Soure list

Dear All,
ME03, MEOM , shows the soures list based on the material and plant . however we need tosource list by vendor wise , is it possible ?.
Rgtm,
KT

Hi
Source List (ME01) - The source list facilitates the det. of the source that is applicable (effective) at a certain point in time.
[We have to mention Valid from u2013 to date, Vendor, Pur. org., Agreement, Fixed source of supply or Blocked source of supply, Source list usage in materials planning and control]
Source Determination - The process of finding sources of supply for a material or group of materials.
Thanks & Regards,
Senthil.

Similar Messages

Lead time calculation

Dear Gurus,
I want to calculate lead time between purchase order and goods receipt.how to do that???
Am having some doubts.
Does the lead time links with
Planned Delivery Time
Goods Receipt Processing Time
Purchasing Processing Time in material master. plz explain???

Hi,
If you create PR for a material, using MRP, then the planned delivery time would be picked up from the material master, please note that there is no source maintained yet in the PIR, so obviously that rules out planned delivery time of PIR and Vendor Master( even when u convert this P.R to P.O the planned delivery time will not change and will not be taken from the PIR)
Now if you directly create a P.O then the planned delivery time of the PIR is picked up , please note this difference.
I would recommend that you change the planned delivery time in the material, mnake it different from the planned delivery time of the PIR, and then run MRP, You will see that the planned delivery time in the PR would be based on the material planned delivery time.
Even if you assign source and convert this P.O using ME59 the PDT will not change.
Then you can try and create a P.O directly with the vendor, here you will notice that the PDT flows from the info record.
Please let me know if this addresses your concern.
Regarding your soure list issue, either you can remove the source list mandatory tick in MM or add the vendor whose PIR you are using into ME01, and it will definitely work.
Regards
Shailesh
Edited by: Shailesh Rajan on Jun 30, 2011 7:51 PM

Purchasing Info Record- Different Regular Vendor for different Plant

Dear Guru,
I'm encounter a problem with PIR.
I have this PIR 9001 (Vendor A) and 9002 (Vendor B) for material A, which i have extended to 2 different Pur.Org 0001 under company code 0001 and Pur.Org 0002 uner Company code 0002.
For Pur.Org 0001, i set the Regular Vendor as Vendor A, but when i trying to set the regular vendor for Pur.Org 0002 to be as Vendor B, i receved the message as "Up to now, vendor A has been regular vendor for this material".
And After i changed this Regular vendor to vendor B, this changed have also affected the PIR for Pur. Org 0001.
Can i know if there is a way to change the PIR Regular vendor at Pur.Org or Plant level?
Thank you very much,
Regards,
Chee Wee

Hi,
Regular vendor is at client level.
That's why, you cann't maintain more then one vendor (Source of supply) for the same material.
If you want to maintin separate vendor for the each plant and same material combination, then don't activate / select regular vendor option in the info record. You have to maintain source list.
Sour list is nothing but a list of source of supplies for the specific plant and material combination with in the validity period of time. If there are more then one vendor for the specific plant and material combination for the same validity period of time, then you can activate fixed vendor option in the source list. Then at the time of creating PO, SAP will pick fixed vendor for the Plant and Material combination.
So first, system will check whether regular vendor is there for this material in the info record. If is there,system will pick regular vendor in the PO. If not, then system will check fixed vendor in the source list for the material and plant combination. If yes, then system will pick fixed vendor from the source list. If not system will propose all the vendors in the source list. If the source list it self not created, then user has to give vendor number manually.
Regards
KRK

Unable to create packaging material PO

Hi Expert!
Need your help again..
I can't create packaging material PO.. The error is.."source not include in list despite source list requirement". Why am i having this error? How to fix it? Is it because of vendor has been blocked? How to check? Please anyone help me to solve this problem. Otherwise i can't create any PO for packaging material..
Thanks..

Hi
Please maintain the source list for the material
Or remove the soure-list req tick form the material master.
Regards
Niti Narayan

How to generate automatic PO by MRP run

how to generate automatic PO by MRP run ?
tell me the settings for that.

Hi,
Basic Settings: SPRO-MM-CBP-Planning->>MRP should be activated for that particular plant.
SPRO-MM-CBP-Plant Parameter->>maintain for particular plant
Material master: Maintain MRP views with required MRP Type, MRP Controller, Lot size, Flag Auto PO
Vendor master: Flag Auto PO
Info record (Must) / Soure list (Preferred)
1. MD21 - Planning file concept : where you can see the list of material required to plan for procurement.
2. MD03 - Run MRP . Production oder or Purchase Requisition will be created
3. ME57 - Assign Souce & process PR
4. ME59n - Auto PO created from PR
Note: if we maintain sourcelist with MRP indicator, we can avoid transaction ME57n.

Audigy 4 / Line-In not listed as sour

Hello, I have installed a new Audigy 4 sound card into my computer yesterday. And since then I have been trying to figure out why the Line-In is not listed as a source to record from.
It is listed under volume control, but nowhere in my computer, in the supplied software, or in my recording software will it let me select the Line-In.
It gives me the options of using:
MIDI Synth
S/PDIF-In
"What U Hear"
Analog Mix (Line/CD/Aux/TAD/PC)
Microphone
Wave
But seems to completely ignore that there is a Line-In source by itself.
I can hear the Line-In perfectly when something is plugged into it, and it records fine with "What U Hear" or Analog mix, but those settings are not usefull to me because I need to be able to record just the isolated Line-In source without recording any sounds that are already playing.
Anybody have a solution?

On the Audigy family there is no line-in. To use the line-in, you need to set your recording source to be "Analogue mix" and tick the option "Record without monitoring" in the recording source's advanced properties.

How can I get more than 5 items in my Recent Projects list?

After a rather horrendous incident with trying to do a series of videos all in one project using bins and shared media and a savefile that got *WAYYY* out of hand (20 minutes to load the file)- which I believe was tied to importing media from another .proj file, I have switched to a more modular approach with anywhere from 2-5 projects in each project and now a collection of around 15-25 projects on the go. Most of these are "work on a chapter, then change to another project while waiting for footage for another project" and several of them share pieces including multicam segments and sync'd audio.
Rather than importing from another project, I am using Control-C, switch to a different project file, then paste in. This isn't the most "Adobe Professional" style way of doing things, but considering that I lost several hours to trying to recover from the last project, even when I only needed to spend 20 minutes pumping out a rough cut, I'm not going back to that method until my next computer upgrade and until I begrudgingly switch to CC in around 1-1.5 year's time.
So the issue that I'm faced with is that I'm often using the Open Recent Project flyout and having 5 projects on that list is just not enough to be remotely useful.
In MS Office, the list is quite long and even in photoshop, I can get 10. That's enough for my Photoshop, but I switch projects using the Recent Projects list in Premiere a LOT more often. I could just use my explorer windows to jump around, but given that I have 5-6 explorer windows open per project most of which are folders crammed with footage, PSD stills and peak files, plus other non-video things I'm working on right now, that's really not the simplest way to navigate at a glance.
How can I get 10, 20 or 25 items in that flyout list instead of mucking about with 5?
I run Adobe Production Premium CS6.

I see a lot of people not reading the circumstances of what I said.
I did mention that currently I use the "explorer" method and it's kind of clumsy. Although I liked the idea of using shortcuts. I had thought about moving the files, but didn't think about shortcuts... considering everything on my desktop is a shortcut, I'm really not sure why I didn't think of that.
But I did mention that I almost always have anywhere from 12-15 windows open at any given time in my explorer. I am involved with management of 4 different companies right now, two of which are in startup mode. Videos are important for me, but not my only duty. These windows only go down when I shut down my computer, which happens on average once every 4 months. It is not a problem on a reasonably capable system.
Still, for a project of currently 23 files (just got increased to 28 and expected to rise to 32-35), and because I have had project files go sour on me, I keep some hierarchy and because I don't have 100% creative control over all my projects, I also occasionally have to do re-overs ie when a specific style of writ is nixed by a boss or customer. Those 23 project files also have version iterations.
So navigating 'at a glance' through a file explorer isn't always the most practical.
In the end, I'll probably try to find some time to re-organize my file structure using shortcuts.
Still, given the number of 'recent files' can be modified or is larger than 5 in: Windows Start Menu, Recent documents, Adobe PDF recent documents, Adobe Photoshop, All Office suite programs...
It's just weird that there's only 5 for a program intended for the kind of people that work on projects somewhat larger in scope than "hey, we took the dog to the park the other day".
@Jerry Klaimon - not sure what version of Premiere you're using, I'm using CS6 with Production Premium CS6. Recent files only shows 5. Photoshop shows 9. For my current workload, I'd probably want 10-12 and it would be nice if they could go to 20 or more IMHO. Look at History states. History states default to 20. I usually set this to 35 whenever I set up any user's computer. It's easy to choose what suits me from the preferences menu. I don't see why they wouldn't have the same idea for 'recent files'
@anyone who thinks I'm stupid - please feel free to insult me. A forum scuffle is often a great way to get the attention of moderators who might be in a position to pass this idea on to someone who could do something about it. I'm also anal, stubborn, holier-than-thou and not-as-smart-as-i-think-i-am if you want some ideas to get started .
@Steven Gotz - you are quite correct that asking is important. Probably a smarter thing to do before pestering the devs with feature requests is to thoroughly check to see if it is in fact already existing. Adobe products are famous for having features that nobody knows about. Most of the questions I have that Google or Lynda.com didn't answer have been answered here in the forums. Then once I've seen that a few hundred pairs of eyes sharper than mine have also come up with nothing, then perhaps it might be worthwhile sending in a feature request. In this case, I will probably toss a feature request in later, but I'll probably just use your idea of keeping a master project folder with shortcuts.
@MarkMapes - I do not have a problem loading files. Project files load just fine for me. But I have one project file that has a problem that loads a HUGE amount of RAM and takes nearly 20 minutes to open. It even takes almost 8 minutes to close it. It was acting as my master file with everything nested in sequences and I needed to spend a whole afternoon to pull those sequences out using copy-paste because bringing them in via Import Sequence brought the problem into the new file. I would file that under "glitched save files" rather than "slow loading".
@Jon-M-Spear - good idea too - although I did cringe a bit at the suggestion of putting things on the desktop. I have bad habits and I work very hard to try to make other people who have worse habits in this company to try to get them to not keep anything on the desktop. In fact, it's probably my favorite thing about Windows 7 that you can have a clear or nearly totally clear desktop.
Thanks for your comments folks.

Apple's Camera Compatibility list

I am wondering if anyone knows what this list means. This is how Apple words this:
Camera compatibility
Aperture supports digital cameras from a wide variety of manufacturers. It offers optimized support for the RAW formats of the numerous digital SLR cameras.
See our updated list
Once you click on the link you get a list of "the numerous digital SLR cameras". As I noticed that my Fuji Finepix S2 Pro is on the list, I assumed that my camera is fully supported in what is advertised as a Professional program that organizes RAW images. Well... after paying $600CAN, Aperture acknowledges my RAW files as an unsupported format. I don't know why considering Photoshop can see them. When I went back to make sure my camera was on the list, I noticed that only about a dozen have a graphic behind them that says RAW. There is no explanation on the page on what this graphic means. Are they implying that raw is only supported on those select few cameras. If so I've been mislead
I based my purchase on the wording Apple used to describe this list
"It offers optimized support for the RAW formats of the numerous digital SLR cameras.
See our updated list"
Am I wrong here or does this say that if your camera is on this list, you will get optimized support for RAW

Thanks for you reply sam. I never saw that 2nd list you mentioned. I would have assumed that the list I read on the order page was good enough but I guess I was wrong. I just assumed that a supported camera meant that you can use the most prominent feature of the product "RAW workflow"
I guess my next question is what does supported camera mean?
I think Apple better make this more clear or they are going to be taking in a lot of returns. I just checked the box out and it doesn't mention camera compatibility anywhere. Just that you get a RAW workflow. Last time I checked it wasn't compulsory to check out a website before buying a product. If someone comes in a store off the street and purchases based on the boxes info, people will have every right to return the product.
For me. I guess it was my fault for misinterpreting the list and I will eat the $600 I wasted, however, this has left me with a very sour taste in my mouth.

2 sweepstakes I have played for months are not allowing me to submit my form Microsoft Office IW/Sour Patch IW.Says on the bottom left javascripts form "0" this just started today. Internet Expl let's me play but my games are on Firefox. Plz advise.

played both after midnight last night (sour patch kids IW & microsoft office instant win). microsoft office just does nothing when I hit enter & sour patch let's me fill in my email & password then does nothing when I hit enter. I have played both for months. on the bottom left corner as I keep hitting enter it indicates "javascript forms zero & something else. it goes away when I stop hitting enter. I then exited firefox and went to the explorer and then facebook and both games let me in. Please help as all my games and sweeps are listed on firefox. thank you.

Just an update... A rep contacted me and we did a screen share. They were convinced that I wasn't full of <insert proper word here>. They promised to get back to me in a few days, and now? A few months later? Nothing.
Still no files. Still no correction... Still no nothing from Adobe.
The person I spoke to was kind, saying he'd make sure I got CC for free for a while...
Still though, no follow up.
Adobe, are you going to correct this or just let your customer suffer at your mistakes?

Billing Due List is Empty in CRM

Dear All,
There is nothing on the Billing due list after I completed u201Crelease for billingu201D for service confirmation without any error prompted. Does anyone have any idea?
And Iu2019ve done the following configuration for billing.
1. Defined billing unit BP and assigned to corresponding sales area.
2. Defined item category in the service confirmation type to be 'Billing relevant' u2013 set Billing Relevance to u201CTransaction Related Billing After Completionu201D, Intercompany Billing to u201CVia CRM Billingu201D
3. Assigned a combination of the business transaction type and the item category of the relevant CRM business transaction to an item category in CRM Billing.
Thanks,
Ken

Hi,
Thanks for your prompt response. I have crosschecked the settings you mentioned..
These settings maintianed Correctly..
i.e. we have our own
1) Billing Type for application CRMB : zCPA to which our pricing procedure is assigned.
2) Billing Item Category: CPAR which is already assinged to the Billing Type maintained earlier.
3) Determination of Billing Engine Item Category: where i have already assigned the soure transaction categorg, Source item category to the Billing Item Category...
These steps seems properly Configured...
Any Futher Advice...
Thanks & Regards,

Billing Due List is Empty... please response promptly

Hi all,
I am customizing the Service senario in CRM 2007. After releasing the service confirmation normally
the service confirmation document shall be displaying in the Billing due list. But in my case i dont get
it.
I have cross check it in the transaction item category of type SVCP, Billing relevance indicator is set to "Billing after contract release" and Int. Billing is set to "A CRM Billing".
Do i miss some other setting ... Please do advice..
Waiting for your prompt responses.
Regards,

Hi,
Thanks for your prompt response. I have crosschecked the settings you mentioned..
These settings maintianed Correctly..
i.e. we have our own
1) Billing Type for application CRMB : zCPA to which our pricing procedure is assigned.
2) Billing Item Category: CPAR which is already assinged to the Billing Type maintained earlier.
3) Determination of Billing Engine Item Category: where i have already assigned the soure transaction categorg, Source item category to the Billing Item Category...
These steps seems properly Configured...
Any Futher Advice...
Thanks & Regards,

Listing applets on the card

hi,
I am trying to list the applets present on the card. But, I am getting the following error mesg. The source code is also pasted below.
C:\J2SDK1.4.0_03\BIN\java.exe ReadFile
initializing file...
Before start
After start
After Card request
[INFO     ] opencard.core.service.CardServiceRegistry.getCardServiceClass
--- message no CardService for interface opencard.opt.applet.mgmt.AppletAccessCardService
--- thread Thread[Thread-1,5,main]
--- source opencard.core.service.CardServiceRegistry@422ede++ registered factory opencard.opt.util.PassThruCardServiceFactory@3c5982
[INFO     ] opencard.core.service.CardServiceRegistry.isCardRequestSatisfied
--- message requested CardService class interface opencard.opt.applet.mgmt.AppletAccessCardService not supported for opencard.core.terminal.CardID@820dda ATR: 3B 75 94 00 00 62 02 02 02 01
--- thread Thread[Thread-1,5,main]
--- source opencard.core.service.CardServiceRegistry@422ede++ registered factory opencard.opt.util.PassThruCardServiceFactory@3c5982
[INFO     ] opencard.core.service.CardServiceRegistry.getSmartCard
--- message CardRequest opencard.core.service.CardRequest@186fab NEWCARD
service = interface opencard.opt.applet.mgmt.AppletAccessCardService cannot be satisfied with opencard.core.terminal.CardID@820dda ATR: 3B 75 94 00 00 62 02 02 02 01
--- thread Thread[Thread-1,5,main]
--- source opencard.core.service.CardServiceRegistry@422ede++ registered factory opencard.opt.util.PassThruCardServiceFactory@3c5982
The source code:
import opencard.core.service.SmartCard;
import opencard.core.service.CardRequest;
import opencard.opt.util.PassThruCardService;
import opencard.opt.applet.BasicAppletCardService;
import opencard.opt.iso.fs.CardFile;
import opencard.core.terminal.*;
import opencard.opt.applet.mgmt.*;
import opencard.opt.applet.*;
public class ReadFile {
     public static void main(String[] args)
          System.out.println("initializing file...");
     try {
          System.out.println("Before start");
          SmartCard.start();
          System.out.println("After start");
          // wait for a smartcard with file access support
          CardRequest cr = new CardRequest(CardRequest.NEWCARD, null, AppletAccessCardService.class);
          System.out.println("After Card request");
          SmartCard sc = SmartCard.waitForCard(cr);
          System.out.println("After waiting for card");
     AppletInfo [] templates = null;
     try {
     AppletAccessCardService aacs = null;
     aacs = (AppletAccessCardService)
     sc.getCardService(AppletAccessCardService.class, true);
     templates = aacs.list();
     } catch (Exception e) {
          sc.close();
     catch (Exception e)
          e.printStackTrace(System.err);
          System.exit(0);
     finally
     { // even in case of an error...
          try {
               SmartCard.shutdown();
          catch (Exception e)
          e.printStackTrace(System.err);
     System.exit(0);
It would be of great help if anyone has code for reading list of applets from the card. We are using CyberFlex egate card and Reflex V2 USB reader.
Thanks
Nagesh

JoesephSmith (and DurangoVa, if your still around),
Please excuse my previous posts. I was in a sour mood when I wrote them, born out of frustration with trying to get answers from this list and the internet in general.
JS, I have no personal problem with you at all. You were in the wrong place at the wrong time:
I had been searching for answers to my query about AppletAccessCardService implementations for a few hours. No information on the OCF site. Little or no information here. During my searching, a great many posts with similar questions came up and, it seemed, the answer that seemed to come up was "RTFM" or "Do a search, this has been answered a million times" (yet the original answer never seemed to appear in the search). While I admit in some instances, this kind of answer might have been correct for that particular user, it wasn't helping me solve my problem. Many years on Slashdot, K5 and IRC has really made me despise that saying -"RTFM". I was upset that the OCF would publish a "Programmers Guide" with sample code that cannot possibly be run or used and I was upset that I could not find the appropriate information on the JavaCard forum here at Sun. A bad day all around.
Then I came upon this post and the other that you responded to and I just flipped. Sorry about that. Let's try this again:
While I agree that you cannot list applets without using the GP/OP to do an xauth first, knowing that will not help this individual in this instance. This particular error is caused not having an AppletAccessCardService implementation configured in his opencard.properties file. Without obtaining the proper card service, he cannot get a handle on the smarcard object or a handle on the cardchannel to which he will need to send the xauth commands, then the applet listing commands. So knowing how to do xauth according to GP won't help him if he can't send the commands to the card.
I would suggest that he forget about the AppletAccessCardService, since there doesn't seem to be an implementation of it around, and use the PassThroughCardService instead. This is a little more low-level than the OCF applet packages (he will have to work directly with APDU commands instead of a wrapper class), but at least he can xauth and list with this one. And as you said JS, you must learn how to do the xauth <i>properly</i> first or you will bugger your card.
I hope this is a more appropriate response.
I hope this makes up somewhat for my poor behaviour the other day.
Be well.

Ajouter ligne dans table ou liste multicolonnes

Bonjour
Je découvre Labview (version 8.6) et je tente de créer un programme d'asquisition de données pour un banc d'essai amortisseur.
Je receuille des données et les classes dans un tableau, ET cré un graphe XY pour afficher une courbe représentant la force de l'amortisseur en fonction de la vitesse de déplacement de la tige. Jusqu'à là tout va bien!
Mon problème est que je voudrai que lorsque le cycle s'effectue en continue, les nouvelles données s'affiche sur la ligne suivante au lieu d'écraser les précédentes valeurs comme c'est le cas actuellement .J'ai essayé avec l'outil "table" et l'outil "liste multicolonnes" mais le problème est le même: Comment dois-je faire?
Il se trouve que j'ai le même problème pour afficher les courbes sur mon graphe XY, j'aurais également besoin d'aide pour ce problème.
Merci par avance pour votre attention et votre aide.
Cordialement
Jérémy
PS: Si joint mon VI pour imager le problème.
Solved!
Go to Solution.
Attachments:
PETIT BANC.vi ‏254 KB
Essais Petit banc.doc ‏25 KB

Bonjour Jérémy,
Vous trouverez en pièce jointe, encore quelques petites modifications sur votre VI pour vous montrer comment utiliser les fonctions tableau pour créer des tableaux an ajoutant des éléments à chaque itération de la boucle.
Vous verrez, si vous activez l'aide contextuelle (CTRL+H) et que vous placez votre souris sur le graphe XY sur votre diagramme, il est expliqué comment câbler l'entrée du tableau si vous voulez une seule courbe ou plusieurs courbes. Dans le cas de plusieurs courbes, il faut un tableau donc chaque élément correspond au tableau 2D (X et Y), c'est ce que je fais lorsque je viens ajouter les données dans le tableau.
Ensuite, pour que Word ne s'ouvre qu'après la boucle d'acquisition, il faut savoir que LabVIEW utilise le principe du flux de données, n'hésitez pas à regarder l'aide de LabVIEW pour comprendre ce principe. Et cliquez sur le bouton "Animer l'exécution", c'est très pratique pour bien comprendre comment les fonctions s'exécutent.
Le flux de donnée dit qu'une fonction ne peut s'exécuter que lorsque toutes ses données en entrée sont disponibles. Et ses données ne sont disponibles que lorsque la ou les fonctions qui les génèrent ont fini de s'exécuter. Il faut également comprendre qu'une boucle est vue comme une noeud, et que les données qui sont générées par cette boucle ne seront disponibles que lorsque la boucle sera arrêtée.
Dans votre cas, la fonction qui insère les données du tableau, généré par l'acquisition, dans Word doit attendre que la boucle soit terminée. En revanche, la fonction d'ouverture de Word ne dépend pas de la boucle While, donc s'ouvre dès le début.
Pour pallier ce problème, vous avez 2 solutions. Soit utiliser une structure séquence, ainsi, le code qui sera dans la 2eme étape ne s'exécutera que lorsque la 1ere étape sera terminée. Où vous pouvez utiliser une donnée issue de la boucle que devra attendre la première fonction du Report Generation Toolkit, une utilisation classique consiste à utiliser le cluster d'erreur issu des fonctions de la boucle while, et à le câbler au cluster d'erreur de la fonction que l'on veut exécuter après la boucle. Ainsi, la fonction doit attendre que la boucle While ait fini son exécution avant de pouvoir s'exécuter.
J'espère que je ne vous ai pas perdu dans toutes ces explications.
Cordialement,
Message Edité par Olivier L le 04-29-2009 04:36 AM
Olivier L. | Certified LabVIEW Developer
Attachments:
PETIT BANC[3].vi ‏253 KB

La souris sans fils ne fonctionne pas sous Windows 7

Bonjour,
OS 10.7.3 - iMac 27 pouces neuf - Boot Camp + Windows 7 family.
1 - La souris sans fils livrée avec l'iMac ne fonctionne pas sous Windows (alors qu'elle fonctionne sous OS). Une souris USB fonctionne. Le clavier sans fils Apple fonctionne sous Windows 7.
2 - Au démarrage de l'iMac, les touches "Option" ne propose pas le choix du système (l'iMac démarre obligatoirement sur le système paramétré par défaut).
Merci pour votre aide.

Hello,
OS 10.7.3 - nine 27-inch iMac - Boot Camp + Windows 7 family.
1 - The mouse no son came with the iMac does not run underWindows (although it runs on OS). A USB mouse works. The Applewireless keyboard son runs Windows 7.
First of all make sure you have downloaded and installed the Boot Camp drivers and then used the Apple Software Updater in Windows to update them.
Got into Applications/ Utilitys/ and click on Boot Camp Assistant and you should get an option to download the Windows Support Software.
W7 has issues with Bluetooth connections for most people so you may have to do a search in these forums or Yahoo/Google a search for a more direct fix.
You need to figure out how to get it to sync or "link" with the iMac the same way the keyboard did. It may be as easy as manually reinstalling the Bluetooth drivers from the Boot Camp installer folder or maybe go into the "Device Manager" and see if the mouse is listed or not.
2 - At the start of the iMac, the keys "option" does not offer the choiceof the system (the iMac starts necessarily on the system default setting).
Thank you for your help.
iMac, Mac OS X (10.7.3), Boo
If you already installed Boot Camp then make sure you press and HOLD down the Option key at the start up chime and keep holding it down until you get to the boot screen with the different icons.
If you simply want change from Windows to Mac or Mac to Windows you can also go to System Preferences/ Startup Disk and select the OS you want and then simply restart.

Modifier "step list configuration" Teststand 3.5

Bonjour, Je voudrais modifier les "steps liste configuration" sous Teststand 3.5. Je sais que la fonction existe sour la version 2010. Je voudrais ajouter des colonnes. Cette fonction existe sous Testsand 3.5 ?

Bonjour geof31,
Je pense que les documents devraient vous aider à vérifier si les actions peuvent être réalisées sous TestStand 3.5 :
Where are my TestStand Step List Configurations Stored?
Changing Columns Properties of the TestStand Sequence Editor Execution View Window
How Can I Hide Comments in TestStand?
Adding Step Numbers to Your Sequences
Cordialement,
Jérémy C.
National Instruments France
#adMrkt{text-align: center;font-size:11px; font-weight: bold;} #adMrkt a {text-decoration: none;} #adMrkt a:hover{font-size: 9px;} #adMrkt a span{display: none;} #adMrkt a:hover span{display: block;}
Travaux Pratiques d'initiation à LabVIEW et à la mesure
Du 2 au 23 octobre, partout en France

Soure list

Similar Messages

Maybe you are looking for