Source when in Web Perspective
I've changed the source folders in my web application. Eclipse/nitox, died while trying to build the nitox database. I could no longer start eclipse (would say building the nitrox database and hang). Eventually, I went to the project directory, deleted the .m7.poject and restarted. Everything was ok. I set my project to manage as a web application, and things are almost correct.
If the source folder is not under the web directory, it there any way to get the source in the AppXplorer view?.
Hi,
Though it is ideal to have the source within "web" (Or WEB-INF) directory it is not compulsion. As long as you configure Project > Properties > Java Build Path > Source tab pointing to correct location it should be fine.
And regarding the crash it would be helpful if you can describe the exact steps carried out, please send us the below information & log files to [email protected]
* Window > Preferences > Java > Installed JREs - the JRE/JDK version
* Help > About NitroX > Click on Eclipse icon - Version & build id
* Help > About NitroX > Click on NitroX icon - Version & build id
* goto your workspace - ..eclipse\workspace\.metadata - .log file
* goto <NitroX Install Folder>\NitroX\eclipse\plugins\com.m7.nitrox_2.0.0 - m7.log.0 file
Thanks
M7 Support
Similar Messages
-
Cannot connect to the OLAP source - when Scheduling WebI Report
Hi,
I am confused by seeing the above mentioned error on random days....
Scenario - WebI report scheduled daily:
Some days the report works fine and other days it is not processing correctly but gives me this error message "Cannot connect to the OLAP source".
Our connection is via BICS and it is SSO. Data Source is BW and we use BEX.
Person who scheduled report has admin rights, our version is 4.0 SP7 P5.
Please advise if anyone has faced this issue and if there is a solution, did try the community but only found that the key store was a problem but that was previous versions.
Any help or input is much appreciated.
Kind regards,
Sarat.Hi Sarat,
This problem can occur for multiple different reasons, so it's hard to give an advice for such symptom. Could you look at trace files from SemanticLayer component (it is hosted in APS with DSLBridge service), you should find clearer errors which can then be analyzed. There is no need to activate logs if it is still at level 'Unspecified', errors have level high enough to be output by default.
Regards,
Loic -
Working on BBPCRM 3.1 having this dump when testing web pages. Page contains the typical start pages of SAP hello world and a simple button...
Runtime Errors TEXTENV_INVALID
Exception CX_SY_LOCALIZATION_ERROR
Occurred on 19.09.2005 at 09:48:01
Error when generating text environment.
What happened?
What can you do?
Error analysis
How to correct the error
System environment
User, transaction...
Information on where terminated
Source code extract
001550 DLI_UPDATE = 'X'
001560 UPDCHK = 'U'
001570 EXCEPTIONS
001580 OTHERS = 1.
001590 COMMIT WORK.
001600 WHEN OTHERS.
001610 ENDCASE.
001620 ENDIF.
001630
001640 ENDIF. " updchk = c
001650
001660 * update the data
001670 IF UPDCHK EQ 'U'.
001680 IF FOL_UPDATE NE SPACE.
001690 * update for folder definitions
001700 PERFORM V_SOFD_PUBSEL(SAPFSSO6)
001710 TABLES V_SOFD_TAB
001720 USING RCODE.
001730 PERFORM SOFIND_SELARR_ALL_FOL(SAPFSSO6)
001740 TABLES SOFIND_TAB
001750 USING RCODE.
001760 SORT SOFIND_TAB. " yxu170797
001770 LOOP AT V_SOFD_TAB INTO V_SOFD_REC.
001780 CLEAR SOFIND_REC.
001790 MOVE: V_SOFD_REC-MANDT TO SOFIND_REC-MANDT,
001800 FLN TO SOFIND_REC-TYPE,
001810 V_SOFD_REC-OBJNAM TO SOFIND_REC-OBJDES,
001820 V_SOFD_REC-FOLTP TO SOFIND_REC-OBJTP,
001830 V_SOFD_REC-FOLYR TO SOFIND_REC-OBJYR,
001840 V_SOFD_REC-FOLNO TO SOFIND_REC-OBJNO.
> SET LOCALE LANGUAGE V_SOFD_REC-OBJLA.
001860 TRANSLATE SOFIND_REC-OBJDES TO UPPER CASE.
001870 SET LOCALE LANGUAGE SPACE.
001880 READ TABLE SOFIND_TAB INTO SOFIND_TAB_REC
001890 WITH KEY MANDT = SOFIND_REC-MANDT
001900 TYPE = SOFIND_REC-TYPE
001910 OBJDES = SOFIND_REC-OBJDES
001920 OBJTP = SOFIND_REC-OBJTP
001930 OBJYR = SOFIND_REC-OBJYR
001940 OBJNO = SOFIND_REC-OBJNO
001950 BINARY SEARCH.
001960 IF SY-SUBRC NE 0.
001970 APPEND SOFIND_REC TO SOFIND_INS_TAB.
001980 ELSE.
001990 DELETE SOFIND_TAB INDEX SY-TABIX.
002000 ENDIF.
002010 CLEAR SOFIND_REC.
002020 MOVE: V_SOFD_REC-MANDT TO SOFIND_REC-MANDT,
002030 FLD TO SOFIND_REC-TYPE,
002040 V_SOFD_REC-OBJDES TO SOFIND_REC-OBJDES,
Contents of system fields
SY field contents..................... SY field contents.....................
SY-SUBRC 0 SY-INDEX 0
SY-TABIX 1 SY-DBCNT 2
SY-FDPOS 0 SY-LSIND 0
SY-PAGNO 0 SY-LINNO 1
SY-COLNO 1 SY-PFKEY
SY-UCOMM SY-TITLE Update control
SY-MSGTY SY-MSGID
SY-MSGNO 000 SY-MSGV1
SY-MSGV2 SY-MSGV3
SY-MSGV4
Active calls / events
No.... Type........ Name..........................
Program
Include Line
Class
6 FUNCTION SO_SOFIND_UPDATE
SAPLSOC3
LSOC3U11 185
5 FORM SO_SOFIND_UPDATE
SAPLSOC3
LSOC3V11 35
4 FORM VB_CALL_FUNC
RSM13000
RSM13000 5441
3 FORM VB_V1_EXEC
RSM13000
RSM13000 5182
2 FORM VB_V1_NORMAL
RSM13000
RSM13000 3944
1 MODULE (PBO) VBEXEC
RSM13000
RSM13000 3793
Chosen variables
6 FUNCTION SO_SOFIND_UPDATE
SAPLSOC3
LSOC3U11 185
DLI_UPDATE
2
0
FOL_UPDATE X
5
8
UPDCHK U
5
5
V_SOFD_TAB Table IT_1[2x141]
RCODE 0
0000
0000
SYST-REPID SAPLSOC3
5454544322222222222222222222222222222222
310C3F3300000000000000000000000000000000
SOFIND_TAB Table IT_2[2x73]
ROLE_MAILER 4
3
4
V_SOFD_REC 100FOL28000000000001 D#
3334443333333333333322222222222222222422
1006FC2800000000000100000000000000000430
... + 40 #
2222222222222222222222222222222222222222
0000000000300000000000000000000000000000
... + 80 Q 0
2222222222222222222252222222222222222223
0000000000000000000010000000000000000000
... + 120 000120050808 20050808
333333333333233333333
000120050808020050808
VWST VWST
5555222222222222222222222222222222222222
6734000000000000000000000000000000000000
... + 40
222222222222222222222222222222
000000000000000000000000000000
SOFIND_REC 100FLN#
3334442222222222222222222222222222222222
1006CE3000000000000000000000000000000000
... + 40 FOL28000000000001
222222222222222244433333333333333
00000000000000006FC28000000000001
SENDMAIL_TOKEN_NOT_FOUND 90
0005
000A
USDI USDI
5544222222222222222222222222222222222222
5349000000000000000000000000000000000000
... + 40
222222222222222222222222222222
000000000000000000000000000000
SPOOL_READ_ERROR 56
0003
0008
SY-REPID SAPLSOC3
5454544322222222222222222222222222222222
310C3F3300000000000000000000000000000000
SOFIND_REC-OBJDES #
2222222222222222222222222222222222222222
3000000000000000000000000000000000000000
... + 40
2222222222
0000000000
V_SOFD_REC-OBJNAM #
222222222222
300000000000
SCR SCR
545
332
USRE USRE
5554222222222222222222222222222222222222
5325000000000000000000000000000000000000
... + 40
222222222222222222222222222222
000000000000000000000000000000
OBJ OBJ
444
F2A
USSA USSA
5554222222222222222222222222222222222222
5331000000000000000000000000000000000000
... + 40
222222222222222222222222222222
000000000000000000000000000000
URL URL
554
52C
USSI USSI
5554222222222222222222222222222222222222
5339000000000000000000000000000000000000
... + 40
222222222222222222222222222222
000000000000000000000000000000
%_DUMMY$$
2222
0000
DX40 DX40
4533222222222222222222222222222222222222
4840000000000000000000000000000000000000
... + 40
222222222222222222222222222222
000000000000000000000000000000
SOFIND_TAB_REC
2222222222222222222222222222222222222222
0000000000000000000000000000000000000000
... + 40
222222222222222222222222222222222
000000000000000000000000000000000
ATTA ATTA
4554222222222222222222222222222222222222
1441000000000000000000000000000000000000
... + 40
222222222222222222222222222222
000000000000000000000000000000
OFFICE_TASO13 SO13
5433222222222222222222222222222222222222
3F13000000000000000000000000000000000000
... + 40
222222222222222222222222222222
000000000000000000000000000000
SOFIND_REC-MANDT 100
333
100
OFFICE_TASO14 SO14
5433222222222222222222222222222222222222
3F14000000000000000000000000000000000000
... + 40
222222222222222222222222222222
000000000000000000000000000000
SOFIND_REC-TYPE FLN
444
6CE
OFFICE_TASO15 SO15
5433222222222222222222222222222222222222
3F15000000000000000000000000000000000000
... + 40
222222222222222222222222222222
000000000000000000000000000000
5 FORM SO_SOFIND_UPDATE
SAPLSOC3
LSOC3V11 35
ROLE_SUBST_ACTIVE 3
3
3
%_STATE Y
5
9
%_PRINT 000
2222333222222222222222222222222222222222
0000000000000000000000000000000000000000
... + 40
2222222222222222222222222222222222222222
0000000000000000000000000000000000000000
... + 80 0 ########
2222222222320000000022222222222222222222
0000000000000000000000000000000000000000
... + 120
2222222222222222222222222222222222222222
0000000000000000000000000000000000000000
... + 160 0 ####
222222222222223222222222222222220000
000000000000000000000000000000000000
URLA URLA
5544222222222222222222222222222222222222
52C1000000000000000000000000000000000000
... + 40
222222222222222222222222222222
000000000000000000000000000000
%_KEY 432D0497CD9B3890E1000000AC101A01####
333433334434333343333333443334330000
432404973492389051000000131011010001
SY-SUBRC 0
0000
0000
REMA REMA
5444222222222222222222222222222222222222
25D1000000000000000000000000000000000000
... + 40
222222222222222222222222222222
000000000000000000000000000000
%_P0000000001 X
5
8
RERE RERE
5454222222222222222222222222222222222222
2525000000000000000000000000000000000000
... + 40
222222222222222222222222222222
000000000000000000000000000000
%_P0000000002
2
0
REPA REPA
5454222222222222222222222222222222222222
2501000000000000000000000000000000000000
... + 40
222222222222222222222222222222
000000000000000000000000000000
%_P0000000003 U
5
5
SY-XFORM
222222222222222222222222222222
000000000000000000000000000000
4 FORM VB_CALL_FUNC
RSM13000
RSM13000 5441
SAVE_VBPARAM #
0
3
VBPARAM 432D0497CD9B3890E1000000AC101A010001SO_S
3334333344343333433333334433343333335455
4324049734923890510000001310110100013FF3
... + 40 OFIND_UPDATE PSAKINDI 10
4444455544542222222222222255444444222233
F69E4F50414500000000000000031B9E49000010
... + 80 0### ##
3000222222222222222222222222222220022222
0612000000000000000000000000000001100000
... + 120
2222222222222222222222222222222222222222
0000000000000000000000000000000000000000
... + 160
2222222222222222222
0000000000000000000
VBHDR-VBTCODE SO00
54332222222222222222
3F000000000000000000
VBHDR-VBREPORT SAPLSOC3
5454544322222222222222222222222222222222
310C3F3300000000000000000000000000000000
VBMODCNT 1
0000
0001
DLDE DLDE
4444222222222222222222222222222222222222
4C45000000000000000000000000000000000000
... + 40
222222222222222222222222222222
000000000000000000000000000000
VBPARAM-VBPHASE 16916512
0
1
VB_V1_TEST #
0
2
SYST-REPID RSM13000
5543333322222222222222222222222222222222
23D1300000000000000000000000000000000000
HGEN HGEN
4444222222222222222222222222222222222222
875E000000000000000000000000000000000000
... + 40
222222222222222222222222222222
000000000000000000000000000000
IS_A_ARFC #
0
0
TH_TRUE #
0
1
OFFICE_TASO00 SO00
5433222222222222222222222222222222222222
3F00000000000000000000000000000000000000
... + 40
222222222222222222222222222222
000000000000000000000000000000
TH_FALSE #
0
0
VBDEBUG 35659808
0
2
VBSELECT-VBANZAHL 00000
33333
00000
EWST EWST
4555222222222222222222222222222222222222
5734000000000000000000000000000000000000
... + 40
222222222222222222222222222222
000000000000000000000000000000
BACK BAC
4442222222222222222222222222222222222222
2130000000000000000000000000000000000000
... + 40
222222222222222222222222222222
000000000000000000000000000000
TFDIR SO_SOFIND_UPDATE SAPLSOC3
5455444445554454222222222222225454544322
3FF3F69E4F50414500000000000000310C3F3300
... + 40 1100000000
2222222222222222222222222222223333333333
0000000000000000000000000000001100000000
... + 80 S 1
52222222222223
30000000000001
TFDIR-PNAME SAPLSOC3
5454544322222222222222222222222222222222
310C3F3300000000000000000000000000000000
VBFUNC SO_SOFIND_UPDATE
545544444555445422222222222222
3FF3F69E4F50414500000000000000
%_DUMMY$$
2222
0000
VBID 432D0497CD9B3890E1000000AC101A01####
333433334434333343333333443334330000
432404973492389051000000131011010001
VBSTAT-PROC2_REQ
222222222222222
000000000000000
VB_UPDATE_MODUL_PROCESSED #
1
C
3 FORM VB_V1_EXEC
RSM13000
RSM13000 5182
ROLE_SUBST_ACTIVE 3
3
3
VBMOD_TABL-VBMODE 1
3
1
VB_COLLECTOR_FB 5
3
5
SY-REPID RSM13000
5543333322222222222222222222222222222222
23D1300000000000000000000000000000000000
LISL LISL
4454222222222222222222222222222222222222
C93C000000000000000000000000000000000000
... + 40
222222222222222222222222222222
000000000000000000000000000000
EXISTS_COLLECTOR #
0
0
VB_V1_FB 1
3
1
VB_V1_NO_UPD_AGAIN_FB 3
3
3
VBHDR-VBSTATE -16759503
F
F
VB_V1_PROCESSED #
0
1
VB_V1_AND_V2_PROCESSED #
0
2
SYST ########################################
0000000000000000000000000000000000000000
0000000000010002000000000000000000000000
... + 40 ########################################
0000000000000000000000090000000000000008
00020000000100000001000A000000000000000D
... + 80 ########################################
0000000000000000000000000000000000000000
0000000000000000000000000000000000000000
... + 120 ########################################
0000000000000000000000000000000000010009
00000000000000000000000000000000000B0000
... + 160 ################X ############# E0 3
0000000000000000520000000000000222432223
0000000000000000800010000C0000C000500003
... + 200 000 N ####__S 100
3332222222420000555222222222222222223332
0000000000E00000FF3000000000000000001000
... + 240 00
222223322222222
000000000000000
MTAS MAS
4452222222222222222222222222222222222222
D130000000000000000000000000000000000000
... + 40
222222222222222222222222222222
000000000000000000000000000000
VBMOD_TABL-VBKEY 432D0497CD9B3890E1000000AC101A01
33343333443433334333333344333433
43240497349238905100000013101101
VBMOD_TABL-VBFUNC SO_SOFIND_UPDATE
545544444555445422222222222222
3FF3F69E4F50414500000000000000
VBMOD_TABL-VBMODCNT 1
0000
0001
LOC_VBPARAM-VBPHASE 16916512
0
1
LOC_VBPARAM-VBDEBUG 35659808
0
2
READ READ
5444222222222222222222222222222222222222
2514000000000000000000000000000000000000
... + 40
222222222222222222222222222222
000000000000000000000000000000
EXISTS_V2 #
0
0
SPACE
2
0
NEW_VBSTATE 0
0
0
VBHDR 432D0497CD9B3890E1000000AC101A01100PSAKI
3334333344343333433333334433343333355444
43240497349238905100000013101101100031B9
... + 40 NDI SAPLSOC3
4442222222222222222545454432222222222222
E490000000000000000310C3F330000000000000
... + 80 SO00
2222222222222222222543322222222222222222
00000000000000000003F0000000000000000000
... + 120
2222222222222222222222222222222222222222
0000000000000000000000000000000000000000
... + 160 ###�sapzoo_SMG_00
22222222222222222222000F7677665544533222
00000000000000000000000F310AFFF3D7F00000
... + 200
2222222222222222222222222222222222222222
0000000000000000000000000000000000000000
... + 240 :E:
222222223432222
00000000A5A0000
OFFICE_TASO18 SO18
5433222222222222222222222222222222222222
3F18000000000000000000000000000000000000
... + 40
222222222222222222222222222222
000000000000000000000000000000
LOC_VBPARAM 432D0497CD9B3890E1000000AC101A010001SO_S
3334333344343333433333334433343333335455
4324049734923890510000001310110100013FF3
... + 40 OFIND_UPDATE PSAKINDI 10
4444455544542222222222222255444444222233
F69E4F50414500000000000000031B9E49000010
... + 80 0### ##
3000222222222222222222222222222220022222
0612000000000000000000000000000001100000
... + 120
2222222222222222222222222222222222222222
0000000000000000000000000000000000000000
... + 160
2222222222222222222
0000000000000000000
SY-XPROG
2222222222222222222222222222222222222222
0000000000000000000000000000000000000000
SY-XFORM
222222222222222222222222222222
000000000000000000000000000000
2 FORM VB_V1_NORMAL
RSM13000
RSM13000 3944
VBHDR-VBCLIINFO #
0
0
VB_SYNC_VB #
0
1
%_ARCHIVE
2222222222222222222222222222222222222222
0000000000000000000000000000000000000000
... + 40
2222222222222222222222222222222222222222
0000000000000000000000000000000000000000
... + 80
2222222222222222222222222222222222222222
0000000000000000000000000000000000000000
... + 120
2222222222222222222222222222222222222222
0000000000000000000000000000000000000000
... + 160
2222222222222222222222222222222222222222
0000000000000000000000000000000000000000
... + 200
2222222222222222222222222222222222222222
0000000000000000000000000000000000000000
... + 240
222222222222222
000000000000000
SY-MSGID
22222222222222222222
00000000000000000000
ROOM_TAPP30 PP30
5533222222222222222222222222222222222222
0030000000000000000000000000000000000000
... + 40
222222222222222222222222222222
000000000000000000000000000000
ADMI ADM
4442222222222222222222222222222222222222
14D0000000000000000000000000000000000000
... + 40
222222222222222222222222222222
000000000000000000000000000000
SY-MSGNO 000
333
000
NOTE_NOT_ADDED 11
0000
000B
SY-MSGV1
2222222222222222222222222222222222222222
0000000000000000000000000000000000000000
... + 40
2222222222
0000000000
SY-MSGV2
2222222222222222222222222222222222222222
0000000000000000000000000000000000000000
... + 40
2222222222
0000000000
SY-MSGV3
2222222222222222222222222222222222222222
0000000000000000000000000000000000000000
... + 40
2222222222
0000000000
SY-MSGV4
2222222222222222222222222222222222222222
0000000000000000000000000000000000000000
... + 40
2222222222
0000000000
LOGO LOG
4442222222222222222222222222222222222222
CF70000000000000000000000000000000000000
... + 40
222222222222222222222222222222
000000000000000000000000000000
VBHDR 432D0497CD9B3890E1000000AC101A01100PSAKI
3334333344343333433333334433343333355444
43240497349238905100000013101101100031B9
... + 40 NDI SAPLSOC3
4442222222222222222545454432222222222222
E490000000000000000310C3F330000000000000
... + 80 SO00
2222222222222222222543322222222222222222
00000000000000000003F0000000000000000000
... + 120
2222222222222222222222222222222222222222
0000000000000000000000000000000000000000
... + 160 ###�sapzoo_SMG_00
22222222222222222222000F7677665544533222
00000000000000000000000F310AFFF3D7F00000
... + 200
2222222222222222222222222222222222222222
0000000000000000000000000000000000000000
... + 240 :E:
222222223432222
00000000A5A0000
1 MODULE (PBO) VBEXEC
RSM13000
RSM13000 3793
VB_V1_NORMAL #
0
1
%_SPACE
2
0
STOP RET
Hi Stephan,
unless we don't ask for it, please do not post this much content. This might be suitable for support messages, but not for this forum. There might be situations where you get asked for more information, but a post like this one just scares of anyone who might know an answer.
Also, your thread title does not give any information on your problem, as a "dump when testing web pages" can be anything.
I would suggest to re-state your question, just giving the information that others need.
I haven't worked with CRM, but I wonder if this is a custom application or a shipped one. -
WRT54G2 and WRT54G locks-up (freezes) when blocking web sites using Access Restrictions
I am convinced that a few Linksys routers such as WRT54G2 and WRT54G have a major issue when blocking web sites using Access Restrictions (Internet Access Policy). After a few hours of internet access by 15 wired users the Linksys locks-up and blocks all internet web access. The only solution is to restart the power on the router.
We are currently using a Linksys WRT54G2 v1 (firmware 1.0.04). We upgraded the WRT54G2 v1 firmware to the latest 1.0.04 version which did not resolve the issue. NOTE: We were previosuly using a a Linksys WRT54G v1.1 (firmware 4.21.1) until the power supply blew a week after we started blocking web sites using Access Restrictions (Internet Access Policy).
Basically, we have a T1 internet connection and a hub connected to the Linksys router. We are trying to block several web sites such as facebook, myspace, etc. for 15 wired users. We do not use wireless connections.
This is the 2nd time it happened with 2 different models.
Please help ASAP.
Thank you,
Lance
(Mod note: Edited post. Some parts off topic.. Thanks!)Also, you have already upgrade/re-flash the firmware of your Linksys Router you need to reset and reconfigure your router from scratch. Press and hold the reset button for 30 seconds...Release the reset button...Unplug the power cable from your router, wait for 30 seconds and re-connect the power cable...Now re-configure your router...
-
Error when inserting Web Dynpro script in Adobe form
Hi
In my WD component in one of the view I have an ADOBE form (Online scenario) and a button to save data into backend. In the ADOBE form everything is working properly, however the problem is when I click on the button to save, Its not getting into my action code. Even I am not getting any error other than the wait symbol.
In the form I have taken ZCI layout but when i'm inserting Webdynpro Script its showing an error 'Error when inserting Web Dynpro script'.
Please let me know why this error is getting.
Thanks
RamHi Ram,
I hope you help me,
I have the same error, when I insert a web Dynrp Script, what version of SAPGUI do you use?
Thanks -
Error when refreshing WEBI report with Universe Connection Type "SSO"
Hi Experts:
We are trying to refresh the Webi report in Infoview with Universe Connection set as "Use Single Sign On when refreshing the report at view time", so that we can leverage SAP OLAP authorization variable from Bex Query which the Universe is built on.
However got the error of "incomplete logon data" after all the configurations done following below blogs:
SNC Part 1
/people/ingo.hilgefort/blog/2009/07/03/businessobjects-enterprise-and-client-side-snc-part-1-of-2
SNC Part 2
/people/ingo.hilgefort/blog/2009/07/03/businessobjects-enterprise-and-client-side-snc-part-2-of-2
We already have Win AD SSO to SAP setup, and in BO CMC, Win AD user is mapped to SAP user ID.
The SNC settings are:
- AD Account: service.test.bobj (all lower-letters)
- 32-bit gsslib on the BO server, and 64 bit on the BW server side.
- SNC0: p:service.test.bobj at DOMAIN
- SU01 --> BO_Service ; SNC: p:service.test.bobj at DOMAIN
- Entitlement system tab --> username: BO_Service
SNC Name: p:service.test.bobj at DOMAIN
- SNC settings tab:
SNC Lib: c:\winnt\gsskrb5.dll
Mutual Authentication settings: p:SAPServiceBP0 at DOMAIN
In CMC, the role can be imported if "RFC activated" option unchecked in SNC0.
I found a few threads on the same topic, but they are all not answered:
SNC Client side configuration error
SNC Configuration Error: Incomplete logon Data
Can you please provide details of the solution if you have impleted a same scenario successsfully, or any thoughts to help the investigation?
Thanks in advance!
Regards,
JonathanHi Ingo,
Sorry for taking so long to reply, we are trying to set up server side trust and enable SSO; but we still couldn't success.
What we did is:
1. We followed installation guide chapter 6, generate certificate and PSE, etc. All looks good.
2. Then we still have the "incomplete logon data" error when refreshing webi report after logon using Windows AD user ID.
3. Then we trace the PFC connection, the log is as below. We checked several BO notes, e.g. 1500150, 1461247.. The part bothers us is that we even don't have URI displayed in the log when system trying to use SNC, and we couldn't get more info on this which make us very difficult to diagnosis.
Can you please help? Thanks a lot!
Thu Mar 31 10:54:46.857 ThreadID<1980> SAPMODULE : SAPAuthenticationService: Authentication model for SAP connectivity is SSO
Thu Mar 31 10:54:46.857 ThreadID<1980> SAPMODULE : SAPAuthenticationService: Determining if we can connect using SNC. Calling CanAuthenticate...
Thu Mar 31 10:54:46.919 ThreadID<1980> SAPMODULE : SAPAuthenticationService: Unable to authenticate using SNC because the URI does not meet the minimum connection requirements.
Thu Mar 31 10:54:46.919 ThreadID<1980> SAPMODULE : SAPAuthenticationService: Determining if we can connect using SSO. Calling CanAuthenticate...
Thu Mar 31 10:54:46.919 ThreadID<1980> SAPMODULE : SAPAuthenticationService: Authentication model for SAP connectivity is SSO
Thu Mar 31 10:54:47.013 ThreadID<1980> SAPMODULE : SAPAuthenticationService: The SAP SSO authentication process will fail because the SAP secondary credential are not properly updated and the password is blank.
Thu Mar 31 10:54:47.013 ThreadID<1980> SAPMODULE : SAPAuthenticationService: Trying to connect to SAP using this URI : occa:sap://;PROVIDER=sapbw_bapi,R3NAME=PB0,GROUP=BI_Group1,MSHOST=sapaupdb04,LANG=en,CLIENT=100,CATALOG="ZSPUM602",CUBE="ZSPUM602/ZSPUM602_Q50"
Thu Mar 31 10:54:47.013 ThreadID<1980> SAPMODULE : SAPAuthenticationService: Calling m_pRfcWrapper->RfcOpenEx() ...
Thu Mar 31 10:54:47.154 ThreadID<1980> SAPMODULE : SAPAuthenticationService: RfcOpenEx(...) returned 0
Thu Mar 31 10:54:47.154 ThreadID<1980> SAPMODULE : SAPAuthenticationService: Call to m_pRfcWrapper->RfcOpenEx() took 0.141 seconds
Thu Mar 31 10:54:47.154 ThreadID<1980> SAPMODULE : SAPAuthenticationService: SAPAuthenticationService::~SAPAuthenticationService -
ORA-28868 error when calling Web service over HTTPS from PL/SQL utl_http
I am getting error message ORA-28868 error when calling Web service over HTTPS from PL/SQL utl_http PL/SQL package,
when browsed through some of the messages they point to setting Oracle Wallet Manager.
I am trying to connect
Any idea on how to resolve this issue ?
your input is appreciated.
Thanks
RaviDuplicate post ... please ignore.
-
"Error while parsing SOAP XML payload: no element found" received when invoking Web Service
Running PB 12.1 Build 7000. Using Easysoap. Error ""Error while parsing SOAP XML payload: no element found" received when invoking Web Service". This error does not appear to be coming from the application code. Noticed that there were some erroneous characters showing up within the header portion of the XML ("&Quot;"). Not sure where these are coming from. When I do a find within the PB code for """" it gets located within two objects, whereas they both reference a "temp_xml_letter". Not sure where or what temp_xml_letter resides??? The developer of this is no longer with us and my exposure to WSDL and Web Services is rather limited. Need to get this resolved...please.
This is the result of the search. Notice the extraneous characters ("""):
dar1main.pbl(d_as400_mq_xml)
darlettr.pbl(d_email_xml)
---------- Search: Searching Target darwin for 'temp_xml' (9:52:41 AM)
---------- 2 Matches Found On "temp_xml":
dar1main.pbl(d_as400_mq_xml).d_as400_mq_xml: export.xml(usetemplate="temp_xml_letter" headgroups="1" includewhitespace="0" metadatatype=0 savemetadata=0 template=(comment="" encoding="UTF-8" name="temp_xml_letter" xml="<?xml version=~"1.0~" encoding=~"UTF-16LE~" standalone=~"yes~"?><EmailServiceTransaction xmlns=~"http://xml.xxnamespace.com/Utility/Email/EmailService" ~" xmlns:imc=~"http://xml.xxnamespace.com/IMC~" xmlns:xsi=~"http://www.w3.org/2001/XMLSchema-instance~" xmlns:root=~"http://xml.xxnamespace.com/RootTypes~" xmlns:email=~"http://xml.xxnamespace.com/Utility/Email~" xsi:schemaLocation=~"http://xml.xxnamespace.com/Utility/Email/EmailService http://dev.xxnamespace.com/Utility/Email/EmailService/V10-TRX-EmailService.xsd~"><EmailServiceInformation><EmailServiceDetail __pbband=~"detail~"><ApplicationIdentifier> applicationidentifier </ApplicationIdentifier><AddresseeInformation><AddresseeDetail><Number> number </Number></AddresseeDetail></AddresseeInformation><EmailMessageInformation><Ema
darlettr.pbl(d_email_xml).d_email_xml: export.xml(usetemplate="temp_xml_letter" headgroups="1" includewhitespace="0" metadatatype=0 savemetadata=0 template=(comment="" encoding="UTF-8" name="temp_xml_letter" xml="<?xml version=~"1.0~" encoding=~"UTF-16LE~" standalone=~"yes~"?><EmailServiceTransaction xmlns=~"http://xml.xxnamespace.com/Utility/Email/EmailService" ~" xmlns:imc=~"http://xml.xxnamespace.com/IMC~" xmlns:xsi=~"http://www.w3.org/2001/XMLSchema-instance~" xmlns:root=~"http://xml.xxnamespace.com/RootTypes~" xmlns:email=~"http://xml.xxnamespace.com/Utility/Email~" xsi:schemaLocation=~"http://xml.xxnamespace.com/Utility/Email/EmailService http://dev.xxnamespace.com/Utility/Email/EmailService/V10-TRX-EmailService.xsd~"><EmailServiceInformation><EmailServiceDetail __pbband=~"detail~"><ApplicationIdentifier> applicationidentifier </ApplicationIdentifier><AddresseeInformation><AddresseeDetail><Number> imcnumber </Number></AddresseeDetail></AddresseeInformation><EmailMessageInformation><Ema
---------- Done 2 Matches Found On "temp_xml":
---------- Finished Searching Target darwin for 'temp_xml' (9:52:41 AM)Maybe "extraneous" is an incorrect term. Apparantly, based upon the writeup within Wiki, the parser I am using does not interpret the """? How do I find which parser is being utilized and how to control it?
<<<
If the document is read by an XML parser that does not or cannot read external entities, then only the five built-in XML character entities (see above) can safely be used, although other entities may be used if they are declared in the internal DTD subset.
If the document is read by an XML parser that does read external entities, then the five built-in XML character entities can safely be used. The other 248 HTML character entities can be used as long as the XHTML DTD is accessible to the parser at the time the document is read. Other entities may also be used if they are declared in the internal DTD subset.
>>> -
Can we set the dynamic data source when using getReportParameters() ?
Hello!
I have a report where one of its parameters refers to a list of values (LOVs). This list of values is an SQL Query type. When the data source used in the report is defined in the BI Publisher server, I'm able to get the report parameters using the getReportParameters() function in my application. However, if the data source is not defined the function throws an exception, which is understandable.
I decided to dynamically set the data source so that even if the data source used by the report is not defined in the BI Publisher server, it still will be able to get the LOVs for the parameter. I tried setting the JDBCDataSource of the dynamicDataSource for the ReportRequest object that I passed to the getReportParameters() function. Please see the sample code below:
reportRequest.dynamicDataSource = new BIP10.BIPDataSource();
reportRequest.dynamicDataSource.JDBCDataSource = new BIP10.JDBCDataSource();
setReportDataSource(reportRequest.dynamicDataSource.JDBCDataSource, connectstr, jdbc, dc); //function to set the values for JDBCDataSource object
reportParams = webrs.getReportParameters(reportRequest, uid, pwd); //call the getReportParameters
I was expecting this to work as this is what I did to dynamically set the data source before calling the runReport function. So, my question is -- can we set the dynamic data source when using getReportParameters() ? I tried this both in versions 10g and 11g. It does not seem to work on both versions.
Regards,
Stephaniereport_id column of apex_application_page_ir_rpt can help us uniquely identify each saved report.
We can assign this report_id value to a page item and this page item can be put in the Report ID Item text box of the Advanced section of the Report Attributes page of the IR.
This should load the saved report identified by report_id and you can get rid of javascript
Regards,
Vishal
http://obiee-oracledb.blogspot.com
http://www.packtpub.com/oracle-apex-4-2-reporting/book
Kindly mark the reply as helpful/correct if it solves your problem -
Not able to access the multi-source universe in WebI
Hi
I am not able to access the multi-source universe in WebI, getting below error message.
[Data Federator Driver] Unexpected exception: com.crystaldecisions.thirdparty.org.omg.CORBA.UNKNOWN: null | [Data Federator Driver] Failed to connect to any of the provided 'Central Management Server' hosts.
And also Not able to perform anything to designing multi-source universe in business Layer.
Universe back-end is
Oracle 11g and
SQL2008 DB
Version IDT: 4.1 Support Pack 2
SAP BusinessObjects BI Platform 4.1 Support Pack 2,Hi Sreeni,
You can create a new APS in CMC containing the Data Federation Service with
-Xmx2g -> 8g (This is the suggested range)
Make sure you remove this service from the existing APS and then create a new one.
You could refer SAP KBA 1694041 - BI 4.x Consulting:- How to size the Adaptive Processing
Server (APS) which would assist you in sizing the APS.
Regards,
Manpreet -
Error when inserting Web Dynpro script
Hello,
I am trying to create a new form using fields from KNA1 and am using ISR controls. When I try to insert Webdynpro scripts i get message "Error when inserting Web Dynpro script" Message no. FPUIFB094.
Has anyone faced this error? no notes are available regarding this and in SDN.
Regards
PrasadIt must be atleast ALD 7.1. Check this [Thread|Re: Problem on Button; having the same issue. Also check the SAPNOTE 962763.
-
How do I make changes in the page source of my web page?
What feature of firefox do I use to make changes in the page source of my web page?
Please see this thread: https://support.mozilla.com/en-US/questions/740322
If this answers your question, please click the '''Solved it''' button next to this post after you log in into the forum. This will help others searching for a solution to the same subject.
Thanks. -
Missing data when exporting webi to excel (not 65536 limit problem)
Hi guys
I just meet a problem about webi that it will miss data when exporting webi to excel.
It's not about 65536 limitation, as my webi report do some aggregration and limitation and never beyond that limitation.
Also there are 2 tabs in my reports, if I split the 2 tabs into 2 separate reports and export them separately, then problem disappeared.
Any ideas on this?Hello Claes
according to:
http://help.sap.com/erp2005_ehp_05/helpdata/en/c1/eda0f591ec12408b25e7a1b369ca45/frameset.htm
Tools => Import and Export => Specifying the Sequence of the External Data Structure => External File Structure: Specification
Table EST07 should be part of export file. I am not sure if the packing requirement ist part of EST07.
Furthermore wirh ECC 6.0 EnhPAck3 some changes happend generally in the area of DG classification.
E.g. Dynamic dangerous goods classification. I am not sure if these changes are "included" in some sense in the EH&S data download.
With best regards
C.B.
PS: please check this link on the top:
http://help.sap.com/erp2005_ehp_05/helpdata/en/c1/eda0f591ec12408b25e7a1b369ca45/frameset.htm
Refer to "Table Assignment: Specifications"
I believe packaging requirement is part of table EST0B but this is part of the download file.
Edited by: Christoph Bergemann on Aug 27, 2011 7:12 PM
Edited by: Christoph Bergemann on Aug 27, 2011 7:13 PM -
Uncaught exception when executing web dynpro application
Hello all,
I'm getting run time error exception CX_WDR_RR_EXCEPTION not caught when running web dynpro application
The error analysis shows the custom component is locked by the user and cannot be regenerated. But I checked in SM12 for locked entries and component was not listed there.
The program terminated in the include LWDR_RUNTIME_REPOSITORYF12
Please suggest how to resolve the isse?
Regards,
anilDear Anil,
What type of WD is it ?
Do you get the error when you trigger some sort of event ?
Is it when first launch the WD ?
Can you be more specific and share with us the code where this is dumping ?
You can also check this link
[CX_WDR_RT_EXCEPTION' - How to catch it?;
Kind Regards
/Ricardo Quintas -
Errors when processing web service call
Hello Experts,
Based on a requirement, I got a URL based on WSDL, using which I created a Consumer Proxy in SAP.
I created a Logical Port in SOA Manager with type selected as 'WSDL'.
When I'm trying to execute the proxy class to call the webservice using the logical port through SE80 it is throwing an error log as stated below.
1) SOAP:14 Unexpected element -el=definitions ns=http://schemas.xmlsoap.org/wsdl/
2)Error when processing Web service call
3)Error when calling SOAP Runtime functions: Unexpected element -el=definitions ns=http://schemas.xmlsoap.org/wsdl/
Kindly help me out.
Thanks,
VamshiHi,
Check Anton's reply in this thread: External WS Consumption Issue
Also refer the below doc which may help you: Consume an External Web Service in a Nutshell with Good Old ABAP
Calling WebServices from ABAP via HTTPS
Regards,
Kiran
Maybe you are looking for
-
New iPod Touch 4th gen. cannot connect to home wi-fi network
When I launch wi-fi on my new iPod Touch 4th gen. my home network's name is displayed, but after entering my password the iPod is unable to connect - the wheel to the left of the network name just keeps spinning. The network still functions properl
-
HP Photosmart C4580 All-In-One Mac OSX 10.5
My printer no longer works as a printer, it will copy and scan but will not print. I rebooted several times both printer and computer, no change. Then I deleted the printer and added it back, and no success, the printer is gone. I used the CD to rein
-
I want to format my C drive. If I run recovery from the partitioned D drive will this be accomplished. Thanks
-
Problem : Instance info corrupt in SAPMMC after installing the license
I have successfully installed the NW WAS 2004s preview edition and got the 3 month license key. However after installing the license, when I went to SAPMMC to re-start the system, the SAP Instace information seems to be messed up. Before installing t
-
Quota is displayed twice in 2006 for the same date
When iam entering Leave Quota Through PA30 , PA61 ,PT_QTA00 for a particular Employee it will display the Quota Twice Is there any way we can stop this ? is there any way we can Put cap that double Entry for the same date ? Quota is deducting Normall