Source to download Unity Connection 2.x

Dear all,
I want to fresh install the Unity Connection version 2.x at my customer regarding the HDD has been crashed. But I don't have the source to do it. I have been searched on cisco.com and still get nothing. Please kindly help me to share the source of unity connection version 2.x. The version that I need are 2.1.2 , 2.1.3 , 2.1.4.
Thank You.
Regards,
Taufik

Go to cisco.com:
Downloads Home
Products
Unified Communications
Unified Communications Applications
Messaging
Cisco Unity Connection
Cisco Unity Connection Version 2.1
Gareth

Similar Messages

HT201263 I am unable to download the restore file for ipod touch due to slow internet connection. is there any other source to download the file to my windows7 computer?

I am unable to download the restore file for ipod touch due to slow internet connection. is there any other source to download the file to my windows7 computer?

Try this link or this place
After the download, hold down the Shift key when you click Update in iTunes, and you'll be prompted to locate the downloaded firmware file.

Problem with uc-locale-en_GB-8.6.2.1-12.cop selection on unity connection cluster

Hi All,
Hopefully someone can help me out. I'm trying to install uc-locale-en_GB-8.6.2.1-12.cop on our unity connection cluster which is running 8.6.2.20000-2. The cop files successfully installs and I've rebooted the both servers but I cannot select the language anywhere in unity connection administration.
I suspect this is because I'm running 8.6(2a) from the cisco site and not Unity Connection 8.6(2) Engineering Special 12 as per the release notes for Unity Connection 8.6(2a). Are Cisco likely to release language packs for version 8.6(2a)? Otherwise I guess I'm going to have to try and raise a TAC call and get access to the engineering special so I can gain the british langauge back again.
For reference :-
admin:show version active
Active Master Version: 8.6.2.20000-2
Active Version Installed Software Options:
uc-locale-en_GB-8.6.2.1-12.cop
ciscocm.refresh_upgrade_v1.1.cop
cm-locale-en_GB-8.6.2.1000-1.cop
Thanks,
Mike

Hi Mike,
I'm not sure about the versioning, but am curious if you followed these steps;
To Install Connection 8.x Language Files from a Disc
Step 1 Stop the Connection Conversation Manager and Connection Mixer services:
a. Start Cisco Unity Connection Serviceability.
b. From the Tools menu, select Service Management.
c. Under Critical Services, in the Connection Conversation Manager row, select Stop.
d. Wait for the service to stop.
e. Also under Critical Services, in the Connection Mixer row, select Stop.
f. Wait for the service to stop.
Step 2 Insert the Languages disc in the disc drive.
Step 3 Sign in to Cisco Unified Operating System Administration.
Step 4 From the Software Upgrades menu, select Install/Upgrade. The Software Installation/Upgrade window appears.
Step 5 In the Source list, select DVD/CD.
Step 6 In the Directory field, enter the path to the folder that contains the language file on the CD or DVD.
If the language file is in the root folder or if you created an ISO image DVD, enter a slash (/) in the Directory field.
Step 7 To continue the language installation process, select Next.
Step 8 Select the language that you want to install, and select Next.
Step 9 Monitor the progress of the download.
Step 10 If you want to install another language: Select Install Another, and repeat Step 4 through Step 9.
If you are finished installing languages: Restart services:
a. Start Cisco Unity Connection Serviceability.
b. From the Tools menu, select Service Management.
c. Under Critical Services, in the Connection Conversation Manager row, select Start.
d. Wait for the service to start.
e. Also under Critical Services, in the Connection Mixer row, select Start.
f. Wait for the service to start.
g. If you installed Japanese: Run the CLI command utils service restart Cisco Tomcat to restart the Tomcat service.
Note Make sure that the multilingual .cop files are installed on the exact specific CUC build that they were created for. Applying incorrect .cop files for your specific version results in an unexpected behavior of the user conversations.
http://www.cisco.com/en/US/docs/voice_ip_comm/connection/8x/upgrade/guide/8xcucrug027.html#wp1054157
Cheers!
Rob

Failure to upgrade Cisco Unity Connection 8.6.2 to 9.1.2

Hi everybody.
Has someone that can help me with follow problem?
I making a Cisco Unity Connection upgrade from version: 8.6.2.20000-76 to 9.1.2.10000-28. But unfortunately we can't sucessfull to make this process.
On the finish of this process, I can see this outup error:
11/23/2013 12:28:55 upgrade_manager.sh|Cleanup exiting - Cached Data: [Vendor= VMware, Inc.
HWModel=VMware
CPUCount=2
CPUType= Intel(R) Xeon(R) CPU E5-2643 0 @ 3.30GHz
CPUSpeed=3300
MEMSize=6144
BIOSVer=PhoenixTechnologiesLTD 6.00 06/22/2012
ObjectId=1.3.6.1.4.1.9.1.1348
OSVersion=UCOS 5.0.0.0-2
SerialNumber= VMware-56 4d e0 4f 4d 85 87 7b-eb 22 0e 52 a7 73 1a 22
VendorOID=1.3.6.1.4.1.674]|<LVL::Info>
11/23/2013 12:28:55 upgrade_install.sh|Cleaning up download...|<LVL::Info>
11/23/2013 12:28:55 upgrade_install.sh|Cleanup upgrade source area.|<LVL::Info>
11/23/2013 12:28:55 upgrade_install.sh|Ejecting DVD (/dev/sda1)|<LVL::Debug>
11/23/2013 12:28:55 upgrade_install.sh|Removing /common/download/9.1.2.10000-28|<LVL::Info>
11/23/2013 12:28:55 upgrade_install.sh|Started auditd...|<LVL::Info>
11/23/2013 12:28:56 upgrade_install.sh|Started setroubleshoot...|<LVL::Info>
11/23/2013 12:28:56 upgrade_install.sh|Changed selinux mode to enforcing|<LVL::Info>
11/23/2013 12:28:56 upgrade_install.sh|Cleaning up rpm_archive...|<LVL::Info>
11/23/2013 12:28:56 upgrade_install.sh|Removing /common/rpm-archive/9.1.2.10000-28|<LVL::Info>
11/23/2013 12:29:00 upgrade_install.sh|IOWAIT monitor stopped|<LVL::Info>
11/23/2013 12:29:00 upgrade_install.sh|File:/usr/local/bin/base_scripts/upgrade_install.sh:599, Function: main(), Upgrade Failed -- (1)|<LVL::Error>
11/23/2013 12:29:00 upgrade_install.sh|set_upgrade_result: set to 1|<LVL::Debug>
11/23/2013 12:29:00 upgrade_install.sh|is_upgrade_lock_available: Upgrade lock is not available.|<LVL::Debug>
11/23/2013 12:29:00 upgrade_install.sh|is_upgrade_in_progress: Already locked by this process (pid: 14477).|<LVL::Debug>
11/23/2013 12:29:00 upgrade_install.sh|release_upgrade_lock: Releasing lock (pid: 14477)|<LVL::Debug>
Best Regards,
Claudio Costa
A mensagem foi editada por: Claudio Costa

Tks Manish, I just perform a restart on the both nodes on my CUC cluster and after that I did can install this upgrade patch.
Also is very important install the upgrade patch on all servers of the cluster before perform a switch-version on the publisher and then on the others nodes.
Best Regards,
Claudio Costa

ERROR WHILE FORWARDING VOICE MESSAGE FROM NOTES VIEWMAIL TO ANOTHER VOICEMAIL USER IN UNITY CONNECTION

Hello All,
I am facing problem while replying/forwarding or sending a NEW Voice Message from ViewMail integrated with IBM LOTUS Notes 8.5 to the other Voice Mail User Configured in Cisco Unity Connection.The ViewMail Version is 8.0.2 for IBM LOTUS Notes.UC version is 8.x
I have attached the file that displays the error.
From the view mail inbox if i "Right Click" any email and the "Click ON Forward" I am able to forward the Voice Message from the ViewMail to the IBM LOTUS Domino user [ that is forwarding it to EMAIL Account ], but if I try to forward it to unity user is gives "Failure Delivery".
Now when I double click the individual voice mail message in ViewMail account and then click on "Forward/reply/NewMemo" icon available on the individual voice message window that I have opened ,I get an error as stated below
"The remote name could not be resolved error in Notes ViewMail 10.0.0.152e_vmws_gen_property_not_found "
where 10.0.0.152 is the IP-Address of my Unity Connection Server.
Also just for the information I am able to Login into Cisco PCA for alll the users and able to view the Inbox.
I am able to forward the VoiceMessages between Unity Connection users via CISCO PCA without facing any issue.
A Quick Help will be much appreciated .......... :-)
Hasan Jafri

Hello Craig,
After spending sometime on troubleshooting , just for testing purpose I created two new Unity Connection Voice Mail User and configured VMN [VoiceMail for Notes] account on the same lotus Notes.
Interestingly this time I was able to use Reply & Reply to All option to send the Voice Message via VMN. {WORKING JUST FINE,NO PROBLEM WHAT SO EVER ]
But still I am NOT able to use Forward option to send the Voice Messages via VMN.
REPLY WITH HISTORY & REPLY TO ALL WITH HISTORY options are also not working.
This is error that I am getting
"Error in QueryServe in CoreUCClasses 213 at line 336:Vmws:The remote server returned an error:(403) Forbidden
I HAVE CREATED VIDEO RECORDING FOR THIS ERROR & WORKING PART OF THE CONFIG TO GIVE YOU A BETTER IDEA OF THE PROBLEM.
Its 7 MB Recording. I hope you can easily Download.
Also important point is that i don't see any previous error that was accuring during my earlier testing.
Thanks & Regards,
Hasan Jafri

Unity Connection Upgrade from 8.6.2 to 9.1 latest version

Hi,
Am planning to Upgrade my CUC(Unity Connection) from 8.6.2 to 9.1 latest version, having my Call manager in the same version 8.6.2. I will upgrade my Call Manager from 8.6.2 to 9.X later.
Hope i can upgrade my CUC first.
I need some info like,
1) Am not getting the image to download which can upgrade from 8.6.2 to 9.1 latest version directly. Should i have to move to 9.0 first and then to 9.1 ??
2) Is their any pre cautions need to be taken care/ well known issues during the upgrade.
3) Also, hope licensing get migrated automatically (no need to have extra efforts)
4) Advantages of Moving to 9.x wrt to features compared to 8.6.
Pls suggest.
Thanks
Jagadish G

Hi Jagadish,
Just to answer few :
you can downlaod the image from below link under UC Applications amd messaging:
http://software.cisco.com/download/release.html?mdfid=284603371&flowid=45680&softwareid=282074295&release=8.4(1)&relind=AVAILABLE&rellifecycle=&reltype=latest
Supported Version Combinations for Cisco Unity Connection 2.x and Later with Cisco Unified Communications Manager
Cisco Unity Connection
Cisco Unified Communications Manager
2.x and Later
9.1(2), 9.1(1), 9.0(1),8.6(2),8.6(1),8.5(1),8.0(x), 7.1(x), 7.0(x), 6.1(x), 6.0(x), 5.1(x), 5.0(x), 4.3(x), 4.2(x), 4.1(3)
No new functionality has been introduced in UCXN 9.1(2)
http://www.cisco.com/en/US/docs/voice_ip_comm/connection/9x/release/notes/912cucrn.html
for licensing on ELM, u need to get in touch with [email protected] take backup of UCXN 8.6 before initiating upgrades.
regds,
aman

Migrating from Unity 7.0 to Unity Connection 8.5 on a new server.

Hello all.
I am currently in the process of migrating from Unity 7.0 on a windows platform to Unity Connection 8.5 on a new Linux server. I was unaware that UC 8.x runs on Linux so this caught me off guard.
Can someone offer any tips, guides, links, etc. that may help me out?
Also, TAC said the procedure should consist of running a COBRAS Export in Unity 7.0 and then a COBRAS Import on the Unity Connection 8.5 box. I know how to do this on the Windows Platform, but I'm unsure as how to do it via Linux.
Any assistance is greatly appreciated.
Thanks,
James

Correct, you need to download it from the provided link.
Read the help file for information on what is imported and what is not.
http://www.ciscounitytools.com/Applications/General/COBRAS/COBRAS.html
There are also some good training videos from Jeff (the amazingly smart and improbably good looking) :-)
Chris

Unity Connection 8.5.1 Unable to store message

Hi,
We're running a Unity Connection 8.5.1 cluster and have installed 3 extra languages (Dutch,French and German).
When a call gets to Unity and the settings of the user are such that unity answers with the system default language (English), the message can be stored.
But when the user is setup to answer the caller in any of the added languages, the messages cannot be stored.
Any ideas?
Thanks,
Jeroen

Hi Jeroen,
You may be seeing this Bug;
CSCtq97240
Interpreting the bug ▼
Incorrect locale version cause VM outage
Symptom:Unity connection 8.5.1 installed with locales may experience the following issues1.When users try to leave message ,they get the fail safe message
2.Sometimes they are able to leave message , message doesnt get delivered
Conditions:When Locale version ES 24 is installed on UC 8.5(1) [ ES 16] or less
Workaround:please downgrade the locale version to ES 16 or use US English language
Locale ES 24 is meant only for UC 8.5(1)ES17 or later.Though the Release notes of 8.5(1
http://www.cisco.com/web/software/282074314/49311/851su1cucrm.pdfclearly mentions about the compatibility , Many customers think its good for them to install the latest locale ES and hence end with this condition.This defect is just to track the issue and may be we can add a warning in the locale download page in CCO
Related Bug
Status
Fixed
Severity
5 - cosmetic
Last Modified
Jul 18,2011
Product
Cisco Unity Connection
Platform
Dependent
Technology
nav
1st Found-in
8.5
Fixed-in
Cheers!
Rob

Cisco unity connection 8.6.1 / VMware workstation 10.0

Hi
Downloaded the iso file UCSInstall_UCOS_8.6.1.20000-1.sgn.iso to install Cisco unity connection.
Downloads Home
Products
Unified Communications
Unified Communications Applications
Messaging
Cisco Unity Connection
Cisco Unity Connection Version 8.6
Unified Communications Manager / Cisco Unity Connection Updates-8.6(1a)
Installing the same in VM Ware workstation 10.0, but not getting the selection for unity connection. Its automatically installs CUCM 8.6.1.
Please let me know any specific vmware settings to install unity connection 8.6.1.

You are not getting UCxN option because your VMware configuration is not complying with the minimum requirement to install Unity connection.
If you are not installing through OVA template then look at the VM configuration minimum requirement section of that particular version from the link shared by Aman.
Thanks
Manish

Unity Connection 8.5.1ES16.11900-16 upgrade for Single Inbox with Exchange 2007 ?

Hello friends,
I'm currentely running Unity Connection 8.5.1ES16.11900-16.
I would like to use the single inbox feature with Exchange 2007.
It is in the documentation that we need at least Unity Connection 8.5(1) Service Update 1 (UCSInstall_UCOS_8.5.1.11900-21.sgn.iso).
I downloaded, checked MD5 but when searching on the FTP directory it won't accept it (No valid upgrade options were found). Is this a supported upgrade?
Same happens with the localization file in Portuguese that i need to install: uc-locale-pt_PT-8.5.1.1-16.cop.sng ...
Please can you give me some hints about what I may be doing wrong?
Thank you very much and warm regards,
met

Hi Met,
Hope all is well
I think you are hitting this caveat. Although the numbers don't match exactly I'm
pretty sure you will need to wait for an 8.5.1.12xxx.x ES
If the Connection server is running an engineering special with a full Cisco Unified Communications
Operating System version number between 8.5.1.11001-x and 8.5.1.11899-x, do not upgrade the server
to Connection 8.5(1) SU 1 because the upgrade will fail. Instead, upgrade the server with an ES released
after 8.5(1) SU 1 that has a full Unified Communications OS version number of 8.5.1.12xxx.x or later
to get the SU 1 functionality.
http://www.cisco.com/web/software/282074295/44508/851su1cucrm.pdf
Cheers!
Rob

Unity Connection 8.5.1 - upgraded ESXI from 4.1 to 5.1

Hello All,
We just completed upgrading the ESXI version on one of our UCS c210 m2 servers. We went from v4.1 to v5.1. We are currently running CUCM, Unity CXN, and Presence on the server that we upgraded. The other UCS was not upgraded and is running the subscriber version of the same applications.
After the upgrade completed we can not access UNITY Connection.
We are getting "Database Communication Error." The subscriber is still working so we are still in service, but we are afraid that the database has become corrupted and we are seconds away from complete failure.
Please let me know if anyone has encountered the same issue or has any suggestion.
Thanks,
AK

Did you read this:
Patching and Updating VMware vSphere ESXi
In general, Cisco Collaboration app versions only mandate the Major/Minor versions of ESXi they require/support.
Guest OS support - Cisco Collaboration apps that require a minimum Maintenance release (e.g. "5.1 U1" as minimum instead of "5.1" as minimum) for the application to be supported will explicitly call this out on their product detail pages. When in doubt, consult Cisco Plan, Design, Implement (PDI) HelpDesk or Cisco TAC.
Hardware support - For a Major/Minor version of ESXi supported by Cisco Collaboration apps, recommendation is to use the latest Maintenance release that is also supported/recommended by the server vendor (and storage vendor if deploying on NAS/SAN). To help determine if a patch or Maintenance Release of ESXi "can" or "should" be deployed, follow the guidance from these sources:
VMware Compatibilty Guide (http://www.vmware.com/go/hcl)  for the the vSphere ESXi Major/Minor version supported by Cisco Collaboration.
Server Vendor's hardware compatiblity information for the vSphere ESXi Major/Minor version required by Cisco Collaboration. E.g. for Cisco UCS, see the Server Compatiblity documents athttp://www.cisco.com/en/US/partner/products/ps10477/prod_technical_reference_list.html.
http://docwiki.cisco.com/wiki/Unified_Communications_VMware_Requirements
UCXN 8.5 is supported with ESXi 5.1 per:
http://docwiki.cisco.com/wiki/Virtualization_for_Cisco_Unity_Connection#Version_8.5.28x.29
Chris

Upgrade Unity Connection Failing

I am upgrading a Unity Connection from
Version '7.1.5.33900-10 Unrestricted' to '8.5.1.13900-5 Unrestricted'
It fails with hardware validation (error below)
My hardware is a VM on a C210M2
Memory: 6144
CPU: 2
HD1: 146gb
HD2: 146gb
Do I need a special version of CUC for VM?
Any Help appreciated.
James
10/18/2011 14:13:48 upgrade_manager.sh|Check if the upgrade is allowed|<LVL::Info>
10/18/2011 14:13:48 upgrade_manager.sh|Validate hardware for the upgrade|<LVL::Info>
10/18/2011 14:13:48 upgrade_manager.sh|Hardware is supported for the upgrade|<LVL::Info>
10/18/2011 14:13:48 upgrade_manager.sh|Validate hardware for "connection" deployment|<LVL::Info>
10/18/2011 14:13:48 upgrade_manager.sh|File:/common/download/8.5.1.13900-5/Cisco/base_scripts/upgrade_manager.sh:892, Function: validate_upgrade_allowed(), This server is not supported for use with the version of "connection" that you are trying to install. For information on supported servers, see the applicable version of the "connection" Supported Platforms List at http://www.cisco.com/en/US/products/ps6509/products_data_sheets_list.html|<LVL::Error>
10/18/2011 14:13:48 upgrade_manager.sh|Cleanup RAM disk|<LVL::Info>

Right - after much testing - found out the solution to this problem.
The Cisco OVA Templates dont work for CUC for certain install disks (well for at least 7 that I tried !)
Tested Disks (with VSXI version 4.1)
CUCM 8.5 - 80-9842-02
CUCM 8.5 - 80-9927-02
CUCM 8.5 - 80-9929-01
CUCM 8.5 - 80-9842-02
CUCM 8.6.1a - 80-9986-02
CUCM 8.6.1a - 80-9988-02
CUCM 8.6.1a - 80-9989-02
You need to load the OVA template and make the following changes -
Memory     :     6gb (can be set to 8gb if required)
CPU          :     2 (can be set to 3 if required)
Video          :     16mb (hard set)
VMCI          :     Unrestricted (enable checked)
SCSI          :     LSI Logic Parallel
HD          :     200gb - independent persistent
Network      :     needs to be 'connect at power on'
FD              :     Client Device 'Connected' but I dont think this setting matters.
Now Cisco Unity Connection appears at as part of the installable product suite.
I think the OVA templates are extremely poor - clearly untested.
eg - its names your VM - ALIGNED_500User-UnityConnection1CPU160GB.ova etc
Anyway - hope this information help other people from wasting a lot of time.

Unity Connection 8.x and Novell GroupWise IMAP client.

Hi,
Unity Connection 8.x clusters, the customer is using Novell Groupwise for email message store. We would like to setup GroupWise IMAP for them.
However one of the customer's restrictions is that they locked down the end-users computers so that Unity Connection message can not be downloaded into end-user's local PC.
I understand that on Unity Connection COS we can setup the option end-user can only access message header, but they have to dial-in the main-pilot number to retrieve message or use web-inbox tool.
(1) Is there any way for us to setup the IMAP, so that end-user retrieve message while the message is still in centralized Unity Connection server?
(2) If option (1) is not possible, can we setup the message folder of IMAP client to a network shared drive such as H, M drive instead of default local drive?
(3) Any other solution or workaround?
Thanks,
JJ

See sample depiction below of applications and physical core usage on a server with 2 CPUs and 8 total physical cores. In white is the reservation of one physical core.
Regards.

Unity Connection Office 365 Single Inbox - 100 Users Limitation

Hi all,
Goiing over the Unity Connection release notes:
Cisco Unity Connection 8.6(2) Support for Microsoft Office 365
Revised 13 April, 2012
In Cisco Unity Connection 8.6(2) and later, you can configure Connection to synchronize voice messages in Connection user's mailbox with the user's Exchange Online mailbox configured on Microsoft Office 365 environment. Microsoft Office 365 is a cloud hosted collaboration solution provided by Microsoft.
Cisco Unity Connection 8.6(2) SU1 is qualified for 100 users with Microsoft Office 365. For scalability beyond 100 users, you need to contact UCBU Product Management team through [email protected] mailer.
Note The integration beyond 100 users will not be supported by TAC until the BU has signed off on it.
I was aware of the 19 users per Unified Messaging account issue, in which we created several UM Service accounts as a temporary fix until Microsoft lifts the limitation. I wasn't aware of the above that there is a limitation to 100 Users total.
There has been a few posts regarding the 19 user/account issue in which the workaround has been to create up to 20 UM accounts to get up to 380 users as a temporary solution.
Any insight as to when this will be lifted or detailed timelines would be great!
Thanks,
Chris

Hey Chris,
I wouldn't go that route as you nicely noted. The specific locales for su2 are not shown
and I'm pretty confident that this bug would carry over to su2 as well
But then again....I could be way off base here
CSCty54979 - 8.6.x release notes should detail what builds are required for locales
Symptom:
Release notes for Unity Connection 8.6(2a) and 8.6(2a)SU1 are not clear about what builds the use of locales (localizations) are supported with and where they can be acquired
Conditions:
Customers wishing to support non-US English (ENU) languages with Unity Connect 8.6.x
Workaround:
For Unity Connection 8.6(2a), you must install ES12 and use the locale files that are labeled as ES12. The locale files are posted on cisco.com for download, but Unity Connection ES12 is not (you will need to open a TAC case and request a copy of 8.6(2)ES12)
For Unity Connection 8.6(2a)SU1, the 8.6(2)ES12 locales should NOT be used. An updated set of locales will be posted for use with this build in the near future (expected by roughly mid to late April 2012). Also note that if you are currently using the 8.6(2)ES12 locales, you should NOT upgrade to SU1 until the SU1 locales are posted to cisco.com so that you can use them.
If su2 is equivalent to ES44 then they aren't shown on this doc either??
http://www.cisco.com/web/software/Voice/pdf/LocalizationSupportforCUCESreleases.pdf
Cheers!
Rob
"May your heart always be joyful
May your song always be sung" - Bob Dylan

Unity Connection 8.5 Exchange 2010

Does the exchange server need to be in the same location as the Unity Connection 8.5 server for single inbox to work?

In the single inbox design guide here....
http://www.cisco.com/en/US/partner/docs/voice_ip_comm/connection/8x/design/guide/8xcucdg032.html
Calculating the Number of Connections for a Connection Cluster
If both Connection servers in a cluster are in the same location, so they have the same latency when synchronizing with Exchange, you can calculate the number of connections the same way you do for one Connection server.
If one server in a cluster is collocated with the Exchange servers and the other is in a remote location:
•Install the publisher server in the location with the Exchange servers. The publisher server should always be the primary server unless the server is offline for maintenance or is unavailable for some other reason.
Also here in this guide....
http://www.cisco.com/en/US/partner/docs/voice_ip_comm/connection/8x/requirements/8xcucsysreqs.html#wp459928
Unified Messaging Requirements: Synchronizing Connection and Exchange Mailboxes (Single Inbox) (Connection 8.5 and Later Only)
Revised February 22, 2011
•Cisco Unity Connection integrated with a supported version of Microsoft Exchange Server:
–Exchange Server 2010 with Update Rollup 3 or later (All editions are supported.)
–Exchange Server 2010 with Service Pack 1 (All editions are supported.)
–Exchange Server 2007 with Service Pack 2 or later (All editions are supported.)
To synchronize Connection and Exchange 2007 mailboxes, you must install Connection 8.5(1) Service Update 1 (SU1), which is available on the Voice and Unified Communications Downloads page at http://tools.cisco.com/support/downloads/pub/Redirect.x?mdfid=278875240.
In the tree control on the Downloads page, expand Voice and Unified Communications > Unified Communications Applications > Voice Mail and Unified Messaging > Cisco Unity Connection > Cisco Unity Connection Version 8.5. On the Select a Release page, select SU1, and the download buttons appear on the right side of the page.
–Exchange Server 2003 with Service Pack 2 (All editions are supported.)
To synchronize Connection and Exchange 2003 mailboxes, you must install Connection 8.5(1) Service Update 1 (SU1). For download instructions, see the previous bullet.
Microsoft Business Productivity Online Suite is not supported.
•Exchange servers and Active Directory domain controllers/global catalog servers (DC/GCs) can be installed in any hardware virtualization environment supported by Microsoft. (Cisco does not provide technical support for message-store servers or for DC/GCs.)
•The Microsoft Exchange message store can be stored in any storage area network configuration supported by Microsoft. (Cisco does not provide technical support for message-store servers.)
•Exchange clusters are supported.
•To access Exchange servers in more than one forest, you must create at least one unified messaging service for each forest. Connection supports a maximum of 20 unified messaging services per Connection server.
•Depending on the number of voice messaging ports on each Connection server, the path of connectivity must have the following guaranteed bandwidth with no steady-state congestion:
–For 50 voice messaging ports on each server—7 Mbps
–For 100 voice messaging ports on each server—14 Mbps
–For 150 voice messaging ports on each server—21 Mbps
–For 200 voice messaging ports on each server—28 Mbps
–For 250 voice messaging ports on each server—35 Mbps
The bandwidth numbers above are intended as guidelines to ensure proper operation of mailbox synchronization. For information on bandwidth requirements for Connection clusters, see the "Requirements for a Cisco Unity Connection 8.x Cluster" section. Additional conditions such as network congestion, CPU utilization, and message size may contribute to lower throughput than expected. Call-control and call-quality requirements are in addition to the guidelines above and should be calculated by using the bandwidth recommendations in the applicable Cisco Unified Communications SRND at http://www.cisco.com/en/US/partner/solutions/ns340/ns414/ns742/ns818/landing_uc_mgr.html.
•The default Connection configuration is sufficient for a maximum of 2000 users and 80 milliseconds of round-trip latency between Connection and Exchange servers. For more than 2000 users and/or more than 80 milliseconds of latency, you can change the default configuration. For more information, see the " Latency" section in the "Single Inbox in Cisco Unity Connection 8.5 and Later" chapter of the Design Guide for Cisco Unity Connection Release 8.x. at http://www.cisco.com/en/US/partner/docs/voice_ip_comm/connection/8x/design/guide/8xcucdgx.html.
•Users must be assigned to a class of service that is enabled for using single inbox.
•For each user configured for single inbox, an email client that is configured to access the user's Exchange mailbox. For full single-inbox functionality, we recommend that you use Microsoft Outlook and install Cisco ViewMail for Microsoft Outlook. ViewMail for Outlook is required to:
–Review secure Connection voice messages by using Outlook.
–Compose, reply to, or forward synchronized voice messages by using Outlook.
Other email clients can be used to access Connection voice messages in Exchange, but users will not have the functionality provided by ViewMail for Outlook.
For information on Connection support for Outlook, see the "Requirements for Accessing Voice Messages by Using Cisco ViewMail for Microsoft Outlook 8.5 and Later" section.
•For users who are configured for single inbox and SpeechView transcriptions, the message in Exchange is not updated with the transcribed text. You can configure Connection to send a notification message that contains the transcription.
•When message expiration and single inbox are configured, the .wav file is not deleted from the message in Exchange. Voice messages in Connection are still removed from user mailboxes and are replaced with a recording that tells the user "This message is expired."
Specifically teh bandwidth requirements. Typically it's always best to have Exchange as close as possible to the CUC servers for performance to be ideal but this should give you some guidelines.
Tray

Source to download Unity Connection 2.x

Similar Messages

Maybe you are looking for