Source system was deleted and created again

Hello
The source system was deleted and all transfer rules to this source syttem dissapaared.
Later it was decided that we need the siurce system and it was created from new under the same name.
Is it possible to restore lost transfer rules?

I don't know of a way of restoring them intact, but if you had ABAP code in the transfer rules, you can search table <b>RSAABAP</b> which might contain your ABAP code.  SAP doesn't seem to delete from the table even when you delete a DataSource assignment.
There are a lot of rows in the table. the challenge will become finding which ones are yours.  Hopefully your code was commented.

Similar Messages

  • Document Deleted and Created again with diff doc. number

    Dear All,
    We are having the scenario that we have some parked documents during the fiscal year (2009) and before the yearend closing, we intend to change the new posting date (01.01.2010) for those parked documents which were created through Logistics Invoice Verification.
    When we give new posting date (01.01.2010) and make save as parked/completed, the system issues a message,"Document 5105601528 2009 was deleted and created again under 5105601532 2010".
    We need to keep the same document number 5105601528 for the next fiscal year also and do not want to generate new document for 2010.
    I request you to all please provide your valuable suggestion that how we stop the new document number for the same document during next fiscal year.
    Regards,
    Ranesh.

    Hi
    As you mentioned that you have changed the Posting Date in the Parked Document from old fiscal year to new fiscal year date 01.01.2010 , then the system will generate the Number based on the sequence available.
    It is not possible to retain the same Document Number in the next fiscal year 2010.
    Hence if you want the system to generate to the same old number, then in the new fiscal year, you shouldnt have any parked/posted document with that number.
    As per my guess, in the new fiscal year already a Document was parked/posted with the numbers 5105601528, 5105601529,5105601530 and 5105601531.And the next number in sequence is 5105601532, iey when changed the posting date of the parked document system generated ihe next available number.
    Hope you understand.
    Regards
    Venkat

  • My iPhoto dose not work from 0:00 Sunday. I was deleting and downloaded again but dosn't work! Why?

    My iPhoto '11 dose not work from 0:00 Sunday. I was deleting and downloaded againg but the problem is same.

    Sorry but we need more to go on thatn it does not work
    what happens? what does not happen? what error messages to you get? if it crashes post the first 50 lines of the carash report
    LN

  • I was trying to install windows in my mac pro, but, i dont know how, my mac system was deleted and now i just have the windws system and its wireless isnt working what do i do?!

    What do u think that i need to do stay with windows, if its your answer, tell me how to make the wireless work
    If your anwers is install mac again tell me how can i install it again i dont have the installation disk
    Help Me Plz

    Go to the Windows Control Panel and select Boot Camp applet. In that applet there is a Boot Drive option. Select Mac OS X.
    Or restart the system and hold down the Option key for a few second. A Boot Menu screen will come up. Select Macintosh HD.
    Once in OS X go to the Sys Prefences, Startup Disk and select Macintosh HD Mt Lion 10.8.2 and click Restart then Restart again. the system will now restart in Mac OS X.
    To boot back to Windows do the same, Startup Disk, and select Windows then Restart and Restart again.

  • Why is the old app version is showing even when the app was deleted and downloaded again?

    There is an app that I downloaded, which we updated (as we made this app) but when we did, the updates are not showing on the app. I deleted the app and downloaded it again but still the updated version is not showing. I tried downloading the app from another phone and the updated version is showing.
    I have tried to research on this and found this link which I found to be most helpful but even after following the steps the old app is still showing on my iphone 4s:
    http://howto.cnet.com/8301-11310_39-57379574-285/how-to-delete-unwanted-ios-apps -from-itunes/
    Would appreciate all the help I can get

    Sometimes the battery life may be at, say 80% while it is at 100% charge;
    so the numbers may indicate a replacement battery is needed. An Apple
    Store with genius bar, or an authorized Apple service provider could be
    helpful in determining the battery and charging system health and also
    provide a replacement battery. Figure a computer more than a few years
    old may be due for a new battery...
    If you call ahead to discuss an appointment with a genius or specialist,
    be sure to note your product serial number and ask about replacement
    battery availability, since that option should be present should it need to
    be replaced. Not sure if they'd want to check the magsafe adapter, too.
    Hopefully an SMC reset may help, if not see an authorized Apple specialist.
    Good luck & happy computing!

  • Permission problem when create source system between BI and R/3

    Hi All,
    I want to create a source system between BI7 and R/3 system
    Both RFC connections have been created and tested succefully on the 2 systems
    But when i create the source system on BI I have the message :
    "Changes to Repository or cross-client customizing are not permitted"
    Any idea ?
    Thanks in advance for answers
    Sebastien

    Hi All,
    Thanks for your answer
    The issue was solved when system is opened
    Now my source system is created but I can't activate it !
    When I try to activate I have 2 error messages in result :
    RSAR 374 : The folowing errors occured in the source system
    RSAR 375 : Result of the destination check: Timeout
    There is no SAP help on these messages and for the moment I don't find thread about this on forum
    Any idea ?

  • How to delete and create the CCM MASTER CATALOG in Catalog Content?

    Hi All,
    Please provide the solution as we are in real trouble.
    We have to delete master catalog and upload it again. Deletion is done because the mapping and all are being corrupted. SAP has suggested to delete the catalog and again upload it and do all the mapping again related to supplier and procurement catalog
    http://help.sap.com/saphelp_srm50/helpdata/en/7f/9b62405c910272e10000000a155106/frameset.htm.
    In the link above I found information really useful, however according to the document the CCM MASTER CATALOG should be created automatically by the SAP Catalog Authoring Tool, this happens the first time that you are using the system.
    Catalog Creation
    You use this function to create catalogs in SAP Catalog Authoring Tool.
    You can create the following types of catalogs:
    Supplier catalogs
    Procurement catalogs
    Model service catalogs
    Note
    SAP Catalog Authoring Tool creates the master catalog, the SRM product catalog, SRM contract catalogs, and the contract catalog for service specifications automatically.
    When SAP Catalog Authoring Tool is used for the first time, you must open the Edit Catalogs application once, before you create any catalogs. Choosing Edit Catalogs triggers the creation of the master catalog. If you do not do this, SAP Catalog Authoring Tool outputs an error message when you try to create a catalog.
    We have already the Master Schema and we know how to map the CCM MASTER CATALOG to the supplier and procurement catalogs. The main problem is that we need to delete the CCM/MASTERCATALOG and created again.
    1. How delete the CCM/MASTERCATALOG?
    In a Test environment I have delete the CCM/MASTERCATALOG using the "Edit Catalogs" mode then choosing the catalog and confirm the deletion.
    Once this has been done, all the catalogs has been erased including the CCM/MASTERCATALOG, so now we have the system in blank. I am not sure if this is the correct way to delete the catalog or there is an easiest way where the Procurement and supplier catalogs don't disappear once the CCM/MASTERCATALOG is deleted.
    2. Once the CCM/MASTERCATAOG is deleted how to created again?
    According to the instructions the SAP Catalog Authoring Tool should created this automatically when is used for the first time, however how we can created the CCM/MASTERCATALOG again if the SAP Catalog Authoring Tool is not used for the fist time.
    Is there a way where the system can create the CCM/MASTERCATALOG for a second time?
    I follow the steps to create the CCM/MASTERCATALOG for the first time however I didn't get a positive result.
    Any help provided will be really appreciated.

    Hi,
    Generation of the /CCM/MASTER_CATALOG is automatic and does not require any additional effort from a catalog admin other than accessing the CDC (Edit Catalogs).
    If the catalog is not regenerated at this point it is likely that you then receive an error like 'Error reading catalogs, error reading Master Catalog' or something similar which would indicate that the previous deletion of the master from either table /CCM/D_CTLG or /CCM/D_CTLG_REQ was not successfully completed or that the update operation in table /CCM/D_UPD_STATE remained in update status and never for some reason completed (status 03).
    Deletion of the Master catalog should not cause the deletion of any other catalog, unless you have chosen 'delete all catalogs'! Choosing the Master and delete should result in only a deletion request for the master catalog, be aware however that all mapping records between Supplier -> Master -> Procurement catalogs will be destroyed and cannot be 'rejoined' but only rebuilt from scratch. It is also advisable after the Master deletion to chcek with report /CCM/CLEANUP_MAPPING which orphaned items and mapping records require cleanup as it is better to remove these before proceeding with the new mappings.
    Regards,
    Jason

  • Farm Account gets Access Denied error when accessing SharePoint Subsites after Account was deleted and recreated in Active Directory .

    A SharePoint Domain Account(farm admin account) was deleted and recreated with the same absolute credentials in AD due to this i cannot navigate to certain sites, not even able to edit web parts and cant view site actions menu.
    The account has full permissions across the site and is a site admin.
    I have tried to import the old login to the new login 
    stsadm -o migrateuser-oldlogin <domain\name>-newlogin <domain\name> [-ignoresidhistory]
    But this did not help as it didnt resolve  the SID's issues.
    I couldn't restore the deleted object(AD acc) too.
    Is there a way that i can use to get this account to work again?
    There option of creating a new domain accout and give it full permissions is not recommened by the client.
    So i must find a to get this account to work again.
    Thank you in Advance.
    Calvin

    Hi,
    I would have a look in Active Directory first. Because a new account can't have same IDs that an old one, your new account can't be used instead of the old one, even if login, password and group memberships seems to be set all the same.
    If your forest functionnal level is 2008R2 or more, and if Active Directory Recycle bin has been enabled, you can probably restore the deleted account.
    you can find the way to restore a deleted account here :
    https://technet.microsoft.com/en-us/library/dd379509%28v=ws.10%29.aspx?f=255&MSPPError=-2147217396
    If your forest is set to a previous functionnal level or the recycle bin is not enabled, you could give a chance to authoritative restore, as described here :
    https://technet.microsoft.com/fr-fr/library/cc816878(v=ws.10).aspx
    hope it helps
    Sébastien

  • ¿Will make a delete and create a new temp.dbf increase perfomance?

    I have a 32GB temp file. I don't understand so much what really mean that temp.dbf must be so big.
    The question is: Can I delete and create a new temp.dbf? and what means do this?.
    I'm newbie in this.
    Thanks a lot, Luis.
    Edited by: cabezanet on 23-nov-2009 9:10

    Temporary tablespace (physically tempfile) is sused for sorting operations, like result set ordering, joins and etc. Hopefully, your tempfile was in autoextend mode and its' size increased as soon as there was request for sorting operations which did not fill into memory.
    You can drop and recreate the temp tablespace as it is not related any database consistency structure. They are only sort segments.

  • HT1725 When I'm downloading iOS for my iPhone just for a minute my internet connection was gone and the whole download was deleted and when I resumed it started from the beginning?

    When I'm downloading iOS for my iPhone just for a minute my internet connection was gone and the whole download was deleted and when I resumed it started from the beginning?

    Delete and re-download the Dropbox app. You will have to sign in again and adjust app settings.

  • I Want Get Removed My Apple ID Account From Apple And Create Again.

    I Want TO Delete MY Apple Id Account From Apple And Create Again,

    You can't delete an account, all you can do is remove personal info from it and stop using it - any content that you downloaded with the account will remain tied to the account. If you want to use its email address on another account then you will need to replace it on that account first e.g. by tapping on it and logging into it via Settings > iTunes & App Store on your iPad, the Store > View Account menu option on your computer's iTunes, or via http://appleid.apple.com

  • My email was deleted and I have long since forgotten the password - plus I must have typed personal information in incorrectly... I can't reset my password (email goes to deceased email account) and I have $$$$ left! What do I do?

    My email was deleted and I have long since forgotten the password - plus I must have typed personal information in incorrectly... I can't reset my password (email goes to deceased email account) and I have $$$$ left! What do I do to get access to the remaining dollars?

    You do realize that there are many, many email providers and without knowing which one you are talking about, there is no way to answer your question?
    Which then leads to this ..... Have you contacted your email provider about this? That's probably the best place to start. See what they recommend.

  • ABAP Routine for Deleting and creating index for ODS in Process chains

    Any pointers for the ABAP Routine code for deleting and creating index for ODS in Process chains.

    Hi Sachin,
    find the following ABAP code to delete ODS ondex.
    data : v_ods type RSDODSOBJECT.
    move 'ODSname' to v_ods .
    CALL FUNCTION 'RSSM_PROCESS_ODS_DROP_INDEXES'
      EXPORTING
        I_ODS = v_ods.
    To create index:
    data : v_ods type RSDODSOBJECT.
    move 'ODSname' to v_ods .
    CALL FUNCTION 'RSSM_PROCESS_ODS_CREA_INDEXES'
      EXPORTING
        I_ODS = v_ods.
    hope it helps....
    regards,
    Raju

  • How to Check source systems in RSA1 and verify that connections are working

    How to Check source systems in RSA1 and verify that connections are working ok and how to Check Planning Area have green status.................

    Hi,
    In rsa1, go to 'Tools' and option 'Manage Source System' - the screens are self explanatory there after. To check the planning areas, go to transaction /SAPAPO/MSDP_ADMIN anc check the status of the relevant planning areas.
    Regards
    Vinod

  • How retrieve my songs in my ipod touch 5th gen that itunes have deleted. Half of my songs was deleted and i dont know what to do.

    How retrieve my songs in my ipod touch 5th gen that itunes have deleted. Half of my songs was deleted and i dont know what to do.

    You can redownload most iTunes purchases by:
      Downloading past purchases from the App Store, iBookstore, and iTunes Store
    For other music you will have to get them from where you originally got them

Maybe you are looking for

  • Satellite L30-PSL33 does not turn on from hibernation

    Hello, as i mentioned in my previous post i also have a problem with hibernation.The thing is that when i leave it to hibernate and turn it on later sometimes it doesn't load Windows-the loading bar reaches its end and then it stops "thinking" so i h

  • Data is not updating in DB Table

    Hi...All we have done the RFC-JDBC Synchronous scenario, we are getting the success messages into SXMB_MONI ,in the CCM also it was showing success. but data is not updating in to the Database Table. client want to see the response data in the Databa

  • Lumia 800 stalled

    my lumia 800 was working fine and then went low on battery and will not now start. it sticks with the nokia screen or low battery picture. i have taken the battery out and reassembled and it remains the same. i have plugged into my imac and also to c

  • Cannot export in iPhoto 6.0.6

    Having some trouble exporting photos in iPhoto on my MBP. I have tried selecting single pics , mutiple pics in a single roll and pics from multiple rolls. Destination is either the desktop, a folder on the desktop or a kingston 1gb usb drive. I have

  • Safari cranky, loads google, but...

    am at home, on my home network (on my mac); airport works fine. on my new ipod touch (with the january update), a lot of web pages will not finish loading; they start, then...nothing. google loads, searches. my yahoo page loads. but most others, no.