Sourcing from multiple supplier

Hello Guru,
We have one material that needs to be sourced from two suppliers. One in US and other is in Canada. Is there a way to order from these two different suppliers on a rotational basis? Is there a way to order from the US supplier every 3rd or 4th order and other times from Canada? If there is way, can you please give me the details steps to configure this. Can quota arrangement be used for this? Thanks so much.

Hi
Yes you can use quota arrangement for this.
Quota Arrangement
regards
Eduardo

Similar Messages

Material sourced from multiple plants

Hi all
I have a Plant A which sources material from Plant B, Plant C, and Plant D. We use STOs to transfer material from Plant B,C,D to Plant A. If I use a Special procurement key then I can only define one of the source plants. What is the solution for this?
Will Quota arrangement work?
thanks a lot

John,
Special procurement key is mainly useful for planning. It does not prevent you from sourcing from another plant, it only sets that one plant will be defaulted as a source.
So, you can set up STOs from all three plants. Set your SPK for the 'most likely' plant. If a planner wishes to override the MRP created Purchase reqs, he can do so by manually entering a new source plant in the Purchase req.
Now, if your intention is to have MRP automatically source from all three plants, according to some fixed ratio, then remove the SPK from the Material Master, and create Purchase Info Records for all three source plant vendors. Then, enter these Purchase info records into a quota arrangement, according to the ratios you wish to procure by.
Best Regards,
DB49

RV320 with NAT source from multiple subnets

Hello,
I want to buy a router that will do NAT for multiple subnets, such as in the following configuration from Cisco IOS:
interface FastEthernet0/0
ip address 172.16.1.1/12
ip nat inside
interface FastEthernet0/1
ip address a.b.c.d/29
ip nat outside
ip nat pool dsl-pool a.b.c.e a.b.c.f prefix-length 29
ip nat inside source list 20 pool dsl-pool overload
access-list 20 permit 172.16.1.64 0.0.0.63
access-list 20 permit 172.16.21.0 0.0.0.255
It is possible on Cisco RV320 device?
Regars.
Krzysztof

Hi,
This should be no problem. It should work as you have thought.
I tested the configurations on my own ASA
object-group network REGIONAL-SOURCE
network-object 10.1.1.0 255.255.255.0
network-object 10.1.2.0 255.255.255.0
network-object 10.1.3.0 255.255.255.0
object-group network REGIONAL-NAT
network-object 10.1.201.0 255.255.255.0
network-object 10.1.202.0 255.255.255.0
network-object 10.1.203.0 255.255.255.0
nat (LAN,WAN) source static REGIONAL-SOURCE REGIONAL-NAT
Here at the results of the "packet-tracer" to show the translations
ASA(config)# packet-tracer input LAN tcp 10.1.1.100 12345 7.7.7.7 80
Phase: 4
Type: NAT
Subtype:
Result: ALLOW
Config:
nat (LAN,WAN) source static REGIONAL-SOURCE REGIONAL-NAT
Additional Information:
Static translate 10.1.1.100/12345 to 10.1.201.100/12345
ASA(config)# packet-tracer input LAN tcp 10.1.2.100 12345 7.7.7.7 80
Phase: 4
Type: NAT
Subtype:
Result: ALLOW
Config:
nat (LAN,WAN) source static REGIONAL-SOURCE REGIONAL-NAT
Additional Information:
Static translate 10.1.2.100/12345 to 10.1.202.100/12345
ASA(config)# packet-tracer input LAN tcp 10.1.3.100 12345 7.7.7.7 80
Phase: 4
Type: NAT
Subtype:
Result: ALLOW
Config:
nat (LAN,WAN) source static REGIONAL-SOURCE REGIONAL-NAT
Additional Information:
Static translate 10.1.3.100/12345 to 10.1.203.100/12345
As you can see, everything is fine
Naturally take into consideration the fact that if you were to (for some reason) remove a "network-object" statement from some "object-group" then the operation of the "nat" would change even if you entered the removed "network-object" back. (unless you removed the last "network-object" inside the "object-group") This is because the order of the "network-object" inside the "object-group" would change. You would essentially have to recreate the "object-group" and "nat" configuration.
Hope this helps
Please do remember to mark a reply as the correct answer if it answered your question.
Feel free to ask more if needed
- Jouni

Replication of a data source from multiple logical systems

Hi experts,
In our ERP wie run many different clients with correspondong logical systems. When I'm changing a data source in ERP, then I have to replicate this datasource for each single logical system.
My question :
Is there a way to replicate a data source for all logical systems belonging to an infos source at once ?
We are on BW 3.5 SP19.
Thanks in advance
Joe

just another attempt

How to creat Data source from Multiple Tables in   SAP BI ?

Hi Experts,
1. For Finance & Payments MIS   tables are u2013   BSEG, BSIS,BSAS,PYAR ,BKPF
2. For Inventory tables are           :           MSEG MKPF.
3. For Invoices MIS   tables are -          RBKP & RSEG.
4. For Taxation MIS tables are u2013           J_1IEXCHDR, J_1IEXCDTL, J_1IPART2, J_1IPART1
5. For Master data tables are   -    :         MARA, MAKT, LFA1, J_1IMTCHID
How to creat   individual Datasource for   1.Finance & Payemnt Mis , 2. Inventory, 3. Invoices, 4. Taxation , 5. Mater data. ?

Hi,
Go for the generic data sources.
1. first create the view on all the tables.
        You can only use join conditions but not Union.
        you can specify one table as primary table based on your requirement.
2. build the data source based on the view.
Regards,
Siva
Edited by: sivaramakrishna on Feb 2, 2012 3:54 PM

Has anyone successfully implemented a drop shipping eCommerce solution with MULTIPLE suppliers?

Hi there
I have read a few BC forum articles on this subject, but none seem to have clarified whether a drop shipping eCommerce solution with MULTIPLE suppliers can truly be implemented successfully in BC.
In particluar, my concern is with splitting up ONE online order with products from MULTIPLE suppliers ... and split up the order into its individual supplier components and thereby calculate freight costs for each of the suppliers i.e. the freight cost should really be calculated for each of the suppliers SEPERATELY and not for the order as a whole.
Forum post http://forums.adobe.com/message/4881302#4881302 addresses this issue and Liam Dilley [as always] kindly responded. But his response indicates this is not possible with BC.
If this is the case, drop shipping in BC is quite useless unless:
1. you had only one supplier
2. or, you somehow restricted each order placed to products from only one supplier - which I am unsure is even possible even with JQuery
Any feedback from the community would be most appreciated.
Regards
Gavin

You have two requirements:
1. Once ordered, split the order into suppliers, contact the supplier of the product, give the information of the order to the customer. Supplier ships it. This could be done manually but a pain in the ***. I would assume you want it automated.
2. When ordering, multiple products require mutliple shipping rates. As the shipping from location could be different for each product you can't just use the ship from one location option.
Solutions:
1. This is the easier one, you record the supplier in the product via a form or in the product item itself. If you wanted to automate here you could via API, if you wanted to do it manually you also could.
2. Shipping calulator, to make things easier you would have to do everything by weight. Use Javascript to remove the default shipping option on the checkout page, pass all the items in the shopping cart. Use a lookup table function in Javascript "item name to weight" then have another function item to (from) shipping location. Work out the shipping and display it and force change with Javascript BC's shipping price (so the customer pays the correct amount).
Like Liam says, it's not something BC does too well at the moment and the above solution is more of a workaround but does work.

Can we merge data from multiple sources in Hyperion Interactive Reporting ?

Hi Experts,
Can we merge data from multiple sources in Hyperion Interactive Reporting ?Example can we have a report based on DB2
Oracle,
Informix and Multidiemnsional Databases like DB2,MSOLAP,ESSBASE?
Thanks,
V

Yes, Each have their own Query and have some common dimension for the Results Sections to be joined together in a final query.
look in help for Creating Local Joins

How to load data into an ods from multiple info sources.

hi all...
i am given a task to load data into an ods from 3 infosources ...
can someone plz give me the flow .
thank u in advance..

Hi Hara Pradhan,
You have to create 3 update rules by giving the 3 different infosources while creating each update rule. And u have to create the infopackages under each infosource. with this u can load the data to the same data target from multiple info sources.
Hope it helps!
Assign points if it helps!

Satellite L-50 can't play audio from multiple sources

I can't play audio from multiple sources. This is very annoying when I have 2 youtube videos playing, if I start playing something on the media player, there is no sound on media player, it's the same when I have 2 media players open and 1 youtube video playing, youtube video doesn't have sound..
I already have all the latest drivers, last DTS driver update was in 2014, sound update this year's february..
25/02/14
DTS Studio Sound
DTS Inc.
Windows 8.1 - 64 Bit
1.01.2700
I don't know if this makes sense, but I got newer DTS sound driver which I found, It's not my laptop model, but they all seem to be the same - v1.1.88.0
I uninstalled DTS software and still had the same problem, so it's not affecting sound driver in any way..
10/02/15
Sound Driver
Integrated Device Technology Inc.
Windows 8.1 - 64 Bit
6.10.6491.0
IDT audio driver has newer release date, but the driver version is the same as the 2013 one..
Why are toshiba releaseing old driver as 'NEW' ?
2nd is my speakers advanced settings, nothing changed when I disabled "Allow applications to take exclusive control of this device"
Attachments:
audio.png ‏6 KB
test2.png ‏7 KB
specs.png ‏16 KB

Can you check the full model and part number from the laptop?
- Peter

Satellite L50-A-19N can't play audio from multiple sources

I can't play audio from multiple sources. This is very annoying when I have 2 youtube videos playing, if I start playing something on the media player, there is no sound on media player, it's the same when I have 2 media players open and 1 youtube video playing, youtube video doesn't have sound..
It goes away when I plug out my headphones..
I already have all the latest drivers, last DTS driver update was in 2014, sound update this year's february..
25/02/14
DTS Studio Sound
DTS Inc.
Windows 8.1 - 64 Bit
1.01.2700
I don't know if this makes sense, but I got newer DTS sound driver which I found, It's not my laptop model, but they all seem to be the same - v1.1.88.0
I uninstalled DTS software and still had the same problem, so it's not affecting sound driver in any way..
10/02/15
Sound Driver
Integrated Device Technology Inc.
Windows 8.1 - 64 Bit
6.10.6491.0
IDT audio driver has newer release date, but the driver version is the same as the 2013 one..
Why are toshiba releaseing old driver as 'NEW' ?
2nd is my speakers advanced settings, nothing changed when I disabled "Allow applications to take exclusive control of this device"

I see that the option called “give exclusive mode applications priority” has been checked.
Usually different applications and programs can access the sound card simultaneously.
For example: you can hear the sound in game, while you can run your own music via an external player.
This is prevented with these options “give exclusive mode applications priority”.
Maybe you should disable (uncheck) this option to prevent the different applications for using this exclusive mode stream.
I did it for my DAC. I set the DAC for exclusive mode. Once my audio playback software starts to play music, no other software is able to share the DAC.
However, I use Win 7 and Realtek sound driver… It’s another configuration.
So it’s not known to me if your issue is related Win 8.1 system or maybe limitation of sound driver… it could be also possible that one of your sound applications don’t allow multiple sound streaming.

Any Tutorial / Sample to create Single PDF from multiple source files using PDF assembler in a watched folder process.

Any Tutorial / Sample to create Single PDF from multiple source files using PDF assembler in a watched folder process. I have a client application which will prepare number of source files and some meta data information (in .XML) which will be used in header/footer. Is it possible to put a run time generated DDX file in the watch folder and use it in Process. If possible how can I pass the file names in the DDX. Any sample Process will be very helpful.

If possible, make use of Assembler API in your client application instead of doing this using watched folder. Here are the Assembler samples : LiveCycle ES2.5 * Programming with LiveCycle ES2.5
Watched folder can accept zip files (sample : Configuring a watched folder to handle multiple input files and write results to a single folder | Adobe LiveCycle Blog ). You can also use execute script to create the DDX at runtime : LiveCycle ES2 * Application Development Using LiveCycle Workbench ES2
Thanks
Wasil

Open Hub - Data from multiple sources to single target

Hello,
I am using Open Hub to send the data from SAP BI to Flat files. I have a requirement where I want to create a single destination from multiple sources. In other words in BI we have different tables for attributes and text. I would like to combine the data from attributes and text into a single file. For eg. I want to have material attributes and text in the same single file as output.
Is this possible in Open Hub? If yes could you please help me to understand the process.
Thanks,
KK

Hi,
1. Create the Info Spoke and activate it
2. Change it and go to transformation
3. Check the box InfoSpoke with Transf. Using BAdI
4. You are asked if you want to generate the spoke. Say yes & Simply set some texts and activate here, then return.
5. You can now change the target structure. Simply create a Z structure with all the attributs & text field in it in the SE11 and enter it here.
6. Double click on BAdI implementation & then double click again on "TRANSFORM" method of the implementation. It will take you to method
"IF_EX_OPENHUB_TRANSFORM~TRANSFORM"
7. Write a code to select & fill the text field & map other filed with the attribute fields.
Example:
ZEMPLOYEE_ATTR_STRU - Target Structure for InfoSpoke EMPLOYEE_ATTR
EMPLOYEE     /BI0/OIEMPLOYEE     NUMC     8     0     Employee
DATETO     /BI0/OIDATETO     DATS     8     0     Valid to
DATEFROM     /BI0/OIDATEFROM     DATS     8     0     Valid from
COMP_CODE     /BI0/OICOMP_CODE     CHAR     4     0     Company code
CO_MST_AR     /BI0/OICO_MST_AR     CHAR     4     0     Controlling Area of Master Cost Center
HRPOSITION     /BI0/OIHRPOSITION     NUMC     8     0     Position
MAST_CCTR     /BI0/OIMAST_CCTR     CHAR     10     0     Master Cost Center
TXTMD     RSTXTMD     CHAR     40     0     Medium description
Note: Text and attribute are in same structure.

Data Extraction from Multiple data sources into a single Infoprovider

Hi Experts,
Can anyone send me links or examples on how to extract data from multiple data sources into 1 Cube/DSO.
Can anyone send me example scenarios for extracting data from 2 data sources into a single Cube/DSO.
Thanks
Kumar

Hi Ashok,
Check the following link from SAP help. Ths is probably what you are looking for.
[ Multiple data sources into single infoprovider|http://help.sap.com/saphelp_nw70/helpdata/en/e3/e60138fede083de10000009b38f8cf/frameset.htm]
Data from multiple data sources which are logically related and technicall have the same key can be combined into single record.
For example, if you have Sales order item and sales order item status .
These both have the same key - sales order and item and are logically related.
The Sales order item - provides information on Sales order item - material , price, quantity, plant etc.
The item status - povides information on delivery status, billing status, rejection status....
These are two different data sources 2LIS_!1_VAITM ad 2LIS_11_VASTI.
In case you have few master data attributes coming from different systems ie tow data sources in different systems say completely defines your master data. Then you could use a DSO or infoobject to combine the records.
If you want to see aggregated data you use a cube.
ie say you want to analyzae the customer revenue on a particular material and a particular project.
The project details would come from Project syatem and Sales details fom sales flow.
The data is then combined in the DSO with key cutomer and sales area say.
Then it is aggregated at cube level...by not using sales order in the cube model...so all sales order of the same customer would add while loading the cube.. to give direct customer spend values for your sales area at aggregated level.
Hope this helps,
Best regards,
Sunmit.

Does OBIEE has ability to create a single cube from multiple data sources?

Hi all,
Does OBIEE has the ability to create a single cube from multiple sources and does it has the ability to join multiple cubes?
Looking forward to ur reply.

Hi
OBIEE can join multiple data sources to make a single data model, but it's not a cube in the multi-dimensional sense like Essbase or Oracle OLAP.
To be able to join datasources together they need to have a common dimension or FK relationship depending on what the source is and what you want to do with it.
Ed

How can i import the data from multiple sources into single rpd in obiee11g

how can i import the data from multiple sources into single rpd in obiee11g

Hi,
to import from multiple data sources, first configure ODBC connections for respective data sources. then you can import data from multiple data sources. When you import the data, a connection pool will create automatically.
tnx

Sourcing from multiple supplier

Similar Messages

Maybe you are looking for