Source system problem.

Hello All,
I Transported the Request BWD To BWQ but request ennded with errors i collected all the objects
Message no. RSAR409
Diagnosis
Source system ZDBREMEDY is not known.
System Response
The imported data for DataSource was deleted again because the referenced source system does not exist and no mapping is defined in table RSLOGSYSMAP on an existing productive source system.
Please Suggest..
Thanks
Prakash

HI SVU, Gaurav
Thanks for ur reply's.
I have maintained the source system in TP-Request
This is UD-Connect Datasource
In BWD -- RSA1 -- source system -- under the UD-Connect folder it is showing
SDK_JDBC --ZDBREMEDY
But same folder in BWQ & BWP -- I did't see any thing in that UD-Connect Folder
What are the steps i need to do?
Please suggest..
Thanks
prakash

Similar Messages

Myself Source system problem after System Copy

Hi All,
We recently did a system copy (Production -> Dev). After the logical system rename is done, the myself source system is showing up as a External SAP system, in source system tree under SAP instead of BI. I'm not able to restore/activate it. Any inputs on this problem is appreciated.
Thanks & Regards,
Sree

Problem was with inconsistency in the RSBASIDOC table. Solved by deleting invalid entry and running BDLS again for this specific table.

Creating new Source system problem

Hi there,
System: BW 3.5 client 010, want to connect to R/3 4.6c Sandbox client 0101
we just refreshed our BW 3.5 sandbox with current production data. Now we want to create the source system via RSA1 to point to R/3 Sandbox. When we try to create this we get this new error. I am not sure why it is
Error:
Logical system BIX010 exists already
Message no. R3222
Diagnosis
The SAP Business Information Warehouse BIX010 is already connected to the source system. A multiple connection is not possible.
For some reason, it is reading as BIX010(talking to the system itself) - BW Sandbox systems, it should be doing the source system creation for SBX010 not BIX010 (talking to the system itself)
I tried to create the system manually and automatically, still no luck.
I cannot see SBX010 source system in teh RSA1, I am afraid it might be in the database table and not showing up in the transaction RSA1, does anyone know the table that it has this information, so I can se16 and look at the entries?
Does anyone knows where to look for?
Thanks in Advance
Kumar

Goto SM50 and check for ABAP connections. Look for SBX010. If you don'T find it here you have to create it. Check also BIX010 if it'S connected to the right system.
Regards,
Juergen

Source system problem - very urgent

Hi Friends
We used to use PRD250.We have changed the source system to ATH250.Every infosource has 2 tr rules.1 is for ATH250 and 1 is for PRD250.Now we are trying to delete the Tr rule for PRD250 datasource one.
But it's not allowing to delete.It's saying that
"There is no DataSource with these attributes".
I am trying to delete infosource and it's saying that
"InfoObject 0COMP_CODE of communication structure still being used"
How can i delete either Tr rules for PRD250 or infosource?
Your reply would be appreciated..
Regards,
Chandu.

Hi
The infosource not being used in any update rules and i have deleted data from ods and deleted update rules as well.
Thanks.
Regards,
Chandu.

Source System Problem after system refresh in RSA1 trx

Hi,
We have R/3 4.7 Test source system created in our SCM 2007 Test System. The source system check was OK.
The R3 Test system was refreshed with Production data few days back and now my source system is not working. When i perform Source System check it says:
BI unknown in source system
BI IDoc type ZSSB006 is not the same as source system IDoc type
I performed following steps in R3 Test system after its system refresh:
1. Created logcal system and created RFC.
2. Created port in trx we21.
3. Created partner profile in trx we20.
4. For the outbound parameter RSSEND, I had to create idoc type that should be same as in my SCM system i.e. ZSSB006.
5. Created idoc type using trx we30 as a copy of RSSEND and added entry in table EDIMSG. Now, i could also create outbound parameter RSSEND with idoc type ZSSB006.
After performing the above steps i also replicated the datasources for the R3 Test source system, but its still showing above error.
I also checked the RSBASIDOC table in SCM test system. It has correct entry for my source system. But there is no such entry in RSBASIDOC table in the R3 test system.
Someone pls help me.
Regards,
Chintan

Hi
Need to restore the All Dalaload connection settings after refresh the system which either R/3 or SCM.
RSA1 -> select the Source system -> Right click -> Restore , It'll ask the connecon paramters like RFC , method of activations. Then check the connection test of the Source system .
Check the the note for further info...
Note 886102 - System Landscape Copy for SAP BW and NW BI
Hope halp you...
Regards,
Sureshram

Source System Problem after System Refresh

Hi,
We have R/3 4.7 Test source system created in our SCM 2007 Test System. The source system check was OK.
The R3 Test system was refreshed with Production data few days back and now my source system is not working. When i perform Source System check it says:
BI unknown in source system
BI IDoc type ZSSB006 is not the same as source system IDoc type
I performed following steps in R3 Test system after its system refresh:
1. Created logcal system and created RFC.
2. Created port in trx we21.
3. Created partner profile in trx we20.
4. For the outbound parameter RSSEND, I had to create idoc type that should be same as in my SCM system i.e. ZSSB006.
5. Created idoc type using trx we30 as a copy of RSSEND and added entry in table EDIMSG. Now, i could also create outbound parameter RSSEND with idoc type ZSSB006.
After performing the above steps i also replicated the datasources for the R3 Test source system, but its still showing above error.
I also checked the RSBASIDOC table in SCM test system. It has correct entry for my source system. But there is no such entry in RSBASIDOC table in the R3 test system.
Someone pls help me.
Regards,
Chintan

Hi Chintan,
Can you please check IDOC in your Target system. It should be the same type. Better you do the Partner profile steps.
Also please check have correctly created the idoc in Inbound or Outbound.
Consider the case like if its exist in BW as Out bound then its connected to Inbound IDOC of R/3 and vice a versa.
Please elaborate your refresh activites. Normally IDOC setting never get changed in you refresh activites.
Just check your BW system patch level and search for Notes.
Regards,
Mahesh

Collection in source system error

Hi,
Recently we just performed a BW SP upgrade to 3.0B level 28. During our first extraction after upgrade on production for 0HR_PY_1 (Payroll Data) infosource, we encountered a message "Collection in source system ended".
Anybody has any clue about the cause and how to go about resolving it?
Thanks.
Best regards,
Taly

hi Taly,
datasource need to be replicated from source system (r/3) in production.
area to check -> in monitor request, menu 'environment' check job overview both bw(datawarehouse) and r/3(source system - equal to transaction sm37 - see if job cancelled and any helpful error message like sql error., from menu-environment check the same bw and r/3 for shortdump (st22), transaction rfc, ale management, system log(sm21) and so on, please let's know what's your finding there, possibly source system problem with that message, may ask basis for help. hope this helps.

Data load problem - BW and Source System on the same AS

Hi experts,
Im starting with BW (7.0) in a sandbox environment where BW and the source system are installed on the same server (same AS). The source system is the SRM (Supplier Relationship Management) 5.0.
BW is working on client 001 while SRM is on client 100 and I want to load data from the SRM into BW.
Ive configured the RFC connections and the BWREMOTE users with their corresponding profiles in both clients, added a SAP source system (named SRMCLNT100), installed SRM Business Content, replicated the data sources from this source system and everything worked fine.
Now I want to load data from SRM (client 100) into BW (client 001) using standard data sources and extractors. To do this, Ive created an InfoPackage in one standard metadata data source (with data, checked through RSA3 on client 100 source system). Ive started the data load process, but the monitor says that no Idocs arrived from the source system and keeps the status yellow forever.
Additional information:
BW Monitor Status:
Request still running
Diagnosis
No errors could be found. The current process has probably not finished yet.
System Response
The ALE inbox of the SAP BW is identical to the ALE outbox of the source system
and/or
the maximum wait time for this request has not yet run out
and/or
the batch job in the source system has not yet ended.
Current status
No Idocs arrived from the source system.
BW Monitor Details:
0 from 0 records
but there are 2 records on RSA3 for this data source
Overall status: Missing messages or warnings
- Requests (messages): Everything OK
o Data request arranged
o Confirmed with: OK
- Extraction (messages): Missing messages
o Missing message: Request received
o Missing message: Number of sent records
o Missing message: Selection completed
- Transfer (IDocs and TRFC): Missing messages or warnings
o Request IDoc: sent, not arrived ; Data passed to port OK
- Processing (data packet): No data
Transactional RFC (sm58):
Function Module: IDOC_INBOUND_ASYNCHRONOUS
Target System: SRMCLNT100
Date Time: 08.03.2006 14:55:56
Status text: No service for system SAPSRM, client 001 in Integration Directory
Transaction ID: C8C415C718DC440F1AAC064E
Host: srm
Program: SAPMSSY1
Client: 001
Rpts: 0000
System Log (sm21):
14:55:56 DIA 000 100 BWREMOTE D0 1 Transaction Canceled IDOC_ADAPTER 601 ( SAPSRM 001 )
Documentation for system log message D0 1 :
The transaction has been terminated. This may be caused by a termination message from the application (MESSAGE Axxx) or by an error detected by the SAP System due to which it makes no sense to proceed with the transaction. The actual reason for the termination is indicated by the T100 message and the parameters.
Additional documentation for message IDOC_ADAPTER 601 No service for system &1, client &2 in Integration Directory No documentation exists for message ID601
RFC Destinations (sm59):
Both RFC destinations look fine, with connection and authorization tests successful.
RFC Users (su01):
BW: BWREMOTE with profile S_BI-WHM_RFC (plus SAP_ALL and SAP_NEW temporarily)
Source System: BWREMOTE with profile S_BI-WX_RFCA (plus SAP_ALL and SAP_NEW temporarily)
Someone could help ?
Thanks,
Guilherme

Guilherme
I didn't see any reason why it's not bringing. Are you doing full extraction or Delta. If delta extraction please check the extractor is delta enabled or not. Some times this may cause problems.
Also check this weblog on data Load errors basic checks. it may help
/people/siegfried.szameitat/blog/2005/07/28/data-load-errors--basic-checks
Thanks
Sat

Problem Activating Source system RSAR 374, RSAR 375

Hi all,
Hoping you can help me with this issue. I have two
systems,one R/3 4.7 system and another BW 3.0B system.Both are recently installed. created user in client 800 on R/3. created user in client 100 on BW. i established RFC destination between both, Logical source system assignments and definitions of logical source systems on both. They are working correctly, But i couldnot succeed in creation of the source system. it gets created but it is not activated and ends with the following errors.
Message and the id next to it
1) The following errors occured in the source system. RSAR 374.
2) Result of the destination check: timeout . RSAR 375 .
when i try to activate it by right clicking on it , it does give these errors and activation gets terminated.
Can anyone pleaseeeeeeeeeeee with this. Thanks a lottttttt........
kishore karnati

Hi Kishore and Edwin,
I have exactly the same problem described here, except I am creating an ECC 6 source system in BI 7.
Therefore, I am wondering if you guys can elaborate on your experience.
I get the same error message RSAR 374 and RSAR 375.
I did both connection and authorization tests for the RFC in SM59 and it's OK.
What do you mean by the "basic concept of BWREMOTE AND ALEREMOTE background users."???
Please advise.
Cheers,
SJ

Source System Does Not Exist - Transport Problem

Hi
We have the next Landscape in BW 7.0 (Netweaver 2004's)
LRDCLNT300     is R3 DEV
LRQCLNT700     is R3 QA
LBDCLNT100     is BW DEV
LBQCLNT700     is BW QA
The connections are
LBDCLNT100 (BW Dev) use as source system        LRDCLNT300 (R3 Dev)
LBQCLNT700 (BW QA) use as source system        LRQCLNT700 (R3 QA)
In RSA1->TOOLS -> Conversion of Logical System Names
In Conversion of source system after the transport we have these entries
Source System                    Target System
LBDCLNT100 (BW Dev)         LBQCLNT700 (BW QA)
LRDCLNT300 (R3   Dev)         LRQCLNT700 (BW QA)
But when we transport an order from BW DEV to BW QA show the error "source system LRDCLNT300 does not exist"
Never made the conversion of source system after the transport.
Can you help us please.

Thanks Edwin
     I create a RFC for LRDCLNT300 (R3 Dev) in my BW QA system (Target System).
I try an order again but it didn't work, also I try to check 7.0 checkbox but I got the message "No entry exists for original source system LBDCLNT100 for 3.x object"
and I have to uncheck again.
I still have the same problem the objects are associated to R3 Dev, never make the conversion to R3 QA.

BW and RFC problem -- Source system not created.

Hi Friends,
Before posting this post , i have searched so many posts and docs and but still got a problem in creation of R3 source sytem in BI7.0.
Steps i followed in R3 are as follws:
1) created alogical system for R3 and BI7.0
2)assigned this logical system to clients 001 and 800
001--Bi
800--r3
3)created user BWALEREMOTE in su01 with profile sap_all
Steps in BI7.0 are as follows:
1) Created logical systems for Bi and r3
2) assigned this logical systems to same clients
3) created user BWAleremote in su01 with profile SAp_ALL
with respect to RFC's
In R/3
SM59--created a RFC name same as logical system names
for R3 RFC destination-- user is BWaleremote, client is 800
for BI RFC destination -- user is Bwaleremote , client is 001
when i checked the connections , i can sucessfully test the connections , But remote logins are having problems.
r3 to BW is possible, but it is prompting the password for BI again
BW to R3 is not possible.
To my knowledge and search in forums,RFC connections are succesful, then it should not prompt for any passwords..so iam wrong
I also went into RSA!-- global settings-- i gave user as BWaleremote..
Plz help me in this
PAVAN

Hi Pavan,
The RFC configuration is probably wrong. Check the username/pswd that you are using to connect to the other system. Try logging normally through the sap logon pad using that username/pswd that you have mentioned in the logon tab in RFC connection entry. See if you are able to logon. In the remote logon, it should not ask for any password.
If this succeeds, then create the source system in RSA1 in the BI box.

Problem in R/3 Source System

Hi,
I requested basis Guy to create R/3 Source system.
He created, But when I want to Replicate the Data sources,
When I double click the R/3 Source System
I will get this Messege
" There is no application component hierarchy
in BW for source system &1.
Load application component hierarchy from the source system now? "
I won't get the Hierarchy and I won't see any Data sources here?
what is the problem?
Even My basis Gye says , R/3 Source System working Fine , he says I need to do some configuration.
Please Help me
Thanks
Priya

Hi Eugene,
I previously selected OK button, but i couldn't get the Data sources Hierarchy?
what is the problem?
i am using ECC.5.0.
I selected the Source system Right click then I selected CHECK, i received the message
Source system connection OK.
if source system connection is good why don't i get the data sources?
Basis Guy selected Below option to create Source System
SAP System From Release 3.0E (Automatic Creation)
Source System Icon also looking different, In previous 3.XX we can see the Icon R/3,
but here R/3 Icon is not displayed.
I need to do any configuration for getting datasources?
please help me
Thanks
Priya

Cannot create InfoArea (Source System ID Problem)

Hi,
I cannot create an InfoArea in our BW TestSystem due to the source system ID. I get the following message...
"Choose a Change Request with Target System CCX"
The Performance Asst. gives me the following protocol.....
Diagnosis
The selected change request CC7K900485 has target system .
However, the objects you edit can only be recorded in change requests with the target system CCX.
The correct target system is determined from the package and transport layer to which the object concerned belongs.
System Response
The selected change request CC7K900485 is not used to record the objects.
Procedure
Either choose a different change request or change the target system of the change request CC7K900485.
From the prompt window for change requests, you can display all requests you can use by choosing Own requests.
Alternatively, you can create a new request by choosing Create request.
For more information, see the SAP Library under BC - Basis Components -> Change and Transport System .
I have been in the SourceSystem ID Maintenance (CtrlShiftF11) and noticed that all system ID are two lettered. Could you pls explain how I proceed with this problem.
Thanks,
SD

Hi Srinivas.
Thanks for ur advice. I am on the Requests (Free Selection) screen after going through SE03 and can see the Request CC7K900485. Under that there are a lot of users with comments like "Development/Correction" or "Repair". Could u help me with how I can change the target system to CCX.
SD

Problem in creating DB Connect source system

Hi All,
Iam creating a DB Connect source system to a legacy ORACLE database.
Since my legacy database is ORACLE, I have given the TNS name as the connection info.
The source system got created successfully. but the problem is, upon clicking on 'datasource overview', the system has to generate an application component hierarchy. But it is showing the same application component hierarchy which is there for flat file source system, and iam not getting the option to "select Database Tables" where i can create and edit the datasource.
please help me out.
help would be appreciable and carry reward.

Hi,
Create source system first.
you have to select the option "Database system (Data and meta data using SAP DB Connect)".
Now enter the database specific information.
DBMS:
Username:
Pwd:
Conn. Info:
Conn. Info should be the TNS name if it is oracle database.
after giving the relevent information save it, and come back. Source system will be created.
Now right click on source system and select the option " select Database Tables". it will show you the list of tables or views on that database.
select the table/view on which you need to create data source, and click on "edit datasource" there you can generate datasource.
after creating the datasource, replicate it... adn proceed.
any doubts plz ask me.
Message was edited by: suman dara

Problems Creating R/3 46c Source System in BW3.50

Hello.
Does anyone know if there is a way around opening up your R/3 system when creating it as a Source System in BW? I have no problems when creating the Source System in DEV, but when I attempt to create it in QAS and PRD, I get the message "Changes to Repository or cross-client Customizing are not permitted". Also, short dumps for ALEREMOTE "Dynpro Send In Background" occur in the R/3 system after each attempt.
If there is no way around this, I guess we will just open the systems up to these type of changes and then lock them back down afterwards, but I am hoping there are alternatives.
Thanks for the help.

Hi Mike,
You must open the system for changes, there is no way around this. This is usually not a major issue but if the security people are concerned, you can open a trace on the admin user in the OLTP source system.
I have been involved in cases where the security guys had to open the system and watch the source system creation - not sure they learnt anything but they signed off on it!
Cheers,
Mike.

Source system problem.

Similar Messages

Maybe you are looking for