Source Systems tree in RSA1

Hi!
The top level of Source Systems tree consists of folders BI, SAP etc. Is the folder BI empty after system installation?
Thanks,
Olga

You should have self client, because you will send data from ODS to other targets also, here BW system itself will act like source system.
To create it:
Goto SM59-- ABAP Connections-- Create..
Here you have to creat the self client for the BW system. Take Basis help to creat it.
Hope this helps.
Veerendra.

Similar Messages

Source systems vanishes from RSA1 after renaming of the LSN after BDLS

Dear BW/BI Experts,
           We are doing BW3.1 upgarde to BI7.0........After system copy there is need of rename of logical system for BP1 to BD1 (Prod. to Dev. and Dev. is our new Target BW system ) and From RP1 to RQ1. Before renaming I checked that all source systems were there in RSA1 i.e. Myself BW system , RP1 source system and Flat file source system as per SAP HOW TO ....System Copy in SAP Business Intelligence Systems Landscapes document. (almost 16 steps)
        But after running renaming program by BDLS , I saw source systems are vanished from RSA1..........and now I am trying to create source systems manually.........system is not allowing the same...........pl suggest...........waiting for your experts opinion......pl help urgently as I am in problem fromn last many days and did system copy more than 2 times considering that there may be system copy problem.......
While RQ1CLNT100 creation i.e.Source system ....I am getting follwoing error.........
Entry in outbound table already exists
Message no. E0404
Diagnosis
A partner profile (outbound paramters) could be found using the following key:
/RQ1CLNT100/LS//RSRQST////
This relates to the key fields in table EDP13:
RCVPRN Partner number
RCVPRT Partner type
RCVPFC Partner function
MESTYP Logical message
MESTYP Message code
MESCOD Message function
TEST    Test indicator
Procedure
Please check the EDI partner profiles.
and also following error after activation..........
Entry in inbound table not found     E0
Entry in inbound table not found     E0
The BW IDoc type ZSBA014 is not the same as the source system IDoc type ZSBC044     RSAR
The following errors occurred in the source system:     RSAR
Incorrect IDoc type ZSBA005 in the ALE definition of the source system     RSAR
Best Regards,
Sharad

Hi Sharad,
This is a very Basis-oriented task,
can your BD1 system can communicate with your peer ECC/R3 deveopment? you might need to run sm59 to ensure your RFC connection with ECC/R3 deveopment is communicating without problem.
once the RFC is ok, if you are familiar with WE20 and WE21 transactions, these transaction will configure IDoc setting (basis level) where you BI system will talk to, i believe IDoc are using old information copied from BP1 is still pointing to your ECC/R3 productive system at IDoc level. you will need to have Basis guy to help you out. please let me know if you need help on WE20 and 21, if you do, you need to provide me your current settings in BD1 and the peer ECC/R3 development setting as well.
cheers

Source system connection in RSA1

Hi,
I am not able to create a source connection under the SAP source system in RSA1.
Though I create a source connection under SAP source system, it gets automatically created in BI system.
I would like to create it under SAP source ssytem.
Please guide.
Thanks,
Rajiv

hii rajiv,
Check the foll links:
<link farm removed by moderator>
hope it helps,
regards,
raghu.
Edited by: Raghu on Nov 12, 2008 11:38 AM
Edited by: Siegfried Szameitat on Nov 12, 2008 11:46 AM

Two source system in RSA1

Hello All,
I have the following scenario.
I have two source system ECDCLNT200 and ECDCLNT230 and one BI system BIDCLNT200. client 200 is used for configuration and client 230 is used for data loading and validation.now firstly i created source system ECDCLNT230 in RSA1 then it comes under SAP menu but when i try to create ECDCLNT200 in SAP Menu it comes automatically under BI menu. i deleted it and tried again but the same problem is there.
if i remain the same configuration means ECDCLNT200 under BI menu then will it create any problem in future ? or if i want to create ECDCLNT200 under SAP menu what is the otheroption ?
I tried both the way. first i rightclick on main node and selected create source system and second time i right click on SAP and select create source system but couldn't create it.
Please let me know the solution.
Regards,
Komik Shah

Thanks vincent,
i got the solution through SAP note.
I have assigned the points.
Thank you again
Regards,
Komik Shah

Source system moved to differnt folder in RSA1

Hi,
We did system refresh from R/3 production to R/3 Quality system.
After this, as a part of post refresh activities, we did restore source system connection in RSA1 of BI Quality system by
right click on R/3 Quality system and choosing the option Restore.
It asked us user id and passwords for aleremote and extremote users ( background users for BW and R/3 quality ).We provided those.
Then it asked us to provide the userid and password for administrator for R/3 quality system.
We provided user id and password of DDIC user in R/3 Quality system.
Then it gave the following message:
User already exists in source syst. Only continue if profile and password are correct.
Continue? or Cancel?
We selected "Continue".
Then it gave us the screen with following message:
RFC destination already exists in source system .Do you want to use this destination, check, or cancel source system connection?
Use ? Check? Cancel?
We selected "Use"
Then it gave us the following message :
Connection BB is used in the R3QCLNT100 source system as a connection BQ1CLNT100 to BW.
Do you want to delete this connection in the source system? Connection Is Restored After It Has Been Deleted Successfully.
Delete ? or Do not Delete?
We selected Delete.
After this, restore took place successfully but there is one problem.
After restore, in RSA1, Source system R3QCLNT100 ( source system name for our R/3 quality system ) is shifted from the folder SAP ( source system type for SAP source system ) to Folder BI ( source system type for BI system )
Please suggest how to shift the source system from BI to SAP Folder.
Thanks,
Tarun Brijwani.

Hi Tarun,
have you checked RFC connection before you did Restore?
Might be that you need to adjust RFC settings (TA SM59) for that particular source system.
Seems to me that IP of your R/3 QAS system is pointing into some BW system. That's why your source system was shifted under BI source systems in TA RSA1.
BR
m./

Can't found source system after successfully created in RSA1

Dear expert,
I'm afraid that my orignal post will drown..
I put here for the new quesiton of my new upcoming issue
Background:
We are doing the ECC system refresh (ECC PRD to QAS)
ECC QAS has connection with BW QAS
The next step is to restore the Q23(ECC) source system in QBW RSA1
it is somehow missing, so i try to create it
I created it by clicking on the icon of "SAP" then it will pop up a "create" tab It takes me quite a long time around half an hour. Finally it shown in the end of RSA1 screen , Q23CLNT0** source system is created successfully.
BUT the strange thing is i refresh the RSA1 screen , i can't not find the Q23 apears in the folder of SAP!!!
And i try to recreate , it shows in the end " Q23CLNT0** "already exist (see attached), how could it be , can anyone come to help? thank you! Best regards,kate

Hi,
Check in BW tab , it may be mistaken created there .
if it is so, delete it and recreate in SAP tab.
Regards
Yugandhar T R

Error when activate a SAP source system

Hello Experts,
I have an issue when I try to create a new SAP source system but I cannot complete this operation because a Timeout error occurs when the system made the destiny verification, the source system can be created but not activated, I already create the RFC connection and they are OK, I add the new logical system of the source system in the configuration (SBIW) in the general settings,and the data source tree is show succesfully and sems to work OK and the data sources seems to be OK too.
In the RSA1 transaction, go to source systems tree, choose the SAP source system called: "conexion a dev 200" -> right click and choose activate and the error occurs.
I have a Myself source system already created and activated, I cannot find the source of the problems thata cause the timeout error in the new source system.
Thank you vey much in advance,
Niurka

Yes, I try ti use the create automatically option first but it doesn't work, because says that we system already exists because here exist a myself source system with an RFC to R/# ( I don't know why), so I must use the manually creation option, I put the logical system, and all the requeriments of the screem. The system create the source system but when I try ti activate it, it is impossible to do it....!
I hope that you can give some tips or solution for this issue,
Thanks!

An error occurred in the source system

Hi Gurus,
when i am trying to load the data into the master data object 0PMNT_BLOCK_TEXT ,I am getting the error "an error occured in the source system"with caller 09. and the error message contains "no transfer structure available for info source 0PMNT_BLOCK_TEXT in the source system and "errors in source system".
I have loaded the data in development and quality environments succesfully.this problem is causing in production environment.all other loads are working fine.
Please give me your valuble inputs.
regards
Sridhar V

Hi,
there may be no connection with source system to BW system.
please check the same in RSA1 Source system tree for the source system, context menu, check the connection.
if not activate the transfer stru. of this object in BW system by replicating the datasource.
Regards,
Vishwa.

Source system R33CLNT100 is marked as inactive in BI.

Dear Experts
When I do a source system check via RSA1 > Source systems > SAP folder > right-click the R/3 system ID and select Check function,
the system throws as error as shown :
"Source system R33CLNT100 is marked as inactive in BI."
"Procedure
    If you have upgraded to BW 2.0, activate the source system.
    With other errors connected to this source system, choose Restore   the
    source system from the source system tree in the Data Warehousing
    Workbench. This regenerates the source system, merges the relevant
    communication parameters, and replicates the DataSources in BI.
and
"BI IDoc type ZZZZ011 is not the same as source system IDoc type ZSSS021     RSAR     371
There was a system Refresh from Production R/3 46C to QA system R/3 46C.
We did the BDLS but the IDOC seems to have got overwritten by R/3 Production's, obviously , due to refresh.
Any idea how to resolve this?
It seems like I need to re-create manually the idoc but I am not expert in this area.
I do know there are standard IDOC aspects for BI 7.
But how to re-create the relevant IDOC settings or configurations ? Need to do this in both BI and R/3 ?
Best regards
Pascal

Hi pascal ,
Seems to be connectivity between the source system and the Bi system it will be restore by basis team only. Couple of tings that you can do at your end will make their work at ease
i) check the RFC connection between the Source system and the Bi system in Sm59.
ii)Make sure the user ALERMOTE and SAPCPIC are unlock in ecc side
Now for configuring the source system by urself follow the below points :
1. In BW, call TA RSA1.
2. In the left hand column, choose "Source systems".
3. In the column Source systems, right click on the respective source system and choose "Restore".
4. A popup "Create R/3 source system" appears. Enter the passwords for user SAPCPIC. Hit enter.
5. A popup "Please log on as an administrator in the following screen." appears. Hit enter.
6. A logon screen of the child system appears. Enter your user and password and hit enter.
7. A popup "New source system connection" appears. Hit "Continue".
8. A popup "Check RFC destination" appears. Hit "Check".
9. The child system jumps into TA59, displaying the RFC destination pointing to the BW system. Check it by pressing "Remote logon" (nothing happens, i.e. no error message appears!) and "Test connection" (the connection test table will be displayed). Hit F3 twice. The system jumps back.
10. The popup "Check RFC destination" appears again. Now hit "Use".
11. A popup "Connection can not be used" appears. Hit "Delete".
12. A popup "Please log on as an administrator in the following screen." appears. Hit enter.
13. A logon screen of the child system appears. Enter your user and password and hit enter.
14. A popup "New source system connection" appears. Hit "Continue".
15. A popup "Check RFC destination" appears. Hit "Check".
16. The child system jumps into TA59, displaying the RFC destination pointing to the BW system. Check it by pressing "Remote logon" (nothing happens, i.e. no error message appears!) and "Test connection" (the connection test table will be displayed). Hit F3 twice. The system jumps back.
17. The popup "Check RFC destination" appears again. Now hit "Use".
18. A popup "Replicate Metadata?" appears. Hit "Only Activate".
19. If popup "Do you want to reactivate all transfer structures and DataSources?" appears. Hit "No". If "Display activation log" popup appears - press "No" (that message may appear several times).
20. Press "Back" if "Analyze application logs" screen appears
Source -->http://forums.sdn.sap.com/thread.jspa?threadID=1892011
Thanks,
Deepak

BI is flagged as inactive in BI source system

Dear All,
BI Consultants are facing error on RSA1 tranaction in the Source system .
RSA1 -source system - select Sources system -right click - click check . they are getting the below error .
BI is flagged as inactive in BI source system
Diagnosis
     BI is flagged as inactive in BI source system .
Procedure
     If you have upgraded to BW 2.0, activate the source system.
     With other errors connected to this source system, choose Rest
     source system from the source system tree in the Data Warehous
     Workbench. This regenerates the source system, merges the rele
     communication parameters, and replicates the DataSources in BI
Kindly advise to resolve the issue.

Hi,
Have you ever checked the thread, below? It's been solved, previously
BW Issue
Best regards,
Orkun Gedik

Delete source system fails

I've got a flat file source system definition which I deleted via rsa1 --> source system --> right-click --> delete. it deleted all the dependant objects (transfer rules, psa, EDI config, etc), but the system still shows up in RSA1. There's an entry in table RSBASIDOC referencing this source system (field SLOGSYS), because we manually tried creating a basic idoc type for it (which we now can't delete with tcode WE20 since it's been generated).
Does anyone know off hand how to get rid of the source system in the RSA1 list?
Thanks!
Rich

Hi Rich -
I guess the SAP Note (967999) applies in your case. I've pasted it below for your reference.
Symptom
In the source system tree of the Administrator Workbench (AWB), you use the 'Delete' function in the context menu (right mouse button) for a connected source system.
Even though the system displays success message RSAR 262:
Source system & deleted
at the end in the status line, the source system connection is visible again after the AWB has been updated and the source system connection has not been deleted.
Other terms
Context menu, source system tree, right mouse button, delete source system, RSAR, 262, 620, SLG1, RSAR262, RSAR620, AdminWorkbench
Reason and Prerequisites
This problem is caused by a program error.
An error occurs during the deletion, however the system does not inform you correctly of this at the end, after the deletion process has terminated.
Solution
BW 3.0B
Import Support Package 33 for 3.0B (BW 3.0B Patch 33 or SAPKW30B33) into your BW system. The Support Package is available onceNote 914950 "SAPBWNews BW 3.0B Support Package 33", which describes this Support Package in more detail, has been released for customers.
BW 3.10 Content
Import Support Package 27 for 3.10 (BW 3.10 Patch 27 or SAPKW31027) into your BW system. The Support Package is available onceNote 935963 "SAPBWNews BW 3.1 Content Support Package 27", which describes this Support Package in more detail, has been released for customers.
BW 3.50
Import Support Package 19 for 3.5 (BW3.50 Patch 19 or SAPKW35019) into your BW system. The Support Package is available once Note 928662 "SAPBWNews BW Support Package19 NetWeaver'04 Stack 19", which describes this Support Package in more detail, has been released for customers.
BW 7.0
Import Support Package 10 for 7.0 (BW7.0 Patch10 or SAPKW70010) into your BW system. The Support Package is available once Note 914304 "SAPBWNews BW 7.0 Support Package 10", which describes this Support Package in more detail, has been released for customers.
To provide information in advance, the note(s) mentioned above may already be available before the Support Package(s) is/are released. In this case, the short text of the note still contains the words "Preliminary version".
Pls assign points if helpful.

Creation of Source System(R/3)

Hi,
I'm trying to create R/3 source system in BW(RSA1->Source system->Create) but it fails to create.
I have created RFC Destination on both BW & R/3 systems.
I tested them for 1) Test connection 2)Remote connection.
Sucessfully able to remotely login to each other systems.
But when i create from RSA1 its failing.
Any help please ?????????
Regards
prabhakar

Prabhakar,
while creating the Source System, if you right click on source system and go with check...it will give you the error. if you click on Question Mark or Help Ocon. it will what you need to do in order to get rid of this problem.
you need to create a entry in the RSADMIN table. check for RSA1> tools> there is an option that will update the table RSADMIN.
In furture, if you come accross any such problems with Source system... go with check.
all the best.
Regards,
Nagesh Ganisetti.

SAP Source system creation in BI

Hi Gurus,
I am trying to create SAP source system in BI, The trying to create ALE REMOTE user in both systems.
What roles and profiles i need to assign to this user id. After creating user ids what steps i need to follow. Thanks.
Best Regards,
Suresh.

Hi,
To Create SAP Source System In BI:
-Click on Source System tab in RSA1.
-Then right click on the heading Source system and select Create.
-Select the first option Automatic. Create SAP System and continue filling the other details.
-This will create Source system automatically.
When you enter background user's password, sap system user name is modifiable, but the the BI user.
The background user of BI system, is defined in
RSA1 => Settings => Global Settings
BW User ALE field will have the name of the background user in BI.
If you are using ALEREMOTE as background user, make sure the same is maintained as BW User ALE.
regards,
Pruthvi R
Message was edited by:
Pruthvi R

Steps to Create R/3 Source system in BW

I need to create a source system for extracting data from R/3
Please let me know the steps for the same. Any document for the same would be appreciable
The BW Client is 100
Logical client is 100

Hi
Navigate to Source System tree
Here you need to create new destination by entering Target Computer, System Id, System Number, Back ground user & password.
In the RFC Destination screen, enter Target Host, System Number, Port Number,
If you want to make "Trusted" system,check thet check that check box.
This is the way to create to source system in BI7.0
Don't forget to test the connection.
Regards
Saravanan.ar

RFC not shown in source systems

Hi All;
I create an RFC from BW to ERP 2004
now this rfc is being shown in transaction SM59 but when i run
transaction rsa1 and go to source systems there is no source system for the RFC that i created
Please help
Thanks and regards
Tushar

Tushar, it is not enough to just create an RFC connection in SM59. You also need to create a Source System connection in RSA1 that uses the RFC connection from SM59. Goto RSA1 and click on Source Systems. Right-click on Source Systems and Create. A window will appear prompting for the Source System type, use SAP System from Release 3.0E. It will then prompt you for Available Destination where you put in your RFC connection (it is a drop-down list). Type in your user-id and passwords to connect the two systems together and you are all set.
Your Source System will be set up. You can right-click on your Source System and select Check to verify the connections and the passwords.
Hope this helps.

Source Systems tree in RSA1

Similar Messages

Maybe you are looking for