Source system jobs in ready status

Hi Gurus,
I am Extracting data from R/3 to BW, when i execute the infopackage the jobs in source system are in ready status and they are not moving to active & finished status.
Is there any method to make the jobs in source system active manually.
Thanks & Regards,
chinnu.

When you execute the infocpackage you must use the inmediatly option for execution or programmed job ...in your case is assume that you use the orogrammed job....if you use this last option...you must setup your job with init time...if you do not use the start time and hour the job will never starts....this could be your problem

Similar Messages

Killing a job in "Ready" Status

HI all,
Is there any way that I can delete or cancel a job which has a status "Ready"?
Thanx in advance.
Rgds
Lalit Rana

please only post your question in 1 forum.
I answered you at How to kill a job in "Ready" status.

Source System Job

Hi,
I am loading data from CRM system to BI system. Initially I have loaded data from datasource to PSA and PSA to DSO. Data was successfully updated from datasource to PSA and PSA to DSO.
After that I have checked the data records in datasource and BI (PSA & DSO). Datasource has 659 fields and the same count has been uploaded to PSA & DSO.
After that I have checked the job in SM37 in both systems. Job was finished at BI system but in source system side job was still in active mode.
I dont know why it is in active status.
This is the custom datasource which we created and populating data through function module.
can any body tell me why job was still in active mode in the source system and what should I do?
Thanks in Advance,
Venkat

Hi.......
What do u mean by job in BI side completed.............Look when a IP starts..........first a backgroung job will run............after completion of that background job.........the actual IP.....ie the extraction will start......if u r loading through Process chain...........then right click on the load process >> Display message...........Backg tab >> Click on Batch Monitor ..........the job name is BI_PROCESS_LOADING............if u r not loading through Process chain...........u can check this job in SM37......................r u talking about this job?..........or u mean that the IP is completed..........I mean status is green in BI side........
U r saying that still job is in active in the source system..............that means the extraction job(BIREQ*) is still running...........If the IP is showing completed in the BI side............then in the source system.........open the job through SM37............select the job >> In the top JOB tab is there >> Click on it >> then click on Check Status............see whether the status is changed to finished or not........
Hope this helps.........
Regards,
Debjani.......

Error in Source system (Job is not going in to job log of CRM system)

Hi,
We replicated datasources from CRM server in BI 7 server and they get replicated and are in Active version
All transactiond atasources which are 7.0 version are executing successfully, but the Datasources which are in 3.5 version i.e. Datasource for master data infoobject gives error while executing infopackage.
The error message is as follows:
"Diagnosis
     In the source system, there is no transfer structure available for
     InfoSource 0CRM_MKTMETA_ATTR .
System Response
     The data transfer is terminated.
Procedure
     In the Administrator Workbench, regenerate from this source system the
     transfer structure for InfoSource 0CRM_MKTMETA_ATTR ."
Also while executing the infopackage the job log in source system is not able to create the corresponding job.
Following action are already been taken:
1. Datasource replication
2. Confirmed that the Transfer Structure are avialable and are in ACTIVE state.

Hi
It seems some changes are taken place at Source System for the Mast.Data DS. Try to Recheck the Same at Source System -- Activate/Retranport the same.
BI side.
RSA13Source System Your DS-- Replicate the Data Source -- Try to Run RS_TRANSTRUC_ACTIVATE_ALL(SE38) / Activate Transfer Rules Manually -- Then Full/Re Init -- Delta Uploads
Hope it helps and clear

Job is not in Active mode, still in Ready mode in the source system

Hi Folks,
Process Chain carrying some data loads asusally today also, i noticed there is no action in the details tabs, then i checked in the source sytem, jobs in ready mode. why it is turned like this.
Can any one provide your valuable inputs on this...
Thanks,
V

Hi ,
Thanks for your quick responce on this..
My issue has been resolved: Issue occured due to in the source system issue. All BW job has been scheduled in one particular application server which is facing more than issue.
Basis team involved and resolved them.

How can we change the Job priority in the Source system

Hi All,
We are facing an issue with the process chain execution in the Production system. We have a process chain which runs daily in BI system and the chain is designed in such a way, that as soon as the chain starts in BI system, a corresponding job is triggered in the Source system (ECC 6.0system).
Now the issue is that after we have our Source system upgraded the memory allocation for the particular Job (FIGL )is reduced and due to which the FIGL job is failing frequently. When we have consulted some experts.They advised Us to increase the Priority of the Job in source system to A/1, as of now the job is running in B/2 priority.
Please let us know the way how we can increase the priority of the Source system Job, so that when the process chain triggers a job in source system and that particular jobs should run with Priority A/1.
Thanks in advance.
Regards,
Chandra.

Hi Chandra,
First please find the job name in SM37 for FIGL and check the job status to be in "released" status. Select that job and go to job menu and click on change. then it will take you to the job screen where you have "job class". Here you can change the job class to "A" to get to high priority.
If you are unable to edit the job then create a new job with the same variants by clicking STEP button in the Job screen.
Try these steps, let me know if are able to do so.
Regards,
Ravi Kanth

Data load problem - BW and Source System on the same AS

Hi experts,
Im starting with BW (7.0) in a sandbox environment where BW and the source system are installed on the same server (same AS). The source system is the SRM (Supplier Relationship Management) 5.0.
BW is working on client 001 while SRM is on client 100 and I want to load data from the SRM into BW.
Ive configured the RFC connections and the BWREMOTE users with their corresponding profiles in both clients, added a SAP source system (named SRMCLNT100), installed SRM Business Content, replicated the data sources from this source system and everything worked fine.
Now I want to load data from SRM (client 100) into BW (client 001) using standard data sources and extractors. To do this, Ive created an InfoPackage in one standard metadata data source (with data, checked through RSA3 on client 100 source system). Ive started the data load process, but the monitor says that no Idocs arrived from the source system and keeps the status yellow forever.
Additional information:
BW Monitor Status:
Request still running
Diagnosis
No errors could be found. The current process has probably not finished yet.
System Response
The ALE inbox of the SAP BW is identical to the ALE outbox of the source system
and/or
the maximum wait time for this request has not yet run out
and/or
the batch job in the source system has not yet ended.
Current status
No Idocs arrived from the source system.
BW Monitor Details:
0 from 0 records
but there are 2 records on RSA3 for this data source
Overall status: Missing messages or warnings
- Requests (messages): Everything OK
o Data request arranged
o Confirmed with: OK
- Extraction (messages): Missing messages
o Missing message: Request received
o Missing message: Number of sent records
o Missing message: Selection completed
- Transfer (IDocs and TRFC): Missing messages or warnings
o Request IDoc: sent, not arrived ; Data passed to port OK
- Processing (data packet): No data
Transactional RFC (sm58):
Function Module: IDOC_INBOUND_ASYNCHRONOUS
Target System: SRMCLNT100
Date Time: 08.03.2006 14:55:56
Status text: No service for system SAPSRM, client 001 in Integration Directory
Transaction ID: C8C415C718DC440F1AAC064E
Host: srm
Program: SAPMSSY1
Client: 001
Rpts: 0000
System Log (sm21):
14:55:56 DIA 000 100 BWREMOTE D0 1 Transaction Canceled IDOC_ADAPTER 601 ( SAPSRM 001 )
Documentation for system log message D0 1 :
The transaction has been terminated. This may be caused by a termination message from the application (MESSAGE Axxx) or by an error detected by the SAP System due to which it makes no sense to proceed with the transaction. The actual reason for the termination is indicated by the T100 message and the parameters.
Additional documentation for message IDOC_ADAPTER 601 No service for system &1, client &2 in Integration Directory No documentation exists for message ID601
RFC Destinations (sm59):
Both RFC destinations look fine, with connection and authorization tests successful.
RFC Users (su01):
BW: BWREMOTE with profile S_BI-WHM_RFC (plus SAP_ALL and SAP_NEW temporarily)
Source System: BWREMOTE with profile S_BI-WX_RFCA (plus SAP_ALL and SAP_NEW temporarily)
Someone could help ?
Thanks,
Guilherme

Guilherme
I didn't see any reason why it's not bringing. Are you doing full extraction or Delta. If delta extraction please check the extractor is delta enabled or not. Some times this may cause problems.
Also check this weblog on data Load errors basic checks. it may help
/people/siegfried.szameitat/blog/2005/07/28/data-load-errors--basic-checks
Thanks
Sat

Data extraction taking long time in source system.

Hi all,
I have created one custom datasource which is full update (not delta).
we are extracting data using function module in the source system.
it works well in Dev system but when I try to pull even 10 days data from source system to BW in production environment it generates huge log in source system. job log gets full & we have to cancel the job.
Job log looks as follows
Job started
Step 001 started (program SBIE0001, variant &0000000642922, user ID ALEREMOTE)
Asynchronous transmission of info IDoc 2 in task 0001 (0 parallel tasks)
DATASOURCE = ZDSHIPTRACKN
*          Current Values for Selected Profile Parameters               *
* abap/heap_area_nondia......... 2000000000                              *
* abap/heap_area_total.......... 2000000000                              *
* abap/heaplimit................ 40000000                                *
* zcsa/installed_languages...... DE                                      *
* zcsa/system_language.......... E                                       *
* ztta/max_memreq_MB............ 2048                                    *
* ztta/roll_area................ 6500000                                 *
* ztta/roll_extension........... 2000000000                              *
Call customer enhancement BW_BTE_CALL_BW204010_E (BTE) with 3,858 records
Result of customer enhancement: 3,858 records
Call customer enhancement EXIT_SAPLRSAP_001 (CMOD) with 3,858 records
Result of customer enhancement: 3,858 records
PSA=0 USING & STARTING SAPI SCHEDULER
Asynchronous send of data package 1 in task 0002 (1 parallel tasks)
IDOC: Info IDoc 2, IDoc No. 7775180, Duration 00:00:00
IDoc: Start = 28.01.2011 11:26:36, End = 28.01.2011 11:26:36
Call customer enhancement BW_BTE_CALL_BW204010_E (BTE) with 0 records
Result of customer enhancement: 0 records
Call customer enhancement EXIT_SAPLRSAP_001 (CMOD) with 0 records
Can someone plz tell me what can be the issue.?
Thank you

Hi
Whats logic for datasource?
can you share code here?
it might work fine after some ABAP tuning.
Regards
Sudeep

Job is not running in Source system.

Hi Experts,
One issue I have because of this I am not able to load data into Data sources.
I am in BI 7.0 environment.
when I execute infopackage, total and techinical status are in yellow.
I found in R/3 Job is not running, based on this statement in SM37. from the fallowing.
Call customer enhancement EXIT_SAPLRSAP_001 (CMOD) with 0 records
Result of customer enhancement: 0 records
IDOC: Info IDoc 2, IDoc No. 3136, Duration 00:00:00
IDoc: Start = 14.05.2009 07:23:39, End = 14.05.2009 07:23:39
Synchronized transmission of info IDoc 3 (0 parallel tasks)
IDOC: Info IDoc 3, IDoc No. 3137, Duration 00:00:00
IDoc: Start = 14.05.2009 07:23:39, End = 14.05.2009 07:23:39
Job finished
Job satrt time and end time are same, so job is not running in the sourcesystem, am i right. let me known if i am worng.
It is Standard Data source but in the above statement becasue *result of Customer enhancement:0 records.*
please help me to reslove this issue to load data into BI.
1. what I have to do to run job in source system side.
2. should I take any help from Basis.
Regards
Vijay
Edited by: vijay anand on May 14, 2009 3:02 PM
Edited by: vijay anand on May 14, 2009 3:04 PM

Hi Rupesh,
in RSA3 data is availbale,
but it is not coming to BI,
Messages from source system
see also Processing Steps Request
These messages are sent by IDoc from the source system. Both the extractor itself as well as the service API can send messages. When errors occur, several messages are usually sent together.
From the source system, there are several types of messages that can be differentiated by the so-called Info-IDoc-Status. The IDoc with status 2 plays a particular role here; it describes the number of records that have been extracted in a source system and sent to BI. The number of the records received in BI is checked against this information.
the abovemessage I am getting in details tab.
Regards
Vijay

Info IDoc received with status 8 in BI but Data available in source system

Hello Experts,
I am loading Budget Period (attributes) into PSA in BI.
Budget Period data Loading Issue : No data available while loading. But source system ie ECC has data in that data source
Data source: 0PU_BDGTID_ATTR
This is full load.
I checked that whether I am making any mistake during data selection. I could not find any issue. Message while loading data into PSA (Yellow Traffic light)
No data available
Diagnosis
The data request was a full update.
In this case, the corresponding table in the source system does not
contain any data.
System Response
Info IDoc received with status 8.
Procedure
Check the data basis in the source system.
Already looked this thread and googled also.
Re: IDoc received with status 8.
Check points:
sm58 - NO issue
BD87 in ECC (RSINFO Idoc status: 03) -sucessful
BD87 in BI (RSINFO Idoc status : 53)
ST22 - NO issue
sm37 - Job is successful (I could see Idoc no in ECC source system in Job log)
I am not sure if I am missing any thing.
Thanks
Rana

Hi all,
I've got exactly the same issue with several extractors. I'm inialising the Master Data in a all new system, in the Quality the loads succeeded but in Prod it failed.
For instance with the basic DataSource "0FUNCT_LOC_TEXT", I've made the following test:
RS3 (R/3) - > 0 data
ST22 -> no short dump
WE05 (Idoc) - > everything is ok
I reactivated the Datasource in R/3 (RSA5) and then deleted it and replicated it in BW but the same issue occured.
Any ideas?
Thanks
jak

Unable to kill or cancel the job in source system

Hi gurus,
   got a error , while loading delta for line item ods in AR.
stating as the job is not ended in the source system.'
i find the job in the source system and it is active.
   i tried to kill that job from sm37, its not happening,
and tried to cancel from sm50 even its not happening.
kindly suggest how to cancel or kill that job.
its urgent plz.
pramod

Hi,
        Check If u r system is running on more than 1 server...kill your job with proper appropriate server in tcode SM51.And also after killing the job come to SM37 check that particular job, nd on top menubar,u will 'check job status'.Then do refresh.
Hope this helpful to you.
Regards,
Praveena.

Job in source system terminated

hi xperts,
 I am getting following error while loading from 2LIS_03_BX to 0IC_C03 CUBE.
i already put the GENERATE INITIAL STATUS.
"Job in source system terminated --> Request is set to red."
In the details TAB:
a)Requests (messages): Everything OK
 Data request arranged
Confirmed with: OK
b)Extraction (messages): Errors occurred
 Data request received
 Data selection scheduled
 Error occurred in the data selection
c)Transfer (IDocs and TRFC): Everything OK
Request IDoc : Application document posted
Info IDoc 2 : Application document posted
Info IDoc 1 : Application document posted
d)Processing (data packet): No data
Please help me,its really urgent.
Thanks in advance.

Hi,
 if you can not find any reason in sm21, st22, rsa3. then try as below:
 1. replicate the datasource;
 2. activate transfer rule;
 3. quit workbench
 4. entry workbench
 5. create a new data package
 6. load data with the new data package again;
hope you good luck;

Job termination in source system

Dear All,
I am trying to load payroll data using Datasource ZHR_PY_1 . I am doing init data for the first time using infopackage for this datasource. I have tried to pull a couple of years, 2 months, even 1 day of data, but all give me the same error.
The error is
1.The request turns red after a couple of hrs pulling zero records.
2. Error Message says Job terminated in source system.
3.Step by step analysis says
red - data selection successfully started
red - data selection successfully finished
red - processing error in source system.
Error says "error occured in data selection"
If I go to RSA7 in R/3, datasource ZHR_PY_1 has yellow status.
RSA6 shows everything active.
Can anybody make out what may be the reasons why BI system is not able to connect to pull R/3 data.
Regards,
Jack

Hi,
Some times the source system needs a lot of time to "prepare" the output records and will got through a lot of tables before getiing any result how small it may be.
But also try the options as given by the others consultants (as RSA3, checking the system connection, replicate and activae data source again.)
Your can also use tx SMQ2 u2013 qRFC-monitor in R/3 to see what happened.
Success,
Udo

Reg: job termination in source system

hi experts
can anyone tell me solution for this problem after loading infopackage, status of the infopackage is showing is like this "job termination in source system", but i checked with ss it showing job gets cancelled. but i am not assigned any to the data source, so how can eliminate this problem.
regards
harikrishna.N

HI
This can happen when request IDOC is sent source system, but the source system for some reason is not available.
Ensure that source system is available. Change technical status of request to red and delete request from datatarget. Trigger Infopackage again to get data from source system.
Cheers,
Raj

Backgroung jobs remain in "Ready" status

Dear All,
Our Production is one central instance ( on Hp-ux ) and 3 application server ( one is on Hp-ux work as application server/failover server when central server down then that server act as central server ( cluster ) . and two more application server on redhat enterprise server 3).
Problem is that when my Linux application server in working or started or functioning background jobs (mostly) remain in ready status why?
In same forum I read that after restart system it will finish but it is not a solution.
Please guide me
Regards
Rayyan

check whether you have enough free bgd processes on second node?
And check those jobs are not server specific...
Regards,
Nick Loy

Source system jobs in ready status

Similar Messages

Maybe you are looking for