Sources of Monitor Activity

Under:
Home>HTML DB Workspace Administration>Monitor Activity>Page Views by Day
we find
Month View - Usage Report - Usage Chart - Usage Report, by Hour - Usage Chart, by Hour
I am espceially interested in the sources of the "Usage Chart" (line chart showing number of users per day).
Can the APEX team provide for these sources ? (and the others)
Wud be of a great help !
TIA
Bernhard

Under
Home>Administration>Monitor Activity>Page Views by User
or
Home>Administration>Monitor Activity>Application Changes by Application
I am espceially interested in the sources of the report with data and percentage bar (Chart showing the percentage) in the report itself
I tried to login to workspace vikasa, userid guest and password guest.
But it says no credentials.
Can anybody help me with complete example of using report data and percentage bar in the report itself.
Can the APEX team provide for these sources ? (and the others)
Would be of a great help !
Thanks.

Similar Messages

Premiere CC 2014.2 won't play source/program monitor

I recently installed Adobe Premiere CC 2014.2, and since then no video plays within it, or the source and monitor or the program monitor. I'm on a Dell Inspiron notebook 2.1gh i7, 8GB memory, Intel HD Graphics 4000, ATI Radeon HD 7700m. Was usually working with the previous version, but now despite render normally, he does not play in the Premiere.

>Intel HD Graphics 4000, ATI Radeon HD 7700m
Dual adapters can cause serious problems
-http://helpx.adobe.com/premiere-pro/kb/error---preludevideo-play-modules.html
-http://forums.adobe.com/thread/1001579
-Use BIOS http://forums.adobe.com/thread/1019004?tstart=0
-link to why http://forums.adobe.com/message/4685328
-http://www.anandtech.com/show/4839/mobile-gpu-faceoff-amd-dynamic-switchable-graphics-vs-n vidia-optimus-technology/2

Data source is not activated!!!!

Hi Friends,
Currently we are workig on BI 7.0 version and trying to upload flat file data. We have created Datasource for Flatfile source system and activated ( 100% sure about activation). But when we trying to give selections for the Fields in the infopackage screen it was saying the above said Datasource is not in Active version ( Even thoug that was activated properly).
We are wondering about this in the data souce tree it was cleary showing as activated , but in the infopackage it was stating that is not activated.
Please look into this one and give your valuable suggestions.
Thanks in advance...

Solved by own

ALE Change Pointers in source system not active

Hi All,
I am trying to load 0COSTELMNT using deltas. The initial load is OK and then i use a delta and it fails and i get the error:
"ALE Change Pointers in source system not active"
I have carried out the following steps in an attempt to resolve the problem - but it didnt. Anyone have any advice??
(1) Checked BD61 to confirm whether the change pointers are active
(2) Checked BDCP to confirm the number range is maintained
(3) Checked SALE (Activate change pointers for message types) to confirm whether the change pointer has been activated for the type we need:
COCOKA Control segment CO object/cost element
COELEM Cost element master data
(4) In transaction snum, Selected number ranges and confirmed the intervals are setup
No. 01
FROM: 0000000001
TO: 0000009999
(5) Activate transfer structure
(6) Replicate Datasources
Thanks,

If you are transferring master data from source system, the BD61 setting on the source system should be checked.
Why it has been unchecked - not sure (likely someone did it by mistake).
It shouldn't have any effect on txnl delta. What will be effected though is that you will have lost delta of the ALE based data sources for the period this setting was unchecked.

Question to assigning Source System for Activation

We want to assign source system for activation, before business content-InfoObject catalog activation. The steps as follows:
1.On the Data Warehousing Workbench: Business Content view from the menu choose Edit  Source System Assignment.->This step is ok, no question.
2. In the Choose source system by default? dialog box select the checkbox in the column Default assignment in the row containing the source systems you need to load data from.->Now we can see BI system as default call DEGCLNT500 displayed, in my case we only connect one R/3 system call DHHCLNT100 to BI system.
So, the question to that is shoud we select both R/3 source system and BW source system as default or just select R/3 source system as default and dis-select BW source system?
Which one should we choose, both or only R/3 source system?
Pls help, thanks!

Hi hi ni,
If what you are activating it's going to retrieve data only from R/3, then select R/3 and uncheck BW.
You can change this whenever you want, if in the future you need bw, before activating, you can change it.
This doesn't means where is going to get the data from, this is just to look for active (and replicated) datasources to connect to the business content you are activating.
Hope this helps.
Regards,
Diego

Source system not Active error while installing BI content cube

Hi.,
When I try to install the BI content cube, In logs it is showing the error message as "Source client not Active". I activated the source system in modelling tab. Still the problem continues. In source system assignment of BI content the source client is also checked. Please give me a solution.

Hi Selva,
If you want to select only infocube, select "Only necessary objects" in grouping. If you want everything related to Info cube, then system will collect data source also and for that it will check if you are authorized in source system. Please check if the source system is connected to BI or you can do one thing activate the data source in source system and replicate it in BI.
Regards,
Kams

"Source is not Active" when creating DTP from Datasource (BI. 7.0)

Hello,
I need to load data to ODS from a ZTable. Version 7.0
This is what i have done so far:
- Created a ZTABLE. (OK)
- Loaded data via function modules through excel macros. (OK)
- Created DataSource(ZGDRDS01) from a ZTABLE in RSO2. (I guess OK)
- Create DataTransfer Process - (NOK)
       Source of DTP
         Object Type : DataSource
         DataSource : ZGDRDS01
         Source System: BWD
    - Error Message: Source ZGDRDS01 of BWD(type DTASRC) is not active (like if it didnt exists)
(I didnt find any Activate button in RSO2)
Somebody else did something similar before and created its own DataSource, that one I can use, but i need to create my own.

Thank you for your fasts answers! That seemed to be part of the problem.
Did you create Transformation which is a prereq for creating a DTP ?
- No i didnt create the transformation first, but the problem was the same. When I created a Transformation it asks me for the DataSource and back again to "source is not Active".
New problem:
I went to SourceSystem and replicated the datasources,
- Know it appears just below the other one that was previously working.
- However it appears with status Inactive and there is no Activate Button.
- Something went wrong with the version because the column "M = A Version" appears =/=, for my new Datasource. I right click on it -> Replicate Metadata but didnt help. Any other option marks me something lik is not Active or
   "The DataSource ZGDRDS01 (BWD) does not exists in object version A"
if i right clic -> Display
Version = Modified (yellow)
I deleted the datasource and generated it again with the same result.
¿do you know how to fix this?
P.S ¿Should I post a new thread for this problem?

Monitor Activity - Active Sessions : Not displaying all sessions

I'm encountering an issue whereby the active sessions are not being listed in the Monitor Activity -> Active Sessions screen.
However, the number of Active Sessions is being displayed.
Any ideas?

Hi Dave,
I think there's some confusion here. The select list right after the label Display is for you to select the maximum number of rows you want to display on the report. The actual number of sessions in the report will be shown below.
I did this just now on apex.oracle.com. I chose a value of 15 (the default) for Display. And at the split second that I clicked Go, there were only 4 active database sessions - and the pagination label at the bottom of the report was "1 - 4", which was correct.
I just think you're misinterpreting Display.
Joel

No mixer monitor activity.

Trying to record external electric bass. Audio interface monitor working, all settings correct, just no recording or mixer monitor activity. Created an audio track and preferences, audio have correct settings, system preferences correct, etc, volume on bass is up, just nothing in Logic shows that it exists. Using firewire.

Figured it out. Opened a new project and when I went back to original, everything has reset correctly.

Modify source code for Active-X viewer

Requirement:
Whenever an ActiveX viewer is selected, and a report link is clicked, the control goes to Url - CeVwr which is a servlet pointing to ReportSourceBridge.java residing in reportsourcebridge.jar. This class alongwith all other classes present in this jar pop up the parameter screen and process it to display report. Our requirement is to dynamically prepare this parameter screen, by localizing the strings - parameter prompts and their options - based on user's locale.
Reason for workaround:
BO does not provide any source code for Active-X viewer but they do for DHTML and Advanced DHTML viewer. So it was easy for us to implement our requirements in DHTML and AdvDHTML viewers but for Active-X viewer it is not the same story.
Workaround:
We identified a core class ParameterHTMLRenderResult.java present in rascore.jar, which is the one which genrates HTML for parameter prompt screen for all viewers, accept for the Java one. We extracted all parameters, their descriptions, their prompting options as well as current values and modified the html result to get a localised HTML result. We also passed user's locale in this class.
Question: Is the source code for Active-X viewer available? Is it okay for us to modify Active-X viewer?

Hi Chris,
We do not provide the activex viewer code and do not support modifying it or any of our other code.
Code for those two other viewers is available since they are html based viewers so that code is easily obtainable, but we do not support customers making changes to it.
Jason

Slight glitches in Source/Canvas monitor with CUDA MPE only

i7 3930k, Win 7 64-bit, EVGA GTX 570HD (2.5GB version). Everything is working correctly and stable (overall) . My one gripe is that when I toggle between CUDA MPE and software MPE, the software MPE is actually smoother in many cases. The CUDA is obviously working, but I get almost a slight shimmer running up the video (not tearing) , nothing terrible but certainly annoying. Its always about half way up the video where the shimmer starts and goes up to the top and disappears. Skipping through the video one frame at a time reveals nothing, its not in the source video, this has to do with decoding or aliasing.
It happens also at 100% pixel for pixel monitoring , I wanted to see if it was an aliasing issue, but the situation still occurs. Software MPE playback does not exhibit this glitch, so I've narrowed it down. The main question is are there NVIDIA settings in the control panel that may be not quite right? I've tried the defaults, and tweaked some of the settings, but there are a lot of options and I'm not sure which might effect the playback.
Seems to happen the most with H.264 canon files and some ProRes stuff I've imported, but then again turning off the CUDA MPE makes the problem go away....
Not a HDD or processor issue, those I've checked for certain.
I am running the new 6.0.2, but it happened before as well.
Already made sure the cores weren't parking, and they are all active....
Does anyone have any ideas?
Thanks for any help !

Hey I've been working on this with a few different systems as to try to figure out what is going on. First I am working on a Mac Mini 2011 i7 Quad with the crappy Intel 3000 low end 512MB graphics , and software MPE with the same H264 and ProRes files look flawless. Same with another PC Win7/64 HP Probook laptop I have, again with no GPU acceleration.
Last week I picked up Adobe PP6 classroom in a book and may have stumbled upon something. Maybe not.
Anyway on page 39, there is a paragraph on Maximum bit depth and Render quality settings, as specified in the sequence settings tab.
"If you enable Maximum Render Quality or if you have GPU acceleration, Adobe Premiere Pro uses a more advanced system for scaling images smaller. Without this option, you may see artifacts or noise in the picture when making images smaller. Without GPU acceleration, this option will impact performance."
Hmmmm... So I only see the "isssue" with the GPU enabled, and neither of those Maximum bit depth or Render quality options enabled on my projects. Yet without the GPU acceleration (MPE software only) and these options also not enabled, everything is fine (on my Mac Mini, my HP ProBook, and my PC where I am seeing the issue). This jives with my experience, so I am going to check those two options Monday when I get back to the office and see if that doesn't solve the issue. As if the preview monitors when GPU accelerated, almost default to a "draft" mode of rescaling/alising, this is perhaps what I am seeing. Blazing performance at the expense of a little image quality.
The computer is so understressed during H.264 playback, I'm seeing like 8% CPU total resource usage, that I can surely afford to crank up the quality and not see any kind of dropped frames. In fact when I view the 1080p @ half resolution, I still see the slight shimmer. And this is off an OCZ Vertex 4 via SATA 6g where I'm reading 450MB/sec without breaking a sweat.

Source File shows White Screen in Source + Program Monitor

Hello,
I'm having an issue with only one of three media files in my Premiere Pro CS6 project.
When I try to preview this one video file in the Source Monitor, it shows only a white screen, and I can only move the playhead to the beginning and end of the file. I then plopped the clip into the sequence to see if rendering it would give me better luck in the Program Monitor, yet to no avail. The file supposedly successfully rendered, yet when I open the subsequently created "Preview" file in VLC, the entire clip is completely white for its entire duration. (I think it's interesting to note that VLC plays the source file correctly, and that this footage has been successfully used in a separate project in Final Cut after converted to ProRes with Compressor.)
I've opened the file with GSpot to make sure I had the Codec installed, yet GSpot doesn't list any Codec information for this file. It only lists Container information.
(Screen shot of GSpot with white-screen issue in the background)
My Video Card drivers are up to date, taken directly from the chipset's manufacturer's website.
Codec: (See post below for Media Info dump)
Premiere Pro version 6.0.3 (001 (MC: 264587)), installed in English.
Sequence Settings: DVCPROHD 1080i50 default settings (framerate changed to 50FPS)
Windows 7 x64 Service Pack 1, English, 1440x900 32bit Color
Pentium(R) Dual-Core CPU T4200 @ 2.00 GHz
2GB RAM
Mobile Intel(R) 4 Series Express Chipset Family, Driver version 8.15.10.2869
53.2GB of free space on the SSD all of the media files, the operating system, the Adobe Premiere installation, and scratch disk is located.
I'm unsure of the camera used to record this footage.
Thanks for reading my post, and let me know if you need any more information.

General
ID                                       : 255 (0xFF)
Complete name                            : C:\Video Workspace\Source Media\VSB 01 Stand Bühnenkamera VORNE.mpeg
Format                                   : MPEG-TS
Commercial name                          : HDV 1080i
File size                                : 11.4 GiB
Duration                                 : 1h 0mn
Start time                               : UTC 2011-10-16 17:36:49
End time                                 : UTC 2011-10-16 18:37:17
Overall bit rate mode                    : Constant
Overall bit rate                         : 27.0 Mbps
Maximum Overall bit rate                 : 33.0 Mbps
Encoded date                             : UTC 2011-10-16 17:36:49
Video
ID                                       : 2064 (0x810)
Menu ID                                  : 100 (0x64)
Format                                   : MPEG Video
Commercial name                          : HDV 1080i
Format version                           : Version 2
Format profile                           : Main@High 1440
Format settings, BVOP                    : Yes
Format settings, Matrix                  : Custom
Format settings, GOP                     : M=3, N=12
Codec ID                                 : 2
Duration                                 : 1h 0mn
Bit rate                                 : 25.3 Mbps
Maximum bit rate                         : 25.0 Mbps
Width                                    : 1 440 pixels
Height                                   : 1 080 pixels
Display aspect ratio                     : 16:9
Frame rate                               : 25.000 fps
Standard                                 : Component
Color space                              : YUV
Chroma subsampling                       : 4:2:0
Bit depth                                : 8 bits
Scan type                                : Interlaced
Scan order                               : Top Field First
Compression mode                         : Lossy
Bits/(Pixel*Frame)                       : 0.650
Stream size                              : 10.7 GiB (94%)
Color primaries                          : BT.709
Transfer characteristics                 : BT.709
Matrix coefficients                      : BT.709
Audio
ID                                       : 2068 (0x814)
Menu ID                                  : 100 (0x64)
Format                                   : MPEG Audio
Format version                           : Version 1
Format profile                           : Layer 2
Codec ID                                 : 3
Duration                                 : 1h 0mn
Bit rate mode                            : Constant
Bit rate                                 : 384 Kbps
Channel(s)                               : 2 channels
Sampling rate                            : 48.0 KHz
Compression mode                         : Lossy
Delay relative to video                  : -40ms
Stream size                              : 166 MiB (1%)
Menu
ID                                       : 129 (0x81)
Menu ID                                  : 100 (0x64)
List                                     : 2064 (0x810) (MPEG Video) / 2068 (0x814) (MPEG Audio) / 2069 (0x815) () / 2065 (0x811) ()

Bootcamp 2.0, Win XP 32bit and beamer / external monitor activation

Hi,
similar topics have been posted but I could not find any solution yet...
My system: MacBook (NOT Pro, Core2Duo, with 10.5 Leopard and Bootcamp 2.0 with Win XP Pro 32bit SP2) and Mini-DVI to DVI adapter.
Working on Leopard connecting my external monitor (Fujitsu-Siemens P19-2) is working perfectly. It is automatically detected and activated.
When I connect the monitor on Win XP, the desktop and tasbar flicker/are reloaded, i.e. ANYTHING is detected. However, the monitor is black and says "No signal" and i cannot activate it. I considered/tried:
- the Windows way: FN + F7 => did not work / is deactivated and tools like Input Remapper didnt work (written for Macbook Pro only afaik)
- the 2nd Windows way: Display Properties, Settings => any changes without effect
- via Bootcamp / GMA Driver Properties: no possibility to activate 2nd monitor: Note at "Display Devices"-menu: "Two displays must be connected to the computer before you can use this feature. Please connect another display."
Therefore my questions:
- any solution i did not consider?
- is it a bootcamp / driver issue to be solved in bootcamp updates?
- is there a keyboard tool similar to inputRemapper for Not-Pro-Macbooks? (To activate not only FN+F7 but also Del and PSC)
Thanks in advance...
Ben

Thing is, I am trying this too. However, the only option I get is to clone the display. This is not what I want, I want to use the TV as the primary display. This way games will startup on the big TV and not on my Macbook Pro. Now I don't get the option to use that TV as a primary display.
So leaves me with the option to clone the display and have same image rendered on both screens... This is NOT what i want. In Leopard everything works great... obviously...
PLease let me know if you got any solutions for this

Importing .asf files, blurry in source/sequence monitors and output

I have a large amount of material to work with in .asf form, 480x360 resolution. I'll be outputting to 480x360 as well, so no scaling/zooming needed at all. Problem is, when I import one of those asfs it immediately becomes blurry, i.e. in the source monitor even before I insert it into the sequence and do any modifications. Comparing the imported files to the originals there is a noticeable difference at the exact same dimensions.
I've made sure my sequence settings are at 480x360 resolution. Not sure where else to look on this, any suggestions?
In the past I've done a very similar workflow in PE with no problems, so I'm assuming (hoping??) that there's some easily changed option. Thanks in advance.

Have tried various other permutations in project setup and output - still no luck.
I'm wondering if a clue is the behavior of the program monitor - the clip displays clearly in it until I 'select' the video screen, at which point it blurs just like the output. If I click another area of the screen again, the image resharpens, and so forth. Anyone know what mechanism is causing that?

Source & Program Monitor

I shooted a stage program with two cameras. I am using CS5.5 to edit the videos. How can I see both cameras videos same time one in source monitor another in program monitor. If I use gang source and program monitor the I can see both videos in source monitor and program monitor by dragging but if I play I can see only the program monitor video then after pause the source monitor video jumps to the position. Is there any way to play both videos same time in source monitor and program monitor?

Here's information about the multi-cam editing that shooternz referred to.

Sources of Monitor Activity

Similar Messages

Maybe you are looking for