SP 13 and SP15 for PI7.0

Hello everybody
With respect to PI7.0,What does a service pack mean? What does it mean when they say that the service pack has changed from SP13 to SP15? And what does a patch level mean..
Thanks in advance
Ramya

Hi Ramya,
Service Pack is nothing but an executable file which has some entended functionality for the system. Suppose the current XI software has some performace issue then SAP will develop some code to enhance the existing feature which will be termed as Service Pack.
Time to time SAP keep enhancing the functionality of XI and for that they release various versions of software patches known as service packs.
Regards,
Subhash

Similar Messages

CMS for PI7.0

Hi,
I want to install CMS for PI7.0, I see only CMS guides for XI3.0, could anybody please help me where to get the CMS installation and configuration guides for PI7.0?
Thanks in Advance.....

Lou,
It is same for PI7.0 also. As far as my knowledge goes the only change is you have to download EXCHANGE DIRECTORY CMS 7.0 from service market place. Its path is
https://websmp210.sap-ag.de/swdc
Support Packages and Patches--> SAP NetWeaver >SAP NETWEAVER>SAP NETWEAVER 2004S> Entry by Component> Process Integration (PI/XI)
---Satish

Guide me for PI7.1 Certification

Dear All,
I have been working on PI7.0 from last 3 years now if i need to go for PI7.1 certification can i use help.sap as source or i need get all the Tbits which are suggested in the certification track.
[http://www1.sap.com/services/education/certification/certificationtest.epx?context=%5b%5bC_TBIT44_71%7cG%5d%5d%7c]
Please suggest i have material for PI7.0
Regards
Vijay

@Hemanth - Are you sure about ADM 100 & ADM 200 ? . Vijay was asking DEVELOPMENT ASSOCIATE track.
I am also preparing for PI 7.1 certification and confused about the study material to be used. As per my observation PI 7.1 is few additions & modifications of 7.0.
I do have the study material for PI 7.0. Are there any newer version of TBIT's (course content) based on PI 7.1 ?
Any suggestions are welcome.
Regards,
Balaji
Edited by: TeCHy b on Nov 6, 2009 5:29 PM

Automatic TO creation and confirmation for a Material document

Hi Dear All,
i am new to MM andWM.
I have to customization for auto transfer orders and confirmations for material documents what ever created with 101 movement type in Inventory Management. I have down configuration like below.
SPRO->Logistics Execution->Warehouse Management->Activities->Transfers-> Set Up Autom. TO Creation for TRs / Posting Change Notices
Double click on control data tab
Hear for my warehouse I given input like   Auto TO = 1,
                                                                         AddId = select check box.
And in Assign control tab for 101 movement type I have given input like below.
Automatic TO = 1.
TO item can be confirmed immed. = tick checkbox
Propose Confirmation = tick checkbox.
Foreground/Backgrnd = D.
After creating of Material document I am executing report RLAUTA10 in SE38.When I execute this report system showing message like TO processing finished: TR total:   17, TO created:    0, Errors:   17.
If I check header details of transfer requirements in LB03, i am not seeing Tick Mark in Auto TO Creation field.
Can any one tell me what the mistake i have down or if i need to do any further configuration. Please help me regarding this concern?
Thanks in Advance..

Dear Steve,
Thanks a lot for giving reply with what I need to do, but I am unable to see result.
I have down configuration like below even though system not processing Auto TO creation. Can you explain me if I have down any mistake below.
Click on Assign button,
Press on New entries
WhN = 900
Reference Movement Type = 101
Movement indicator = B
Movement type for Whse Mgmt = 101
TR create Transfer Requirement = X
Immed.TO Creation
Mail confirmation for background processing = 01.
GR date = 2

Need help to open and look for file by name

Hi,
Im needing help to open a folder and look for a file (.txt) on this directory by his name ... The user ll type the partial name of file , and i need look for this file on the folder , and delete it ....
How can i look for the file by his name ?
Thx =)

Hi ,
Sry ,, let me explain again ... I ll set the name of the files in the follow order ... Name_Serial_date_chanel.sxc ..
The user ll type the serial that he wants delete ...
I already figured out what i need guys .. thx for the help ^^
I used List Directory on advanced IO , to list all .. the Name is the same for all ... then i used Name_ concateneted with Serial(typed)* .. this command serial* ll list all serials equal the typed , in my case , ll exist only one , cuz its a count this serial .Then i pass the path to the delete , and its done !
Thx ^^

Hi. I am using a time capsule for few PC s. I have made 5 different account to access time capsule. but in windows when i enter account name and password for one account, i cannot access other accounts, because windows saves username

Hi. I am using a time capsule for few PC s. I have made 5 different account to access time capsule. but in windows when I enter account name and password for one account, i cannot access other accounts, because windows saves username. how can i prevent this from happenning. I really need to access all my accounts and dont want it to save automaticlly.

Why have 5 accounts if you need to access all of them.. just have one account?
Sorry I cannot follow why you would even use the PC to control the Time Capsule. Apple have not kept the Windows version of the utility up to date.. so they keep making it harder and harder to run windows with apple routers.

"securely" use one ethernet interface for WAN and other for the LAN

I am reconfiguring our dual 2.7 Intel Xserve running MacOSXServer 10.5.4, and had a question.
Is it possible (or advisable) to use en0 to perform LAN services, and then configure en1 to only allow access to very limited service. VPN, FTP, CALDAV and later Mail.
I imagine that this is possible via a firewall configuration, but first I do not know how to specify interface in addition to ports, and second I don't know how advisable this would be.
Currently I have a DSL package from ATT with 5 static IP addresses. I have an Airport Extreme set up as one of those addresses providing DHCP and NAT to the LAN. I am using the LAN ports on the back of that to bridge my three switches (2 managed [clients and oce print server 100 base-T] and 1 unmanaged [ laser printers and copier 10 base-T]).
I have the LAN based on 192.168.0.x, with the Xserve at 192.168.0.5. I have DNS configured and working (Thank you Antonio Rocco)
I have 20 LAN clients, 18 mac 1 PC and one PC via Parallels. I will have no more than 1 or 2 WAN clients at any one time
I provide AFP, SMB, Directory Services currently. As part of the reconfigure, I desire to take better advantage of the collaboration tools to provide wikis and CALDAV services. I also want to allow our employees to publish their individual calendars, so that they can subscribe to them at home, or vice versa.
I would like to configure VPN, one for me to access configurations when I am away using Remote Desktop (I have used command line to some extent, but still feel more comfortable with the GUI tools) and second for limited access to content for certain users.
It would also be very helpful for us to have a FTP site. It is unnecessary for this the be a FQDN service, sending the IP address is perfectly acceptable as we only use a service like this 10-15 times a year.
(Related but unimportant in the grand scheme, is there a way to generate a link to the FTP server that you could email that not only is a link, but also a temporary username and password?)
Thank you in advance,
Ion Webster

First, I missed a zero in the network speeds, I have two managed GbE switches that have all of the GbE capable machines connected to them, and an unmanaged GbE switch that has all the 10 or 100Base-T connections. My apologies for the mistake. That was one of the reasons I went with the GbE capable Airport to bridge the switches.
Ok, I had been leaning towards a separate hardware firewall, but here is also where there is a hole in my knowledge. Do I need to look at something like the Linksys RVS4000 which bills itself as a +"4-Port Gigabit Security Router with VPN. Secure, smart Gigabit networking for growing business"+ I would like easy configuration, as I take care of these systems in addition to my job, rather than full time. This will be the first time I have set up a VPN connection, so even though I have spent a lot of time researching the manuals, and reading Schoun Regan (Apple Training Series) I don't have real world experience here. So if I buy more hardware, I want it to be the product that will provide the protection, and also allow me to configure it so that I can get these services running. All my VPN clients are running Macs, most on an AIrport connection and have their IP ranges in the 10.0.1.x range. all but one is on OS 10.5.x so I have a fairly homogeneous set of machines to make work together.
I will review the links you provided regarding static routing, but I do believe the hardware solution is a better one, and wish to pursue it, for all the reasons you give, and that in the brief perusal of the links, it is more than I want to tackle.
As far as FTP vs sFTP, I have no preference. I simply want a way to have online storage for transfer of large files on occasion. Ideally I want a folder, or a series of folders that are accessible for my LAN users to put items in and take them out, and for my (s)FTP users to do the same
So long story short, the hardware solution I would like to purchase, I need to be able to do the following:
VPN connections for content access and ARD access ( knew about and will ensure differing IP ranges)
(s)FTP
Calendar publishing
mail(at a later time)
Thank you for your help thus far.
Ion Webster

HT204053 i accidently set up one account for i cloud and one for itunes. suggestions on how do i update this to only the one. please on how do i change my icloud to be the same as my itunes acct. thanks

i accidently set up one account for icloud and one for itunes; suggestions on how to correct this and use just one account for both.... thanks

If you want to change your iCloud ID to another existing ID you'll have to delete the account, create a new account with the other ID, and migrate your data to the new account. To do this, first go to Settings>iCloud on your phone and turn all data you are syncing with iCloud (contacts, calendars, etc.) to Off. When prompted choose to keep the data on your iPhone. (If you are syncing iWork documents with iCloud, also open your iWork apps and turn off iCloud syncing and choose to keep the documents on your phone.) After everything is turned off, scroll to the bottom and tap Delete Account. Next, set up a new iCloud account using your other ID, then turn syncing for your data (contacts, etc.) back to On. When prompted, choose Merge. This will upload the data to your new account.
This will not move your photo stream, however. If you have photos in photo stream that aren't in your camera roll and that you haven't backed up anywhere else you will need to save these before deleting the account. To do this, open your photo stream album on your iPhone in the thumbnail view, tap Edit, tap all the photos to select them, tap Share, then tap Save to Camera Roll. You can then delete the iCloud account and your photos will stay in your camera roll.

I have 2 macbooks each with an account for me and one for my wife. I use one Macbook logged in with my account and my wife uses the other Macbook only loged in on her account. We both make regular time-machine back-ups each on a separate external disk

I have 2 Macbooks each with an account for me and one for my wife. I use one Macbook logged in with my account and my wife uses the other Macbook only logged in on her account. We both make regular time-machine back-ups each on a separate external disk. Is it possible to update her account on my macbook using her external disk without overwriting my stuff on the same Macbook and vice versa?

Time Machine does not do individual accounts. It records the complete drive. So if you were to use her TM backup on your Mac it would make your Mac just like hers. Both yours and her account on your MAC.
Just copy the missing files over from her Mac to yours. If there are differennt programs on each then they would need to be installed on both.

Ok, I have two itunes library account one for the PC and one for my Mac, I have my first iphone on my PC, but i just upgrade and I would like to use my new iphone on my Mac but all of my apps and other stuff is in the first library.. How do I put my apps

ok, I have two itunes librarys account, one for my PC and one for my Mac, I use the PC for my iphone, but I upgrade my iphone and all my apps and
stuff is on the first itunes library. How do I put the apps from one iphone to the otherusing two dirffernt itunes library? please help..

Drrhythm2 wrote:
What's the best solution for this? I
Copy the entire /Music/iTunes/ folder from her old compouter to /Music/ in her account on this new computer.

One account for itunes match and one for all the rest?

Hello everybody
I was wondering how to use an Apple ID for iTunes Match and other for iCloud and backups. I found an article on the website that said that you actually can do that, but my question arises when I find out that now I only use one ID, all my apps are in there, along with my iPhone backups and stuff. So, if I create an ID for subscribing to iTM, will I lose the ability to update my apps on the old ID?
Please help!
The article is: http://support.apple.com/kb/HT4895
Cheers

I know, but I can't use my credit card on my iTunes Store account, since it's a US ID. What if I change the country of my ID? How often can I change it? I was thinking of changing it, purchasing iTM, and then changing it back... can I do that?
Thank you

HT204053 i use one apple id for icloud and one for itunes and now it wont let me since i reset my phone now i up graded to iphone 4s still the same problem

please help me fix this problem I have one id for icloud and one for itunes that i share with my husband

If the old ID is an earlier version of your current ID, temporarily recreate the old ID by going to https://appleid.apple.com, click Manage my Apple ID and sign in with your current iCloud ID. Click edit next to the primary email account, change it back to your old email address and save the change. Then edit the name of the account to change it back to your old email address. You can now use your current password to turn off Find My iPhone, even though it prompts you for the password for your old account ID. Then save any photo stream photos that you wish to keep to your camera roll. When finished go to Settings>iCloud, tap Delete Account and choose Delete from My iPhone when prompted (your iCloud data will still be in iCloud). Next, go back to https://appleid.apple.com and change your primary email address and iCloud ID name back to the way it was. Now you can go to Settings>iCloud and sign in with your current iCloud ID and password.

Can you have two Apple IDs on one IPAD? One for school and one for home?

Can you have two Apple IDs on one IPAD? One for school and one for home?
If so do you know how to do it?

It depends on what you want to do.
You could, for example, have one AppleID for iCloud backup [and therefore message syncing, notes syncing, etc] and a second one for iTunes [music, iBooks, etc].
But if you are looking for a way to flip everything between different appleIDs, then no.

At times when dragging the vertical scroll bar my computer screen oscillates up and down for some time before going blank or not responding to any clicks requiring a forced system restart. What is wrong?

Hi,
Suddenly while working with Firefox if I happen to drag the vertical scroll bar, a very abnormal behavior occurs. My screen dances up and down for a short time before either going black or getting restored but with no clicks working. The only way to resume is to force a restart of the system.
Any help would be deeply appreciated.
Thanks and Regards
Deepak

That didn't work. On trying to install a new driver I got the error the graphics driver could not find compatible graphics hardware. Is there anything else that can be done to at least prevent the hanging of the computer even if it means less features from Firefox being available?

Use external drive for both Time Machine and storage for Back to My Mac

Hi all,
I have been "a Mac" now for over a year and just keep finding cool new things that make me happy I switched. The latest thing is Back to My Mac offered with my Mobile Me account. With a rather convoluted mix of PC/Mac/iOS devices to manage - best $99 I ever spent btw...
I also have a 1TB Time Capsule that I have been using with Time Machine to back up all four of my Mac computers at home. Needless to say, the 1TB is really struggling to handle the amount of data being backed up and certainly leaves no room for anything else.
What I wanted to do was to attach a larger external hard drive via a powered hub to the USB port on the Time Capsule and use it for Time Machine backups while using the internal 1TB drive with Back to My Mac so that I can have remote access to all my data from anywhere without having to leave my computer running at home all the time in order for my laptop to "see" it when I'm away. And, yes, the amount of that data far exceeds what any level of Mobile Me subscription can offer! I should also mention that the hard drive is the only USB device connected through the hub to the Time Capsule at the moment. There are no other devices that might be "getting in the way".
I'm thinking maybe all this is asking too much without the addition of a dedicated file server (Mac Mini, perhaps - not a purchase my budget wants to make).
I understand that the Time Capsule doesn't support partitions, so I bought a Western Digital 2TB Elements drive, connected it to my Macbook Pro and used Disk Utility to reformat the drive from the incompatible NTFS it shipped in to a single, Mac OS Extended (Journaled) partition. I then made two folders on the drive, one for Time Machine backups and one for Back to My Mac remote storage/access. Great.
However, when I connected the 2TB drive to my Time Capsule I could not see it at all. Time Capsule was reporting problems in the way of a disk error. From within my Airport Utility, I could see the trouble was the external drive. The utility suggested connecting the drive to a Mac and using it's Disk Utility to troubleshoot.
I followed through, checking the disk, etc. and ended up reformatted the drive on my Macbook Pro yet again with the same specifications as before but without the folders and reconnected it to the Time Capsule. Same deal. But now, I can't even remotely connect to the Time Capsule at all. I can see the Time Capsule in the shared area of my Macbook's Finder but can not connect. The connection tries and fails even before it gets to asking me for username and password credentials.
Long story short, first of all, I suppose I would like to know if I'm asking for the impossible?
Second, if what I want to do *is* possible, what steps do I need to take to make it so?
Thanks in advance for any advice or suggestions you might have.

Well, I have now reformatted/partitioned my poor WD Elements 2TB drive about a dozen times as well as restarted my 1TB Time Capsule so many times it's no wonder it's as confused as I am! <G>
Last night, at your suggestion, William, and in respect for your continued support, I tried creating two 1TB Mac OS Extended (Journaled) partitions on the WD external USB drive, both with GUID partition tables. Both volumes mounted to my laptop's desktop flawlessly and without issue.
Once the external drive was connected to the Time Capsule, however, it was a crap shoot as to whether or not the drive was recognized at all, reporting a problem with the disk, or, even at one point, mounting one of the two volumes but not both. <sigh>
I read somewhere on the Internet that you need to restart the Time Capsule for volumes on an external USB drive to be recognized.
So I tried that. I connected the freshly partitioned/formatted disk to the Time Capsule and restarted it. This succeed in removing the issue of reporting a nameless drive with a capacity of 0MB. It then reported the drive with its correct name but would not recognize whatever volumes in whatever partitions that particular crack at it contained with the exception of the once, as I mentioned above, when only one of two volumes mounted correctly and was listed with the right name and capacity on the Time Capusule's Setup's Disk tab.
At this point I have given up on my goal to use the external drive with Time Machine to back up my Macs or to hope I will ever be able to see its contents remotely via Back to My Mac. All I would like to do now is simply find a reason why I can't get it successfully connected and playing nice with my Time Capsule in the first place!
Any further suggestions or advice as to what steps I might take next would be greatly appreciated.
Thank you all.

SP 13 and SP15 for PI7.0

Similar Messages

Maybe you are looking for