Source system mapping/conversion between BW systems
Hello BO/BW Forum
I have question regarding source system mapping between BW systems
We are in BW7 and we still have BW3.5 objects (Cubes,IO,ODS ets)
We have 1 source in BW Dev that need to split to 2 different sources in BW QA
e.d BW Dev map to ECC Dev 110 and when we transport ,it should map
to 2 sources ,one is ECCQA Clinet 200 and another map to ECCQA Client 210
in the conversion in BW QA we have mapped it to the 2 ECC QA sources but
the problem is that if we would only work with BW7 objects this will work but since we have
also BW3.5 objects the mapping in not complete , we also checked the 7.0 button in the conversion
any assistance is highly appreciated
Hi,
Hope you aware of Infosources interacts with Replicated Datasources.
As per your post, BW1 is a source system for BW2 and BW3.
So, you have to create Infosources in BW2 and BW3. So you have to replicate the datasources in BW2 and BW3.
Regards,
Suman
Similar Messages
-
Source system mapping for transport
We just create a change request for an InfoSouce. Now we transport this change request from DEV system to TEST system. But when this change request was imported on TEST system, got the "Method Execution" red error which can be checked through STMS in log. The red error msg is "Source system A does not exist", where A is our R3 DEV server. Actually we need the source system B which is R3 TEST server in the InfoSouce transported into BW TEST system, but the problem is that the change request was created on BW DEV which uses A as Souce System in the InfoSouce, then how to make the InfoSouce has B on BW TEST after the transport?
Roberto gave an answer (see my another post: What should BASIS do for an InfoSource transport for Souce System change?) as below:
"you have to set the source system mapping in your target system in RSA1, Transport Connection -> F8 and then import your request again !"
But he said this setting would be done at the target or TEST system. I don't think it's right, this mapping setting should be done at the DEV system since our transports are created in DEV Transport Connection, am I right?
Please verify who is right?hi Kevin,
let's refer to sap's doc
'bw and transport'
https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/docs/library/uuid/3010ba90-0201-0010-2896-e58547c6757e
p. 33
'.. make sure to set the source system mapping configuration in each <u>target system</u> to convert the transfer rules ..' -
What is the difference between developement system and delivery system?
Hello Experts,
I have some questions regarding publishing the content on delivery system.
Could some one help me.
1) Can we use Development System as Delivery System?
2) Can we Publish a Site into Development System?
3) How to check whether the installation done in development mode or in delivery mode? I mean do we have any procedure to check ?
4) What are the Advantages of Delivery System over the Development System?
Note: I installed Webcenter sites11gR1 on Weblogic10.3 server and windows 7.
Thanks in advance
Rajendar.Rajendar Raj wrote:
I got the answers.
1) Can we use Development System as Delivery System?
Ans:
Yes, a development system contains the same functionality as a delivery system. Conversely a delivery system doesn't have a contributor interface so it cannot be used for managing assets.
Not recommended and it also depends on the sizing of your environment and tuning. Delivery systems usually are architected with performance in mind, depending on the expected load, logs are minimal and usually Remote Satellite Servers are added. Important as well is that no content or any assets is created directly on the delivery system, you might run into unique ID constrains when you publish content from Authoring to Delivery, in your case Development.
2) Can we Publish a Site into Development System?
Ans:
Yes, you can.
Be careful this is not recommended, you can run into unique id constraints issues
3) How to check whether the installation done in development mode or in delivery mode? I mean do we have any procedure to check ?
Ans:
Look in the ominstallinfo directory, in the location where WebCenter Sites was installed. there is a file called omii.ini that contains installation-time choices and parameters. Look for the parameter "Development"
- true, indicates it was a Development type install. Advanced UI will be available, as will the Contributor UI
- false, indicates it was a Delivery type install. Only Advanced UI will be available.
4) What are the Advantages of Delivery System over the Development System?
Ans:
A delivery type install is more secure, as the contributor UI and some other editorial components are not installed. It also prevents editors from changing content on the delivery system by mistake.
In general Delivery systems are architected different, more emphasis on performance, caching and security.
Thanks and Regards
Rajendar.Regards,
Rodney -
Source system mapping between BW systems
Hi All
I have question regarding source system mapping between BW systems
We are in BW7 and we still have BW3.5 objects (Cubes,IO,ODS ets)
We have 1 source in BW Dev that need to split to 2 different sources in BW QA
e.d BW Dev map to ECC Dev 110 and when we transport ,it should map
to 2 sources ,one is ECCQA Clinet 200 and another map to ECCQA Client 210
in the conversion in BW QA we have mapped it to the 2 ECC QA sources but
the problem is that if we would only work with BW7 objects this will work but since we have
also BW3.5 objects the mapping in not complete for the 3.5 objects , we also checked the 7.0 button in the conversion and it still have missing objectsHi... i dont understand your isse you have one source of transport and in the destination if points to two systems and this works for you....and your problem is in 3.5 objects? its a version problem?
Regards -
Source System mapping while transporting objects from Q to P
Hi All,
I have moved all my transports from BW DEV to Q twice with different source system mappings, say R3D to R3Q and again R3D to R3X, as I have to do testing from both the source systems.
Now, I have to move all those transports to PROD and I found out that they will be moved from Q to P and not from DEV to P. In such case, what source system mapping should I maintain in P? Is that R3Q to R3P or R3R to R3P?
Hope I am clear with my question. Please let me know if it is not clear.
Thanks,
RPK.Hi Nasiroddin,
Itseems I am not clear with my question. Let me put it in another way.
My BWQ is connected to two R/3 source systems, say R3Q and R3X where as my BWP is only connected to R3P. While transporting the requests from BWQ to BWP, I know that I have to maintain the source system mappings(Tools->Mapping of the source system names). Now I am in doubt about what mapping do I need to maintain(either R3Q->R3P or R3X->R3P)? Which source systems transfer rules etc.(all source system dependant objetcs) will be transported, either R3Q or R3X?
Thanks,
RPK. -
Conversion of logical System Name
Hi,
I have read somewhere that Conversion of logical System Name is part of BW System check Before go live. Can someone explain the purpose of it.
Thanks in advance
krishHi,
There are two different activities related to this, if you have done the system copy then for changing the logical system name we will run BDLS transaction. Check the below link for more information,
[http://help.sap.com/saphelp_nw70/helpdata/en/33/c823dbaea911d6b29500508b6b8a93/content.htm]
But if you want to move the source system dependent objects from one system to another system then we maintain the source system and target system mapping in target system.
For transport method you can maintain the system names as suggested by Gaurav and you can check that in table RSLOGSYSMAP or you can directly maintain entries in this table.
Regards,
Durgesh. -
Conversion of logical system names
Hi
Must the Conversion of logical system names be set up in each client.
I.e in the BW production client do I have to go and setup what the conversion is between before the transport and after the transport.
Also if I then go into this view and want to add my conversion detail, and the system doesn't exist (in table) do I have to create the entries in Dev and Transport it through?
CorneHi Corne,
If the correct entries don't exist in the underlying tables, you have maintain it in SPRO.
The entry in the table is cross client. hence it has to be done in Dev.
Go to SPRO -> SAP Netweaver -> Business Intelligence -> Links to Other Source Systems -> General Connection Settings
-> Define Logical System
1. To create a logical system, choose Edit -> New Entries.
2. Enter a name for the logical system that you want to create.
3. Enter a description of the logical system.
If you want to cange this entry:
a) Select the appropriate line.
b) Choose Edit -> Change field contents.
c) Enter the new text.
d) Choose Replace.
4. Save your entries.
Roy -
Client Copy between unicode system and non-unicode system
Hello,
we have to build up a new system for japan. It is planned to install a new 4.7Ext200 unicode system and then make a client copy from a non-unicode 4.7Ext200 (language= german, english) system to the unicode system. I don't think that this is possible way, but I can't find information regarding client copies from non-unicode to unicode. I would advice the project to convert the existing non-unicode system to unicode, make a system copy for the new system and then install japan languages. Any information, which can help me.
Regards,
AlexanderHi,
without conversion client copy is not possible
look at following
Re: Client copy between unicode and Non-unicode
regards,
kaushal -
Mapping issue in quality system
Hi Experts,
I am new to BODS tool. Currently I am working with BODS 4.2 version.
I have an issue with mapping of datastores in quality system.
Actually I have created a project in Development system ( done all the things I mean to say Jobs, Workflows and Dataflows...).
For this project, Source tables are from SQL server and Target tables are from SAP BI system.
In BODS Development system, this project is working fine ( Source tables are perfectly mapped to Dev SQL Server Database tables and Target tables are mapped to SAP BI Dev system). While running a process chain in SAP BI DEV system, It's working fine.
Now I have Transported this Project to BODS quality system through central repository.Everything related to this project ( I mean to say project, Jobs, Workflows and Dataflows ) got reflected in quality system.
Can anyone please let me know, how should I map the Datastores related to this project to the quality system ( I mean to say now all the source tables should point to SQL Server Quality system Database tables and Target tables should point to SAP BI quality system ).
Appreciate for your quick responses.Hi Cris,
Please Edit your SQL datastore and BI datastroe in BODS and provide the Quality system username and password. For BI datastore please update ip aslo.
Steps for BI datastore:
Right click on your BI datastore and click Edit--->click advanced tab-->Edit-->refer below sreenshoot
Please provide your Quality system credential then -->click apply-->ok
Same procedure you can follow for SQL datasore.
Thanks & Regards,
Balamurugan G -
Conversion of logical system name fails
Hi,
when trying to transport a transformation on BW7 the logical conversion name is failing. When i check the setup (on rsa1 menu "Conversion of logical system names") it seams to be ok on source and target system.
Any tips to solve this ?
thx in advanceHi,
when you are not maiantained the logical systems properly , then you will get that error when you are transporting the objects
in Bi production system ( to which server you are moving objects) in that you should maiantain the all logical systems as below
1) for examaple BI deve --- BI prd
one logical systm should be bi Dev to BI prd
2) ECC production connected to BOI production
Then one more logical assignment ECC prd to BI prd
normally those two you are maintained i think so.
but when you are moving the objects from the BI development to Bi production
the daat sources are pertaining to the ECC developmet
so that ECC deve to BI Dev ( here there is no problem)
when those daat source s you are moving to production it shows error
because that ECC deve Data source logical system should be changed to BI production
so you main tain one more logical system ECC dev to ECC PRD
in your BI system
Then try reimport the same.
Thansk & Regarsd,
sathish -
Hi,all,
I have 3 BI box - BWD, BWQ, BWP, and 3 R3 box - R3D, R3Q, R3P, before I transport datasource, infopackage from BWD to BWQ, I configured the conversion of logical system in BWQ as: BWD -> BWQ, R3D -> R3Q, that works fine, So before I transport to P, how should I configure this mapping in BWP: BWD -> BWP, R3D -> R3P or BWQ ->BWP, R3Q -> R3P?
Thanks a lot.Hi,
You can input all four or you can input the combinations going from your Q to your P system. Both will work...
-Jacob -
Table for conversion of logical system
HI All
please let me know the table name which will have all source system converion list.
thanks in advance.
thx
vijHi,
Can also check at transaction RSA->Tools Menu->Conversion of logical system names(Displays all Source and Target Systems).
Thanks,
Rema -
No User Mapping Defined for the system
Hi,
I am trying to create the transcation iView ,here in this i want to run the BW transcation..
For this i have created the transaction iView with the transaction code in that iview properties i have given the system alias which i have created for the BW system..
The system which i have created for this is SAP R/3 dedicated...
when i try to see the preview for this transaction iview it is giving the Error"No user Mapping defined in the system...
i have done the user mapping also...
Plz can any one help me in this..
useful solution will be rewarded...
Thanks
Shashank
Message was edited by: shashank moharanaHi Shashank
the follwoing is total soln for connect EP AND BW and for ITS as well as SSO
<b>Creating BW system in Portal</b>
From the portal top-level navigation, choose System Administration -> System Configuration -> System Landscape
Navigate to Portal Content -> Your SAP Ssytem Folder i.e SAP BW
Right-click on the SAP BW folder, then choose New -> System
Select SAP system using dedicated application server
from System Template
Make the following entries for the BW system you want to connect to the Enterprise Portal
System Name -
SAP_BW
System ID -
Any ting u want like SAP_BW or SID of BW
System ID Prefix -
com.mycompany
Master Language -
English
Description -
NEXT -> Summary, review the options you selected for the new page.To make changes, choose Back to return to the appropriate screen. Then choose Next till you reach the Summary page, review, and choose Finish
Choose Open the object for editing and choose OK
The Property Editor iView will open
Select Connector in the Property Category dropdown
Enter the fields below according to your SAP system
Application Host -
IP Address of BW system or Host name ( FQDN required for SSO )
SAP Client --- BW system client
SAP System ID -
SID of BW
Server Port -
3200 default for system number 00
SAP System Number -
00 or ur instance number
<b>System Type -
SAP_BW</b>
NOW,
Select User Management from the Property Category dropdown list
Enter the fields below
Logon Method -
UIDPW
User Mapping Type --- Admin,user
Note -: IF u want to use SSO for BW system first selct above and test it with BW system if it's ok than change to following
Logon Method -
SAPLOGONTICKET
User Mapping Type --- Admin,user
choose SAVE.
Select System Aliases in the Edit dropdown list. This opens the System Alias Editor
In Alias, enter SAP_BW. Choose the Add button
Choose Save to save your changes and close the page
<b>Connect With ITS</b>
For BW
In Property Catalog, use the dropdown to select ITS.
Set your SAP system properties according to Following
ITS Description -
Description
ITS Host Name -
Host name : Port for BW system
<b>If u want to use SSO use FQDN instead of host name</b>
ITS Path -
/scripts/wgate
ITS Protocol -
http
Save your settings.
<i>u can check its for BW by following
Find a port for BW using IIS manager
Administrator tools -> Internet Service Manager - >
extend the HOST
Find the site created for BW system same like SID of BW system -> right click -> Properties
TCP Port -- this is used for ur BW system</i>
in IE http://host_for_its:Port_for_bw/scripts/wgate/webgui/!
<b>WAS for BW System</b>
Select Web Application Server (WAS) in the Property Category dropdown list
WAS Description -
BW WAS
WAS Host Name -
Host name : Port for BW system
<b>use FQDN for SSO</b>
WAS Path -
/SAP/BW/Bex
WAS Protocol -
http
Save ur entry.
<b>User Management For BW and EP</b>
Befor u start if u don't use SAP Secu lib during installation
change the following
system Administration -> System configuration -> Um configuration -> Direct editing
find out follwoing
ume.usermapping.unsecure=False
change to
ume.usermapping.unsecure=TRUE
Save and restart portal server
ther are so many option available for DATA source u have required doc for using that
if u have any query for that msg me back
<b>Mapping Users in the Portal</b>
if u want to use UIDPW than user must be map to BW system
go by following
User Administration -> User Mapping
select the user u want to map by serch or entering a name
Choose the Alias for your backend system, for example SAP_BW
Enter the user id and password for BW user
save ur changes.
<b>SSO configuration</b>
make sure ur Portal ITS and BW WAS system belong to Same
domain.
i.e
portal.mycompany.com
its.mycompany.com
bw.mycompany.com
if not, u can do by creating a alias into host file for corresponding system
for SSO follwoing parameter must be set in profile parameter using RZ10 in BW system
login/accept_sso2_ticket -
1
login/create_sso2_ticket -
1
login/ticket_expiration_time --- desired value default 60
now download the portal certificate form follwoing
System administration -> System configuration -> Keystore
Administration
donload verify.der file save it it's like verify.der.zip
extract it than u can get verify.der
now in BW system using trans. STRUSTSSO2
in the certificate section choose import certificate
choose the file tab enter the path of the portal's verify.der file
set the file format to DER coded
in the trust manager choose ADD to PSE and Choose
ADD to ACL
in the dialog box enter the portal system's id (SID) and client
by default portla system ID is the common name (CN) and client is 000
save ur entry and restart the BW server
this are the basci configuration if u have any query related to it msg me back
regards,
kaushal -
Data source Replication error in BW Quality system
hi experts,
when i replicate the data source in BW QUALITY SYSTEM it is giving the below error.
Invalid call sequence for interfaces when rec
changes.
plz find the long text
Message no. TK425
Diagnosis
The function you selected uses interfaces to record changes made to your objects in requests and tasks.
Before you save the changes, a check needs to be carried out to establish whether the objects may be changed. This check must be performed before you begin to make changes.
System Response
The function terminates.
Procedure
The function you have used must correct the two Transport Organizer interfaces required. Contact your system administrator.
After replication of data source changes are not reflecting in BW QUALITY SYSTEM.
REGARDS
venuscmHi,
Hope you have checked whether the DS has been transported to R/3 Quality and got activated before Replication in BW quality.
Check RFC connections between the systems.
Check RSLOGSYSMAP table in both Bw & R/3 to confirm the system mappings.
Try replicating again.......
Regards,
Suman -
Transporting a Data Source and Hierachie to the Quality System
Hello,
i have following problem.
I want to transport a generic data source from our development system into the quality system.
In the development system the hierachie looks like
New-Hierroot
->CO
->ABB
->Datasource ABB
When i transport the data source into the quality system the hierache looks
New Hierroot
->Nodesnotconnected
->CO
->ABB
->Datasource ABB
How can i solve this problem? Transaction rsa9? We dont have business content on our r/3 systems and iam not allowed to change such settings...??
Thank you greetingsi don't understand that exarctly.
Transport connectionscreen is se09? (what transaction is that?)
and whatis a dev to Q mapping
Sorry iam new..
Message was edited by:
Katsumoto
Maybe you are looking for
-
Questions on Client Failver and Fast Failover
've few questions regarding Client Failover and Fast Faiolver of Oracle Database HA. Before I ask those questions I would like to explain my environment. Below are the details. - We have two physical locations called 'ABC' and 'PQR' - ABC is the prim
-
I am haveing problem watching video's after downloading adobe flash player
i am haveing problem watching video's after downloading adobe flash player, how can i make it working?
-
I am tring to make a flash web site and i got stuck. i need to knew how to link a button to a URL. i resently switched to Flash CS3 but i am having to save all of my file as flash 8 files to get the action script to work. i usauly use AS1&2 i tried s
-
Organizer - Six Mystery photos
I have six pictures in the first folder of organizer that are duplicates of the next six. I cannot select the duplicates or get rid of them and it is causing six pictures to be displaced in each subsequent folder in organizer. These displaced pictu
-
i have an ipad 2 when i open anything that i downloaded such as games or applications it doesnt open i dont know why i tried to turn it off and turn it on again but the same problem any help plz?