Source System Setup Error In Oracle product Information Management.
Hi ,
We have done all the set ups and also we are created Sorce System in repository Setup) Development Manager. Navigations:
Application Name: Advanced Product Catalog
Responsibility Name: Development manager
Development manager>set up> content/document manager> repository set up>update>apply.
Development manager>set up> content/document manager> repository set up>Test Connection
while doing the test connection we are getting following error:
"Test Connection Failed: oracle.apps.fnd.framework.OAException: Application: DOM, Message Name: DOM_EX_WS_CONN_F".
Please help me out from this problem.
Regards,
kiran
Kiran,
Are you having this issue on instance or on a run through Jdev? If its on instance, then either your setup is wrong or it might be some issue with the seeded code. So my suggestion will be to first check through the product implementation guide and then recach support because even if your setup is wrong, you should get a meaningful error message and not an unhandled exception.
--Shiv
Similar Messages
-
Error in codepage mapping for source system. Error text:
guyz,
im facing the below issue in prod.
Error in codepage mapping for source system. Error text:
Message no. RSDS_ACCESS013
Collection in source system ended
Error message during processing in BI
Diagnosis
An error occurred in BI while processing the data. The error is documented in an error message.
System Response
A caller 01, 02 or equal to or greater than 20 contains an error meesage.
Further analysis:
The error message(s) was (were) sent by:
Inbound Processing
Procedure
Check the error message (pushbutton below the text).
Select the message in the message dialog box, and look at the long text for further information.
Follow the instructions in the message.
need your guidance,
cheerz,
raps.
Edited by: raps on Mar 1, 2012 9:39 AMHi ,
Kindly go throught the following threads for your issue resolution::
Error in code page mapping for Source System
Erroe in source system
Regards,
Arpit -
Error in codepage mapping for source system. Error
Hi BW Experts,
I am facing following error:
Error message: Error in codepage mapping for source system. Error text:
Details: Inbound Processing ( 1000 Records ) : Errors occurred
Error in codepage mapping for source system. Error text:
Update PSA ( 0 Records posted ) : Missing messages
I repeated the delta working and everything fine.
Does anybody know why this error occurs?Run rsa13 (for bi 7.0) find your source system which one you are using for data transfer and double click on it and find special options there select the optioned i mentioned already.
Please search SDN you can fin threads related to this thread
if not let me know.
Regards. -
Source system connection error
Dear BW Experts,
Now, i am in a critical situation,that the source system giving error in the quality system.So unable to extract data for testing.we have tried a lot getting any solution.
But now planning to connect the sand box system to the bw quality system.
The confusion is that if the sand box is connected to the bw quality system,then can i use all the developed objects(infocubes,ds objects,multi providers etc) which i had created before or design and activate all the objects again for the new source system.
If any body attended this type of issues earlier,please suggest me how to proceed....
Thanks & Regardas
DebasishHi,
u can connect ur bw quality system to ur sand box.
but u have to reimport all requests from Bw development to bw qualty.
Imp. u have to delete Source conversion routine before importing request.
Steps will be same like
1. replicate data source.....
2.....
etc..
/Sachinkumar. -
Oracle Product information in which database resides in Memory
Dear All,
Greetings!
Last day I come to know an Oracle Product in which complete database resider in Primary Memory.
Can anyone have an idea on that. Also if yon can forward me good link about the same, I will really appreciate you.
Regards,
NeerajDuplicate thread, answer posted here:
Oracle Product information in which database resides in Memory -
Creating Item Catalog Category in Product Information Management(PIM)
Hi all,
I am new to oracle apps R12. now i am working on Product Information Management(PIM) module in R12. I want to create a new Item catalog category(ICC) under the root item catalog. It was used to adding my new items in the hierarchy. I could able to create new item in PIM , but could not able to create a new Item catalog category(ICC).
Please help How create a new Item catalog category in PIM.
Thanks
PrabDid you followed complete steps like
1. Development Manager > Setup Workbench
2. Select from list Product
3. Click on Sub-Task "Categories"
4. Click on Task Categories
5. Click on Sub-Task "Create Category"
6. Choose from LOV for Flex Category "Product Categories".
7. Select Continue
8. Fill fields and select "Apply" butto
regards -
Multi language support for Product Information Management
Does Product Information Management support mutiple langauges and to what extent? For example, an Item Description can be entered for several language but can the user-defined attributes be entered for several languages?
Where can I find more documentation of the multi-language support of PIM?
We are on Advanced Product Catalog version 12.0.0.Was able to do it by adding new files to the shared folder and updating the style in the lang folder to point to the new files.
-
Hi..
I cannot create R/3(productive) source system at BW (development)
I checked password, cross-client and client specific are all changeble (t-code SCC4) and namespaces, sofeware are also modifiagle (t-code SE06) at R/3.
At BW, RFC connection is Ok (SM59) and R3 side, RFC also connected w/o problem.
But the error is still not resolved.
What I have to do now..Hi Ravi..
Error massage is...
Massage No. RSAR502
Diagnosis
With Remote Function Call to system error Screen output without connection to user. ccurred.
and runtime error massage is (ST22)
DYNPRO_SEND_IN_BACKGROUND
Rita -
Source system initialization error in ERPI using EBS,
Hi,
I am trying to initialize source system details in ERP Integrator(workspacce) using EBS detials,for loading to Planning.
Add source system is success,then click on Initialize button I got this error:
Error encountered while launching the ODI Process :Agent didn't prepare this command:Error during Session Preparation:No suitable driver
can you please tell me ,why i am getting this error.
Regards,
SVHi There,
I am trying to extract metadata out of EBS and target is Essbase. Everything is setup and connection working fine.
My problem is that the chart of accounts is getting built in Essbase as a flat structure? How do I get the roll ups from EBS into Essbase? Is there a certain seeting that I must choose to be able to build the Parent Child relationships?
Thanks for the help
Regards
Henk -
Conversion of source system names --- error in transport
hi
i want to transport my object from Dev111 to Quality222
but the transport ended up in error 8
it gave the error...
Source system PRODUCTION333 does not exist
I am confused,
shouldnot it should give error related to Quality system ???
how should be the mapping in Source system names?
after research it seems it should be maintained in
RSA1-TOOLS-mapping of SOURCE SYSTEM NAMES.
i have following systems...
BW- DEV111 QUTY222 PDN333
R3 DEV121 QUTY242 PDN363
What should the entries look like in which systemLandscape is -Transport should be send from Deve-Quality---Production
BW....................................
DEV111 QUTY222 PDN333
R3.....................................
DEV121 QUTY242 PDN363
CAN you advise if the entries SHOULD look like below in Quality and Production System???
Quality system should have entries like:
bw DEV111.............. bw Quality 222
r3 DEV121................ bw Quality222
Production system should have entries like:
bw Quality222.............. bw Production333
r3 DEV242................ bw Production333
Q1 ......IS THIS HOW ENTRIES SHOULD BE IN Quality & Production system??? -
Source System Activation Error
Hi,
We Upgraded BW3.1 to BI7.0, we did successfully on Development. but when in QA when I was trying to activate RFC by going to RSA1 and right click and activate it is showing errors like
Source system XXX300 is inactive RSAR 5
BI unknown in source system RSAR 8
BI IDoc type ZSBB025 is not the same as source system IDoc type RSAR 371
The following errors occurred in the source system: RSAR 374
EDI: Partner profile not available E0 332
Entry in inbound table not found E0 414
Entry in outbound table not found E0 400
Entry in outbound table not found E0 400
Am I missing anything ?
Thanks,
ChanderHi
As a part of sanity check did you perform rituals as below -
Below deletes the BW-specific information in the source system that does not have a connection to the BW System.
1. Log on to the source system in question
2. Call Transaction SE37
3. Enter function module name 'RSAP_BIW_DISCONNECT'
4. Select the 'Sngl. test' function.
5. Enter the name of the BIW system for the import parameter 'I_BIW_LOGSYS' that matches the one prior to the new installation
6. Enter the name of the source system for the import parameter 'I_OLTP_LOGSYS'
7. Choose the function 'Execute'
and then
Transaction SE37 - function module RSAP_BIW_CONNECT - Single Test. Parameter:
I_LANGU <language of the destination to BW>
I_SLOGSYS <OLTP Source system (SLOGSYS from RSBASIDOC in BW)>
I_LOGSYS <BW system (RLOGSYS from RSBASIDOC in BW)>
I_STEXT <name of the OLTP system>
I_BASIC_IDOC <BIDOCTYP from RSBASIDOC in BW>
I_SAPRL <SAPREL from RSBASIDOC in BW>
I_RESTORE
I_TSPREFIX <TSPREFIX from RSBASIDOC in BW>
I_PREFIXE <35 times second byte of TSPREFIX from RSBASIDOC in BW
(Example TSPREFIX = 'BA', then
I_PREFIXE = 'AAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAA')>
Hope it Helps
Chetan
@CP.. -
RRI using Tcode in source system giving error
Hi,
I am trying to run a report in BW in tcode RSRT using RRI mechanism and the same is throwing an exception - An error occurred with the report to report interface during the jump. The same when run in BExAnalyzer throws an error "A critical error occured".
The selections I have applied are as under:
Target system -> Source System(ECC)
Report Type -> Transaction
Report Destination -> ME2L
Assignments as under:
0DOC_NUM -> EBELN
Any trace to the cause of the error would be helpful.
Thanks,
AmoghTry creating a program in source whihc calls t-code ME2L and then from RRI try to call the program., and also check if you have authorization to t-code RSRR_WEB &RSBBS_WEB in you source system,
If this did not help give us more detial on the error you are faceing.
Shashi -
2LIS_02_HDR : Source System ID error
Trying to upload from this datasource in 3.5 environment. I keep getting error while extracting, erroneous data in PSA.
Source System ID not found, how do I fix this?
Thanks in advance
FranFran
Go To RSA1>Tools>choose assignment of source system to source system ID-->assign ID. assign your source system ID to source system and save it
You could find source system ID in your source system tab
Hope this helps
Thnaks
Sat -
R/3 source system creation error(Idoc is missing)
Hi expert's.
i have created an r/3 source system in BI 7. but it's showing error when i am activating it.
error as follows.
1. Basic type ZSMA087 does not exist EA 447
2. Incorrect IDoc type ZSDF085 in the ALE definition of the source system RSAR 373
for the above error 1 i checked in the RSBASIDOC table. it showing the idoc type. when i am checked with the source system that is r/3 system in the partner profile for logical system. it's showing the incorrect idoc type in RSSEND outbound parameters for that logical system
when i am changed that idoc type it's showing error as follows.
"entry RSSEND zsma087 does not exit in edimsg.
after that i checked with this table edimsg. for the rssend outbound option it's won't have the idoc type zsma087. table edit is also not possible on that.
so please help me to solve the issue.
regards
Harikrishna NHi Hari,
Are you using ECC6.0 system or Bw(bi7.0) & R/3 source system
Regards,
Vijay. -
Hello SAP Experts,
I have installed BI 7.0. And i have created an RFC connection for BI to R3. It was working fine but now the SAP R/3 source system in RSA1 is giving an error "Result of the destination check:Name or password in incorrect(repeat logon)". And also when i am logging in, moving between screens or T-codes, it is taking a long time and the status in the bottom of the screens shows that it is checking all the destinations that is the RFC connection created. Not able to trace the reason behind this. Please help. BL consultants are waiting to work.
Thanks a lot
Regards
VaniHello MLN,
This is not the first time i am configuring SS. I have done it long back. I created a user manually long back and i used that user while configuring the SS. All these months it worked fine and no issues. As far as i know,ALEREMOTE and BWREMOTE are service users which we get by default after installation. And during configuration, i remember, i gave the passwords for both the users. But my question is, all these days it went fine and now it is giving an error. And why is it checking all the destinations when i execute any transaction. Please clarify. BI consultants practiced SPRO, so is there any chance that they might have changed or ececuted something and the result is this error? If so what can that be. Please suggest
Thanks a lot
Regards
Vanitha
Maybe you are looking for
-
Dual Booting Windows and Arch (SOLVED!)
Hello all, I'm having trouble getting a windows partition activated again. (Windows was on here for many years, then I installed arch on a separate partition.) Here is the layout of fdisk -l: Disk /dev/sda: 100.0 GB, 100030242816 bytes 255 heads, 63
-
ABS snow-can't join/find or change password
Hi & thanks in advance. I searched the discussions-found somewhat related material but not enough. I am trying to use an airport snow that hasn't been in use for about 2-3 years. I am currently connected via it, so it does still work. I connected it
-
When i left click on a picture to enlarge on many websites - I just get a blank screen. when I centre click on that same picture it gives me an (untitled) - in the tab and the following (as an example) in the top bar javascript:openScreenWin('smallsc
-
Can i change out my intel 4 chip set for a better video card on my HP G71 448cl laptop
I want to play a new video game and this card wont support it. What are my options.
-
I went through the process of installing the development tools package from the Install CD last night, but don't really see anything different in my programs list. Should something extra have been installed there, or did this just install the gcc, gd