Source system restore - Source system does not exist

Hello friends,
We have a problem. Now we have a new test system QA2. From BW system source system connection was configured for older test source system QA1.
We needed to route this source system to new system. I tried with changing RFC of QA1 to QA2 details.
Now, when i check RSA1 source system Check for QA1, i get this error :
Port 'A000000103 ' of type 'ALE ' does not exist
No destination exists to source system QA1
I can see this source system in RSA1 in BW. However, in WE21 port is not available now.
Please suggest.
I do not have to lose transfer rules/PSA tables..etc.
thanks
ashish

I get this when i try to restor connection :
Source system does not exist
Message no. RSAR175
Diagnosis
You have specified that you want to restore source system QA2. This source system is not known in BI.
System Response
The source system is not restored.
Procedure
Recreate the source system.
If the source system should be known to BI, the name of source system QA2 may be incorrect. Rename the source system and try the function again.

Similar Messages

  • Source system 8(ODS name) does not exist

    Hi experts!
    When I transport some Process Chane from DEV to PRD I faced with issue that the source system 8(ODS name) does not exist.
    Is anyone faced with same error?
    Thx!

    Hi.......
    Look.......
    U cannot Transport it........First Right click on the Infoprovider in PRD >> Export Datasource...........then replicate it from bw myself........
    U hav to generate it in Production also.............hav u done this before replication.....?
    Regards,
    Debjani....

  • Configured source directory .... does not exist was suppressed

    Hi,
    Below log is from PI 7.1 EHP1 system. I have tried to execute simple use cases from SDN but got below exception. The folder actually is there and there is not typing error. What could be the problem and any solution?
    Kind regards,
    Altug
    #2.0 #2010 05 11 01:57:10:002#+0300#Error#com.sap.aii.adapter.file.File2XI#
    #BC-XI-CON-AFW#com.sap.aii.af.lib#000C293D9117124200000000000007B0#9722350000001755##com.sap.aii.adapter.file.File2XI.getFileList(File2XIConfiguration.FileSource[])#J2EE_GUEST#0##488CE8105C4F11DF9D42000C293D9117#488ce8105c4f11df9d42000c293d9117#488ce8105c4f11df9d42000c293d9117#0#XI File2XI[XiPatternChannel_FileSender/PI7_FileSystem_XIPattern1/]_4767#Plain##
    Channel XiPatternChannel_FileSender: Directory C:
    work
    XIPattern1 does not exist#
    #2.0 #2010 05 11 01:57:10:002#+0300#Error#com.sap.aii.af.service.administration.impl.AlertingStatusListener#
    #BC-XI-CON-AFW#com.sap.aii.af.lib#000C293D9117124300000000000007B0#9722350000001755##com.sap.aii.af.service.administration.impl.AlertingStatusListener.run()#J2EE_GUEST#0##488CE8105C4F11DF9D42000C293D9117#488ce8105c4f11df9d42000c293d9117#488ce8105c4f11df9d42000c293d9117#0#XI AF AAM AlertingStatusListener$AsyncAlerter@67c2a0d6_4768#Java##
    Unable to raise alert for fatal process status (adapter :, channel ): com.sap.aii.af.service.alerting.AlertingException: An alert with suppress information:  Error Code:  Error Category:  Error text: Configured source directory 'C:
    work
    XIPattern1' does not exist was suppressed!Host:w2k3x64_PI7_00|AdapterType:File|Sender::PI7_FileSystem_XIPattern1|Receiver::|Interface:XiPatternInterface1:http://sap.com/xi/XI/System/Patterns|MsgID:null#3#http://sap.com/xi/XI/System#File#7be7f5b9e06c30cc97f90f55a21e150e#
    #2.0 #2010 05 11 01:57:20:002#+0300#Error#com.sap.aii.adapter.file.File2XI#
    #BC-XI-CON-AFW#com.sap.aii.af.lib#000C293D9117124400000000000007B0#9722350000001755##com.sap.aii.adapter.file.File2XI.getFileList(File2XIConfiguration.FileSource[])#J2EE_GUEST#0##488CE8105C4F11DF9D42000C293D9117#488ce8105c4f11df9d42000c293d9117#488ce8105c4f11df9d42000c293d9117#0#XI File2XI[XiPatternChannel_FileSender/PI7_FileSystem_XIPattern1/]_4769#Plain##
    Channel XiPatternChannel_FileSender: Directory C:
    work
    XIPattern1 does not exist#
    #2.0 #2010 05 11 01:57:20:017#+0300#Error#com.sap.aii.af.service.administration.impl.AlertingStatusListener#
    #BC-XI-CON-AFW#com.sap.aii.af.lib#000C293D9117124500000000000007B0#9722350000001755##com.sap.aii.af.service.administration.impl.AlertingStatusListener.run()#J2EE_GUEST#0##488CE8105C4F11DF9D42000C293D9117#488ce8105c4f11df9d42000c293d9117#488ce8105c4f11df9d42000c293d9117#0#XI AF AAM AlertingStatusListener$AsyncAlerter@1cfe7a5d_4770#Java##
    Unable to raise alert for fatal process status (adapter :, channel ): com.sap.aii.af.service.alerting.AlertingException: An alert with suppress information:  Error Code:  Error Category:  Error text: Configured source directory 'C:
    work
    XIPattern1' does not exist was suppressed!Host:w2k3x64_PI7_00|AdapterType:File|Sender::PI7_FileSystem_XIPattern1|Receiver::|Interface:XiPatternInterface1:http://sap.com/xi/XI/System/Patterns|MsgID:null#3#http://sap.com/xi/XI/System#File#7be7f5b9e06c30cc97f90f55a21e150e#
    #2.0 #2010 05 11 01:57:30:002#+0300#Error#com.sap.aii.adapter.file.File2XI#
    #BC-XI-CON-AFW#com.sap.aii.af.lib#000C293D9117124600000000000007B0#9722350000001755##com.sap.aii.adapter.file.File2XI.getFileList(File2XIConfiguration.FileSource[])#J2EE_GUEST#0##488CE8105C4F11DF9D42000C293D9117#488ce8105c4f11df9d42000c293d9117#488ce8105c4f11df9d42000c293d9117#0#XI File2XI[XiPatternChannel_FileSender/PI7_FileSystem_XIPattern1/]_4771#Plain##
    Channel XiPatternChannel_FileSender: Directory C:
    work
    XIPattern1 does not exist#
    #2.0 #2010 05 11 01:57:30:017#+0300#Error#com.sap.aii.af.service.administration.impl.AlertingStatusListener#
    #BC-XI-CON-AFW#com.sap.aii.af.lib#000C293D9117124700000000000007B0#9722350000001755##com.sap.aii.af.service.administration.impl.AlertingStatusListener.run()#J2EE_GUEST#0##488CE8105C4F11DF9D42000C293D9117#488ce8105c4f11df9d42000c293d9117#488ce8105c4f11df9d42000c293d9117#0#XI AF AAM AlertingStatusListener$AsyncAlerter@d023a80_4772#Java##
    Unable to raise alert for fatal process status (adapter :, channel ): com.sap.aii.af.service.alerting.AlertingException: An alert with suppress information:  Error Code:  Error Category:  Error text: Configured source directory 'C:
    work
    XIPattern1' does not exist was suppressed!Host:w2k3x64_PI7_00|AdapterType:File|Sender::PI7_FileSystem_XIPattern1|Receiver::|Interface:XiPatternInterface1:http://sap.com/xi/XI/System/Patterns|MsgID:null#3#http://sap.com/xi/XI/System#File#7be7f5b9e06c30cc97f90f55a21e150e#
    #2.0 #2010 05 11 01:57:40:002#+0300#Error#com.sap.aii.adapter.file.File2XI#
    #BC-XI-CON-AFW#com.sap.aii.af.lib#000C293D9117124800000000000007B0#9722350000001755##com.sap.aii.adapter.file.File2XI.getFileList(File2XIConfiguration.FileSource[])#J2EE_GUEST#0##488CE8105C4F11DF9D42000C293D9117#488ce8105c4f11df9d42000c293d9117#488ce8105c4f11df9d42000c293d9117#0#XI File2XI[XiPatternChannel_FileSender/PI7_FileSystem_XIPattern1/]_4773#Plain##
    Channel XiPatternChannel_FileSender: Directory C:
    work
    XIPattern1 does not exist#
    #2.0 #2010 05 11 01:57:40:002#+0300#Error#com.sap.aii.af.service.administration.impl.AlertingStatusListener#
    #BC-XI-CON-AFW#com.sap.aii.af.lib#000C293D9117124900000000000007B0#9722350000001755##com.sap.aii.af.service.administration.impl.AlertingStatusListener.run()#J2EE_GUEST#0##488CE8105C4F11DF9D42000C293D9117#488ce8105c4f11df9d42000c293d9117#488ce8105c4f11df9d42000c293d9117#0#XI AF AAM AlertingStatusListener$AsyncAlerter@76395415_4774#Java##
    Unable to raise alert for fatal process status (adapter :, channel ): com.sap.aii.af.service.alerting.AlertingException: An alert with suppress information:  Error Code:  Error Category:  Error text: Configured source directory 'C:
    work
    XIPattern1' does not exist was suppressed!Host:w2k3x64_PI7_00|AdapterType:File|Sender::PI7_FileSystem_XIPattern1|Receiver::|Interface:XiPatternInterface1:http://sap.com/xi/XI/System/Patterns|MsgID:null#3#http://sap.com/xi/XI/System#File#7be7f5b9e06c30cc97f90f55a21e150e#
    #2.0 #2010 05 11 01:57:50:002#+0300#Error#com.sap.aii.adapter.file.File2XI#
    #BC-XI-CON-AFW#com.sap.aii.af.lib#000C293D9117124A00000000000007B0#9722350000001755##com.sap.aii.adapter.file.File2XI.getFileList(File2XIConfiguration.FileSource[])#J2EE_GUEST#0##488CE8105C4F11DF9D42000C293D9117#488ce8105c4f11df9d42000c293d9117#488ce8105c4f11df9d42000c293d9117#0#XI File2XI[XiPatternChannel_FileSender/PI7_FileSystem_XIPattern1/]_4775#Plain##
    Channel XiPatternChannel_FileSender: Directory C:
    work
    XIPattern1 does not exist#
    #2.0 #2010 05 11 01:58:00:002#+0300#Error#com.sap.aii.adapter.file.File2XI#
    #BC-XI-CON-AFW#com.sap.aii.af.lib#000C293D9117124B00000000000007B0#9722350000001755##com.sap.aii.adapter.file.File2XI.getFileList(File2XIConfiguration.FileSource[])#J2EE_GUEST#0##488CE8105C4F11DF9D42000C293D9117#488ce8105c4f11df9d42000c293d9117#488ce8105c4f11df9d42000c293d9117#0#XI File2XI[XiPatternChannel_FileSender/PI7_FileSystem_XIPattern1/]_4777#Plain##
    Channel XiPatternChannel_FileSender: Directory C:
    work
    XIPattern1 does not exist#
    #2.0 #2010 05 11 01:58:00:002#+0300#Error#com.sap.aii.af.service.administration.impl.AlertingStatusListener#
    #BC-XI-CON-AFW#com.sap.aii.af.lib#000C293D9117124C00000000000007B0#9722350000001755##com.sap.aii.af.service.administration.impl.AlertingStatusListener.run()#J2EE_GUEST#0##488CE8105C4F11DF9D42000C293D9117#488ce8105c4f11df9d42000c293d9117#488ce8105c4f11df9d42000c293d9117#0#XI AF AAM AlertingStatusListener$AsyncAlerter@37d6d40_4778#Java##
    Unable to raise alert for fatal process status (adapter :, channel ): com.sap.aii.af.service.alerting.AlertingException: An alert with suppress information:  Error Code:  Error Category:  Error text: Configured source directory 'C:
    work
    XIPattern1' does not exist was suppressed!Host:w2k3x64_PI7_00|AdapterType:File|Sender::PI7_FileSystem_XIPattern1|Receiver::|Interface:XiPatternInterface1:http://sap.com/xi/XI/System/Patterns|MsgID:null#3#http://sap.com/xi/XI/System#File#7be7f5b9e06c30cc97f90f55a21e150e#

    Hi,
    Use this as a source directory mention the \ at last "C:
    work
    XIPattern1\"
    This doesn't help me. But later I give a permisson to the directory for everyone group. This time PI process worked and processed file.
    Thanks.
    Altug

  • Source message Message Type: POR does not exist in software component versi

    HI All,
    I have a .tpz file exported from an SRM 4.0 PI system which i have imported in SRM 7.0 ECC 6.0 PI.
    I have imported the .tpz file through the import through "client" option.
    I am able to open all the objects but i am not able to open the Message mappings.....
    It is throwing the following error:
    Source message Message Type: PurchaseOrderRequest does not exist in software component version xx_xx_PO_PROCESSING, 1.0 of xx.com Check whether software component version xx_xx_PO_PROCESSING, 1.0 of xx.com is in the Enterprise Services Repository. Import this or a newer version if necessary.
    This needs to resolved very urgently...
    Kindly help...
    Thanx in advance..
    Nandan

    Hi,
    I'd say you need to import some other SWCV which has all the IDOC typos you use in your scenario
    probably this is a prerequisite for importing your SWCV
    I don't think this is related to sp level or anything like that
    it's just that SWCV is missing
    Regards,
    Michal Krawczyk

  • Error in Local Message System: RFC destination MB3AP1039 does not exist.

    Error in Local Message System: RFC destination MB3AP1039 does not exist. Message was Not Created
    Message no. BCOS088
    Hi,
         When iam creating a message from any system from HELP-CREATE SUPPORT MESSAGE it is throwing the above error message. Actually i need to send this message to SAP solution Manager Service Desk.
    Can anyone help me in resolving the above issue.
    Thanks & Regards,
    Mirza Kaleemulla Baig.

    Dear friend
    You have to of following option
    1.Define Service Desk destination in the R/3 systems:
    Note: for this you need to log in the R/3 system.
    Create the RFC between the Solution manager and R/3 system (Login to the R/3 system)
    2.a. Go to transaction SM30.
    b. In table/view field, enter BCOS_CUST. Then press the Maintain Button. See example below:
    c. Press the Continue button in the following screen:
    d. You should see the following screen, no entries should be seen in the table. Press the New Entries button:
    e. In the next screen, enter the following information:
    In the RFC Destination you should point to your Solution Manager destination RFC.
    0ss_msg   w   sm_bsmclnt_back    cust620     1.0
    shailesh

  • Source System Activation - IDOC Type does not exist

    I'm doing a new installation of BI7 and when I want to activate the source system on  replicate Metadata Box and select "Only Activate" it comes up with error stating :Basic Type ZSxxxxx does not exist
    When I look in SE16 on table RSBASIDOC I can see the IDOC Type exist on both BW and R/3 Systems
    Any solution?

    Check my reply
    Re: "Basic Type Does Not Exist"

  • System.ServiceModel.Configuration.MachineSettingsSection does not exist

    Based on the instructions in this link for enabling logging of PII...
    https://msdn.microsoft.com/en-us/library/ms730318(v=vs.90).aspx
    None my versions - 3.5 -4.5.1 of .NET has a class System.ServiceModel.Configuration.MachineSettingsSection
    The only class with that name that exists is System.Transactions.Configuration.MachineSettingsSection
    I can only assume this is why it is not possible to add that section to machine.config, can anybody confirm this please?
    If so, then where should this section go in machine.config to enable PII logging?
    Thanks
    Jon

    The System.ServiceModel.Configuration.MachineSettingsSection class is indeed not public.
    But you can still add the enableLoggingKnownPii setting to a configuration file if this is what you want:
    Configuration machineConfig = ConfigurationManager.OpenMachineConfiguration();
    System.ServiceModel.Configuration.ServiceModelSectionGroup section = machineConfig.GetSectionGroup("system.serviceModel") as System.ServiceModel.Configuration.ServiceModelSectionGroup;
    foreach (ConfigurationSection s in section.Sections) {
    if(s.GetType().ToString().Equals("System.ServiceModel.Configuration.MachineSettingsSection"))
    string xml = s.SectionInformation.GetRawXml();
    if (xml == null)
    xml = string.Empty;
    s.SectionInformation.SetRawXml(xml + "<machineSettings enableLoggingKnownPii=\"true\"/>");
    machineConfig.Save();
    The other option is to just open the machine.config file in Notepad and add the enableLoggingKnownPii attribute manually:
    http://stackoverflow.com/questions/2325473/where-is-machine-config
    Hope that helps.
    Please remember to mark helpful posts as answer to close your threads and then start a new thread if you have a new question.

  • I can only get Firefox to start if I restore my system to an earlier date (the previous day for instance). If I just close down Firefox I cannot sart it up agian without a system restore -- yet it does not show as a task which is running after I click ont

    Restored machine. Opened Firefox - all is well.
    2. Closed Firefox. 3. Clicked on Firefocx shortcut - no Firefox ran. 4 Clicked on Firefox in program list - no Firefox ran.
    5. Restored to the previous restore point; clicked on Firefox shortcut - Firefox ran.
    == This happened ==
    Every time Firefox opened
    == a month ago.

    Thank you for your help Nattgew.
    Boinc is already running in the background as a service. There is no need to run "boinc" on the command line. The error you see is because it is trying to start Boinc again from the command line, but the service is already running and has claimed the port 31416.
    I know, it was in order to give all the possible feedback.
    I'm not sure why boincmgr won't connect... could you be more specific about what happens when you run it?
    No, I can't be more specific than I've already been above. I've described all that I see that happens.
    Other than that, the wiki tells you where to look at the log file (make sure there are no errors there) and explains the password for connecting (sounds like you already took care of that, but good to double check).
    As you can see I've searched all the errors I got in the boinc wiki. I know what they mean, but not why are happening.
    I think my problems come from a bad management of the files permissions by the package installation. I mean, when a package is installed there should be an script or something that modifies (or create the files with) the permissions that files must have, or create the groups that need to be created, and so on. But it looks like I have to modify all this data in order to get boincmngr connect to boinc, boinc and boincmngr get the writting permissions in the installation folder too, etc etc etc. I don't know very well how to do all this stuff (I mean that I've already created by hand the boinc group, changed the execution, access, modification of files with users and boinc groups credentials, and I still get silly errors as "boinc can't write" in a folder which is the owner, or can't write executed by the root. All this stuff messed me up because looks too much stupid), but more important, I shouldn't to do it manually after a package installation.
    I should open a bug report in arhlinux first and if they can't solve the problem open it in the boinc support, I suppose.

  • IDocStatus:Error in ALE service Cross-system company code does not exist

    HI All,
    I am sending CREMAS04 IDOC from XI to one R/3 system,and in R/3 a vendor should get created in master table.
    My IDOC is getting posted successfully but in R/3 system I am getting error that
    IDoc: 0000000000705816 Status: Error in ALE service
    T100 Text: Cross-system company code XXX does not exist
    I have created partner profiles in receiver system and in partner profiles I have set the process code as CRE1.
    Please help me to resolve this problem.

    Hi Shweta
    Have you checked with the data i.e. company code .
    May the company code which you are passing is not there in ur receiver system.
    Just check it out.
    Regards
    -Mitesh

  • File Adapter to iSeries IFS "Configured source directory does not exist"

    Good day, All
    We are using PI 7.1
    I need the PI file adapter to pull a file off of an iSeries(AS400) IFS folder directory.
    I'm able to configure the file adapter to pull off files from the PI server C and D drives.
    I'm able to configure the file adapter to pull off files from other network drives.
    But the iSeries IFS folder keeps coming back "does not exist".
    I've configured the Source Directory with / and with \ and it doesn't help.
    I am able to navigate to the folder while logged into the PI server as the server admin.
    I've tried mapping a drive on the server to the IFS folder but that doesn't work either.
    Please help!!!
    I've wasted too much time trying different settings on this already.
    Any assistance would be greatly appreciated.
    Thanks,
    Chad

    Dear Chad,
    Please go through the following SDN link :
    - Configured source directory .... does not exist was suppressed
    give the write permisson to the directory for everyone group and check if that helps.
    Also, kindly go through the following links :
    1) http://wiki.sdn.sap.com/wiki/display/XI/TroubleshootingtheFile+Adapter (point 2)
    2) Not able to read files from Windows directory to Unix Server using NFS
    which might give some hints in solving your issue.
    Best Regards
    Nishwanth

  • The sharemgr utility does not exist on my system

    OK... I need to use the sharemgr utility and it's not even installed on my Solaris 10 sparc system. It simply does not exist. There isn't even a man page on it. I installed the Entire Distribution plus OEM support. Anybody know how to get this utility installed? My release info is as follows:
    Solaris 10 10/08 s10s_u6wos_07b SPARC
    Copyright 2008 Sun Microsystems, Inc. All Rights Reserved.
    Use is subject to license terms.
    Assembled 27 October 2008

    This question is partially answered in the thread listed below. It also appears the sharemgr utility has not been ported to Solaris 10 Sparc, it's only included in Open Solaris. The file system/zfs/sharing stuff is still in flux and is being moved over to the Sparc is phases. Looks like some of the code has creeped into the Sparc while referencing utilities that have not been moved over yet.
    http://forums.sun.com/thread.jspa?messageID=10551779

  • Action &OBJECT_ID& does not exist - when Scrolling the Scrollbar in Table

    Hi All,
    When  executing the application of  ABAP webdynpro component  at runtime when we scroll the scrollbar of the table then we are getting the following dump. please let me know the solution to fix the issue.
    Thanks in advance.
    Dump
    The following error text was processed in the system BRD : Action &OBJECT_ID& does not exist
    The error occurred on the application server c700u043_BRD_10 and in the work process 1
    The termination type was : RBAX_STATE
    The ABAP call stack was:
    method : IF_WDR_RR_CONTROLLER~GET_ACTION of program SAPLWDR_RUNTIME_REPOSITORY
    method : GET_ACTION_INTERNAL of program CL_WDR_CONTROLLER----CP
    Thanks,
    PortalUser100

    Hi..
    I dnt get anything when i see the error, its like somewhere standard error. And are you trying to scroll horizontal or vertical scroll?
    Any way, we can achieve scrolling through one application parameter called wdtablenavigation and its value is SCROLLBAR.
    then you will get scroll bar for all tables in your component.
    Once you double click on appplication,you will find parameters tab, there pass the above values.
    Regards
    Srinivas

  • Action &OBJECT_ID& does not exist - when Filtering Table

    Hey Everyone,
                             I am trying to implement filtering on a table (not alv).. i have followed the example in DEMO_TABLE.
    - have put the method in WDDOMODIFYVIEW, bound the filtervalue of each column, and implememented a toggle button to show and hide filter row and gave it a filtering function.. - basically exactly like DEMO_TABLE.
    but, when i enter a filter value.. i get this error.
    The following error text was processed in the system LXA : Action &OBJECT_ID& does not exist
    The error occurred on the application server vmsaple07_LXA_00 and in the work process 0 .
    The termination type was: RABAX_STATE
    The ABAP call stack was:
    Method: IF_WDR_RR_CONTROLLER~GET_ACTION of program SAPLWDR_RUNTIME_REPOSITORY
    Method: GET_ACTION_INTERNAL of program CL_WDR_CONTROLLER=============CP
    Also, something else thats not right is.. if i put an action under ONFILTER of the table.. The filter row appears when i am on Workbench... BUT when i test the application on the browser, the filter row doesnt appear!.. it did appear once, but its not appearing anymore.
    Thanks...

    hey, i figured it out.. My problem was in this part of WDDOMODIFYVIEW...
    Set or cancel the table's filter action
    IF l_is_filter_on = abap_true.
    l_table->set_on_filter( 'FILTER' ).
    ELSE.
    l_table->set_on_filter( '' ).
    ENDIF.
    You must pass the name of filtering action in the above code.. Just create an action(like below), and pass the action name to the - l_table->set_on_filter( 'FILTER' ) - in WDDOMODIFYVIEW.
    method ONACTIONFILTER.
    wd_this->table_method_hndl->apply_filter( ).
    endmethod.
    Edited by: imatari on Jul 24, 2010 7:25 PM

  • Error in SAP installation ECC 6.0 "HKEY_LOCAL_MACHINE does not exist"

    Here is log  can any body suggest
    INFO 2009-02-21 10:17:02
    Connection request to guiengine backend by host 192.168.16.249 .
    INFO 2009-02-21 10:17:07
    Copied file 'C:/Program Files/sapinst_instdir/ERP/SYSTEM/ORA/CENTRAL/AS/inifile.xml' to 'C:/Program Files/sapinst_instdir/ERP/SYSTEM/ORA/CENTRAL/AS/inifile.2.xml'.
    INFO 2009-02-21 10:17:07
    Copied file 'C:/Program Files/sapinst_instdir/ERP/SYSTEM/ORA/CENTRAL/AS/inifile.xml' to 'C:/Program Files/sapinst_instdir/ERP/SYSTEM/ORA/CENTRAL/AS/inifile.3.xml'.
    INFO 2009-02-21 10:17:07
    Copied file 'C:/Program Files/sapinst_instdir/ERP/SYSTEM/ORA/CENTRAL/AS/keydb.xml' to 'C:/Program Files/sapinst_instdir/ERP/SYSTEM/ORA/CENTRAL/AS/keydb.2.xml'.
    INFO 2009-02-21 10:17:07
    Execute step changeUserInstall of component |NW_Onehost|ind|ind|ind|ind|0|0|NW_First_Steps|ind|ind|ind|ind|0|0|Preinstall|ind|ind|ind|ind|0|0.
    INFO 2009-02-21 10:17:23
    Creating file C:\Program Files\sapinst_instdir\ERP\SYSTEM\ORA\CENTRAL\AS\change.log.
    INFO 2009-02-21 10:17:23
    Output of change user /install is written to the logfile change.log.
    WARNING 2009-02-21 10:17:23
    Execution of the command "change user /install" finished with return code 1. Output:
    Install mode does not apply to a Terminal server configured for remote administration.
    INFO 2009-02-21 10:17:23
    Execute step chgautInstdirPublicAllOS4 of component |NW_Onehost|ind|ind|ind|ind|0|0|NW_First_Steps|ind|ind|ind|ind|0|0|Preinstall|ind|ind|ind|ind|0|0.
    INFO 2009-02-21 10:17:42
    Execute step done of component |NW_Onehost|ind|ind|ind|ind|0|0|NW_First_Steps|ind|ind|ind|ind|0|0.
    INFO 2009-02-21 10:17:42
    Execute step checkParams of component |NW_Onehost|ind|ind|ind|ind|0|0.
    INFO 2009-02-21 10:17:42
    Execute step fillContextForSoftwareFeatures of component |NW_Onehost|ind|ind|ind|ind|0|0.
    INFO 2009-02-21 10:17:43
    Execute step loadUsageTypes of component |NW_Onehost|ind|ind|ind|ind|0|0|SAP_Software_Features_Init|ind|ind|ind|ind|2|0.
    INFO 2009-02-21 10:17:44
    Execute step fillContextUsageTypes of component |NW_Onehost|ind|ind|ind|ind|0|0|SAP_Software_Features|ind|ind|ind|ind|3|0.
    INFO 2009-02-21 10:17:44
    Execute step setAllPossible of component |NW_Onehost|ind|ind|ind|ind|0|0|SAP_Software_Features|ind|ind|ind|ind|3|0|SAP_Software_Features_Prepare|ind|ind|ind|ind|0|0.
    INFO 2009-02-21 10:17:45
    Copied file 'C:/Program Files/sapinst_instdir/ERP/SYSTEM/ORA/CENTRAL/AS/usages_data.xml' to 'C:/Program Files/sapinst_instdir/ERP/SYSTEM/ORA/CENTRAL/AS/usages_data.1.xml'.
    INFO 2009-02-21 10:17:45
    Copied file 'C:/Program Files/sapinst_instdir/ERP/SYSTEM/ORA/CENTRAL/AS/usages_data.xml' to 'C:/Program Files/sapinst_instdir/ERP/SYSTEM/ORA/CENTRAL/AS/usages_data.2.xml'.
    INFO 2009-02-21 10:17:45
    Copied file 'C:/Program Files/sapinst_instdir/ERP/SYSTEM/ORA/CENTRAL/AS/jexclude.xml' to 'C:/Program Files/sapinst_instdir/ERP/SYSTEM/ORA/CENTRAL/AS/jexclude.1.xml'.
    INFO 2009-02-21 10:17:45
    Execute step determineScenarioParameters of component |NW_Onehost|ind|ind|ind|ind|0|0|SAP_Software_Features|ind|ind|ind|ind|3|0|SAP_Software_Features_Prepare|ind|ind|ind|ind|0|0.
    INFO 2009-02-21 10:17:45
    Execute step prepareUsagesTableForUserInputXml of component |NW_Onehost|ind|ind|ind|ind|0|0|SAP_Software_Features|ind|ind|ind|ind|3|0|SAP_Software_Features_Prepare|ind|ind|ind|ind|0|0.
    INFO 2009-02-21 10:17:46
    Execute step determinePossibleUsageTypesXml of component |NW_Onehost|ind|ind|ind|ind|0|0|SAP_Software_Features|ind|ind|ind|ind|3|0|SAP_Software_Features_Prepare|ind|ind|ind|ind|0|0.
    INFO 2009-02-21 10:17:47
    Execute step prepareUsagesTableForUserInputDB of component |NW_Onehost|ind|ind|ind|ind|0|0|SAP_Software_Features|ind|ind|ind|ind|3|0|SAP_Software_Features_Prepare|ind|ind|ind|ind|0|0.
    INFO 2009-02-21 10:17:47
    Execute step setDefaultsGuiValues of component |NW_Onehost|ind|ind|ind|ind|0|0|SAP_Software_Features|ind|ind|ind|ind|3|0|SAP_Software_Features_Prepare|ind|ind|ind|ind|0|0.
    INFO 2009-02-21 10:17:47
    Execute step setDefaultsStackDetermined of component |NW_Onehost|ind|ind|ind|ind|0|0|SAP_Software_Features|ind|ind|ind|ind|3|0|SAP_Software_Features_Prepare|ind|ind|ind|ind|0|0.
    INFO 2009-02-21 10:17:47
    Execute step chooseMandatory of component |NW_Onehost|ind|ind|ind|ind|0|0|SAP_Software_Features|ind|ind|ind|ind|3|0|SAP_Software_Features_Prepare|ind|ind|ind|ind|0|0.
    INFO 2009-02-21 10:17:48
    Execute step makeABAPPartsImpossible of component |NW_Onehost|ind|ind|ind|ind|0|0|SAP_Software_Features|ind|ind|ind|ind|3|0|SAP_Software_Features_Prepare|ind|ind|ind|ind|0|0.
    INFO 2009-02-21 10:17:48
    Execute step setDependencyRestrictions of component |NW_Onehost|ind|ind|ind|ind|0|0|SAP_Software_Features|ind|ind|ind|ind|3|0|SAP_Software_Features_Prepare|ind|ind|ind|ind|0|0.
    INFO 2009-02-21 10:17:49
    Execute step prepareScenario of component |NW_Onehost|ind|ind|ind|ind|0|0|SAP_Software_Features|ind|ind|ind|ind|3|0|SAP_Software_Features_Select|ind|ind|ind|ind|1|0.
    INFO 2009-02-21 10:17:49
    Execute step fillUsagesTable of component |NW_Onehost|ind|ind|ind|ind|0|0|SAP_Software_Features|ind|ind|ind|ind|3|0|SAP_Software_Features_Select|ind|ind|ind|ind|1|0.
    INFO 2009-02-21 10:17:50
    Execute step selectUsages of component |NW_Onehost|ind|ind|ind|ind|0|0|SAP_Software_Features|ind|ind|ind|ind|3|0|SAP_Software_Features_Select|ind|ind|ind|ind|1|0.
    INFO 2009-02-21 10:18:00
    Execute step selectUsagesNetWeaver of component |NW_Onehost|ind|ind|ind|ind|0|0|SAP_Software_Features|ind|ind|ind|ind|3|0|SAP_Software_Features_Select|ind|ind|ind|ind|1|0.
    INFO 2009-02-21 10:18:03
    Execution of the command "C:\j2sdk1.4.2_08\bin\java.exe -classpath C:/DOCUME1/ADMINI1/LOCALS~1/Temp/sapinst_exe.1988.1235191614/JAR/ins-j2ee.jar com.sap.ins.j2ee.GetSystemProperty" finished with return code 0. Output:
    #Sat Feb 21 10:18:03 GMT+05:30 2009
    java.runtime.name=Java(TM) 2 Runtime Environment, Standard Edition
    sun.boot.library.path=C\:
    j2sdk1.4.2_08
    jre
    bin
    java.vm.version=1.4.2_08-b03
    java.vm.vendor=Sun Microsystems Inc.
    java.vendor.url=http\://java.sun.com/
    path.separator=;
    java.vm.name=Java HotSpot(TM) Client VM
    file.encoding.pkg=sun.io
    user.country=US
    sun.os.patch.level=Service Pack 1
    java.vm.specification.name=Java Virtual Machine Specification
    user.dir=C\:
    PROGRA1
    SAPINS1
    ERP
    SYSTEM
    ORA
    CENTRAL
    AS
    java.runtime.version=1.4.2_08-b03
    java.awt.graphicsenv=sun.awt.Win32GraphicsEnvironment
    java.endorsed.dirs=C\:
    j2sdk1.4.2_08
    jre
    lib
    endorsed
    os.arch=x86
    java.io.tmpdir=C\:
    DOCUME1
    ADMINI1
    LOCALS~1
    Temp
    line.separator=\r\n
    java.vm.specification.vendor=Sun Microsystems Inc.
    user.variant=
    os.name=Windows 2003
    sun.java2d.fontpath=
    java.library.path=C\:
    j2sdk1.4.2_08
    bin;.;C\:
    WINDOWS
    system32;C\:
    WINDOWS;D\:
    oracle
    product
    10.2.0
    db_1
    bin;C\:
    WINDOWS
    system32;C\:
    WINDOWS;C\:
    WINDOWS
    System32
    Wbem;%JAVA_HOME%/bin
    java.specification.name=Java Platform API Specification
    java.class.version=48.0
    java.util.prefs.PreferencesFactory=java.util.prefs.WindowsPreferencesFactory
    os.version=5.2
    user.home=C\:
    Documents and Settings
    Administrator
    user.timezone=GMT+05\:30
    java.awt.printerjob=sun.awt.windows.WPrinterJob
    file.encoding=Cp1252
    java.specification.version=1.4
    java.class.path=C\:/DOCUME1/ADMINI1/LOCALS~1/Temp/sapinst_exe.1988.1235191614/JAR/ins-j2ee.jar
    user.name=Administrator
    java.vm.specification.version=1.0
    java.home=C\:
    j2sdk1.4.2_08
    jre
    sun.arch.data.model=32
    user.language=en
    java.specification.vendor=Sun Microsystems Inc.
    awt.toolkit=sun.awt.windows.WToolkit
    java.vm.info=mixed mode
    java.version=1.4.2_08
    java.ext.dirs=C\:
    j2sdk1.4.2_08
    jre
    lib
    ext
    sun.boot.class.path=C\:
    j2sdk1.4.2_08
    jre
    lib
    rt.jar;C\:
    j2sdk1.4.2_08
    jre
    lib
    i18n.jar;C\:
    j2sdk1.4.2_08
    jre
    lib
    sunrsasign.jar;C\:
    j2sdk1.4.2_08
    jre
    lib
    jsse.jar;C\:
    j2sdk1.4.2_08
    jre
    lib
    jce.jar;C\:
    j2sdk1.4.2_08
    jre
    lib
    charsets.jar;C\:
    j2sdk1.4.2_08
    jre
    classes
    java.vendor=Sun Microsystems Inc.
    file.separator=
    java.vendor.url.bug=http\://java.sun.com/cgi-bin/bugreport.cgi
    sun.io.unicode.encoding=UnicodeLittle
    sun.cpu.endian=little
    sun.cpu.isalist=pentium i486 i386
    INFO 2009-02-21 10:18:03
    Execution of the command "C:\j2sdk1.4.2_08\bin\java.exe -classpath C:/DOCUME1/ADMINI1/LOCALS1/Temp/sapinst_exe.1988.1235191614/JAR/ins-j2ee.jar;C:/DOCUME1/ADMINI1/LOCALS1/Temp/sapinst_exe.1988.1235191614/JAR/sapxmltoolkit.jar com.sap.ins.j2ee.TestClassLoader" finished with return code 0. Output:
    CORRECT
    INFO 2009-02-21 10:18:03
    Found a valid JAVA_HOME directory C:\j2sdk1.4.2_08 with JDK version 1.4.2_08.
    INFO 2009-02-21 10:18:03
    Execute step getCD of component |NW_Onehost|ind|ind|ind|ind|0|0|NW_Onehost_System|ind|ind|ind|ind|1|0|NW_getJavaHome|ind|ind|ind|ind|0|0.
    INFO 2009-02-21 10:18:03
    Execute step verifyJavaHome of component |NW_Onehost|ind|ind|ind|ind|0|0|NW_Onehost_System|ind|ind|ind|ind|1|0|NW_getJavaHome|ind|ind|ind|ind|0|0.
    INFO 2009-02-21 10:18:03
    Execute step verifyPolicy of component |NW_Onehost|ind|ind|ind|ind|0|0|NW_Onehost_System|ind|ind|ind|ind|1|0|NW_getJavaHome|ind|ind|ind|ind|0|0.
    INFO 2009-02-21 10:18:04
    Execute step setNWOption of component |NW_Onehost|ind|ind|ind|ind|0|0|NW_Onehost_System|ind|ind|ind|ind|1|0|NW_getJavaHome|ind|ind|ind|ind|0|0.
    INFO 2009-02-21 10:18:04
    Execution of the command "C:\j2sdk1.4.2_08\bin\java.exe -classpath C:/DOCUME1/ADMINI1/LOCALS~1/Temp/sapinst_exe.1988.1235191614/JAR/ins-j2ee.jar com.sap.ins.j2ee.GetSystemProperty" finished with return code 0. Output:
    #Sat Feb 21 10:18:04 GMT+05:30 2009
    java.runtime.name=Java(TM) 2 Runtime Environment, Standard Edition
    sun.boot.library.path=C\:
    j2sdk1.4.2_08
    jre
    bin
    java.vm.version=1.4.2_08-b03
    java.vm.vendor=Sun Microsystems Inc.
    java.vendor.url=http\://java.sun.com/
    path.separator=;
    java.vm.name=Java HotSpot(TM) Client VM
    file.encoding.pkg=sun.io
    user.country=US
    sun.os.patch.level=Service Pack 1
    java.vm.specification.name=Java Virtual Machine Specification
    user.dir=C\:
    PROGRA1
    SAPINS1
    ERP
    SYSTEM
    ORA
    CENTRAL
    AS
    java.runtime.version=1.4.2_08-b03
    java.awt.graphicsenv=sun.awt.Win32GraphicsEnvironment
    java.endorsed.dirs=C\:
    j2sdk1.4.2_08
    jre
    lib
    endorsed
    os.arch=x86
    java.io.tmpdir=C\:
    DOCUME1
    ADMINI1
    LOCALS~1
    Temp
    line.separator=\r\n
    java.vm.specification.vendor=Sun Microsystems Inc.
    user.variant=
    os.name=Windows 2003
    sun.java2d.fontpath=
    java.library.path=C\:
    j2sdk1.4.2_08
    bin;.;C\:
    WINDOWS
    system32;C\:
    WINDOWS;D\:
    oracle
    product
    10.2.0
    db_1
    bin;C\:
    WINDOWS
    system32;C\:
    WINDOWS;C\:
    WINDOWS
    System32
    Wbem;%JAVA_HOME%/bin
    java.specification.name=Java Platform API Specification
    java.class.version=48.0
    java.util.prefs.PreferencesFactory=java.util.prefs.WindowsPreferencesFactory
    os.version=5.2
    user.home=C\:
    Documents and Settings
    Administrator
    user.timezone=GMT+05\:30
    java.awt.printerjob=sun.awt.windows.WPrinterJob
    file.encoding=Cp1252
    java.specification.version=1.4
    java.class.path=C\:/DOCUME1/ADMINI1/LOCALS~1/Temp/sapinst_exe.1988.1235191614/JAR/ins-j2ee.jar
    user.name=Administrator
    java.vm.specification.version=1.0
    java.home=C\:
    j2sdk1.4.2_08
    jre
    sun.arch.data.model=32
    user.language=en
    java.specification.vendor=Sun Microsystems Inc.
    awt.toolkit=sun.awt.windows.WToolkit
    java.vm.info=mixed mode
    java.version=1.4.2_08
    java.ext.dirs=C\:
    j2sdk1.4.2_08
    jre
    lib
    ext
    sun.boot.class.path=C\:
    j2sdk1.4.2_08
    jre
    lib
    rt.jar;C\:
    j2sdk1.4.2_08
    jre
    lib
    i18n.jar;C\:
    j2sdk1.4.2_08
    jre
    lib
    sunrsasign.jar;C\:
    j2sdk1.4.2_08
    jre
    lib
    jsse.jar;C\:
    j2sdk1.4.2_08
    jre
    lib
    jce.jar;C\:
    j2sdk1.4.2_08
    jre
    lib
    charsets.jar;C\:
    j2sdk1.4.2_08
    jre
    classes
    java.vendor=Sun Microsystems Inc.
    file.separator=
    java.vendor.url.bug=http\://java.sun.com/cgi-bin/bugreport.cgi
    sun.io.unicode.encoding=UnicodeLittle
    sun.cpu.endian=little
    sun.cpu.isalist=pentium i486 i386
    INFO 2009-02-21 10:18:04
    Execution of the command "C:\j2sdk1.4.2_08\bin\java.exe -classpath
    finished with return code 0. Output:
    CORRECT
    INFO 2009-02-21 10:18:04
    Found a valid JAVA_HOME directory C:\j2sdk1.4.2_08 with JDK version 1.4.2_08.
    INFO 2009-02-21 10:18:04
    Execute step collect of component |NW_Onehost|ind|ind|ind|ind|0|0|NW_Onehost_System|ind|ind|ind|ind|1|0|NW_GetSidNoProfiles|ind|ind|ind|ind|1|0.
    WARNING 2009-02-21 10:18:05
    *Error 5 (Access is denied.
    ) in execution of a 'RegOpenKeyEx' function, line (69), with parameter (SYSTEM\CurrentControlSet\Services\ltpsnr).*
    *WARNING 2009-02-21 10:18:05
    The subkey 'HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Services\ltpsnr' does not exist on the 'localhost' host.*
    *ERROR 2009-02-21 10:18:05
    MOS-01185  The subkey 'HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Services\ltpsnr' does not exist on the 'localhost' host.*
    ERROR 2009-02-21 10:18:05
    FCO-00011  The step collect with step key |NW_Onehost|ind|ind|ind|ind|0|0|NW_Onehost_System|ind|ind|ind|ind|1|0|NW_GetSidNoProfiles|ind|ind|ind|ind|1|0|collect was executed with status ERROR .
    INFO 2009-02-21 10:19:50
    An error occured and the user decided to retry the current step: "|NW_Onehost|ind|ind|ind|ind|0|0|NW_Onehost_System|ind|ind|ind|ind|1|0|NW_GetSidNoProfiles|ind|ind|ind|ind|1|0|collect".
    WARNING 2009-02-21 10:19:50
    Error 5 (Access is denied.
    ) in execution of a 'RegOpenKeyEx' function, line (69), with parameter (SYSTEM\CurrentControlSet\Services\ltpsnr).
    WARNING 2009-02-21 10:19:50
    The subkey 'HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Services\ltpsnr' does not exist on the 'localhost' host.
    ERROR 2009-02-21 10:19:50
    MOS-01185  The subkey 'HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Services\ltpsnr' does not exist on the 'localhost' host.
    ERROR 2009-02-21 10:19:50
    FCO-00011  The step collect with step key |NW_Onehost|ind|ind|ind|ind|0|0|NW_Onehost_System|ind|ind|ind|ind|1|0|NW_GetSidNoProfiles|ind|ind|ind|ind|1|0|collect was executed with status ERROR .
    INFO 2009-02-21 10:21:43
    An error occured and the user decide to stop.\n Current step "|NW_Onehost|ind|ind|ind|ind|0|0|NW_Onehost_System|ind|ind|ind|ind|1|0|NW_GetSidNoProfiles|ind|ind|ind|ind|1|0|collect".
    please provide me the solution .....

    Hello,
    this error is really strange. At this step, sapinst scans all keys that are located under
    HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Services
    in order to find existing SAP services and to retrieve their parameters. Since this usually happens in a sorted way, many other keys must have already been successfully retrieved.
    My guess is now that there is a problem that is related just to the service that was processed in the current iteration: ltpsnr
    -> call regedit and go to HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Services
    -> locate the ltpsnr entry, is it actually there? If yes:
    -> right click on the entry and chose 'permissions'
    -> are the permissions here actually different compared to the other entries?
    Best Regards,
    Michael

  • Installation Fails :/ yxefkoe does not exist on the 'localhost' host

    Hi Guys,
    I am trying to install NetWeaver 7.0 SR1 including Enhancement Package 1 > SAP Application Server ABAP > MaxDB > Central System > Central System on my pc. But I`m getting following error.
    The subkey 'HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Services\yxefkoe' does not exist on the 'localhost' host.
    Here is the dump from the log file.
    WARNING 2010-10-24 17:52:45.781
    Error 5 (Access is denied.
    ) in execution of a 'RegOpenKeyEx' function, line (81), with parameter (SYSTEM\CurrentControlSet\Services\yxefkoe).
    WARNING 2010-10-24 17:52:45.781
    The subkey 'HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Services\yxefkoe' does not exist on the 'localhost' host.
    ERROR 2010-10-24 17:52:45.781
    MOS-01185  The subkey 'HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Services\yxefkoe' does not exist on the 'localhost' host.
    ERROR 2010-10-24 17:52:45.781
    FCO-00011  The step collect with step key |NW_ABAP_OneHost|ind|ind|ind|ind|0|0|NW_Onehost_System|ind|ind|ind|ind|2|0|NW_GetSidNoProfiles|ind|ind|ind|ind|1|0|collect was executed with status ERROR ( Last error reported by the step :The subkey 'HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Services\yxefkoe' does not exist on the 'localhost' host.).
    I have installed the Microsoft Loopback network adapter. And C:\WINDOWS\system32\drivers\etc\hosts file contains following entries.
    127.0.0.1       localhost
    10.10.0.10      anuja
    10.10.0.10 being the address given to the Loopback connection and anuja is the hostname.
    Please help me to solve this issue.
    Thanks!

    Thank you PR Srinivas and Khaiser.
    Actually I wish to explain how I solved the problem. I went to the key through the registry path. But saw that there was the folder present in the path but it was blank.
    So I right clicked on the folder went to Permission. I tried giving Full Control Permission for 'System' user name which did not solve the problem.
    Hence in the Permission option of yxefkoe registry key I clicked on Add. In the 'Select Groups or User' popup window I clicked on 'Advanced' option and then clicked on 'Find Now'. I selected the user name which I use to log in to windows and applied the changes.
    After all these steps I found entries in the registry folder 'yxefkoe'. I right clicked on the yxefkoe folder and went to Permissions - > Gave Full Control to the newly added user name.
    And then the problem was solved.
    So I guess when you should find two users in the Permissions option on the yxefkoe folder.
    1. System
    2. User name which u use to log into windows. -- > It is displayed like this --> User_Name(Hostname/User_Name)
    Correct me if i am incorrect here.
    Thanks a lot for the help!

  • "Failed to debug the Windows Azure Cloud Service project. The Output directory .... does not exist" - Looking for Solution Config Name Folder?

    Good evening,
    I've been working on and with a VS2013 Update 2 / Azure SDK 2.3 Cloud Service project for a while now and never had a problem debugging it (setting the .ccproj Project as Startup Project) but at the moment I cannot Debug it anymore - I always get the following
    error message:
    Failed to debug the Windows Azure Cloud Service project.  The output directory 'D:\Workspace\Development\Sources\AzureBackend\csx\Backend - Debug' does not exist.
    Now what's odd here, is the last part - the "Backend - Debug" is the Solution configuration name, ALL projects in that particular solution configuration are set to the Debug Configuration. The .ccproj file also only specifies Debug|Any CPU (and
    Release|Any CPU respectively) as its output folder(s). Why is the Solution config appearing up there?
    And more importantly.. why is this happening and what can I do?!
    Thanks,
    -Jörg
    Ps: there seems to be a related
    connect bug and these sorts of issues do appear around the forums but none contains a solution (neither reinstalling the Azure SDK nor cloaking the workspace/re-retrieving & building everything worked).

    Good morning Jambor,
    I already tried de-installing everything Azure-Tooling related including the Azure SDK, Restarting my machine and re-installing the SDK.
    Same result. I can build the .ccproj perfectly fine and the cspack file IS generated perfectly fine, only debugging does not work and there's NO information in the VS output window (again - all projects succeed to build).
    I tried explicitely running VS as Administrator, no change. I removed all IIS Express sites (as the ccproj has one web worker role), remapped my local TFS workspace.. nothing helped.
    As building works, deploying to Azure Cloud Service (manually and via Publish inside VS) all works -perfectly-, I am pretty sure this IS a bug and I'd LOVE to help to get this fixed. As I said, currently I cannot debug and/or run & test my work, hence
    I cannot do ANY work.

Maybe you are looking for

  • My Experience Today

    I would like to start out by stating that before today I have been treated well by most representatives from Verizon Wireless.  But after today's experience, I can honestly say I have never been treated with more disrespect or dealt with someone who

  • SYS Reqs for a scanner using Acrobat 9

    Using Windows for Acrobat 9. What would be the systems requirements for a scanner using Acrobat 9?

  • 9926 do not read AutoUnattend.xml from USB Key

    I had used a USB Key with an Autounattend.xml answer file from Windows Vista, Windows 7, Windows 8 until Windows 10 version 9979 without no problem. 9926 do not read at all AutoUnattend.XML. I am interestind to know if somobody else had tried to depl

  • Conversion_to_local_currency

    CALL FUNCTION 'CONVERT_TO_LOCAL_CURRENCY'                 EXPORTING                   date                    = sy-datum                   foreign_amount          = itab_line-net_value                   foreign_currency        = itab_line-waers      

  • On 11.2.0.1 cannot change REMOTE_LISTENER parameter

    [oracle@rs1pre91dvdba01 oracle]$ sqlplus / as sysdba SQL*Plus: Release 11.2.0.1.0 Production on Thu Apr 7 11:14:00 2011 Copyright (c) 1982, 2009, Oracle. All rights reserved. Connected to: Oracle Database 11g Enterprise Edition Release 11.2.0.1.0 - 6