Sp L records are coming to the PSA and not updating in the data target

Special Ledger records are coming to the PSA and not updating in the data target in the month end and the info package is failing - because of that we are doing manual updating from PSA to the data target -
Can so one can tell the reasons why this is happening? And give the solutions to it?

Hi Sankar,
If your Infopackage uses Only PSA and Update subsequently in Data Target on the Processing tab, then you will need to add a process for Read PSA and Update Data Target in your process chain, after the Infopackage load process. Then it will take data from the PSA and load to the data target.
Hope this helps...

Similar Messages

  • Load status in PSA "Request not updated to any data target using delta"

    Hi,
    I need to delete the Unwanted request from PSA with status u201CRequest not updated to any data target using deltau201D
    There are lot of requests are there in PSA but some of them loaded with status
    u201CRequest updated in Data targetu201D u2013 I donu2019t want delete this requests.
    Others u201CRequest not updated to any data target using deltau201D  -- need to delete
    We are deleting manually every week end.
    Is there any program or tables which can delete automatically unwanted u201C Request not updated to any data target using deltau201D requests from PSA.
    Thanks for your help in Advance,
    Raj.

    Hi Rajesh,
    You may create a simple process chain, where you could include the variant "Delete PSA Request".At the bottom of this variant maintenace screen you would find options exactly matching your requirements.It's a very simple option and should not take you more than 5 minutes.
    Best Regards,
    Bansi.

  • PSA showing Request not updated to any data target using delta

    Hi BWers,
    I am very new to SAP and have a IDES installed with BW. I am trying to do a simple data load from a flat file. I have managed to create a InfoPackage, but when I schedule it and then go into the data source -> manage and look at the screen :
    Requests for PSA /BIC/Bxxxx
    I see the Request updated having a Red triangle with an exclamation mark in it and it says
    "Request not updated to any data target using delta"
    Wondering if someone can help me resolve this so that I can further create a DTP and load the data into the InfoObject.
    Thanks for all your help.
    Manish

    Reg : Delta Load : Production Data
    Current Scenario :
    we have existing system pulling data from 0CO_OM_WBS_6 ,ZPS_0CO_OM_NWA_2
    Structure underlying infocube:
    2 Data Sources >> 1DSO >>1 Infocube .
    Usually the Data is loaded in delta format on daily basis using process chains.
    For last one month the delta is not picking properly :
    Example :
    A WBS Element is created 2 years back and it open and getting its update into BW ,
    latest amount or cost incurred for the WBS Element is not picked for certain WBS only :
    I have Tried Giving a Full Infopack load to the DSO , but as DataStructure was migrated from 3.5 to 7 landscape :
    its showing this error:
    Request not updated to any data target using delta,
    i went and created DTP which didnt help much Because latest isnt caputered .
    if i goto RSA1old and find the full req and trigger it ,it says inti overlapping ,
    how to over come this as this is a production issue
    Obaid : pls help me on this issue , any others expert pls help

  • Ajax is caching the output and not updating the page.If you force a second postback after you should have seen a popup (but didn'), you then see popup displayed

    Ajax is caching the output and not updating the page.If you force a second postback after you should have seen a popup (but didn'), you then see popup displayed

    Hey, thanks for replying. It is the user who needs to manually submit the page.
    Basically our page has a hidden div with various text fields and combo boxes. When the user click on specific links on the page, this div is populated and made visible to the user in server side code.
    What happens for all other browsers other than firefox 23 onwards (worked fine in 22) is that after the user clicks on the link, our server side code is executed via a HTTP post. The server then renders the hidden div and sends the additional HTML down to the browser via ASP.NET AJAX.
    With Firefox 23, the additional HTML is not rendered on the first postback. Subsequent clicks of the same link execute the same server side code but the additional HTML is rendered on the browser without issue.
    We've done a lot of debugging now and the issue is localised to a specific third party supplier's (Infragistics) control. I think Firefox 23 must have changed the way that the viewport or screen bounds are calculated or reflected back to this control as the issue seems to stop when we remove the control's MaintainPositionOnScroll attribute. It might be that the Firefox 23 DOM is not able to provide the screen dimensions accurately when the page is first rendered. I say this as the second postback renders the additional HTML fine.
    The control in question is quite an old version so I don't think it's your issue to be honest.
    Just so that this might be helpful to other developers using the Infragistics Window Dialog Control, setting MaintainPositionOnScroll to false solved this issue for us.

  • While running how do I get my podcast to play one song and move to the next and not skip to the next after a few seconds into the song?

    I recently started running and downloaded the Couch to 5K webcasts, while running how do I get my podcast to play one song in it's entirety and move to the next and not skip to the next after a few seconds into the song?  I beleive it's the motion of the running that is causing it, is there a setting I need to change?

    Hello nowrunning,
    Is the "Shake to Shuffle" option turned on in your iPod's settings?  To check, head to Settings -> Music -> Shake to Shuffle and make sure it is set to Off.
    B-rock

  • When I try to edit my payment method it keeps saving the old card and not updating to the new one?

    When I try to edit my payment method it keeps saving the old card and not updating to the new one?

    You likely need to change the default application(s) assigned for opening files to point to the new ones.  HOw you do that depends on which operating system you have. If you search Google you should be able to find out how to change the default programs for different files.

  • Values coming in to PSA but not in to the Data Target

    Hi BW Guru's
    I have done minor enhancement on Master Data Data Source and replicated in BW System the values are coming up to PSA for the particular field but not in to the Data Target.  Can any one help me on this issue. Your help will be appreciated.
    Thanks in Advance,
    Venkat

    Hi Venkat,
    Your datasource has been changed, but infosource and transfer rules - are not.
    So, you'd better delete datasource - infosource assignment. Then replicate datasource again. Activate transfer rules etc.
    Best regards,
    Eugene

  • Request (PSA) was NOT posted successfully to data target (InfoCube)

    In our daily load process chain I am getting an Error Message for "PSA to InfoCube" as:
    Request was NOT posted successfully to data target (InfoCube)
    Message no. RSMPC163
    Please what is the exact problem it means & what is the solution
    Rajesh Giribuwa

    Hello Rajesh,
    This requests fails when updating from PSA to Infocube.
    Pleaes check the update rules for errors.
    Try to find out the exact error message and explore the tabs in monitor for this job.
    Hope this helps..
    thanks,

  • My photos on the iPad and not transferring to the iMac

    I have an iPad with lots of albums on, I have done a recent back up to the cloud and have photo streaming turned on.
    I have just bought a mac and I thought the photos would transfer over from the cloud, but only one of the albums has (album is not the most recent)
    I have plenty of spare iCloud storage.
    Can anyone suggest what the issue may be?

    Have you tried quitting iPhoto, restarting your Mac and resetting your iPad? A fresh start approach, if you will.
    Reset the iPad by holding down on the sleep and home buttons at the same time for about 10-15 seconds until the Apple Logo appears - ignore the red slider if it appears on the screen - let go of the buttons. Let the iPad start up.
    Have you tried using Image Capture instead of iPhoto? Connect the iPad and launch Image Capture. That won't solve any problems that you might be having with iPhoto, but it might let you import the photos to the computer for safe keeping and backup purposes.

  • Maverick has messed up my computer. Slow scrolling in I photo. Bookmark icons are blue all the time and not marked with the company symbols. I cannot find out how to solve this.

    I switched to Mavericks two weeks ago and have had nothing but troubles. Scrolling in I photo is slow and very inaccurate. When I click and drag a photo the ones above it all flicker, making it hard to find where to put it. My bookmarks bar Icons are all blue. Before they used to show the symbol for the company they represented. Now I click on one, it changes to what I want, then a few minutes of hour later, it goes back to the blue ball, which I hate. My font size is different with every page and I have to click Zoom in all the time. I tried adjusting it in Preferences in Advance settings on the right, but this does not solve the problem permanetly. I have one web page, a hockey one, which tries to load, then I get either a black page or a white one. Driving me nuts. I need some help. Been to Apple at the store, talked to them on the phone for four hours last week. Rebuilt the I photo library with no luck. Would appreciate any help. Please Thanks. I even keep a fan behind my computer to keep it cool, that is how much I look after this baby. Some say it might be Safari? Not sure. I have little computer experience, so please it you are kind enough to reply, do not use tech talk or short forms as I will not understand any of it.

    Rick,
    I have a few of your issues as well: 1) Safari popular icons are all bue making them very hard to distinguish from each other. 2) My font size is also different with each page / window.        What I have been able to find out is that in the Maverick OS - Apple removed one size of display resolution 2048 x 1152. Whether this is the cause of my 27" screen clarity & font size issues, I do not know - but it seems like a contributing factor.  Maybe help is on the way - maybe not. Cheers

  • I have the 4s and I updated to the ios6 and it seems like my battery life is shorter ...is this a problem for anyone else?  Are there any fixes?

    I have the 4s and since I updated tithe ios6 my battery seems to run down quicker...anyone else having this issue?  Any fixes?

    http:///discussions.apple.com/thread/4313585?start=0&tstart=150
    http://discussions.apple.com/thread/4310494?start=0&tstart=0
    2 ongoing discussion already on this topic, 2nd link has some suggestions to improve battery life.

  • Texts are coming in as icloud and not cell

    When a friend receives a text from me, it comes across as (my e-mail) and not my cell #.. how do i change this setting? and the text icon is the green cloud icon correct? there isn't a separate icon for texts from your cell?
    <E-mail Edited by Host>

    Settings > Messages > iMessage
    Go to Send & Receive, and check your number is under "YOU CAN BE REACHED BY IMESSAGE AT". Also confirm "START NEW CONVERSATIONS FROM" has your phone number checked.
    But, I think if people send you a text message to your iCloud adddress that's where it will go.

  • IN BOM the Weight and Volume Update from the Parent item when Change Itemca

    Hi  Guru
    we are facing problem when we create SO for Configuration material, By Default all the weight and Volume Flow Proparlly form Material Master for all Parent and Child item  but when we change the item Categries for Child item the weight is copied from Parent Material
    Please give me solution for the above
    Prasanna

    Hi Prasanna,
    Check with weight/volume update in VOV7 for the item category you are using/changing manually.
    Regards
    Jeewnath

  • Error in psa level - Request not updated to any data target using delta

    Hi,
    This is pavan and am facing this issue any one know for below issue to solve.
    Data Flow is BW Version and Implemented in BI  7.20 version.The issue was data has come
    to psa level but from here it is not updated to infocube so for that i have tried update manually
    it is showing information that 1334 SID IS SMALLER THAN / EQUAL TO 47287 CANCELLED.
    In Process Chain DTP is not included so how can i update data to infocube with out disturbing process chain
    Regards,
    Pavan Kumar

    Hi Pavan Kumar ,
    Please log on Tcode RSRQ -then give old request number (I think in your case 1334 is old request number),
    and you will get monitor for that request then change the QM status to red after that load new request .
    Thanks
    Hanumanthu

  • The ios7 is not updating through the computer and when it get half way it says that there is an error. I cannot try through wifi because I don't have the software update tab. If anyone could help it would be good.

    Doesnot work through the computer
    Cannot update through wifi
    There is an error everytime it updated through the computer

    Hello there, Adele102.
    The following Knowledge Base article offers up some great steps for resolving the issue you're describing:
    Resolve iOS update and restore errors in iTunes
    http://support.apple.com/kb/ts1275
    If the issue persists, then this article provides an extensive list of error messages and additional troubleshooting steps:
    Resolve specific iTunes update and restore errors
    http://support.apple.com/kb/ts3694
    Thanks for reaching out to Apple Support Communities.
    Cheers,
    Pedro.

Maybe you are looking for