Source system RFC fails after transport

Hi all
in our QA system any transport containing a process chain causes the RFC connection to the source ECC6 system to fail after too many logon attempts.
This doesn't happen when we send the same transport to production.
Any ideas?
Regards
Hayley

Hi
thanks, but I had already checked out this note. This refers to the post processing of the transport on BW of client 000 logging onto the BW client to carry out changes, not the RFC connection to the BW ECC source system.
The transport goes through ok, and the process chain can be activated, however at this point we always notice that the ECC source system connection fails with an RFC error, as soon as we get the password reset and changed in SM59 it works ok.

Similar Messages

Assignment of Source System in quality after transport

Hi Experts,
We have implemented the Inventory management standard flow in Development,
Now to tell you, we have multiple landscape over here,
Depending on the project, and the fesiblility for the client, the tranport layer is been decided,
But for sure we have multiple source system,
By multiple source system, i mean not the other components like R/3, SRM or APO,
but for R/3 itself we have multiple boxes at each layer,
Now when transported to quality,
the standard objects are reflecting after few errors corrected and re transports,
But the source system which it has picked for the BF BX and UM datasource is not that i require according to the transports landing for the R/3 developments,
AT DEVELOPMENT LAYER,
BW development is GDA, which is having the source system connection to development R/3 (GD0),
AT QUALITY
We have BW as EQ3,
For R/3 we have EQ0 and NR0,
All the transports have reached in the respective target quality system,
But the data sources are having source system connection to NR0 and not EQ0,
I want it to be EQ0 as the data lies over there.
How do i resolve this ?
Thanks and should be appricated for your efforts in helping.

Hi Daljeet,
You should set the Source system Conversion option in Transport Connection before Transporting the objects to QA and PRD.
You can do this using the button 'Conversion' next to the button 'Source System Assignment'. Here you can specify the Target source system name after the Transport.
If you want to change all the assignments from NR0 to EQ0, this article will be helpful for you.
http://www.sdn.sap.com/irj/scn/index?rid=/library/uuid/805eefcd-5428-2d10-c0ab-dc27a95b2c81
Get the help of your BASIS team also.
Refer this thread.
Re: source system in RSA1 is diiferent to the datasource in infoprovider

Conversion of source system names --- error in transport

hi
i want to transport my object from Dev111 to Quality222
but the transport ended up in error 8
it gave the error...
Source system PRODUCTION333 does not exist
I am confused,
shouldnot it should give error related to Quality system ???
how should be the mapping in Source system names?
after research it seems it should be maintained in
RSA1-TOOLS-mapping of SOURCE SYSTEM NAMES.
i have following systems...
BW- DEV111 QUTY222 PDN333
R3 DEV121 QUTY242 PDN363
What should the entries look like in which system

Landscape is -Transport should be send from Deve-Quality---Production
BW....................................
DEV111 QUTY222 PDN333
R3.....................................
DEV121 QUTY242 PDN363
CAN you advise if the entries SHOULD look like below in Quality and Production System???
Quality system should have entries like:
bw DEV111.............. bw Quality 222
r3 DEV121................ bw Quality222
Production system should have entries like:
bw Quality222.............. bw Production333
r3 DEV242................ bw Production333
Q1 ......IS THIS HOW ENTRIES SHOULD BE IN Quality & Production system???

Transfer rules to the new source system not visible in Transport connection

Dear All,
Recently our source system has been changed from R3 4.7 to ECC 6.O. Corresponding to that all the activities in BI have finished successfully. All my datasources in 4.7 have been replicated in ECC 6 in BI and transfer rules re-assigned. I have also collected them in a Transport request.
Now when I am checking the entire flow in Transport connection, it shows me the transfer rules pointing to the old system only. That is, in RSA1 it shows the new system assignment. But in Transport connection not.
What I have to do so that I can crosscheck in Transport connection all my objects having transfer rules to new system ?
Regards,
Srinivas

I think you should check the source system assignment in the transport connection. It might have directed to the old sytem.
Cheers
Chanda

Source System Does Not Exist - Transport Problem

Hi
We have the next Landscape in BW 7.0 (Netweaver 2004's)
LRDCLNT300     is R3 DEV
LRQCLNT700     is R3 QA
LBDCLNT100     is BW DEV
LBQCLNT700     is BW QA
The connections are
LBDCLNT100 (BW Dev) use as source system        LRDCLNT300 (R3 Dev)
LBQCLNT700 (BW QA) use as source system        LRQCLNT700 (R3 QA)
In RSA1->TOOLS -> Conversion of Logical System Names
In Conversion of source system after the transport we have these entries
Source System                    Target System
LBDCLNT100 (BW Dev)         LBQCLNT700 (BW QA)
LRDCLNT300 (R3   Dev)         LRQCLNT700 (BW QA)
But when we transport an order from BW DEV to BW QA show the error "source system LRDCLNT300 does not exist"
Never made the conversion of source system after the transport.
Can you help us please.

Thanks Edwin
     I create a RFC for LRDCLNT300 (R3 Dev) in my BW QA system (Target System).
I try an order again but it didn't work, also I try to check 7.0 checkbox but I got the message "No entry exists for original source system LBDCLNT100 for 3.x object"
and I have to uncheck again.
I still have the same problem the objects are associated to R3 Dev, never make the conversion to R3 QA.

Source System Connection Issue after BI 7 Upgrade

Hi all,
We have just upgraded from BW 3.1 to BI 7.
After the upgrade, I checked the connection to our R3 4.6 source system.
It is now saying the following message:
Source system XXX is marked as inactive in BI.
Check failed for RFC connection XXX ; check destination
After going through the RFC connection, I tested the connection for this source system. It said OK. While doing the authorization test, it said: "Name or password is incorrect. Please re-enter".
The thing is that our name & password ARE correct definitely.
Is there any issues post upgrade because authorization stuff between R.3 4.6 (PI 2004.1 SP15) and BI 7?
Any ideas?
Thank you
chris

Hi,
as from NW7.0, passwords are case-sensitive.
If you define the passwords in the RFC in uppercase, it will work.
This is a problem when you link an 'old' (not NW 7.0) system to a NW 7.0 (as in this one, passwords are case-sensitive).

No username of Source system is avbl after livecache system copy

Hi Experts
I have done a livecache system copy from the source system to target system. Here the steps are
Assume my Source SYstem Livecache is RP1 and Target System livecache is RS1.
1. Taken Source system livecache DATA and LOG Area backup RP1.
2. Defined the same source system backup medium name in Target System (RS1 and moving the Source system Liveacache backuped files to Target system and defined the medium name as per that)
3. put the livecache db_admin mode
4. db_activate RECOVER <medium_name>.
5. recover_start <log_medium_name> LOG <nnn>
6. db_online.
Here we faced that
ERR
-24622,ERR_AUTOLOADSYSTAB: Automatic loading of the System Tables failed
-24907,ERR_DBAWRONG: Wrong database system administrator
-24988,ERR_SQL: SQL error
-4008,Unknown user name/password combination
So we activated the SUPERDBA as " db_activate SUPERDBA,<password>
then it came to online. and afterwards we have used the load_systab command to load the tables.
BUT we could not find any Source System name like "RP1ADM" in the tables of the livecache database. Only there are CONTROL,SUPERDBA username availbale. Usually there will be also the source admin name . I dont know why it is missing
Before a month we have done livecahe restore same as now in that time we got the source system name admin also. ( RP1ADM) and also tables which owned by RP1ADM. alos i could find APPSYSPARAM table and the instance also registered.
But now in this restore we could not find the above.
We followed the same procedure and there is no change in the steps also.
Could anyone help me...
Regards
bala

Hello Bala,
1. As I wrote you already, the notes:
886103 System Landscape Copy for SAP SCM
877203     Post steps after the Homogenous liveCache copy using backup/
457425     Homogenous liveCache copy using backup/restore
has all recommended steps to do, when you will run the u201CSystem Landscape Copy for SAP SCMu201D
2. If you run the u201CHomogenous liveCache copy using backup/restoreu201D you should pay attention to the note 457425. After you imported the complete data backup < step 2. > you need to update the system tables.
To update the system tables you need to know the correct database SYSDBA user & password.
After you restored the databackup of the source database, start the database online & run u201Cselect * from usersu201D SQL command to see the SYSDBA user. Then check that you know the DBA user ( DataBase Administrator ) & password of the source database instance => Open the SQL session with this
user & password.
Example:
after db_activate recover <medium_name>
login as control,password
db_online
sql_execute select * from users
sql_connect superdba,<password of source system>
If you didnu2019t get error with the last command, then you could update the system tables with the superdba,<password of source system> using load_systab command.
The system tables will be updated & the correct SYSDBA user & password will be updated in *.UPC file.
3.
user_sysdba:
You make the database system administrator known to Database Manager. It is only necessary to use this DBM command if the database administrator is not known or is incorrectly known to Database Manager.
u201CI have tried like this
after db_activate recover <medium_name>
login as control,password
db_admin
user_sysdba superdba,<password of source system>
db_onlineu201D
You could update the .upc files with the wrong SYSDBA user password u2026
You was lucky, that you knew the correct SYSDBA user and password of the source database.
Example < NLK is my local database >:
A.     I could update the .upc file with wrong password of SYSDBA user:
dbmcli -d NLK -u control,control
dbmcli on NLK>user_sysdba superdba,test
OK
dbmcli on NLK>db_online
OK
dbmcli on NLK>load_systab
ERR
-24909,ERR_DBAUNKNOWN: SYSDBA unknown
dbmcli on NLK>exit
B. I could update the .upc file with wrong SYSDBA user:
dbmcli -d NLK -u control,control
dbmcli on NLK>user_sysdba test,test
OK
dbmcli on NLK> user_get test
OK
u2026
dbmcli on NLK>sql_connect test,test
ERR
-24988,ERR_SQL: SQL error
-4008,Unknown user name/password combination
dbmcli on NLK> dbmcli on NLK>sql_connect superdba,admin
OK
I could connect as test,test; but the test user is NOT SYSDBA user u2026
dbmcli -d NLK -u test,test
dbmcli on NLK>
Itu2019s recommended to user the load_systab command, so the .upc files will be updated with the correct SYSDBA user/password or
you will get error.
4. http://maxdb.sap.com/doc/7_7/86/68627a1bc642e6a6f73d3bc7a55fe1/content.htm
You got error:
ERR
-24622,ERR_AUTOLOADSYSTAB: Automatic loading of the System Tables failed
-24907,ERR_DBAWRONG: Wrong database system administrator
-24988,ERR_SQL: SQL error
-4008,Unknown user name/password combination
The automatically updating the system tables, according to the default value, is switched on.
After you will run the update system tables with the correct SYSDBA user & password the *.UPC file will be updated,
and with the next liveCache restart you will not get this error.
5. See more information in the MAXDB library:
http://maxdb.sap.com/doc/7_7/45/11cbd6459d7201e10000000a155369/content.htm
Thank you and best regards, Natalia Khlopina
Edited by: Natalia Khlopina on May 19, 2010 2:58 PM

Source System RFC Error in BI

Hello SAP Experts,
I have installed BI 7.0. And i have created an RFC connection for BI to R3. It was working fine but now the SAP R/3 source system in RSA1 is giving an error "Result of the destination check:Name or password in incorrect(repeat logon)". And also when i am logging in, moving between screens or T-codes, it is taking a long time and the status in the bottom of the screens shows that it is checking all the destinations that is the RFC connection created. Not able to trace the reason behind this. Please help. BL consultants are waiting to work.
Thanks a lot
Regards
Vani

Hello MLN,
This is not the first time i am configuring SS. I have done it long back. I created a user manually long back and i used that user while configuring the SS. All these months it worked fine and no issues. As far as i know,ALEREMOTE and BWREMOTE are service users which we get by default after installation. And during configuration, i remember, i gave the passwords for both the users. But my question is, all these days it went fine and now it is giving an error. And why is it checking all the destinations when i execute any transaction. Please clarify. BI consultants practiced SPRO, so is there any chance that they might have changed or ececuted something and the result is this error? If so what can that be. Please suggest
Thanks a lot
Regards
Vanitha

Source System - RFC Connection

From RSA1 if I go to a source system in B/W, right click and choose the check option, I get an error message which says BW Unknown in source system. I think this is indicating that the RFC is not set correctly. I have gone to another B/W which also accesses the same Source System and have done a check and the connection is fine.
If I right click the Source System and select Change in both B/W systems everything is identical except the name entered for the Target Host. If I ping both names the IP address is identical though. Would the Target Host name cause an issue? If not can someone advise on the steps to fix the RFC? Thanks

Niten,
Most likely, IDOC settings on the source system side are not correct. Ensure that the source system is open and you have authorizations to maintain ALE settings. After that right click on the source system and select activate. If that does nto work, try restore.
Aneesh

Change Source System RFC

Dear All,
we have 2 server ecc 6.
1. production
2. backup
right now my sap bw connect to ecc production.
we have plan to use backup instead of production
is it enough just simply changing the IP and host name at the current RFC connection.
from IP production to IP backup server ?
without creating new RFC connection ?
is there any procedure that we have to do before or after the changes ?
please advice

Hello Dady,
You have to take care of RFCs, Logical system names and RSA1 stuff in order to use backup ECC server instead of Production.
I suggest you to go through the following document for better understanding. It's strongly recommended to take offline backup before you attempt to modify source system configuration in BW system.
http://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/library/uuid/70a7b233-8be5-2c10-4190-aed723af5373?QuickLink=index&overridelayout=true
Good Luck.
Thanks,
Siva Kumar

With out source system creation we have transported all the flow

Hi all,
With out source system creation in Quality we have transported all the data flow
now is there any option to map the source system to transported flow.
Regards
Kiran Kumar

Hi,
you can reimport the same TR again once the mapping is done in BW from source system.
If you have left the TR's in the import queue of BW for later import then you can reimport it again.
This will go correctly.
In qualtiy to do the mappings you will need development authorization.
Thanks
Ajeet

Webservice Data Source is Not Overwriting after Transport

Hi,
I have a Webservice Data Source which is loading XML based Data to DSO & Then to Infocube.
In development I it is working fine even Loading Delta perfectly. Then moved it production.
Again due to some client request I have made changes in Web Service Data Source & DSO & Infocube.It is also worked fine in Development. Again moved to production.
But after moving to production all objercts of DSO/Infocube changes are fine. Even Transformation/DTP is as it is with Development for upload from DSO To Infocube.
Issue : The New Webservice datasource is not overwriting Old one, same also applies Transforamtion/DTP too.
I need How to Overwrite it Datasource/Transforamation/DTP with new objects of same in Development.
Please suggest.
Regards,
Subhadarshi

Hello Prem,
I think you might be working on BI 7.0 and this datasource you are talking of is a 3.x datasource?
I have observed that when we activate a 3.x datasource in 7.0 system and replicate it in BI, it shows a modified status, but when you create a dataflow above it it becomes active. I think the datasource you have sent to production has no dataflow above it. Send the dataflow above transports for the datasource and it will get activated.
Please let me know if you need any more information.
Regards,
Pankaj

System load fails after configuring splashy

Hey archers!
I was attempting to make my boot screen a little more exciting today but i seem to have gotten myself into a jam. I followed the Splashy wiki (http://wiki.archlinux.org/index.php/Splashy) where it told me to add "splashy" to the hooks array in /etc/mkinitcpio.conf and when I issued the mkinitcpio -p command i got a few errors about files that didnt exist when it was parsing the splashy hook (in hindsight i should have paid more attention!) but the program reported that it had successfully built the boot images so i assumed it wouldnt be a problem.
Anyways so I rebooted and now i get about 70 rc.sysinit error messages about files not existing and my system just sorta hangs after that. I have a spare Ubuntu disk around that i can use to access and edit my Arch files but i cant rebuild the boot image (to my knowledge) without issuing mkinitcpio -p (not possible in a live cd, i tried). Does anybody have any ideas on how I can undo this? Id rather not have to reinstall if possible

Thanks for the reply loafer, I can now add chroot to my growing list of commands i understand . Unfortunately its not working:
ubuntu@ubuntu: /media/disk-1$ sudo chroot /media/disk-1 mkinitcpio -p kernel26
==> Building image "default"
==> Running command /sbin/mkinitcpio -k 2.6.30-ARCH -c /etc/mkinitcpio.conf -g
/boot/kernel26.img
:: Begin build
/sbin/mkinitcpio: line 253: /dev/null: Permission denied
FATAL: Hook 'base' can not be found
==> FAIL
I dont want to be a help vampire or anything but Im really out of my league here... Can anybody help me out or give me a link?

Mixed (Java & ABAP w/different sources) System Copy Failed- NW 7.0 SR3/SP14

Hello SAP Friends! Our NW admin did a dual stack system copy where the ABAP server came from system 1 and the Java server came from system 2. This worked fine for ABAP (duh it was installed first), but the Java system copy was a disaster. the server started but many key services did not.
Why?
Many of the configuration entries were not generated properly. For example, a new, unknown SID was created, and many entries referenced System 1 (the ABAP source, not even the Java source). We were able to find and fix some incorrect config entries, but we still couldn't get all of the services we needed to work.
I think NW is so complicated that such a configuration is probably impossible, but maybe I am wrong.
Does anyone have tips? Or can confirm that this would never work?
The current plan is to install the Java Server from scratch as an add-in, which is less effort than searching through all the config files without any certainty that it will work. Hopefully it will work.
Many thanks in advance.

Hi Matt,
What kind of infos are you looking for? I didn't perform the copy, have just been trying to figure out how to get all of the Java stack's services to start properly. As far as I know, it was done using the standard System Copy wizard. The ABAP server was done as a central instance and then the Java server was copied and installed as a java add-in.
I have asked the admin to post the details to this thread, but it would be helpful if you could mention what types of info and details you are looking for.
Thanks and Best Regards,
John

System recovery fails after upgrade to Win 8.1 on Satellite L75D-A7283

My elderly uncle forgot the password to his Win 8 user account sometime after upgrading to Win 8.1. He was the administrator, we haven't been able to get Microsoft to reset the account, so I thought to roll back the computer to its factory installation of Win 8.
However, when I try to do that, I get as far as the Reset your PC screen and find that the only target OS is Win 8.1, not the original Win 8. Ok, I accept that. But after choosing to restore Win 8.1, it says "Unable to reset your PC. A required drive partition is missing."
I have examined the disk by removing it and attaching it to another computer and find that both the original Win 8 recovery partition and the new Win 8.1 GPT recovery partition are both there. They just don't seem to be accessible.
It seems that the Win 8.1 upgrade has made the original factory recovery partition inaccessible, which is not particularly helpful. We have no recovery disks to work from, so I think my only recourse is to try to get a Win 8 factory recovery disk from Toshiba, but I wondered if anyone else has a suggestion? Thanks.

Satellite L75D-A7283
It's my understanding the upgrade does not modify any other partitions while upgrading Windows itself. Seems likely something else is wrong.
If you did not create recovery media before and cannot do so now, then obtain it from Toshiba. Scroll down to Get Recovery Media here.
All the information in the section Recovering the Internal Storage Drive, which begins on p. 53 of the User's Guide, should still be applicable.
Satellite/Satellite Pro L40/L50/L70/S40/S50/S70 - A Series User’s Guide
-Jerry

Source system RFC fails after transport

Similar Messages

Maybe you are looking for