Doc. ( 0PRELOGSYS ) is not active
InfoObject Text of CO Document Line Item ( 0CO_ITEM_TX ) is not active
InfoObject Text of CO Document Line Item ( 0CO_ITEM_TX ) is not active
InfoObject Text of CO Document Line Item ( 0CO_ITEM_TX ) is not active
InfoObject Text of CO Document Line Item ( 0CO_ITEM_TX ) is not active
is that due to the DS .. some are in BI 7 cannot be mapped with 3.X ?
I will be importing a new request all the way from DEV to QA and Then in PRD as of now to see the inconsistency once again.
Cheers
Yash

How to replace a source system with another in BW

Hello experts,
I've read many topics dealing with my customer's need, but I still can't find the solution.
My landscape is the following one :
ECC6 with DEV, QUAL and PROD
BW with DEV and PROD
BW DEV source system is ECC6 DEV, I need to change it to ECC6 QUAL
A lot of work has already been done, and I'd like not to lose it changing the source system.
Datasources are the same in ECC6 DEV and QUAL.
This is not a system or a client copy, it is really a source system switch.
The new source system is already created (both DEV and QUAL ECC6 are available in "source systems" in RSA1), and I tried to use BDLS tcode
In the "old logical system name" I choose my current source system and in "new logical system name" I choose the one I now need to use.
System answer is : "The logical system name ECC6 QUAL already exists"
Obviously I did something wrong, but can't figure what.
Is there any action to perform before BDLS ?
Any help is appreciated, and points will be given.
Guillaume P.

Thanks for your answer,
"relevant object" means for you datasources, transfer rules and transformations ?
With the grouping option "Save for system copy" I can't take easily all datasources, and others objects
Will I have to pick all object one by one ?
What would be the adjustement in table RSLOGSYSMAP ? For the moment it's empty.
Regards
Guillaume P.

Source system is already exist

Similar Messages

Maybe you are looking for