Sourcing workbook eso_security_rights vs. security_rights etc..

From a security view point, if I look at workbook, I see Security Profiles/Rights, Accounts & Groups twice. One as is, and the other "eso_". If I look at the table structure both look a like. I would like to know what is the purpose of having eso_* in addition.

Hi Vinod,
Just to add another point what Vikram has mentioned;
The purpose of having eso_* workbook-sheets are to provide some additional entries that would be useful for an implementation. (you can verify there will be eso_numbering table with entries project, RFx, auction details. same rule applies for other objects as well which are having eso_*.)
Thanks
Jagamohan

Similar Messages

Multiple Destination Workbooks link to single source workbook - data dissappearing

We have a sales reporting system set up with ~30 Destination Workbooks that pull all of their data directly from
a single Source Workbook - using vlookup formulas (with full path name references to the Source Workbook).
When we open two or more of these Destination Workbooks at a time without opening the Source Workbook – or enabling data connections or links – all of the vlookup data disappears from all but the most recently opened Destination Workbooks.
The only work-around we have found for this is to open the Destination Workbooks in separate instances of Excel. This method is not practical for our analytical needs.
Is there any different way to have data visible in more than one Destination Workbook in a single instance of Excel that are vlookup-ing from a single Source besides re-structuring the entire setup?

Hi,
I tested with a simple source Workbook closed from my side, I was able to perform Vlookup from more than 3 destination Workbook without any issues.
To better assisting you on this, I will need some more information:
What is your Excel version, 2013/2010 or others?
How do your Vlookup be used, do you mind sharing me a sample through mail to: [email protected]
Does this working before? If so, what has been changed?
How do users get access to that source file?
Is there firewall settings on the share location of the source file?
Please update me with above information, so I can check further, thank you.

Excel 2010 analyzing in another workbook using PowerPivot. Update in the source workbook (insert a new column) doesn't show

Excel 2010 workbook (A).
Analyzing in another workbook (B) using PowerPivot.
After a column insert in the source workbook (A) that update is not shown in the updated table in workbook (B)
I can however have an updated table in (B) if I define a new connection. But that is in another tab then.
So How to update the data that is input to the pivot tables using the "old" connection (connection to A)

Linked tables must reference Excel
data found in a separate Excel window within
the same PowerPivot workbook.

Looking for Sourcing Workbooks

All,
We are migrating from a legacy Sourcing and CLM system to SAP eSourcing. We are basically looking to migrate following data:
- Master Data for RFx and Acutions
- Existing RFx and Auctions
- Master Data for Contracts
- Existing Contract
As we have read in this forum, there are workbooks available for the same which details the field level information required for SAP eSourcing. If someone can please point me on where we can download the same from, that will be of great help.
Regards,
Jai

Hi Jai
In order to find workbooks to upload data to e sourcing, you can log in as enterprise user and go to RG mentioned at the top of workbench. here you would find the following workbooks:
Enterprise QuickStart: this workbook would enable you to set up initial enterprise information including master data, RFx/ Auction/ Master afreement doument types, security profiles etc
Company Quickstart: This workbook would basically allow you to setup initial sourcing company including master data such as materials, plants, cost center,doc security templates etc.
Contract Import Workbook: This workbook would help you set up the master agreements in CLM including line items details
In order to upload existing contract PDF/ DOC file in CLM you can ask SAP (there is a SRM Contract Attachment Importer customization functionality available to mass upload contracts PDF/ DOC to resp. master agreements)
I am not too sure regarding existing RFx/ Auctions. there is a way for bzd format files but I dont think that would apply in your case
Regards
Mudit Saini
Edited by: Mudit_UCB on Jun 22, 2011 12:44 PM

CSS source problems, property menu vanished etc - help!

Hi all,
First time poster - would be grateful for your help.
I'm creating my first site with Dreamweaver. It was all going swimmingly, and suddenly the interface seems to have changed and I can't get it back to the one I now sort of understand!
The properties tab along the bottom is now just "code view" and doesn't contain the stuff about links etc that was there previously. Additionally, my CSS source box is empty, and clicking "add source" doesn't seem to do anything. My "main.css" file is still there in the file hierarchy box above, but I don't seem to be able to add it as a source (not sure what I did to take it away in the first place!!)
Help!

Thanks for getting back to me. After hours of frustration, I turned it off and on again... All working as normal now...
Doh!

Uploading Security profiles & Security rights using sourcing Workbook

I am trying to use workbook to upload Security profiles & Security rights, and finding it difficult to get the "Resource" field mapping attributes in "eso_security_profiles" tab of the workbook. Is there a reference sheet for this, or a place from where I can map the display names with resource.
Example: If I want update the security rights for Currency attribute with in Master Data under Security Rights tab, we need to use "masterdata.Currency" in "Resource" field of "eso_security_profiles" tab in the workbook. similarly from where can we get the entire list of attributes and thier Resource.

Hi,
When I take the download from localized resources (*.class_name), inorder to map the display security attributes to "Resource" in workbook, I am still unable to find the Resource for few attributes like..below..
Queued Messages
User Impersonation For Buyer
User Impersonation For Seller
Cache Configuration
Cluster Configuration
Daemon Alerts.....
and there are many more for which I dont have a match. Please suggest if there are any tips or considerations that we can help while trying to achieve this.
Thanks in advance.
Vinod.

SUN TEAM URGENT: auto creation of data source, connection pool, ...etc

to the sun team,
i have been using NB+VWP to deploy an application created in JSCU2 to a Sun App Server 9.
for some reason, whenever am viewing a DB connection in the servers window and drag-drop a table on the page, the system is automatically creating a new data source, a new conneciton pool, and new jdbc resource. also, it is removing the necessary references in web.xml and sun-web.xml.
is there any way to get around this? otherwise, i am forced to modify the jdbc settings in the server as well as the config file each i drag-drop a DB table/view.
thanks so much
- Peter

Unfortunately, this is a bug and should be fixed in the next release.
I'll look for the issue id.
In the meantime, this workaround may help:
http://wiki.netbeans.org/wiki/view/VWPUserFAQsavewebxml
John Baker
http://blogs.sun.com/dashboy

My AppleTV 2 when I want to play media from iTunes 10.5 and my AppleTV also has up to date firmware Keeps dropping my "Home Sharing" connection while all other media sources YouTube,Netflix...etc still work?

My AppleTV 2 when I want to play media from my WinVistaPC 64bit iTunes 10.5 and my AppleTV also has up to date firmware when trying to play media from the "Computer" tab on the AppleTV my PC and all of the media be it music ,movies or podcasts it tries to load the spinning thing on the middle of the screen never loads then my PC disappears from the AppleTV and says "From your computer in iTunes login to Home Sharing with your AppleID " so I do that and IT STARTS WORKING! BUT! then after the media finishes playing it regresses back to the same problem and I have reinstalled iTunes and it doesnt resolve anything it says under the advanced tab of iTunes 10.5 that "Home Sharing is ON!" and I have to click "Turn off Home Sharing" then re enter my password again and restart the entire process only to have it let me play 1 media file of any Apple formatted files once it ends its back to the drawing board? Thankyou in advance for any knowledge you may share
Samuel

My AppleTV 2 when I want to play media from my WinVistaPC 64bit iTunes 10.5 and my AppleTV also has up to date firmware when trying to play media from the "Computer" tab on the AppleTV my PC and all of the media be it music ,movies or podcasts it tries to load the spinning thing on the middle of the screen never loads then my PC disappears from the AppleTV and says "From your computer in iTunes login to Home Sharing with your AppleID " so I do that and IT STARTS WORKING! BUT! then after the media finishes playing it regresses back to the same problem and I have reinstalled iTunes and it doesnt resolve anything it says under the advanced tab of iTunes 10.5 that "Home Sharing is ON!" and I have to click "Turn off Home Sharing" then re enter my password again and restart the entire process only to have it let me play 1 media file of any Apple formatted files once it ends its back to the drawing board? Thankyou in advance for any knowledge you may share
Samuel

Business One and Open Source Web Front-Ends, PHP etc.

Hi there,
I am a complete newbie to all things SAP, so please excuse my ignorance.
I am trying to implement a solution for SAP Business One, including a web front-end for queries and information. The SAP backend is running on a SQL Server, Windows 2000.
The catch is, I won't be running the web front-end off a Windows server. I need to find a solution for an Apache server, running (probably) PHP but could be JSP or any other scripting language to access SAP - but it will be running on a separate server, non-windows.
I have been given examples of people getting access to the DI Server using PHP, but it all involves a call to a COM() function that won't run from anything except a Windows server.
How can I acheive the same result running a PHP page from an OpenBSD or Linux / Apache server? Is the DI Server the right thing to be looking at, or am I going in completely the wrong direction?
Any help would be appreciated.
Thanks,
Nick.

post your question in SAP Business One SDK for better response.
Regards
Raja

SharePoint 2013 - SQL Server 2012 PPIV - using a PPIV workbook as a data source - getting PPIV web service error

I created a PowerPivot (SQL Server 2012 SP1) workbook and uploaded it to SharePoint 2010 Portal and started using it as a data source in an excel file. This worked fine and we saw no issues with it until we moved to SharePoint 2013 environment.
I uploaded the same PowerPivot workbook (source workbook) to SharePoint 2013 Portal and now trying to use it as a data source. I tried to change connection properties so that I could use the new portal address for the workbook. When
I try to save my changes, I see that OLAP queries are getting fired "Refreshing OLAP cube" shows up in the status bar, but eventually after running these OLAP queries (I would say after a minute), I get the following error -
Couldn't find anything specific in SharePoint logs or maybe I wasn't looking for the right thing.
Has anyone seen this issue? Why would PPIV service throw an error after running for a while? Is it a timeout issue of some kind? How can we take care of this?
Thanks,
Sonal

ULS log showed the following exception: The maximum number of allowed sessions per user has been exceeded.
Under Excel Services global settings, max limit is set. Default is 25, increasing it resolved this issue.
Thanks,
Sonal

Does my bashrc need to source /etc/bashrc

In Fedora/Centos, my local .bashrc file seems to need to have a line to source global definitions:
if [ -f /etc/bashrc ]; then
. /etc/bashrc
fi
On Mountain Lion and Mavericks, it appears that /etc/bashrc is always sourced whether I have a local .bashrc or not. Verified with echo statements inside various files to show me what is being executed.
I am trying to get confirm if this is true (for both interactive shells and child processes spawned by parent process) and, if so, does it do any harm to keep the sourcing of /etc/bashrc. I'd prefer to not have to have different .bashrc files for Linux and OSX.
Thanks in advance for any advice

I've got my answer for an interactive earlier in this thread (or at least enough to begin figuring out what I need to do regarding interactive shells and my local .bashrc). I pretty well understand the order that things are sourced in interactive, but was unprepared for the difference of OSX /etc/profile sourcing /etc/bashrc (which doesn't seem to happen on Linux).
As for non-interactive, I tried to do as much research before querying on this forum. I know that they just do .bashrc. Hence why I see advice (and I have long followed such) to have .bash_profile source .bashrc to have all "my stuff" in one file that both interactive and non-interactive source. However, I can not figure out whether a non-interactive / subshell inherits and/or sources /etc/bashrc (which on OSX I now know comes through /etc/profile). My sense is that it does on OSX based on the other reply I got. Which would mean that whether I need to source /etc/bashrc is the same for interactive and non-interactive since, on OSX, I get the sense that any shell, interactive or non-interactive, is going to first call /etc/profile. As you can tell, I am having to make this final statement based on "best understanding".
If I am misunderstanding non-interactive, can you please point me to a good link(s) that pertain to what OSX does (now that I know there is a very real difference between Linux and OSX and info for one might/will not work for the other).
Thanks for your reply

Logical level for logical fact table sources

it is clear that for fact aggregates, we should use the Content tab of the Logical Table Source dialog to assign the correct logical level to each dimension.
question is : is it mandatory to assign even for non-aggregates fact tables the logical level for each dimension (which normally should be set to the most detailed level of each dimension) ? is it any known issue if "logical levels"in content tab are not set ?
the reason I'm asking this is a strange bug I have (I'm not going to discuss it here) and then only workaround seems to be NOT setting the logical levels (on content tab) for logical fact table sources.
thank you !

If levels are not set: By default levels are considered as lowest level
It should not matter if you set or not
Generally we set for facts explicitly when we are using Aggregate tables.
Your current issue might be a case by case; I would suggest to check implicit fact, any table mapped to the source to force a join etc
Mark if helps
Let me know how it helps
Edited by: Srini VEERAVALLI on Feb 5, 2013 8:33 AM
Any updates on this?+_
Edited by: Srini VEERAVALLI on Feb 14, 2013 9:09 AM

Getting all the members (variables, methods AND method bodies) of a java source file

For a project I want to programmatically get access to the members of java source file (member variables, methods etc) as well as to the source code of those members. My question is what is the best method for this? So far I have found the following methods:
Use AST's provided by the Java Source API and Java Tree API, as discussed in the following posts:
http://today.java.net/pub/a/today/2008/04/10/source-code-analysis-using-java-6-compiler-apis.html
http://weblogs.java.net/blog/timboudreau/archive/2008/02/see_java_code_t.html
http://netbeans.dzone.com/announcements/new-class-visualization-module
This has the disadvantage that the classes actually have to be compilable. When I look at the Netbeans Navigator view however, it provides me with a nicely formatted UI list, regardless of the "compilable" state of the class.
Thus I started looking at how to do this... The answer appears to be through the use of tools such as JavaCC: https://javacc.dev.java.net/
ANTLR: http://www.antlr.org/
which are lexers and parsers of source code. However, since the Navigator panel already does this, couldn't I use part of this code to get me the list of variables and methods in a source file? Does the Navigator API help in this regard?
Another route seems to be through tools such as
BeautyJ: http://beautyj.berlios.de/
which run on top of JavaCC if I am correct, and which has the ability to provide a clean view on your java code (or an XML view). However, BeautyJ does not seem to be too actively developed, and is only j2se1.4 compatible.
I hope someone can shed a light on the best way to go about what I want to achieve. Somebody already doing this?
(I crossposted on the Netbeans forums too, hope this is OK...)

I'm currently developing a LaTeX editor(MDI) and I do the same thing, but I don't know what exactly do you need.

20.0.1 Update: right-click on page shows ALL menu options, many (all?) don't work, no "view page source", no "open in new tab"

after update to 20.0.1 a few hours ago, right click shows ALL menu options, many (all?) don't work, like "view page source", "open in new tab" etc. etc.

I'm having the same issue on Firebug 1.11.3....The "more robust" right click menu does return when I disable the extension. Would you recommend downgrading Firebug to 1.11.2? Hate to have to turn off Firebug "except when I'm working" but either option seems to have both pros/cons.
This behavior happens on both PC and Mac (although the above information was tested on my PC - I'll have to check the Mac later and see if Firebug is doing the same thing there. I believe I have the most recent Firebug there, too)
The PC is on Firefox 20.0.1, Mac should be as well.
Thanks

When i click a link on (facebook, google, yahoo, etc) it sends me back to my home page. It has done this at least 5 times only starting yesterday the 29th, one of numerous issues arrisen since the newest 4.0 security update.

This issues persists mainly on my two most frequently visited sites, Facebook, and deviant art. When I click any random link on any random page, the link would send me back to my home page, as if i had clicked the back button when i hadnt. I cant specify what links specifically, but it has done it twice on my facebook home page, once on a google search and several times on Deviant Art. On Deviant Art, I was several pages into the site when i clicked on a users gallery and it sent me right back to google, the back button wasnt active, but the forward button was, when i clicked the FORWARD button it went right back to my last page, just as if i has hit BACK. This problem has only been apparent for the last 2 days since the 29th, and only after i installed the last security update provided by the firefox team. seems like a bad coding error that mixes up and redirects addresses, that would be my guess.

adkennon wrote:
And maybe you don't talk to too many people but I've been on many forums on different websites where people have had similar problems and a lot of people in the store were having battery problems where they were draining too fast. What I learned is that all the people who did not download the updates are good. There phone is working the same. The people who have, they're having battery problems
I have downloaded every update and my battery life is better than any previous iPhone I have ever owned. I see posts from hundreds of people every day, and this is not a commonly reported problem. While there are a few random reports of battery problems, it is no more than I have seen for any other model or any other version of iOS in almost 8 years. Usually problems of rapid battery drain can be traced to bad apps (FaceBook is the worst offender) or corrupt data being synced from iCloud or other sources (gmail, Windows Live, Yahoo, etc).
The simple test is to restore the phone as New. Do not create any email accounts. Do not install any apps. Do not enable FaceTime or iMessage. Do not enable Twitter or any other social networking app. Use it for a day and check the battery usage. You will find that it is working well.
And also see this: http://www.overthought.org/blog/2014/the-ultimate-guide-to-solving-ios-battery-d rain. It is the best treatise I have seen on the subject of battery usage.

Sourcing workbook eso_security_rights vs. security_rights etc..

Similar Messages

Maybe you are looking for