SP and Radio

A local radio station here in Atlanta is taking one of its more popular shows, video taping the show where it is held, a bar and then will upload it to Google and You Tube, perhaps iTunes!
The show was recorded and the sound modified for broadcast, however, because of the additions to the audio track, such a snippets of voices, songs and deletion of certain comments, the track does not match the video. Even the raw audio the engineer modified to some degree to nothing really matches the video. So I am left with a recording of the show provided off the shotgun mic on the PD150 and another device, a lavelier mic which set on the table. So I have a tracks that match the audio but the voice levels are low and the bar noise really drowns the voices except for the moderator who was closest to the mic. I have Soundtrack Pro and have pulled the sequence into the program.
Are the any suggestions from out there as to which effects would give the best overall performance in such a situation? I need to raise the voices but keep the bar noise at a minimum. I know that it will not be as good as if it had the seperate tracks out of the boards, which I will have next time, but any suggestions would be appreciated. Presently I am going through the manual reading.

Hi Myles
I appreciate you did it yourself and hope it worked out well. Could you share with us what your techniques were to minimise background noise?
Thanks
Rounik

Similar Messages

Follow up on JB versionJRO03O and radios i515.10 vFF02/ I515. FG02

JB versionJRO03O and radios i515.10 vFF02/ I515. FG02
The developers i know who have been using this versionof JB and new radios report everything seems to be working great no lost signal or dropped calls
looks to be ready for primetime now we need verzion to push to all . But i suspect S3 will gt JB first
This is an official OTA but only released to those who had 76Q ICS.
With a little research you will see how well it works

Android police is where I have found most with links to the needed
software.
On Sep 6, 2012 9:00 PM, "mariomerendino" <[email protected]>

How to use Checkbox and radio buttons in BI Reporting

Hi BW Experts,
My Client has given a report in ABAP format and the report has to be develop in BI.It contains Check boxes and the radio buttons. I dont know how to use Checkboxes and radio buttons in Bex.For using this option, do we need to write a code in ABAP.Please help on this issue.
Thanks,
Ram

Hi..
Catalog item characteristic
- Data element
- Characteristic type
Entry type
List of catalog characteristics
Designer
Format (character)
Standard characteristic
Alternative: Master characteristic
(used for automatic product
assignment)
Simple entry field
Alternatives:
Dropdown listbox or radio button
list

How to realize Checkbox and Radio Buttons based on Attributes in JHeadstart

Hy@ all,
I try to redevelop the Summit Forms Demo in ADF.
The module "ORDER" contains, among other things, a checkbox and radio buttons based on database columns(VARCHAR2).
The column(checkbox) named PAYMENT_TYPE contains the values CASH and CREDIT and the column(radio button) called ORDER_FILLED contains the values Y and N.
After creating the business components, I set in JHeadstarts Application Definition the Display Type of these two attributes to checkBox and radio-horizontal.
I created a dymanic domain for the radio-horizontal and a static domain for the checkBox.
The radio-horizontal within the dymanic domain works nearly correct.
I set the Data Collection in this dynamic domain to the required Group and the Value and Meaning Attribute to the necessary Attribute.
Within the JSF- Page the values are shown right but unfortunately there are too many radio buttons available. Instead of displaying the two radio buttons CASH and CREDIT were many CASH and CREDIT radio buttons shown.
I can´t find any solution for this case.
The problem with the checkBox is that therfore a static domain is required but I want to show the value of the checkBox based on the described attribute, like the handling of the radio horizontal.
But I don´t know how to implement this, if it is possible.
I´m using JHeadstart v10.1.3.2 and I´m pleased about any reply or solution.
Best regards
Chris

Chris,
If you run the application module tester, and query the view object usage underlying your dynamic domain, how many rows does it return? It should return only two rows, one for CASH and one for CREDIT. If more than two rows are returned, your query is wrong.
What is the problem with using a static domain for the checkbox?
Steven Davelaar,
JHeadstart Team.

How to put Check Boxes and Radio button in Smartforms

Hi all,
How to put check Box and radio button in Smartforms ............ from web properties there is an option to use. But How to use.
regards,
Mohsin

u can declare the checkboxes or radiobuttons whatever in driver program and pass the same to ur form...

SAP SB1 and Radio Beacon

Some one worked before with SAP and Radio Beacon? I have a problem synchronizing the on hand field in both systems. They give me different quantity, at this time the system who gives me the correct quantity on hand is Radio Beacon how I can get SAP has the same quantity and change when the quantity on hand in Radio Beacon canges.
Any idea is good
Albert Torres

Albert Torres,
This has been a known problem with RB for years. I have worked on a few B1 RB projects.
Please take help from the RB support guys
Suda

Euto radio and radio on line fm will not give sound

euto radio and radio on line fm add ons do not give sound the e music has 1 station i like but the station comes in and out so i added 2 more add ons and they don't play sounds the functions seem to work find. i tested a auto sound for my email and that sound works so i am getting sound from 1 add on

That is a firmware issue - please update your phone with the nokia software updater and see if it fixes the problem.

SAP and Radio Beacon

Hello Experts!
If I needed some information on data exchange between SAP and Radio Beacon software what would be the best place to go? What would I start with?
Thank you,
Michael

Thank you, everyone!
I have been to their website. It looks like the program is not open for self-development as much as SAP is...
I would like, for example, to add a user-defined field to an inventory item in RB so it shows if an item was discontinued (Valid box checked off in SAP). However, it looks like adding a UDF would take a whole procedure on the software script level...
Another example would be this digital point issue - when RB works with the whole numbers of units, and the quantities in reality can be fractional...
Thank you,
Michael

Game apps have no sound but you tube and radio is fine

YouTube and Radio app is playing fine through speaker but games app like Plants and Zombies, Cat Toy, Infinity Plade, Angry Birds, KOI Ponds etc have no sound just today :(

No Sound
1. Double-click the Home button and swipe Task Bar to the right
2. Check the volume and mute settings
http://i1224.photobucket.com/albums/ee374/Diavonex/6d3191ba.jpg

"photos" option does not appear in my interface. Do have Music, Movies, TV Shows, Apps and Radio. Photo doesn't appear on iPhone or iPod Nano

"PHOTOS" option does not appear in my interface. Do have Music, Movies, TV Shows, Apps and Radio. Photo doesn't appear on iPhone or iPod Nano

Are you looking at the tabs on the right-hand side of iTunes when you've connected and selected your device on the left-hand side of iTunes ? i.e. it should be one of the tabs that you use to chose what content to sync to the device : syncing photos

Tree structure with checkboxes and radio buttons

Hi,
I am using SNODETEXT as tree structure. On the child node, I need to have checkboxes and radio buttons. Is this possible?

Hi
Muse does not currently have dropdown lists, radio buttons, or checkboxes as part of the forms. You may want to check out using Adobe FormsCentral, Jotform, or Wufoo and inserting them via Object > Insert HTML as an alternative from the Muse forms, as those forms will have the lists, buttons, and checkboxes you're looking for.
Another way if you are publishing your site to Business Catalyst, then you can create forms in BC admin section and copy the form html in Muse page which will render the from that you have created in BC in your Muse site page.
More details :
http://helpx.adobe.com/business-catalyst/using/create-insert-form.html
Thanks,
Sanjit

Problem getting check boxes and radio button to click with applescript

This is my script, it runs through without error, i can see the check box lightly flash like its being focused in on, but it wont actually check mark the box. it does this with all my check boxes and radio buttons.
tell application "Adobe InDesign CS3"
activate
end tell
tell application "System Events"
tell process "InDesign"
tell menu bar 1
click menu bar item 12
key code 125
key code 125
key code 124
key code 125
key code 125
key code 36
delay 1
end tell
tell window "Variable Links"
click checkbox "Use InDesign Tags Filter"
end tell
end tell
end tell

Hi craneium and welcome
For me this script fails, going through it step by step it seems confused, as I have highlighted out in the below code.
where is the window "Variable Links, may be I can help.
tell application "Adobe InDesign CS3"
activate
end tell
tell application "System Events"
tell process "InDesign"
tell menu bar 1
click menu bar item 12 --opens spotlight search in help
key code 125 -- highlights indesign help
key code 125 -- highlights welcome screen
key code 124 -- goes to apple
key code 125 -- goes to about this computer
key code 125 -- highlights software update
key code 36 -- starts software update
delay 1 -- ?
end tell
tell window "Variable Links" -- error cant get window variable links
click checkbox "Use InDesign Tags Filter"
end tell
end tell
end tell
Budgie

I downloaded the new ios7 to my 3rd gen I pad and radio did not download. Anyone else have this problem?

I down loaded IOS7 to my Ipad 3 and Radio did not down load. Anyone else have this happen?

The radio feature is in the music app. And it is only available to those in the US.

When selected preference advance style sheet to zoom. Cheak box and radio looks odd.

In safari 8. After updated OS X to Yosemite. When set preference>advance>style sheet to xxx.css.
In xxx.css contain :
body {
zoom: 110%;
Safari will show checkbox and radio box in all website distortion. As shown below.
Cheak box looks odd and invisible radio box.
Please, tell me. What caused it Or is it a BUG.
Thank You.

Does anyone have a problem it?

I want to buy a dock station with speakers and radio wich can support my ipad2 (30 pin connector) and also my iphone 5 (lightning)

I want to buy a dock station with speakers and radio wich can support my ipad2 (30 pin connector) and also my iphone 5 (lightning). I would be glad to get your help.

If you get the 30 pin dock get an Apple genuine adapter the rip-offs often do not work correctly
If you buy a lightning dock a company called Sandberg makes the reverse adapter ,I have one and it works correctly
As tonefox said i got the sandberg from Amazon

Values of checkboxes and radio buttons not recognised

Hi folks,
I have a bit of a strange problem and I'm hoping you can help shed some light.
Basically I have a form with various elements in it, some of which seem to have a problem telling my pl/sql code what their values are. The culprits seem to be radio buttons and check boxes. Now those are individual items created with the wizard within a specific section if the outcome is different from sql created form elements in tables.
The radio buttons is one field, let's call it :P100_RADIO which returns either 'AB', 'CD' or 'EF'. The checkbox, let's call it :P100_CHECKBOX is just one checkbox returning the value 'Y' if it's checked.
after submit, I have a process which among other things checks the value returned by those two elements to set a variable v_paid either as 'Y' or 'N'
as a small summary of what I'm trying to do, here's a code snippet:
v_checkbox varchar2(1);
v_paid varchar2(1);
begin
v_checkbox := :P100_CHECKBOX;
if v_checkbox is not null AND :P100_RADIO = 'CD' THEN
v_paid := 'Y';
else
v_paid := 'N';
end if;
end;If I submit my form I get the error message
"ORA-06502: PL/SQL: numeric or value error: character to number conversion error"If I change the condition to v_checkbox is not null only, I get the same error
If I change it to v_checkbox != '' I don't get an error but v_paid is set with 'N'
If I change it to v_checkbox = 'Y', I get the same error again
If I change it to *:P100_RADIO = 'CD'* only, I get the error as well.
I also mistakenly tried v_checkbox is null and it submitted fine, though the value of v_paid was still 'N'
I've tried changing the varchar2(1) to something greater, up to varchar2(4000) but that didn't make any difference.
So I seem to understand there's a discrepancy of types somewhere but I can't work out where or how to change that. In my code an insert is performed after the if statement and the value of :P100_RADIO is added to the table with the expected value.
After looking at the source of the page produced by Apex, I also tried to replace :P100_CHECKBOX with :P100_CHECKBOX_0 but that didn't make a difference either. It's possible Apex thinks :P100_RADIO and :P100_CHECKBOX are supposed to return some sort of arrays but just why it would just return a string in an sql statement beats me.
The worst thing is, I'm fairly certain the code worked the first time I implemented it. So if anyone has any idea of what's going on that would be quite helpful. As always, I have a nagging suspicion it's a silly tiny mistake somewhere I just can't see.
Thanks folks :)

okay here's the code for the whole procedure. Some variable names have been changed but it's otherwise the same code:
DECLARE
v_total_cost     NUMBER(10,2);
v_deposit        NUMBER(10,2);
v_remaining      NUMBER(10,2);
v_payment_type   varchar2(2);
v_checkbox       varchar2(4000);
v_user           varchar2(4000);
v_bok_paid       varchar2(1);
v_msg            varchar2(4000);
BEGIN
v_total_cost     := :P100_COST;
v_deposit        := :P100_DEPOSIT;
v_remaining      := v_total_cost - v_deposit;
v_payment_type   := :P100_PAYMENT_AMOUNT;
v_checkbox       := :P100_CHECKBOX;
v_user           := :APP_USER;
--wwv_flow.debug('before condition');
if v_checkbox != '' AND :P100_RADIO = 'CD' THEN
v_bok_paid := 'Y';
else
v_bok_paid := 'N';
end if;
--wwv_flow.debug('after condition');
IF v_payment_type = 'D' THEN
:P100_AMOUNT_TO_PAY := :P100_DEPOSIT;
INSERT INTO SAL_TRANSACTIONS (TRA_BKG_ID, TRA_COST, TRA_TOTAL,TRA_TYPE, TRA_PAID, TRA_PAY_TYPE, TRA_DATE, TRA_MANUAL, TRA_USER)
VALUES (:P100_BKG_ID, 0, v_deposit, v_payment_type, v_bok_paid, :P100_RADIO, SYSDATE, v_checkbox, v_user);
INSERT INTO SAL_TRANSACTIONS (TRA_BKG_ID, TRA_COST, TRA_TOTAL,TRA_TYPE, TRA_PAID, TRA_PAY_TYPE, TRA_DATE, TRA_MANUAL, TRA_USER)
VALUES (:P100_BKG_ID, 0, v_remaining, 'L','N', null, SYSDATE, v_checkbox, v_user);
ELSIF v_payment_type = 'F' THEN
:P100_AMOUNT_TO_PAY := :P100_COST;
INSERT INTO SAL_TRANSACTIONS (TRA_BKG_ID, TRA_COST, TRA_TOTAL,TRA_TYPE, TRA_PAID, TRA_PAY_TYPE, TRA_DATE, TRA_MANUAL, TRA_USER)
VALUES (:P100_BKG_ID, 0, v_total_cost, :P100_PAYMENT_AMOUNT, v_bok_paid, :P100_RADIO, SYSDATE, v_checkbox, v_user);
END IF;
:P100_TRANSACTION_FLAG := '1';
if v_bok_paid = 'Y' then
v_msg := '<div>Message clipped</div>';
--send confirmation email
GLO_CORRESPONDANCE.proc_corr_controller(
:P100_BOOKING_MEMBER_ID,
:P100_BKG_ID,
null,
v_msg,
'E',
'Payment confirmation',
null
end if;
END;Thanks :)

SP and Radio

Similar Messages

Maybe you are looking for