Source system not Active error while installing BI content cube

Hi.,
  When I try to install the BI content cube, In logs it is showing the error message as "Source client not Active". I activated the source system in modelling tab. Still the problem continues.  In source system assignment of BI content the source client is also checked. Please give me a solution.

Hi Selva,
If you want to select only infocube, select "Only necessary objects" in grouping. If you want everything related to Info cube, then system will collect data source also and for that it will check if you are authorized in source system. Please check if the source system is connected to BI or you can do one thing activate the data source in source system and replicate it in BI.
Regards,
Kams

Similar Messages

  • DSO Activation Error - While Installing BI Content

    HI Friend,
        First, I deleted one sap  source systems  for BW1 ( My bw1 server BI is : BW1CLNT100 ), later ,I create the same sap source system, But active  0FIAP_O03 ods,
    had error:
    DataSource 80FIAP_O03 does not exist in source system BW1CLNT100 of version A     
    Error when creating the export DataSource and dependent Objects     
    Error when activating DataStore Object 0FIAP_O03
    I go to BW1CLNT100  datasoucres ,I not finded 80FIAP_O03  datasoucre, But I goto bw prd BI datasoucre, I found   80FIAP_O03  datasoucre.
    I think loss  80FIAP_O03  datasoucre for BW1CLNT100 source system, because I am't delete Roules on the 0FIAP_O03 infosoucre  for delete sap soucre systems.
    DSO Activation Error - While Installing BI Content
    this problem no issue, So I create new thread.
    Now, How could me create or load 80FIAP_O03  datasoucre for BW1CLNT100 source system?
    Now, I Replicate Datascoure for BW1CLNT100 source system, Delete old datasocure....... I go home, I will try tomorrow .

    Hello,
    You should generate the export data source for  0FIAP_O03 again, if there is still a problem please goto
    RSA1 > SOURCE SYSTEMS > and right click on the relevant source system, find the datamart application component and
    right click on this to replicate the datasource.
    Best Regards,
    Des

  • ALE Change Pointers in source system not active

    Hi All,
    I am trying to load 0COSTELMNT using deltas. The initial load is OK and then i use a delta and it fails and i get the error:
    "ALE Change Pointers in source system not active"
    I have carried out the following steps in an attempt to resolve the problem - but it didnt. Anyone have any advice??
    (1) Checked BD61 – to confirm whether the change pointers are active
    (2) Checked BDCP to confirm the number range is maintained
    (3) Checked SALE (Activate change pointers for message types)  to confirm whether the change pointer has been activated for the type we need:
    COCOKA     Control segment CO object/cost element
    COELEM     Cost element master data
    (4) In transaction snum, Selected number ranges and confirmed the intervals are setup
    No. 01
    FROM: 0000000001
    TO: 0000009999
    (5) Activate transfer structure
    (6) Replicate Datasources
    Thanks,

    If you are transferring master data from source system, the BD61 setting on the source system should be checked.
    Why it has been unchecked - not sure (likely someone did it by mistake).
    It shouldn't have any effect on txnl delta. What will be effected though is that you will have lost delta of the ALE based data sources for the period this setting was unchecked.

  • Source system not available error

    If the error message is teling as source system not available
    so what can be the reasons for that and tell me the solution also.
    data cllection is incorrect
    so what can i do i have checked trfc connections every thing but every thing is fine
    so any body help me out in this.
    your suggstions will be rewarded.
    Regards.
    Vikram.

    Hi Vikram,
    Try the below mentioned steps:
    1. Check the connections on BW sysetem and R/3 system.
    Use the tcodes: sm58 and sm59. On the context menu of the source system created, check the option for conections. If connections are not fine, contact the basis team
    2. Go to 'source systems' select you source system and right click and select 'Repicate Data Sources' , then try replicating the the infosource for that
    appilication at the top node level as a whole, the try replicating the Data source
    with in your infoarea..
    Hope it would help ..if yes..assign points.
    Regards,
    Manu.

  • Errors while installing Business Content

    Hi,
    It is new system, When I am trying to install any Infocube it has given Runtime error OBJECTS_OBJREF_NOT_ASSIGNED. Then implemented the SAP note 1019055.
    To Install Business Content I am following: Grouping: In Data flow before and After wards, Collection Mode- Collect Automatically, Source System Assignment and Install .
         Now when I am trying to install I am getting these errors
    Process LOADING, variant 0PAK_0U36G4BPCOA4BN43PFVZU3A97 has been saved in target system under name1
    Process LOADING, variant 0PAK_0AWN44OD08M313H1SIIA96HT7 has been saved in target system under name 1     
    Process variant LOADING 0PAK_0AWN44OD08M313H1SIIA96HT7 does not exist in version A
    A type "Attribute Change Run" process has to follow process "Execute InfoPackage" var.0PAK_0AWN44OD08M313H1SIIA96HT7 in the chain
    A type "Data Transfer Process" process has to follow process "Execute InfoPackage" var.0PAK_0AWN44OD08M313H1SIIA96HT7 in the chain
    Process variant LOADING 0PAK_0MPC1AWCV7TGZ1CJ843SRIJZD does not exist in version A
    InfoPackage  no longer exists in object version A in table RSLDPIO
    Variant '0PAK_1909HG1UYCGTBUE171UNQCSDN' of process type 'LOADING' not found in A version
    InfoPackage  no longer exists in object version A in table RSLDPIO
      There many errors of this type.
    How to solve the problem. Please help me.
    Thanks in advance.
    Jaswantha

    Hi Jaswantha,
    Installing Business Content Cube would usually require "Grouping" as "Select In Data Flow Before".
    This is as per my observations so far according to SAP Best Practices.
    Pls. try this and get back.
    Hope it helps
    Regards
    PPMM

  • Lotus Notes connector: Error while crawling LOB contents

    Hi all,
    I am trying to configure Lotus Notes connector on SP search. We have successfully followed the Randy Rempel's blog on
    test environment. No problem to search lotus notes content.
    In production environment, we've followed the same procedure but we are facing the following problem. During the full crawl, the below error is thrown
    Error while crawling LOB contents. ( Error caused by exception: Microsoft.BusinessData.Infrastructure.BdcException The shim execution failed unexpectedly - Exception has been thrown by
    the target of an invocation..: System.ServiceModel.FaultException`1[System.ServiceModel.ExceptionDetail] An unexpected error occurred in the Lotus Notes protocol handler while processing the URL
    We have forced Lotus Notes Connector to be more verbose, without success.
    Any help will be appreciated
    David

    Reset the index and re-crawl. That usually claers it
    If you are using NTLM authentication, then make sure that you specified the PassThrough authentication for crawling
    Probably you need to debug the BDC code that underlies the external content types.
    can you Check the permission that you have set for the lotus notes domino databases? Was the content access account added to the local administrator group?
    If this helped you resolve your issue, please mark it Answered

  • OBJECTS_OBJREF_NOT_ASSIGNED : Error while installing business content

    Hi
    Error occured while installing business content
    ABAP/4 Processor:OBJECTS_OBJREF_NOT_ASSIGNED
    Please help me how to resolve the issue
    Regards
    ASR

    Hi,
    Check in SDN... becasue there are n number of resons for that..
    /thread/1056689 [original link is broken]
    http://sap.ittoolbox.com/groups/technical-functional/sap-dev/erro-in-background-job-abap4-processor-objects_objref_not_assigned-252195
    Thanks
    Reddy

  • InfoSource and Source System Not getting collected while activation BC

    Hello there!
        I'm trying to activate the business content. If i group all the objects below and install a cube (or update rules), it gets everything but infosources (Transfer Rules, etc.) and the source system assignment. Neverthless, if i assign datasource to infosource, it works properly.
        I've installed the data sources, replicated it in BW, and done the source system assignment correctly. Any ideas what is going wrong?
    Thanks and Best Regards,
    DKA.

    The issue was with Repository Cache. Delete it and everything works fine.
    Admin Workbench -> Business Content -> Extras -> Repository Cache (DB) -> Delete (Delivery Objects)
    Thanks, anyways.
    DKA

  • Source system (R/3) error while testing from BW

    Hi,
    We are trying to test the source system from BW. We have defined LOGICAL system in R/3 as well as in BW. We have also checked in sm59 for RFC tests and found to be successful in R/3 side as well as BW side. Bur when we tried to activate the R/3 source system in BW side,w e are getting the following errors. Please help urgently.
    1.The following errors occured in source system -  RSAR -374
    2.Result of the destination check: Timed out - RSAR -375.
    Thanks,
    David

    Have a look at this:
    Problem Activating Source system RSAR 374, RSAR 375
    Regards.

  • FILE NOT FOUND ERROR WHILE INSTALLING ORACLE EM GRID CONTROL 10.2.0.1

    FILE NOT FOUND ERROR ON FILES: generalstup, seedstup during the setup phase and when i click ignore from a list of cancel, retry and ignore it moves to the configuration phase and rapidly moves from 63% to 100% and gives the error OUI-10133 invalid staging area. i have tried the install 3 times and dont know what the problem is. i am doing the oracle EM GC INSTALL WITH NEW DATABASE OPTION. i downloaded the full version disks 1-3 from the website:http://www.oracle.com/technology/software/products/oem/index.html
    Enterprise Manager 10g Grid Control Release 2 (v10.2.x)
    Full Installers (Agent, Repository, OMS, and Management Packs)
    Oracle Enterprise Manager 10g Grid Control Release 2 (10.2.0.1) for Linux x86
    when this is extracted it leaves me with Disk1, 2, and 3
    install started from 1, then it later asks for two whick happens to instead be but under Dist 3-but there are two disk2's under Disk 3- one under oms and one under rdbms folder. i have tried both and alas same errors
    i even triwd the same download from edelivery.oracle.com and gives the same madness
    am stuck.

    i followed the link and all the instructions things seemed to go well: it still asked for two files i did not have or could not locate: first its asked for generalstub, then it asked for seedstup and then generalstup again. at this point the installation was at 67% and had passed the link succesful stage and was at the setup succeful stage. when i clicked ignore on generalstub, seedstup and then generalstup again it quicly moved to 100% and never took me to the stage for me to run oraInstroot.sh and allroot.sh
    the configuration assistant stage never cameup and it skipped to the page Specify Repository Database Configuration
    where it asked for repository database hostname port, service/sid and SYSMAN password and also manament service security password. whe i input all the infor mation it will give errors. i have tries deleting all oracle 3 or 4 times and all files that oracle has and repeated the process and am always stuck here.
    error reads :
    -error cheching the existence of the SYSMAN user in Management repository
    -exception occured while connecting to database . please check the connection details you specified and retry
    -io exception connection refused: (DESCRIPTION=(TMP=)(VSNUMM=168821760)(ERR=12514)(ERRO_STACK=(ERROR=(CODE=12514)(EMFI=4))))
    REP DB HOSTNAME:SA-OMS-01
    PORT:1521
    SERVICE/SID:OMSDB01
    SYSMAN PASSWORD:PASS
    THE REST I PUT PASS AS PASSWORD
    NOT SURE WHAT TO DO NEXT.

  • Error while installing business content.

    Hi Guys,
    I am trying to install busineness content for 0BPARTNER. while i am installing i am getting the below error.
    InfoObject 0CUST_CLA is used in transfer rules (M) of characteristic 0BPARTNER
    Please help me to take the action to correct this error.
    thanks in advance
    peter b

    Hi,
    Please check 0CUST_CLA  this infoobject is activated or not if not pls active that.
    http://help.sap.com/saphelp_nw70/helpdata/en/a2/2af638350d5654e10000000a11402f/frameset.htm
    Regards,
    Madhu

  • CL_RSBK_DTP----CP Error while installing BI content

    Hi,
    iam doing BW(740 SP4) content installation and i select Dataflow before and transferred selection ,after some time it is throwing CL_RSBK_DTP------>CP error .
    i searched all earlier documents but of no clue. Pls help us.
    Thanks in advance,
    Phani

    Hi,
    If i choose only necessary objects then iam not  getting any issue. But i need Dataflow before which covers  transformations and DTP's. and this  error is showing while  doing transfer selections itself hence iam not able to select install methods.
    i checked in ST22 but not able to get it and  iam not sure , is there any problem with 7.4 .
    Pls let me know if u find any solution to it.
    Thanks,
    Phani

  • File Not Found Error while installing

    I am using Win 7- 64, downloaded Oracle 11g R2.
    my problem is while i am installing i am getting this error dialogue boxes repeatedly
    File Not Found
    F:\app\Poojaries\product\11.2.0\dbhome_1\owb\external\oc4j_applications\applications\WFMLRSVCApp.ear
    Giving options with
    Abort          Retry           Continue
    i proceeded with Continue, i got many errors like that , even i completed with clicking continue.
    Installation completed.
    While i am trying to login with Username and Password, it giving an error
    ORA - 12560 TNS : Protocol adapter error.
    Even i tried login with DBA also it not working
    Waiting for solution..
    Thank you

    94ca1f3c-5ca1-4c06-9858-513a0c7e2e15 wrote:
    I am using Win 7- 64, downloaded Oracle 11g R2.
    my problem is while i am installing i am getting this error dialogue boxes repeatedly
    File Not Found
    F:\app\Poojaries\product\11.2.0\dbhome_1\owb\external\oc4j_applications\applications\WFMLRSVCApp.ear
    Giving options with
    Abort          Retry           Continue
    i proceeded with Continue, i got many errors like that , even i completed with clicking continue.
    Installation completed.
    While i am trying to login with Username and Password, it giving an error
    ORA - 12560 TNS : Protocol adapter error.
    Even i tried login with DBA also it not working
    Waiting for solution..
    Thank you
    Why would you expect logging on to work when the fundamental installation failed and you chose to ignore the failure?
    As pointed out, there were two zip files, and the contents of them have to be 'merged'.  There was a comment about the on the page from which you downloaded those two files.  And here's a hint:  If you are wedded to the Windows GUI, when you click on a zip file and choose to unzip it, it will be unzipped into a newly created folder with the same base name as the zip file.  Thus zip file 1 unzips into folder 1 and zip file 2 unzips to folder 2, leaving you with copy all of the contents of one into the other.
    There is a cleaner way, and that is to learn to use a command line.
    - open a command prompt (cmd.exe)
    - change directories to the directory where your two zip files are located.
    - issue the 'unzip' command, specifying file 1  ('unzip V17530-01_1of2')
    - issue the 'unzip' command, specifying file 2  ('unzip V17530-01_2of2')
    Done.  You will have two directories, one named 'database' and one named 'grid'.  The 'database directory will be the 'merged from two directories' directory.

  • Product key not valid error while installing CRXI

    Post Author: JSC
    CA Forum: Upgrading and Licensing
    I purchased CRXI a few months ago, but waited till I had my new hard drive in place before.
    At the "user information dialog I entered the only product key code I could find in the case, attached to the third CD pocket in the case.
    Result:   "Product key code XXXXX-XXXXXXX-XXXXXX-XXXX is not valid or has expired."
    However I can see now that it is the activation code for "Cyrstal Reports Server XI R2"
    There are stickers in the case with a shorter code "14-5XXX8-0XXXXE"  I had also tried this code, but the error is the same.
    I hope I don't need an ealier vesrion of CR in place.  I hace CR9, however it is not here with me at this time.
    Any ideas

    I think you still have to install a profile on the device with that type of license... no?

  • Error while installing BI Content-2lis_13_vdkon

    Hi, Guru's
        i have instaled the infosource (2LIS_13_VDKON) (BI 7).Now when i try to assign the  respective Datasource to the above Infosource,i get a error messg stating : The Transfer Structure is not getting generated.so i tried again to install the DS from business content and here i get a messg:( Data element for InfoObject VBELN        0BILL_NUM could not be created).
    any inputs would be appreciated.
    thanks
    mohan
    (would assign points for sure)

    Hi Mohan,
                     Go by the below procedure.
    Step-1.  Go to transaction RSA-6 and check weather your data source is Active  or not.If it is active  that is fine otherwise activate it in RSA5.
    Step-2. Goto your BW System and replicate the data source and assign the respective infosource.
    Step-3. Now Create Transfer rules then update rules for your respective target.
    Step-4. Schedule an Infopackage to pull the data to the target.
    Hope this helps
    Regards, 
    Karthik.
    mail me at: [email protected]
    Assign points if helpful

Maybe you are looking for