Sowtware licenses lost after microSD replacement

Got my new E72 with preinstalled software along with T-Mobile 2-years abonement . Recently, I have changed my micro SD card into the larger one and copied there all the data from the old card. After that, licenses for all pre-installed programs including GPS have ben lost and now each program is asking to enter new unlock codes. Otherwise there is just a trial for 14 days. The problem is that when I've got my new phone, all the software has been already installed so I do not have any registration codes at hand. Tried to rename the card in the same way as previous one has been named but it did not help. Would appreciate to receive registration codes for all pre-istalled software on Nokia E72. Contacted T-Mobile support and they proposed to contact Nokia directly as they do not have any license codes.

Hi sveritchev
Welcome to the forum!
As a user-user forum we cannot assist you with this issue as you would need to use the "Contact us" link in your region.
For future reference did you enable "Show hidden & System files" on your PC prior to copying microSD which is essential?
Happy to have helped forum in a small way with a Support Ratio = 37.0

Similar Messages

IWeb files lost after HD replacement?

First off, I'm $tuck with very old HW/SW, per the equipment profile below. Cannot advance beyond my current iLife 08.
Recently replaced a failing internal hard drive (6 yrs old), and did a clean install of software, except for iWeb which I backed up multiple times. I thought I had adequately archived the iWeb folder on externals. Afterwards I launched iWeb, and got a prompt to re-install iLife 08. After I did that, it wasn't a surprise to me to see that the website I'd created years ago was no longer accessible on my Mac (unless it's hidden somewhere; I am NOT iWeb-savvy).
The good news is that the webhost that I'm using after the closure of MobileMe has the current file captured, and is showing properly online.
But it appears that if it ever needs editing, I'll have to build it all over again from scratch.
Am I assessing this correctly?
I'm willing to accept that I've botched the capture of my website, but I wonder if this was even doable at all? If only for information, what could I have done differently to retain the website for editing, in the midst of a hard drive replacement?
Or is it actually still possible to retrieve it as it stands?
Thanks in advance.

To find an iWeb domain file:
First you need to find the file where iWeb stores its information. iWeb stores its information in a file (or package) called Domain.sites2 (by default but can be changed). Note that the extension .sites (iWeb 1.0) or .sites2 (iWeb 2.0 and 3.0) may be hidden, hence it could also be called Domain only.
To find a Domain file it's best to use a freeware application called Find any File since Spotlight doesn't search everywhere. Once you downloaded and installed the application type ".sites" (without quotes) into the search field of Find File and it will list all the Domain files of all iWeb versions on your computer.

Audiobook license lost after resetting with pin my Zen V plus that was fro

i've had my zen v plus?3 mos. it has locked up about 6 times, and i reset with a paper clip in the small hole. this last time i had 5 netlibrary audiobooks on it. all licenses were ok, and i had listened to 2 of the books. after i reset after a lockup this time, the books were still there, but?i got the msg "no license to play..sync license from pc" on all of the books. all firmware and updates are current. why is it doing this?

Whoops--I fixed it...lol!!? I just reset it, and then held down the power & the play buttons at the same time and then cleaned it up, and rebooted it. I looked it up somewhere else on this forum, but thanks anyways guys!?

Nokia Maps subscription info lost after firmware u...

anyone tell me why my maps software has lost the subscription data for navigation - only 10 months used, lost after recent firmware update- dont want to pay again but it keeps asking me to when I want to navigate

Hi wadders
Which phone model on what firmware version are you using?
In Nokia Maps > Options > Extras > My Licenses - what result do you get?
Happy to have helped forum in a small way with a Support Ratio = 37.0

Vendor Open Item Was Not Offset After a Replacement Check

Hi FI Guru,
We have an issue with vendor replacement check. Our vendor open item still apears in FBL1N after a replacement check is paid. We initially issued a check against a vendor invoice and we had to void that check because due to check printing problem.   The check was cancelled in FCH8. We then issued a replacement check in F110. When I displayed open items for the vendor in FBL1N, the vendor invoice still showed up. The replacement check already sent to our vendor. So we have to apply the payment to the vendor's invoice. It seems the second transaction (for the replacement check) is incomplete because I dont't think it hits our bank account.
Here are my questions:
1) Is there another transaction our user needs to offset vendor invoice?
2) If we have to fix it manually, what is the best option to offset the open vendor invoice and still be able to hit our bank account.
Any help is appreciated.
Thanks!!
Reiling

Hi,
In order to change the Open Item Management for a G/L account using
ZFSEPA02 the line item total(Total of open items)for this account
should match/tally with the account balance for this account (FS10),
otherwise the open item activation will not be possible.
Unfortunately as per note 175960 you find reports RFSEPA02/ RFSEPA03
are no longer supported as of release 4.5A.
ALTHOUGH you can find a possible solution on how to tally the line items
to the balance in the NOTE 403744.
1. Active New General Ledger
         This note applies ONLY WITH RESTRICTIONS to Release ERP 2004 or ERP
         2005 with activated New General Ledger and activated document
         splitting.
         In these releases, it is not currently possible to subsequently
         activate the open item management under the specified conditions.
         The only option currently available is to set up a new account with
         open item management and to use this instead of the original
         account.
         However, it is also possible to deactivate the open item management
         using report ZFSEPA03 under the prerequisites described below.
     2. Migration to the New GL:
         If you are planning to migrate to the new General Ledger using a
         migration type that enables the use of document splitting, ensure
         that in Phase 1 and Phase 2 NO changes are make to the open item
         management. Phases 1 and 2 indicate the period between the migration
         date and the end of the actual migration (the "Migration Completed"
         indicator is set)

Handoff does not work after phone replacement.

Dear all,
I'm using iPhone 6 and Macbook Pro Retina 2014 mid and getting some trouble with using continuity on Yosemite.
Before I use iPhone 5s 16G(IOS 8.1.1)when it was not thrown to the water , continuity does work so well. But after that, replacing it for iPhone 6, it does not.
I think it could be happen since my previous iPhone 5s cannot be logout from iCloud but i don't know why exactly.
so could you give me some advice for fixing it?
I'm currently using iPhone 6 (64G)with IOS 8.1.1 (12B436) and Macbook Pro Retina 15" with OS X Yosemite 10.10.1(14B25)
and I also tried to solve this problem with logout/in from iCloud and handoff off/on, rebooting both devices but failed.
The only working function of the continuity is SMS sync.
Could you please help me solve this problem?

I thought I'd post you a quick response because you described exactly the issues I was having. After my phone was idle for a while, my iPhone would refuse to get data over 3G.
I've tested this thoroughly and I'm able to "trip up" the phone into a state where it can't download data from the 3G network. But turning airline mode on for about 30 seconds then off again resets forces a renegotiate with the cell tower/3g and everything seems to work again about a minute later.
Nothing untoward listed in the console at this point either - The PDP context that you mentioned that was deactivated was more than likely the Internet Tethering. (It's usually PDP context 1, by the looks of things).
I think I might switch off 3G and see if that helps until Apple fix this issue. It is related to the wifi issues that others have reported - As I've seen my iPhone unable to download information via 3G if wifi is turned on, but you don't connect to a wifi network. But I can't seem to reproduce this reliably.
-Soen

Hyperlinks from other placed indd documents or pdfs getting lost after export to PDF

after upgrade vom CS 5.5 to CS 6: hyperlinks from other placed indd documents or pdfs getting lost after export to PDF
I tried all options for the as well known and working export options

after upgrade vom CS 5.5 to CS 6: hyperlinks from other placed indd documents or pdfs getting lost after export to PDF
I tried all options for the as well known and working export options

How can I get my music from my Itunes library after I replaced my hard drive?

How can I get my music from my Itunes library (purchased and downloaded (CD)) after I replaced my hard drive? Same account name. My other computer see's old and new music. Can purchace new songs. They show up by themselves. Can connect IPOD and old songs show up. Seem's like they are defined as different accounts.

They will only be where you put them.
It has always been very basic to always maintain a backup copy of your computer. Use your backup copy to put everything back.

How much $$$ will Verizon charge me if I don't return the Fascinate after receiving replacement?

How much $$$ will Verizon charge me if I don't return the Fascinate after receiving replacement?
I spoke with customer service and couldn't get a real number. She just said it "could be up to $500, or more"
to be determined after they don't receive it within the 5-day period.
Is there a way to find out for sure how much it's going to cost?
Thanks!
Here's the reason I'm asking:
I forgot to drop it off at FedEx on the way to the airport. My entire family is now on an overseas trip and won't
be back for 8 weeks. The Fascinate, packed in Verizon box with FedEx box, is now sitting in my car trunk at
the airport long-term parking lot. I was supposed to stop by the FedEx office at the airport cargo area to drop
it off, but forgot about it during the rush.... (yes, I do realize it's a stupid mistake that may end up costing a
lot of money)

Hi and good morning!
I would like to review your account with you and ensure I can help resolve any concerns you have about being charged for this device. Please PM me directly so we can discuss this together. Also, include your name and mobile number with your PM to me.
Thank you so much and have a safe overseas trip!

I am unable to redeem my purchase of a Photoshop Elements 12 software license. After entering the redemption code and clicking on the Redeem button, nothing happens. No error message. Screen does not change.

I am unable to redeem my purchase of a Photoshop Elements 12 software license. After entering the redemption code and clicking on the Redeem button, nothing happens. No error message. Screen does not change.

try using a different browser, or contact support Contact Customer Care

AIR-CT5508-K9 License gone after upgrading to 7.4.100.0

We have a wierd issue with our 5508 WLC which has a AP base count of 250.
right now we're running code version 7.4.100.0 with 75 active AP's connected
The license details:
I tried twice to upgrade to code version 7.5.102.0 but in both cases the base license disappeared after the upgrade as you can see:
(Cisco Controller) >show license all
License Store: Evaluation License Storage
StoreIndex: 0 Feature: base-ap-count                     Version: 1.0
        License Type: Evaluation
        License State: Active, Not in Use, EULA not accepted
            Evaluation total period: 8 weeks 4 days
            Evaluation period left: 8 weeks 4 days
        License Count: 500 / 0 (Active/In-use)
        License Priority: None
(Cisco Controller) >show license udi
Device# PID                     SN                      UDI
*0      AIR-CT5508-K9           FCW1526xxxx            AIR-CT5508-K9:FCW1526xxx
(Cisco Controller) >show license file
License Store: Evaluation License Storage
Store Index: 0
    License: 11 base-ap-count 1.0 LONG TRIAL DISABLED 1440 DISABLED STANDALONE
              ADD 500_KEYS INFINITE_KEYS NEVER NEVER NiL SLM_CODE DEMO NiL NiL
              Ni NiL NiL 5_MINS NiL MdJd10O,mtIZ6NbE6Wz4L7mlRpB1ORkKam6zeH6MTA
             f:ANiieo1Z<---cut--->5lF03hp
             csLJVYkat3KCLOPYJNrPo3H6kt5cbt8q4XJ46naeRqwInXo3s+nsLU7rOtdOxoIxY
             ZAo3LYmUJ+MFzsqlhKoJVlPyEvQ8H21MNUjVbhoN0gyIWsyiJaM8AQIkVBQFzhr10
             GYolVzdzfJfEPQIx6tZ++/Vtc/q3SF/5Ko8XCY=</WLC>
    Comment:
       Hash: 4RHF2Mhn<---cut--->w3KFoVG4=
therefor we're unable to connect AP's anymore.
did not find any bug related to that issue or any information in the releasenote which could explain that behaviour.
any ideas?

Thanks that helped me out. I contacted cisco license team and they sent me a custom license file.
Manufacturer's Name.............................. Cisco Systems Inc.
Product Name..................................... Cisco Controller
Product Version.................................. 7.5.102.0
Bootloader Version............................... 1.0.16
Field Recovery Image Version..................... 7.0.112.21
Firmware Version................................. FPGA 1.7, Env 1.8, USB console 2.2
Build Type....................................... DATA + WPS
System Name...................................... xxxxx
System Location.................................. Zuerich
System Contact................................... xxxxx
System ObjectID.................................. 1.3.6.1.4.1.9.1.1069
Redundancy Mode.................................. Disabled
IP Address....................................... xxxxx
Last Reset....................................... Software reset
System Up Time................................... 0 days 0 hrs 7 mins 19 secs
System Timezone Location......................... (GMT +1:00) Amsterdam, Berlin, Rome, Vienna
System Stats Realtime Interval................... 5
System Stats Normal Interval..................... 180
Configured Country............................... CH - Switzerland
Operating Environment............................ Commercial (0 to 40 C)
--More-- or (q)uit
Internal Temp Alarm Limits....................... 0 to 65 C
Internal Temperature............................. +43 C
External Temperature............................. +26 C
Fan Status....................................... OK
State of 802.11b Network......................... Enabled
State of 802.11a Network......................... Enabled
Number of WLANs.................................. 4
Number of Active Clients......................... 8
Burned-in MAC Address............................ 30:F7:0Dxxxxxx
Power Supply 1................................... Present, OK
Power Supply 2................................... Present, OK
Maximum number of APs supported.................. 250
(Cisco Controller) >show license all
License Store: Primary License Storage
StoreIndex: 2 Feature: base                              Version: 1.0
        License Type: Permanent
        License State: Active, Not in Use
        License Count: Non-Counted
        License Priority: Medium
License Store: Primary License Storage
StoreIndex: 3 Feature: base-ap-count                     Version: 1.0
        License Type: Permanent
        License State: Active, In Use
        License Count: 250 /250 (Active/In-use)
        License Priority: Medium
License Store: Evaluation License Storage
StoreIndex: 0 Feature: base-ap-count                     Version: 1.0
        License Type: Evaluation
        License State: Inactive
            Evaluation total period: 8 weeks 4 days
            Evaluation period left: 8 weeks 4 days
        License Count: 500 / 0 (Active/In-use)
        License Priority: None
--More-- or (q)uit

After i replaced hard drive my bluetooth disappeared where can I find it?

After i replaced hard drive my bluetooth disappeared where can I find it?

If you are talking about the bluetooth software (to connect devices) then you can download it here!

Problems after motherboard replacement

Hello,
My PXI system consists of PXI-1045, PXI-8360 and five NI PXI intruments (5152, 4065, 6552, 2532, 5404). I was working with this system without problems for a long time. However, the motherboard of my PC had a specific problem with the ethernet connenction and I decided to replace the motherboard with a new one (same model). After the replacement (the pc finally was fully functional), I tried to power on the PXI chassis, but I couldn't "see" any module in PXI chassism, using
the MAX. I must tell thatI didn't change the hard disk of the pc, or anything else just the motherboard.After some experiments, I finally fix the probrem with the following solution: First I unplugged all the modules from PXI chassis. After that, I plugged one module and I reboot the pc. After that I plugged the second one module and I reboot the pc. And so on...
This was the only solution that I found in order to indentify all the modules of the PXI chassis.
My question is why happend this thing? Where are the PXI modules' adresses stored? Also, is the procedure I used correct, or I had to do something else in order to make the system work?

Hello George,
you might want to consider posting this question in a more hardware based forum - the problem does not seem to be related to CVI.
Good luck

User Settings lost after session is released

I am having a problem with the User settings being lost after the user logs off the system.
menu settings, fields displayed in Marketing Documents, displayed User Defined fields and the
sequence of User defined fields get lost after the session ends. This does not happen to all users,
just some users. The users that keep losing their settings keep losing their settings, the ones that do not have a
problem seem never to have a problem.
has anyone else experienced this problem and if so, how has it been resolved?
Thanks in Advance!!!
Dana

Dana,
You may check these threads first:
change in form settings
Re: Settings don't seem to "stick" after being added from the Form Setttings
Re: 2007A PL42 and Windows Roaming Profiles
Form settings not saving
Thanks,
Gordon

Windows 2008 R2 OEM to Volume License change after p2v.

Did online search and even called Microsoft licensing, got very confusing and different answers. So posting here.
P2V'd a HP server running 2008 R2 Standard (64 Bit) , everything went smooth, after 2 weeks server is giving "Build 7601, the copy of windows is not genuine. The Product ID reads : 00XXX-OEM-8XXXXXX-1XXXXX
Our company does have volume license keys and my understanding is that we need to give one to this server. Can I just change product key and activate using new volume licensing key ? or do you I need to do a repair- as I read in most cases with win2003.
Called MS:
1st Support Agent : Go ahead, change product key, reboot and give us a call to reactivate.
I asked for another confirmation and was transferred to tech support
Tech Support: Give us your name, number etc., we need to open a ticket, charge $259 or let me transfer you to volume licensing.
2nd Support Agent: We recommend a clean install for any volume licensing changes. Kept repeating it x 10.
me: This is a production server, I cannot do that, its too late, sorry.
he: Ok, then go ahead and try to change the key and see if it works.
me: would it break anything or any risk
he: Not sure, as we recommend a clean install is recommended for any Volume License.!
Please advise if anyone has come across upgrading OEM to Volume after p2v. thanks

Hi Karma,
For the license issue after P2V, the thread may be helpful for you:
Licensing OEM servers after P2V
In addition, if you have further concerns about licensing, I still recommended to contact
Microsoft Licensing specialist for better assistance.
Best Regards,
Anna Wang
Thanks for your suggestions. But the threads are too long to read for a simple problem with a simple solutions.
Here is the solution for anyone looking, Please check you license key sticker and there should a Virtual Key just below the OEM , use that key after migration. and you are GOLD!
Unfortunately, two of the Microsoft Licensing Specialist I spoke to, had no clue about this.

Sowtware licenses lost after microSD replacement

Similar Messages

Maybe you are looking for