Sources for Solaris Management Console, admintool, Process Manager

Hello again after a long time! I'm interested in this sources (Solaris Management Console, admintool, Process Manager) especially admintool source code. I'm working on a Solaris8_x86. Are this sources delivered with the operating system and where can I find'em? If this sources are not delivered with the OS, the question remains. Where can I find'em and some help (man pages or anything) about these programs and their source code?

Hi,
as I know, there aren't any sources available for admintool. If you are interested in Management Console, than check docs.sun.com.
Management Console is based on Jiro Technology as I remember. You can also check for CIM (Common Information Model) and WBEM (Web Based Enterprise Management).
Start with the Management Console Manuals.
Heiko

Similar Messages

Manually Installed Agent is not showing up in the Operations Manager Console Under Pending Management.

Hi Community,
I submitted this question because I'm a bit stuck with SCOM 2012 R2, I'll try to explain briefly what is happening right now in my environment, we have a DEV SCOM Deployment in which all the roles are installed in a single server, this servers is a
VMware machine running Windows Server 2008R2.
The Initial installation of the SCOM Operations Manager and all the other components was not performed by me but by a co-worker, unfortunately he doesn't remember much about the initial configuration. So i had to pickup where he left things about a year
ago, neither of us are SCOM experts, and we have almost no previous experience with previous versions of this application.
Now the problem that I'm facing is the following, all the DEV Servers are Domain Controllers and one of the indication within the "Guide for System Center Management Pack for Active Directory for Operations Manager 2012" states the following
Configuration
Supported?
Agent-less monitoring
No
After my first review I notice that our servers were being monitor by agent-less mode and given the above statement from the Operations Guide the only way that we could ever get those domain controllers monitor by SCOM would be by installing the agent on
each server, so I read somewhere (Can't remember where) that in order to install the agents in all the servers I should first remove them from the Agent-less node, which I did. Then I tried to use the discovery wizard to get the agent install in all of them
but it didn't matter how many times I try the servers never show up.
I read in a Tech Net Article that you had to modify the security settings so SCOM would let me decide if I wanted to approve it or not.
--> http://technet.microsoft.com/en-us/library/hh212853.aspx
I performed the suggested steps from the article but still the servers were not showing up, not even if I run the Discovery wizard, so I decided to go and perform the installation manually in a couple of servers I was able to install the agent in one of
the Domain Controllers, I configured the agent to use a service account that has Domain Admin rights. An hour after I installed the agent I went back to the Operations Console Manager and I check under Pending Action but the Server was not showing up. So i
went back to the Internet to try to find out if someone else had experience the same problem, and in one website some mentioned that if the servers were not showing up it was probably because they were still register in the SCOM Database, now I have no idea
of how i can check that or How can i remove them from there to have them available again, but what troubles me the most is that even after i installed the agent manually the server were not being recognize.
I went to the Event Viewer and I found one particular event that caught my attention, see below :
Log Name:      Operations Manager
Source:        Health Service Modules
Date:          6/12/2014 12:48:19 PM
Event ID:      11551
Task Category: None
Level:         Error
Keywords:      Classic
User:          N/A
Computer:      MyManagementServer
Description:
Computer verification failure for Machine Name: MyManagementServe is 0x800706BA. The RPC server is unavailable.
Event Xml:
<Event xmlns="http://schemas.microsoft.com/win/2004/08/events/event">
<System>
    <Provider Name="Health Service Modules" />
    <EventID Qualifiers="49152">11551</EventID>
    <Level>2</Level>
    <Task>0</Task>
    <Keywords>0x80000000000000</Keywords>
    <TimeCreated SystemTime="2014-06-12T16:48:19.000000000Z" />
    <EventRecordID>1945680</EventRecordID>
    <Channel>Operations Manager</Channel>
    <Computer>MyManagementServer</Computer>
    <Security />
</System>
<EventData>
    <Data>MyManagementServe</Data>
    <Data>0x800706BA</Data>
    <Data>The RPC server is unavailable.</Data>
</EventData>
</Event>
Not sure if this is related to the problem that I'm facing right now, but , I make sure that the RPC Services were running and also the related dependencies too. There's no Firewall enable in any of the servers and DNS seems to be working properly.
Ports 135 / 5723 are open and listening so since I ran out of ideas, I would like to know if some of the experts in this field could perhaps give me some guidelines.
There's one caveat that I haven't mention yet and that is related to SQL, I checked and my user just has read access to SQL i'm not sure if that could affect this but i think is worth mentioning.
My main goal is to have all the servers showing up in the Operations Manager Console.
So thanks all in advance !
Oscar Loria

So you can ping and nslookup from your ms to these agents and vice versa right? I wouldn't do a manual install, I would push the agent from the management server. You can uninstall the agent manually, or use cleanmom to get rid of them. Then
do an install from the console. When you initiate the install from the console (management server), should it run into any issues it will dump out an error which will give you an idea of where the problem may be.
From Holmans post on this:
e MOM Server could not execute WMI Query "Select * from Win32_OperatingSystem" on
computer “servername.domain.com”
Operation: Agent Install
Install account: DOMAIN\account
Error Code: 800706BA
Error Description: The RPC server is unavailable.
The MOM Server could not execute WMI Query "(null)” on
computer “servername.domain.com”
Operation: Agent Install
Install account: DOMAIN\account
Error Code: 800706BA
Error Description: The RPC server is unavailable.
8004100A
800706BA
1. Ensure agent push account has local admin rights
2. Firewall is blocking NetBIOS access. If Windows 2008 firewall is enabled, ensure “Remote Administration (RPC)” rule is enabled/allowed. We need port 135 (RPC) and the DCOM port range opened for console push through a firewall.
3. Inspect WMI service, health, and rebuild repository if necessary
4. Firewall is blocking ICMP (Live OneCare)
5. DNS incorrect
http://blogs.technet.com/b/kevinholman/archive/2009/01/27/console-based-agent-deployment-troubleshooting-table.aspx
Regards, Blake Email: mengotto<at>hotmail.com Blog: http://discussitnow.wordpress.com/ If my response was helpful, please mark it as so, if it answered your question, then please also mark it accordingly. Thank you.

SAP Management Console - Remote System Management

When I fire up my SAP Management Console (mmc plugin), I can see my locally installed instance for starting and stopping. Can I use the plugin to manage a remote machine?
Thanks!

This machine isn't running R/3, it is only running the Java application server. There is no System > Status which I can find.
When I open the SAPMMC on my local machine, it has the tree:
    Console Root
     SAP Systems
      J2E
       bknitter-dt
       bknitter-dt 1
       bknitter-dt 0
I'm assuming in my case, if someone were to manage this remotely, they would simply put in "bknitter-dt 00" and "bknitter-dt 01" ??
Thanks for the confirmation!
Message was edited by: Brandon Knitter

What is the best source for a novice to learn photo management?

As an X brand X user I don't find "photos" intuitive. I have photos from my iPhone4s, iPad 2, a digital camera, and downloaded from different sources. These 500 or so photos are stored on my iPhone 4s, my iPad, my MacBook Air and in iCloud. Everything is connected and synced by iCloud, Bluetooth, and sometimes even by good old fashioned wire. I now have two or more duplicates of some pictures on one or more of the devices most of the time, I think. The icing on the big messy cake is when I try to show a photo and can't find it.
I think my problem has become so compounded that no one manual will explain what I've created or how to untangle it.
Anyone?

if you're displaying video in flash, you should use flv or f4v files.

No Solaris Management Console server was available

I just installed solaris 8/07 fully patched the OS using smpatch went to use smc and get No Solaris Management Console server was available error.
# netstat -a | grep 898
localhost.898 *.* 0 0 49152 0 LISTEN
fmri svc:/application/management/wbem:default
name SMC and WBEM Server
enabled true
state online
next_state none
state_time Sat Jan 31 21:01:59 2009
logfile /var/svc/log/application-management-wbem:default.log
restarter svc:/system/svc/restarter:default
contract_id 102
dependency require_all/error svc:/milestone/sysconfig:default (online)
log::
[ Jan 31 21:01:57 Stopping because all processes in service exited. ]
[ Jan 31 21:01:57 Executing stop method ("/lib/svc/method/svc-wbem stop") ]
[ Jan 31 21:01:59 Method "stop" exited with status 0 ]
[ Jan 31 21:01:59 Executing start method ("/lib/svc/method/svc-wbem start") ]
[ Jan 31 21:01:59 Method "start" exited with status 0 ]
I have even uninstalled all packages related to smc reboot, and then reinstalled them from the dvd reboot.
Still won't load so I patched back up.
Any idea?
Thanks
Admin please move or delete this post I have tried and can't find an option to delete.
I'm really sorry I put this in the wrong forum. Center not Console.
Edited by: mark42324 on Jan 31, 2009 6:22 PM

Regarding SMC (not SunMC)..
Note: SMC = Solaris Management Console
SunMC = Sun Management Center (topic of this forum)
Patch 121308-16+ makes WBEM "secure by default."
Customers running Solaris 10 6/06 or prior must modify the client's WBEM
configuration file to allow remote connections after installing patch 121308.
1. Modify the following line in /usr/sadm/lib/smc/policy/smcserver.config:
FROM:
remote.connections=false
TO:
remote.connections=true
2. Stop and restart wbem.
# /etc/init.d/init.wbem stop
# /etc/init.d/init.wbem start
3. Verify that WBEM is now listening for connections to port 898
on all interfaces:
# netstat -an |grep 898
*.898 *.* 0 0 49152 0 LISTEN
In Solaris [TM]10 update 3 (11/06), the startup mechanism for WBEM was changed
from the legacy (rc script) method to the new Service Management Facility (SMF).
To allow remote WBEM connections on Solaris 10 update 3 or later:
# svcadm disable wbem
# svccfg -s wbem setprop options/tcp_listen=true
# svcadm enable wbem

How to install Oracle BPEL Process Manager for OracleAS Middle Tier

hi,
i need to install BPEL process manager, so i download the following file from otn
1.soa_windows_x86_101310_disk1
2.soa_windows_x86_bpel_101310
here i read the document named b28980.pdf from bpel\doc\pc.1012 to install BPEL PM
so i start to complete the pre-installation task
1.installed Oracle database 10g
2.Run the Integration Repository Creation Assistant on the Database
3.Install Oracle Application Server 10g Release3 (10.1.3.1.0) and select either the J2EE Server installation type or the J2EE and Web Server installation type. selected J2EE and Web Server installation type
and installed according to the Oracle application server installation guide.
installed OracleAS in the path : D:\product\10.1.3.1\OracleAS_1
4.Install the current release of Oracle BPEL Process Manager for OracleAS Middle Tier
here they mention to select the J2EE and Web Server installation type because that type is selected in Oracle AS installed in Oracle Application Server
so i start to install the BPEL PM by selecting the setup.exe-->and shows the location source and destination
default destination is : D:\product\10.1.3.1\OraBPEL_1 selected next on the screen
the next screen is select installation type here there are two types named
1.BPEL process Manager for Developer (371MB)
2.BPEL process manager for Oracle AS Middle tier (107MB)
i selected 2.BPEL process manager for Oracle AS Middle tier (107MB) and click next
pop up window opens with title dependencies
error:
BPEL Process manager for oracle AS Middle tier will run on top of a supported Oracle Application Server 10.1.3.1.0 J2EE server and Web Server Or J2EE server instance. this location does not contain this instance. Please select new Oracle home that contains a supported instance.
so i changed the destination path to : D:\product\10.1.3.1\OracleAS_1\BIN then also i got the same error.
please any one mention the path for J2EE and Web Server instance for installing the BPEL PM for Oracle AS Middle Tier.
Thanks in Advance
Aswath Thaniga

If you choose the developer version you will be fine.
If you have installed J2EE and Web Server installation into D:\product\10.1.3.1\OracleAS_1 then this is the location you install your BPEL PM into, not D:\product\10.1.3.1\OraBPEL_1 or D:\product\10.1.3.1\OracleAS_1\BIN.
D:\product\10.1.3.1\OracleAS_1 is what we call the ORACLE_HOME, generally we create a new home for each install, but in this case there is a dependency on 10.1.3.1 OC4J container. So it needs to be installed into 10.1.3.1 oracle home.
The bin directory is just the executables for that home, its not the actual. home.
cheers
James

No Solaris Management Console was available on the specific server

Hi all,
We had just finish setting up a new Solaris 10 environment. When i launch smc on the server, on selecting toolbox there's an error message:
No Solaris Management Console server was available on the specified server. Please ensure there is a Solaris Management Console server available on the specified host and that it is running.
However, upon verifying whether smc is running:
./init.wbem status
Solaris Management Console server version 2.1.0 running on port 898.
Not sure why this error message appeared, thanks.

Regarding SMC (not SunMC)..
Note: SMC = Solaris Management Console
SunMC = Sun Management Center (topic of this forum)
Patch 121308-16+ makes WBEM "secure by default."
Customers running Solaris 10 6/06 or prior must modify the client's WBEM
configuration file to allow remote connections after installing patch 121308.
1. Modify the following line in /usr/sadm/lib/smc/policy/smcserver.config:
FROM:
remote.connections=false
TO:
remote.connections=true
2. Stop and restart wbem.
# /etc/init.d/init.wbem stop
# /etc/init.d/init.wbem start
3. Verify that WBEM is now listening for connections to port 898
on all interfaces:
# netstat -an |grep 898
*.898 *.* 0 0 49152 0 LISTEN
In Solaris [TM]10 update 3 (11/06), the startup mechanism for WBEM was changed
from the legacy (rc script) method to the new Service Management Facility (SMF).
To allow remote WBEM connections on Solaris 10 update 3 or later:
# svcadm disable wbem
# svccfg -s wbem setprop options/tcp_listen=true
# svcadm enable wbem

Managing LDAP users with Solaris Management Console

I'm using Solaris Management Console (SMC) to manage users in our Directory Server. Unfortunately, the default "user manager" in SMC does not have a tab to manage netgroups. Does anybody else use SMC to manage users and have you created a custom tool to manage netgroups? If so, how did you do it?

Hello Senthilkumar,
Here are the outputs from the commands. The other ones that I left out (/var/adm/messages and showrev -p) had a lot of output and I wasn't sure what you needed. Please let me know what to post or if you want me to post the whole things.
# more /etc/release
Solaris 8 7/01 s28x_u5wos_08 INTEL
Copyright 2001 Sun Microsystems, Inc. All Rights Reserved.
Assembled 06 June 2001
# java -version
java version "1.2.2"
Solaris VM (build Solaris_JDK_1.2.2_07a, native threads, sunwjit)
Here are the errors that come back when /etc/init.d/init.wbem fails.
Exception in thread "main" java.lang.NoClassDefFoundError: com/sun/management/viperimpl/server/ViperServer
at java.lang.ClassLoader.defineClass0(Native Method)
at java.lang.ClassLoader.defineClass(ClassLoader.java:495)
at java.security.SecureClassLoader.defineClass(SecureClassLoader.java:110)
at java.net.URLClassLoader.defineClass(URLClassLoader.java:252)
at java.net.URLClassLoader.access$1(URLClassLoader.java:218)
at java.net.URLClassLoader$1.run(URLClassLoader.java:199)
at java.security.AccessController.doPrivileged(Native Method)
at java.net.URLClassLoader.findClass(URLClassLoader.java:193)
at java.lang.ClassLoader.loadClass(ClassLoader.java:300)
at sun.misc.Launcher$AppClassLoader.loadClass(Launcher.java:290)
at java.lang.ClassLoader.loadClass(ClassLoader.java:256)
at java.lang.ClassLoader.loadClassInternal(ClassLoader.java:316)

Does OAS Enterprise manager console install when Oracle DB EM installed?

I installed Oracle database 10gR2 on my development machine. After that I installed Oracle Application Server 10g 10.1.3.1.0
Although I opted to install the EM component I don't think that it did install.
Here is the install readme found in OAS_HOME\install\readme.txt:
The installation of Oracle Application Server 10g 10.1.3.1.0 was successful.
These instructions are located in C:\OracleAS_1\install\readme.txt for your future reference.
You can view the status of the server with the following command:
C:\OracleAS_1\opmn\bin\opmnctl status
Access the Welcome Page with the following URL:
http://main:80/
Application Server Control Console is not running in this instance of Oracle Application Server. You can manage this instance remotely through another instance of Oracle Application Server that is configured to run Application Server Control Console.
Installation Details:
Installation Directory: C:\OracleAS_1
Installation Type: J2EE Server and Web Server
Installed Components: Oracle HTTP Server, Oracle Containers for J2EE (OC4J), and Oracle Process Manager & Notification Server (OPMN)
Instance Name: orcl.main
Administrator Username: oc4jadminIn the case of the database and the application server being on the same machine, should I be able to access two different EM consoles? If so then why can't I seem to access the OAS EM console (I can access the database EM).

Problem discussed and solved here:
Re: Not allow em console

Eclipse BPEL Designer with Oracle BPEL Process Manager

Gurus,
I am tryting to develop a BPEL 2 process using Eclipse Helios BPEL Designer (v0.5).
Request your help with a problem that I am facing, which is as follows:
I am trying to create a Partner Link (PL) in my BPEL process, using the Partner Link Type (PLT) provided by TaskService (for user interactions) in BPEL Process Manager 11g integration services.
However, the PLT is not recognized by Eclipse BPEL Designer. The Port Types in the WSDL show up but not the PLTs.
I noticed that the PLT namespace being used in the TaskService WSDL is BPEL v1 namespace (namely, http://schemas.xmlsoap.org/ws/2003/05/partner-link/). I am able to work with PLTs from WSDLs with BPEL v2 namespce (namely, http://docs.oasis-open.org/wsbpel/2.0/plnktype)
Is there anyway I can work with v1 PLTs using Eclipse BPEL 2 Process?
Many Thanks,
Pulkit Sharma

Hi,
I believe the Eclipse BPEL Designer is not a supported tool to create SOA composites. I suggest using Oracle JDeveloper 11g as it is a supported tool for development and is Oracle's go-forward IDE strategy.
Hope this helps!

Predefined process management templates

Does BPEL Process Manager provide predefined process management templates ? if so, please describe the details of customization capabilities for similar (but not identical) lines of business
Thanks in advance

Could you pls elaborate a little bit on the usecase? which enviroment, eclipse?
thx clemens

Installation of Management Console fails

I'm trying to install the OpsMgr Management Console on our management server, but it fails:
Windows Installer installed the product. Product Name: System Center Operations Manager 2012 Console. Product Version: 7.1.10226.0. Product Language: 1033. Manufacturer: Microsoft Corporation. Installation success or error status: 1603.
All requirements, as stated
here, are there. So I reboot the server and executed msiexec directly:
msiexec /i Z:\Setup\AMD64\Console\OMConsole.msi OM_INSTALLDIR="
C:\Program Files\Microsoft System Center 2012 R2\Operations Manager" SEND_CEIP_R
EPORTS=0 MU_SETTING=0 /l*v c:\temp\msi.log
When I open the verbose log I get some more detail but I still don't understand what is happening:
Calling custom action CAManaged!Microsoft.MOMv3.Setup.MOMv3ManagedCAs.AddFullTrustForAssembly
Exception thrown by custom action:
System.Reflection.TargetInvocationException: Exception has been thrown by the target of an invocation. ---> System.NotSupportedException: This method explicitly uses CAS policy, which has been obsoleted by the .NET Framework. In order to enable CAS policy for compatibility reasons, please use the NetFx40_LegacySecurityPolicy configuration switch. Please see http://go.microsoft.com/fwlink/?LinkID=155570 for more information.
at System.Security.SecurityManager.PolicyHierarchy()
at Microsoft.MOMv3.Setup.MOMv3ManagedCAs.GetPolicyLevel(String policyLevelName)
at Microsoft.MOMv3.Setup.MOMv3ManagedCAs.AddFullTrustForAssembly(Session session)
--- End of inner exception stack trace ---
at System.RuntimeMethodHandle.InvokeMethod(Object target, Object arguments, Signature sig, Boolean constructor)
at System.Reflection.RuntimeMethodInfo.UnsafeInvokeInternal(Object obj, Object parameters, Object arguments)
at System.Reflection.RuntimeMethodInfo.Invoke(Object obj, BindingFlags invokeAttr, Binder binder, Object parameters, CultureInfo culture)
at Microsoft.WindowsInstaller.CustomActionProxy.InvokeCustomAction(Int32 sessionHandle, String entryPoint)
CustomAction _AddCodeGroup.6C283D0A_50A8_439C_BDF9_0BA55C19F3FE returned actual error code 1603 (note this may not be 100% accurate if translation happened inside sandbox)
MSI (s) (98:A4) [08:01:43:402]: NOTE: custom action _AddCodeGroup.6C283D0A_50A8_439C_BDF9_0BA55C19F3FE unexpectedly closed the hInstall handle (type MSIHANDLE) provided to it. The custom action should be fixed to not close that handle.
Action ended 8:01:43: InstallFinalize. Return value 3.
What is going on and why is the installation failing?

I suggest uninstalling both .Net frameworks (3.5 & 4.5), reboot server and then install them back, if not 4.5, try installing 4.0 and try installing SCOM, hopefully this should work
Else, as per your exception there seems some problem with CAS policy which was obsoleted by the .Net framework
Exception has been thrown by the target of an invocation. ---> System.NotSupportedException:
This method explicitly uses CAS policy, which has been obsoleted by the .NET Framework. In order to enable CAS policy for compatibility reasons, please use the NetFx40_LegacySecurityPolicy configuration switch
plz refer below links and do let us know if this helped
http://services.businessanalyze.com/community/node/169
http://msdn.microsoft.com/en-us/library/ee191568(VS.100).aspx
Faizan

HFM Process Management

Hi,
in HFM, we use the submission group and submission phases to manage the phased process management. I have one questions regarding this submission group/submission phase.
For example, I have accounts dimension members revenue, and balance sheet, and also C1 for products, P1, P2, P3.
In HFM, can I have the submission phased by accounts AND c1.
For example, I would like to have revenue->P1 to be in the phase 1, balance sheet in Phase 2, revenue->P2 in phase 3. The normal setup, is that I can give revenue: submission group 1, and balance sheet: sub group 2, and then P1 : sub group 1, and P2: sub group 3. In this setup, since revenue is already sub grp1, I can not have one sub group assigned to different sub phases. It seems that I can not do the phased submission as I wished.
Am I right? Any workaround or suggestion/advices? Thanks in advance

Raul,
I think that maybe I do not state my problem clearly.
Yes. I already enable the metadata for phase submission, including accounts dimension, and C1 to C4 dimensions.
However, if I would like to have different submission phases for same account, but different C1 dimension member. How can I assign the submission group to same account member, but different C1 dimension members to achieve the different submission phase?
Since one account member can only have one submission group, and each C1 member has different submission group as well. In this case, when I assign the submission group to different phases, I can not have same submission group in two different phases. Then I can not do achieve the submission phase, for example, sales for Product 1 in Phase 2, and sales for Product 2 in Phase 5, etc.
Any other suggestions?
Thanks

The deployment process seems to die or get stuck, iAS 6 SP3 for Solaris 8?

When I deploy my application in iAS 6 SP3 for Solaris 8 the deployment process seems to die or get stuck. In the shell window i get the messages
iasdeploy for iPlanet Application Server 6.0 SP3
Connected to LDAP server on sstu15.auto.com port 389
iPlanet Application Server is running in international mode
sstu15:null
sstu15:10 kas> deployment action ''J2EEInstallEar'' (/u02/home/iplanet/JAR/SSS.ear) running.
sstu15:10 kas> deployment action ''J2EEInstallEar'' (/u02/home/iplanet/JAR/SSS.ear) running.
After this nothing happens for a really long time.
When starting the deployment I get in the beginning of kas.log two entries
ADMIN-168: kas> deployment get log ''J2EEInstallEar''
GDS-007: finished a registry load
but suddenly the second line disappears and the only message I get is the first entry. I need to break the deployment process and kill the processes manually.
When starting the application server I get two error messages:
Connected to LDAP server on sstu15.auto.com port 389
iPlanet Application Server is running in international mode
Connected to LDAP server on sstu15.auto.com port 389
iPlanet Application Server is running in international mode
iPlanet Administrative Server
Version 6.0 SP3, Build 20010704
Copyright (c) 1996-1997 KIVA Software Corporation.
Copyright (c) 1998-1999 Netscape Communications Corporation.
Copyright (c) 2000-2001 Sun Microsystems, Inc. Some preexisting portions Copyright (c) 2000 Netscape Communications Corp
. All rights reserved.
Use of this software is governed by the terms of the executed license agreement between you and iPlanet E-Commerce Solutions.
[14/Feb/2002 11:02:12:7] error: ADMIN-071: kas> error: failed to either start up or connect to engine ''0'' (CCS0)
[14/Feb/2002 11:03:08:8] error: ADMIN-071: kas> error: failed to either start up or connect to engine ''1'' (CCS0)
I think all processes starts OK, I get one for .kas and one for kas, one for .kxs and one for kxs and finally one for .kjs and one for kjs.
Is someone familiar with this/these problem(s)?

It seems you are deploying a very big application. Try to deploy this application with following command
j2eeappreg <filename>
It should work fine. It was a bug with iasdeploy command in iAS SP3 which had been fixed in iAS SP4.

Is there any version of Oracle BPEL Process Manager 10.1.2.0.2 for Solaris

Hi
Thank you for reading my post
Is there any version of Oracle BPEL Process Manager 10.1.2.0.2 for Solaris X86 available or under development?
Does any one tried the sparc version on x86?
Thanks

I looked there and it say there is only SPARC architecture available.
I want to ask whether any one tried to install the sparc version on X86 or not as it is java and should run everywhere.
Thanks.

Sources for Solaris Management Console, admintool, Process Manager

Similar Messages

Maybe you are looking for