SP 12 upgrade and script logic issue

Hi All,
We upgraded to BPC 10 SP 09 to SP 12. The system was stable for some days but after 15 days it seems like script logic has got corrupted.
Please find the images below, Any ideas what is the problem

Hello,
Please clarify what you mean by copy, did you copy the script (text) from one open client session to another or did you use back up and restore to copy the environment or any other method.
I recommend checking if this is a client or server side problem. You can verify this either by opening the logic on a different client machine or by checking the logic directly on the server using UJFS.
If this has occurred on the server level I recommend just rewriting the content, through BPC web client, validate and save again and check if that fixes the problem or if the problem occurs again.
Best Regards,
Leila Lappin

Similar Messages

SAP BPC 5.1 Script Logic Issue

Hi Guys,
I have a problem with Inventory Days script logic at the moment. Basically what the logic should do is:
1. Copy the required data across to a calculation category (SQL)
2. Calculate the last 12 months Cost of Sales for every entity in the selection for 3 years (MDX)
3. Use the Cost of Sales number and multiply it with the inventory days number (SQL)
The calc works fine for some of my smaller brands (200 - 500 entities), but when i run the logic for my big brand (2000 entities) the last step doesn't calculate correctly. I have done the following to try and fix the problem.
1. Every step has it's own COMMIT
2. I clear the data before writing anything
3. I use XDIM_MAXMEMBERS Entity = 500
Any ideas why the logic is acting like this? I don't know if I am allowed to post my code here, but if it will help i will
Regards,
Andries van den Berg

Hi,
I only sent you the step that is giving me a problem at the moment. I broke the logic up into different packages to check where the problem lies and narrowed it down to this one.
It seems like the code didn't copy across correctly, it is supposed to be when EXTRAP.BRAND "<>" "". I'll just paste the code again, just so that we are all on the same page.
Regarding the FAC2, the client was running the code a lot of times and the WB table was getting huge. So, i started posting the records to the FAC2 table and processing it in the SSIS package. And i did confirm that they are posting there.
I just tried to run the script for half of the entities and it didn't work. I then tried to run is for 25 entities and it worked. Could the *XDIM_MaxMembers Entity = 50 be giving me the problem? This is all i get over and over in the formula log:
RPTCURRENCY,ACCOUNT,CATEGORY,DATASRC,ENTITY,INTCO,TIME,SIGNEDDATA
LC,80500,BUDGET,INPUT,P71559,NON_INTERCO,2010.AUG, 0
The other thing that bugs me is that i have similar script that never gives me issues for the same client.
Regards,
AvdB
//Step 4 -- Calculate the Inventory per month for all the entities selected
*SELECT(%BUDGET_YEAR1%,"[BUDGET_YEAR1]","CATEGORY","[ID]='BUDGET'")
*SELECT(%BUDGET_TIME_SET1%,"[ID]","TIME","[YEAR]=%BUDGET_YEAR1% AND [CALC] = 'N'")
*SELECT(%BUDGET_YEAR2%,"[BUDGET_YEAR2]","CATEGORY","[ID]='BUDGET'")
*SELECT(%BUDGET_TIME_SET2%,"[ID]","TIME","[YEAR]=%BUDGET_YEAR2% AND [CALC] = 'N'")
*SELECT(%BUDGET_YEAR3%,"[BUDGET_YEAR3]","CATEGORY","[ID]='BUDGET'")
*SELECT(%BUDGET_TIME_SET3%,"[ID]","TIME","[YEAR]=%BUDGET_YEAR3% AND [CALC] = 'N'")
*XDIM_Memberset Time = %BUDGET_TIME_SET1%,%BUDGET_TIME_SET2%,%BUDGET_TIME_SET3%
*XDIM_Memberset Category = TOPDOWN, BUDGET
*XDIM_Memberset Entity = %Entity_Set%
*XDIM_MaxMembers Entity = 50
*XDIM_ADDMemberset ENTITY = CLKS,MUS,BS // Add global entities
*XDIM_Memberset ACCOUNT = Last12FSCoS,Last12DispCoS, InventoryFSDays, InventoryDispDays //Add the caculated CoS account from the previous step and the Global Driver for days
*WHEN ENTITY.EXTRAP_BRAND
*IS <> ""
*WHEN CATEGORY
*IS TOPDOWN
*REC(EXPRESSION=(GET(ACCOUNT="Last12FSCoS",CATEGORY="TOPDOWN")*GET(ACCOUNT="InventoryFSDays",ENTITY=ENTITY.EXTRAP_BRAND,CATEGORY="BUDGET")/365)*-1,NOADD,ACCOUNT="80500",CATEGORY="BUDGET")
*REC(EXPRESSION=(GET(ACCOUNT="Last12DispCoS",CATEGORY="TOPDOWN")*GET(ACCOUNT="InventoryDispDays",ENTITY=ENTITY.EXTRAP_BRAND,CATEGORY="BUDGET")/365)*-1,NOADD,ACCOUNT="80510",CATEGORY="BUDGET")
*ENDWHEN
*ENDWHEN
*WRITE_TO_FAC2
*COMMIT

Work Status and Script Logic

Hello, gurus!
Explain please situation with a script logic and work status of data.
I have the script logic file, with code, for example:
*XDIM_MEMBERSET UNIT = 19
*XDIM_MEMBERSET AP_TR_SA = COMMON
*XDIM_MEMBERSET C_DATASRC = MANUAL
*XDIM_MEMBERSET RPTCURRENCY = USD
*XDIM_MEMBERSET CATEGORY = PLAN,ACTUAL
*XDIM_MEMBERSET ENTITY = C1113,C1111
*XDIM_MEMBERSET TIME = 201007
[#CF0700]=([AP_TR_ACCOUNT].[CF0612])-([AP_TR_ACCOUNT].[CF0611])
*COMMIT
Work status is established for (ENTITY=C1113; CATEGORY=ACTUAL,PLAN;TIME=201007) as Approved (data is locked).
Will execute this logic for (ENTITY=C1111;CATEGORY=ACTUAL,PLAN;TIME=201007)? Should I divide this script logic for C1111 and C1113?

I have 2 entities (companies) - C1111 and C1113.
I have the script logic for calculation keyfigures for this entities (it is automatic chain).
C1113 has entered the data and has locked it. When the C1113 will enter the data, the script logic will not been executed.
I have tested it and I have received that:
the script logic has broke when system has tried to write data into database after "Error Work Status check".
If I change the line of script logic as
*XDIM_MEMBERSET ENTITY = C1111,C1113
calculation for C1111 is executed.
Best Regards,
Svetlana.
Edited by: Svetlana Kazaneva on Sep 6, 2010 1:17 PM

Win 10 Upgrade and Power Manangement Issues

I have an S230u Twist. After upgrading to Win 10 I have the following outstanding issues: The most problematic is that after the upgrade I have an issue with the unit going to sleep. Upon waking, the screen brightness resets to about 5%. It doesn't do this all the time but often enough be irritating. I've turned off adaptive brightness but this doesn't help. I've run System File Checker which made some fixes to corrupt files and this helped somewhat. Lenovo Solutions Center reports that the Power Management Software is not installed even though I 've upgraded the Power Management driver with the Win 10 version. I'm at a loss to know what to check next to fix this. The other issue concers the start menu - the "Most Used" doesn't seem to update with the Most Used programs I use (most which are on the Task Bar). Any support I can get on the Power Management issue would be most appreciated.

I spent more hours trying to resolve. Down loaded driver 355.60 Win 10 64 bit (355.60-notebook-win10-64bit-international-whql)Uninstalled current driver and software via device manager.Expanded the driver and ran setup. Performed a custom install without GF Experience. Install went through fine and rebooted after removing software.Came back up and continued install and completed with no errors. Ran device driver and confirmed driver installed. Set GoogleEarth to run with graphics processor.Everything seemed okay.Set desktop to include in notification tray and Display GPU Activity so I could see that GE was running in processorThen launched GE with 3 buidings and citties. Ran site seeing tour.Crashed after a couple of minutes with System_thread_exception_not_handled and rebooted. When it came back up I turned of to show in notification tray and turned off GPU activity.Re-Ran GE and it lasted a bit longer and then crashed with the same errorSystem_thread_exception_not_handled and rebooted. Would welcome any further help.

CRM2007 upgrade and IC webclient issue.

Hi all,
We have successfully upgraded from crm4.0 to 2007 last weekend.
However when I launch IC Webclient, it is blank. Is there something that I missed?
Also, I have applied note 1144511, still same issue.
Regards,
KG
Edited by: KG on Mar 17, 2008 7:06 PM

Hi KG,
May I know how you started the IC webclient in CRM 2007?
Are you using crm_ic transaction?
For CRM 2007, different steps have to be used.
For CRM 2007, you might have to use transaction
bsp_wd_cmpwb and component = crm_ui_frame to test.
This will start the new WEB UI with a user id has business role related to IC Webclient. The standard role is IC_AGENT.
You may have to assign it in ppoma_crm for the position using the same step as you assign a ic webclient profile, but instead, you need to assign a business role = IC_AGENT.
Hope these could do help!
Hongyan

Exchange SP2 to SP3 RU7 upgrade and any know issues with the Dialogic Gateways

We are planning on upgrading out Exchange servers from SP2 to SP3 RU7. We are currently using an Avaya phone system and have Dialgoc gate2ways between these systems to allow us to get the voice mail into the end user's mailbox as a wav file. We are using
the DMG2120's with code many years old. Has anyone had any issues or know of anyone that has had issues?

Hi,
I have checked the your question from our internal channel and did not find any related compatibility issues with the update. I also check the third-party forum but still cannot find any threads about any potential issues.
I think we can feel free to do the upgrade. If you would like to double confirm the question, you can also ask a question in Dialogic forum for more help:
http://www.dialogic.com/den/developer_forums/f/default.aspx
Note: Microsoft is providing this information as a convenience to you. The sites are not controlled by Microsoft. Microsoft cannot make any representations regarding the quality, safety, or suitability of any software or information found there. Please
make sure that you completely understand the risk before retrieving any suggestions from the above link.
Additionally, there is an article about the IP gateway partners, AudioCodes and Dialogic, to add to the list of PBXs that are tested
by Microsoft currently:
http://technet.microsoft.com/en-us/library/ee681657(v=exchg.141).aspx
Regards,
Winnie Liang
TechNet Community Support

Java upgrade and new Safari issues

Just upgraded Java (55) on my iMac and now can't swipe pages with my mouse in Safari? Anyone else having this issue?

Desktop ?
Check your settings in System Preferences > Mouse > More Gestures
or laptop ...
System Preferences > Trackpad

Upgrading and account owner issue

I would like to upgrade one of my phones online. When i press upgrade the next thing that comes up says :
The following activities are reserved for the Account Owner, the person financially responsible for the account.
Help please

I think you've found the issue in your own post. The account you are logged in with is not designated as the account owner. If that's not correct (you are the owner, and you are logged into your account), you'll need to call Verizon to have them properly designate the account owner. Each line on a family plan can have a MyVerizon login.
If you aren't the account owner, you will need to have them log in and process the upgrade from their account.

TS3899 ios 6 upgrade and yahoo mail issues.

I upgraded to ios 6 and now I am unable to log into yahoo maii from my iPad or iPhone. Any one have any suggestions?

I am having the same issue. However, I am accessing Yahoo! email via Safari and it still automatically logs me out when I use my iPhone.

Opebal script logic issue

Hi All
The below logic is used to calculate opening and closing balances.
The logic works fine for 1st month.
ex: for acct TI if i capture 2 in my first month and run the logic its posts closing bal for 1st mnth as 2 which is right
and from feb to dec it posts opening bal as 2 which is right.(we run for whole year)
But for acct To if i capture 5 in 2nd month and run the logic its posting wrong opening bal for accout chc.
for feb my opening bal should be 2. it showing as 7.
please tell me where i am doing wrong.
i cann't use calc_dummy_org.
*SELECT(%Year%,"[YEAR]","Z_Version","[ID]='BUD'")
*SELECT(%Months%,"[ID]","Z_Time","[YEAR]=%Year% AND [LEVEL] = 'MONTH'")
*XDIM_MEMBERSET Z_TIME=%Months%
*XDIM_MEMBERSET Z_VERSION = BUD
*XDIM_MEMBERSET EB_DATASOURCE = MANUAL
*XDIM_MEMBERSET EB_ACCT = CHC,TI,TO,AP,RT
*XDIM_MEMBERSET Z_CC = DEF_CC
*XDIM_MEMBERSET Z_PCC = PCC_DEF_CC
       *WHEN EB_ACCT
           *IS CHC,TI,TO,AP,RT
              *FOR %MonthCopy% = %Months%
                  *REC(FACTOR=1,EB_ACCT="CHC",Z_TIME=TMVL(1,%MonthCopy%))
               *NEXT
        *ENDWHEN

Nilanjan,
Thanks for your prompt reply as always. Somehow I was able to get this thing working, please don't ask me how. It was just a piece of bigger logic code.
I have awarded you full points..
Thx,
Rockdy

ITunes upgrade and iPod syncing issues

I opened itunes and it said there was an upgrade for it. I installed it and when I plug in my ipod, it syncs, then when I try to sync it again, it does not. on the initial opening of itunes I noticed that windows has the ipod drive listed as "G". upon syncing it disappears. I unplugged the ipod and then plugged it back in. windows again recognizes the ipod and the ipod automatically syncs when connected so it can find it in itunes. as soon as its done syncing, again it disappears from windows. there has to be a fix for this. as far as I can tell its in the itunes software that is causing this because I have not changed any drivers. any help would be greatly appreciated.

If you don't want to do manual update, theres nothing else we can really recommend. You might want to invest in a cheap External drive and put all your music on it. You can get one for 100 or less if you shop around

Distribution in script logic

Hello, all.
I'm new in BPC. Please give advice, how can we realize following logic.
We have a application Sales with following dimensions.
Account, Category, DataSrc, Entity, Department, Prodline, RptCurrency, Time
User send data to the DB in view:
Account | Category | DataSrc | Entity | Department | Prodline | RptCurrency| Time
NetSales | BUDGET | Input | Company_In | Sales | NoProd | LC | 2008.INP
Where each record NetSales, Budget, etc has no child
and user send data in view:
Account | Category | DataSrc | Entity | Department | Prodline | RptCurrency| Time
Coeficient | BUDGET | Input | Company | Sales | NoProd | LC | 2008.INP
Where Entity has 3 childs: Company_1, Company_2, Company_3.
After posting a data to Fact table, it view, is:
Account | Category | DataSrc | Entity | Department | Prodline | RptCurrency| Time | Signed_data
NetSales | BUDGET | Input | Company_In | Sales | NoProd | LC |2008.INP| -20
Coeficient| BUDGET | Input | Company_1 | Sales | NoProd | LC | 2008.INP| -0,1
Coeficient| BUDGET | Input | Company_2 | Sales | NoProd | LC | 2008.INP| -0,3
Coeficient| BUDGET | Input | Company_3 | Sales | NoProd | LC | 2008.INP| -0,6
I want to get new records in db such as:
Account | Category | DataSrc | Entity | Department | Prodline | RptCurrency| Time | Signed_data
NetSales | BUDGET | Input | Company_1 | Sales | NoProd | LC | 2008.INP| -2
NetSales | BUDGET | Input | Company_2 | Sales | NoProd | LC | 2008.INP| -6
NetSales | BUDGET | Input | Company_3 | Sales | NoProd | LC | 2008.INP| -12
Where NetSales distribute by coefficient for each Entity.
I want do something like (Account ="NetSales",Entity ="Company_1")= (Account="NetSales",Entity="Company_In")*(Account="Coeficient",Entity.Company_1) for each Company_n.
How can I write script logic for this.
Thanks

I think there are several options. The easiest option may be simply to construct a template that sends the values directly based on the input of the Coefficients and the Raw data value input of 20. Thus the input process would submit 7 total entries.
Now should you wish to have a repeatable calculation process that updates the Child entities each time either a coefficient or data input point is submit, then you could utilize script logic that was suggested in the thread as an allocation process. Otherwise, you would need to develop sets of properties and script logic for each set of requests such as:
*When Account.ID
*IS COEFFICIENT
*WHEN ENTITY.ID
*IS COMPANY_1
*REC(EXPRESSION = VALUE * GET(ACCOUNT=ACCOUNT.NETSALES,ENTITY=ENTITY.COMPANY_IN), ACCOUNT=ACCOUNT.NETSALES)
*ENDWHEN
*ENDWHEN
*COMMIT
This is not as flexible and there are many approaches that may be taken here, such as using LOOKUP statements and proeprties to manage the calculations and make them more flexible. It will just depend on how much volume there is to calculate, how many statements are required and how often the logic will need to be updated or managed based on hierarchy changes to the entity dimension. Plus, you need to test many options to determine which is the fastest approach during the send process.
Hope this helps.

Script Logic error when trying to Calculate P*Q

I am new to MDX and Script Logic and need some help.
I am trying to calculate Price * Qty. Prices are stored in an Account called Unit_Price, and Qtys are stored in Accounts as well. We have a Service property called "DRIVER" that points to the Account that holds the Q for that Service, but I can't seem to refer to it in Script Logic. So, for each Service, I want to find the corresponding Unit_Price, lookup the Driver for that service and then use that to find the corresponding Quantity. However, I'm having trouble with the portion that points to the Quantity.
Can someone please help?
This is the error that I get when I try to run it in the Logic Debugger:
"Warning no. -2147467259 reading cell 0; The hierarchy '[SERVICE.DRIVER]' was not found in the cube when the string, [ACCOUNT].[SERVICE.DRIVER],was parsed. "
Here is my Script Logic:
*MEMBERSET(%BILL_ENTITY%,FILTER(DESCENDANTS([ENTITY].[547],99,LEAVES), [ENTITY].CurrentMember.Properties("BILLED_ENTITY")="X") )
*XDIM_MEMBERSET ENTITY = %BILL_ENTITY%
*MEMBERSET(%PQ_SERVICE%,FILTER(DESCENDANTS([SERVICE].[TOTAL_SERVICE],99,LEAVES), [SERVICE].CurrentMember.Properties("ALLOC_METHOD")<>"") )
*XDIM_MEMBERSET SERVICE=%PQ_SERVICE%
*XDIM_MEMBERSET CATEGORY = %CATEGORY_SET%
*XDIM_MEMBERSET TIME = %TIME_SET%
*XDIM_MEMBERSET DATASRC = INPUT
*FOR SERVICE.ALLOC_METHOD = "PQ"
[ACCOUNT].[#16404ZZZ] = ( [ACCOUNT].[UNIT_PRICE], [TIME].currentmember) * ([ACCOUNT].[SERVICE.DRIVER], TIME].currentmember)
*NEXT
*COMMIT

1. completely uninstall all the nokia PC Suite products with this http://nds1.nokia.com/files/support/global/phones/software/Nokia_PC_Suite_Cleaner_7_1_1.exe, and also uninstall all OVI Suite products
2. reboot pc
3. download & Install a fresh copy of PC Suite
4. it will then have you download and install a new version of the software installer after you connect your e90
it should be fine after that. i had to do the same thing a while back.
re: no able to sync the calendar with ovi suite:
go to the Sync drop down and then select Sync Calendar.
hope that helps

Upgraded from 10.3.9 to 10.4.8 and now Logic wont open at all!

Upgraded from 10.3.9 to 10.4.8 and now Logic wont open at all! Im using Logic 7.1 Everything was fine till I upgraded.... Now when I click to open Logic it never gets past the startupscreen, and then I get a message saying "Logic has unuexpectedly quit" and I get an option to either close it or restart it or report it to apple, whatever option I choose freezes Logic and I have to right click it in the dock to end the program because it is not responding. Any help is really appreciated! I have wirk I need to get done! (teaches me to upgrade in the middle of a project... what a rookie mistake!)

Repeat after me...
I will not upgrade in the middle of a project
I will not upgrade in the middle of a project
I will not upgrade in the middle of a project
Especially as big an upgrade as a whole new OS!!
O.K. for starters, have you done the routine maintenance, repairing permissions, etc..?
Have you installed the Pro Application support specifically for Tiger?
Let's start there...

Itunes was working fine. Tries to install latest upgrade and get error message about an invalid character in the path "Program Files (x86)". PC, Win7, nothing else appears to be having same issue.

Itunes was working fine. Tried to install latest upgrade and get error message about an invalid character in the path "Program Files (x86)". PC, Win7, nothing else appears to be having same issue. Program still works, simply cannor upgrade.

Thanks b noir,
I tried this solution without success. After FixIt ran and didn't find a problem, either in looking for issues with "software upgrade" or "iTunes" it kindly offered to help me uninstall iTunes. I had thought of this as a possibilty but it seems to me that if you do that you lose a lot of "non-native-to-Apple" information you might have entered. I did this once and recovery was painfull. Is there a way to uninstall iTunes without losing all of that sort of thing? Any help would be appreciated.

SP 12 upgrade and script logic issue

Similar Messages

Maybe you are looking for