SP Level required for NW 7.0 Ehp1

Hi,
We are on SAPKB70017, KA -17 and system --> status showing ECC 6.0,
I heard that, if we apply SP stack 19 (Basis -19, abap -19, bw - 21 and PI basis patches ) system --> system will change from ECC 6.0 to SAP EHP 1
Ple clarify this
Regards,
Yash

Hi,
The [Note 1248905 - SP Equivalence for update/upgrade to EHP 1 for SAP NW 7.0|https://websmp230.sap-ag.de/sap(bD1lbiZjPTAwMQ==)/bc/bsp/spn/sapnotes/index2.htm?numm=1248905&nlang=E&smpsrv=https%3a%2f%2fwebsmp202%2esap-ag%2ede] gives a clear picture on the equivalance of SPS in NW 7.0 and NW 7.0 EhP1.
Hope this clarifies you.
Regards,
Varadharajan M

Similar Messages

ECC patch level requirement for SNC 7.0 eph1

We are running ECC SR3 (w/o ehp) now and want to implement SNC 7.0 eph1.
Is there any official docuemnt to which I can refer regarding ECC hot package level requirement for SNC 7.0 eph1? We definately do NOT want to upgrade ECC patch level during SNC project.
If we must switch back to a lower version, such as SNC 7.0, is there a similar document?
Thanks in advance.
James

Dear James
See the SAP SNC Master Guide on SAP Service Marketplace at service.sap.com/instguides @ SAP Business Suite Applications @ SAP SCM @ SAP SNC
For SNC 7.01 go to using sap enhancment package for SAP SNC 7.0
For SNC 7.0 go to using SAP SNC 7.0
https://websmp101.sap-ag.de/support
At the bottom of the page, you can find master guide,
From page 27 section 2.3 Software Component Matrix, it is 90 page document
User details are required plz create one
You will find all the required information
Now if you want to check, realize scenario wise
In the same link, go to release & upgrade information-Product Availability Matrix and Realization Alternatives
THis is very good link
Notes
1180861 & 1281192 talks about 7.0
Best Regards
Vinod

DVD+R DL - "failed to calibrate the power level required for this media"

For the first time since owning our MBP (almost a year) I have tried to burn DVD dual layer discs. I get the error message that says the "device failed to calibrate the power level required for this media"
I have searched the web and this discussion forum and see many people have the same situation.
I am simply trying to burn 7GB of data in the finder onto my disc.
I am running 10.5.2, and have tried both Fuji and Memorex discs with no success. I am a little ****** off since the discs aren't cheap...
Do I need to get my DVD burner replaced or is this a software / media issue?
Any help very much appreciated. (& the international settings tweak that worked for some did not work in my case.)

I found the fix to this problem. I tried the trick with changing the languages and it didn't work for me. After hearing the success stories from other people using the language trick I realized that calling apple and getting my superdrive replaced won't do the trick. My superdrive burns CD and 4.7Gb DVD without any problems but when I try to burn DL it shows the message "failed to calibrate". Here's the temporary solution to the problem (it worked for me)
Create a new account
Change the language to something other than English (I speak Russian so Russian worked for me).
I know that it may not work for some of you guys but give it a shot. Hopefully Apple will fix this software bug in the next update.

Topic : "failed to calibrate the power level required for this media

I notice that other people have had this problem but they have only mentioned problems when burning DVDs. I've been having this problem burning CDs and on my MBP which uses OSX 10.4.1.1. Any ideas anyone please?

Use better or at least different, media. Verbatim to start with, see if that helps.

Hardware requirements for BOE XI 3.1

Hello,
I am looking for the hardware requirements to install BOE XI 3.1, but could not find any information in Installation guide as well as deployment guide.
The information given is something like below, but if I click the link it will be redirected to SAP service market place.
================================================
System requirements
For a detailed list of supported environments and hardware requirements,
consult the Products Availability Report (PAR) document available on the
Business Objects support site http://support.businessobjects.com/documen
tation/supported_platforms. This document includes specific version and
patch-level requirements for web application servers, web browsers, and
operating systems. For information related to the planning of a
BusinessObjects Enterprise deployment, consult the BusinessObjects
Enterprise Planning Guide.
================================================
Where can I get the correct document?
Thank you in advanced!
rgs,
Hiroshi

Hi,
go to [http://service.sap.com/bosap-support] and navigate to Documentation->Supported Platforms->BusinessObjects XI 3.1
Keep in mind that what you see there are the minimum HW requirements. And if you are planing on deploying BOBJ on a virtual machine, make sure that it gets enough CPU and RAM and that the disk I/O on the host has a decent throughput.
Regards,
Stratos

Business Package for SRM 7.0 EHP1

Dear `SRM Gurus,
What is which SRM business package version required for SRM 7.0 EHP1
Reagrds,
Vinod

It is BP SRM 7.01

Requirement for getting the Inventory at a daily level (Non-cumulatvev KF)

Hello All,
Kindly provide ur suggesstions on the issue mentioned below:
We require the Inventory data at a daily level. Also we require that the non-cumulatve Key Figures such as 0TOTALSTOCK, etc. be available to us in the BW itself, since this is required for further processing.
PS: Right now we are using RSCRM_BAPI to execute the qurey and store the data into a table, but it fails for non-cumulative keyfigures. Kindly suggest if ther are other ways which can suffice the requirement mentioned above.
Thank you.
Regards,
Kunal Gandhi

Hi Kunal,
I've just answered your other post about the same issue. You shouldn't open 3 threads with the same question.
If there is something that is not clear, you can just reply there.
Regards,
Diego

Two production orders at the header level one for one single requirement

Hi Gurus, Please provide me your valuable suggestion on the issue.
*Client wants to have a only two production orders at the header level one for one single requirement .*
1) Manufacturing Order u2013 In this order for Finsihed prodcut system should pick all the assemblies whcih are manufactured inside i.e depending on the material type.\
2) Assembly order u2013 In this order system should pick all the assemblies whicih need to be assembled also procured or subcontracted items in this order against depending on the material type.
It means for Sales order of 5 EA there is going to be only 2 order ( MFG & assy order).
For Example.
L45-7000 is the header material now client wants only two production orders one Manufacture order and anothe Assmebly order , thet dont want to use Phantom assembly concept and also multiple production orders for SFG.
Please confirm if this requirement can be mapped in SAP ?
Thanks...

Hi Shishir,
As soon as each order is related to only one material, if your manufactured (or purchased) assemblies are of different materials, you will have a separate order for each material rather than a single order for all manufactured assemblies. I don't thing all your assemblies are of the same material - thus I would say no, it is not possible to map your requirement.
Regards,
Sergiy

High level description of why an Enterprise Admin account is required for DirSync config

Hi all,
I understand that as part of the Azure AD Sync tool config wizard you are required to enter the credentials of an Enterprise Admin account. These credentials are required for the creation of the MSOL_AD_Sync service account within the Users OU of Active
Directory. This account is granted read and synchronization permissions to the local Active Directory.
Is someone able to provide a high-level description of what this actually means i.e exactly which permissions are granted and on which objects. Are we talking about having to modify the permissions of every single object within Active Directory?
Many thanks in advance,
Graham

Hi,
To start with, I guess you would know that this is a Kind of a Temporary.
I have some details from previous conversations and blogs
Hope this puts some light on your query.
When configuring the Microsoft Online Services Directory Synchronization Tool, you are asked to provide the credentials for an account that has
Enterprise Admin permissions on your organization's local Active Directory directory service. It accepts credentials in either of the following forms:
[email protected]
Example\someone
These Enterprise Administrator credentials are not saved. They are erased from the computer's memory after the service account is created.
How the Active Directory Credentials Are Used
The Microsoft Online Services Directory Synchronization Tool Configuration Wizard uses the Enterprise Admin credentials to create the directory
synchronization service account, MSOL_AD_Sync. This service account is created as a domain account with directory replication permissions on your local Active Directory and with a randomly generated complex password that never expires.
Note:
Changing the password associated with the service account is not recommended.
How the Service Account Is Used
When the directory synchronization service runs, it uses the service account credentials to read from your local Active Directory and write to the
synchronization database. The contents of the synchronization database are written to Microsoft Online Services using the Microsoft Online Services credentials requested on the
Microsoft Online Services Credentialspage of the Microsoft Online Services Directory
Synchronization Tool Configuration Wizard.
Note:
If you add a domain to your Active Directory forest, you must run the Microsoft Online Services Directory Synchronization Tool Configuration Wizard
again to add the new domain to the list of domains to be synchronized.
Thanks & Regards
John Chris

Storage raid levels are required for ASM?

Storage raid levels are required for ASM? Can we have both storage and asm level of raid configuration on the server?

Handle:      user530956
Status Level:      Newbie
Registered:      Sep 15, 2006
Total Posts:      59
Total Questions:      26 (26 unresolved)
So many questions, without ANY answers.
http://forums.oracle.com/forums/ann.jspa?annID=718
Can we have both storage and asm level of raid configuration on the server?YES

Russian Federation Lync Requirements for Encryption Levels

Anyone know of any Russian Federation restrictions on operating Lync in Russia? Any concerns on encryption? Any there any Lync security setting to be aware of for supporting Lync clients in Russia. Configuration is a Hosted solution with
and Enterprise Pool outside the country of Russia and Clients in Russia. I can only think of restrictions on Voice where we need local break to the local telco for PSTN.   I am mostly concerned with Russian federation requirements
for lower Encyption levels that Lync 2013 does not support.   Any thoughts??

Im sorry I should have left the word "Federation" out of the questions. It was confusing.   My question has to do with Encryption Levels running in Russia? For Encyption do you have to minimize the Encryption Levels in Lync to be
allowed to operation Lync in Russia? Or is Microsoft a licensed vendor to run full 128 bit encryption in russia? Anyone know of any limitations of running Lync in Russia? Do you have to turn off Encryption using the Set CSMediaConfiguration
cmdlet:
If the
EncryptionLevel setting in Lync Server (Set-CsMediaConfiguration) is manually configured to
DoNotSupportEncryption then media will not be encrypted (SRTP will not be used).
Thanks,
Don.

Complex alternative qualifications/requirements for job/position level

Dear collegues,
I've faced a problem when assigning job qualifications.
The Client (State Authority) has experience requirements for jobs/positions something like this:
Ex. for Committee Director position requirements are:
5 years of general experience, including 1 year in state authorities OR
4 years of general experience, including 1 year in state authorities after finishing government study programme - Western Bachelors degree OR
3 years of general experience, including 1 year in state authorities after finishing government study programme - Western Masters degree OR
3 years of experience in State Authorities OR
6 years of general experience, including 2 years on Executive positions OR
3 years of general experience if having Doctors degree
So, we have 6 alternative bundles of requirements for the position, which contain several requirements in itself.
Is there a possibility to make qualification blocks alternative?
Or any other suggestions please?
It broke my brain today))
thank you,
best regards,
Yevgeniy

Thanks for the confirmation Yevgeniy.
First thing that organization has to plan is: alternative qualification mapping for scales which can be easily read and considered for all process front like Recruitment, Hiring, building Competency Mapping, Performance Management, and Learning Management. This requires a complete change management process as to how to manage Job Family Architecture would fit the organization and it's organizational structure based on Position and Qualification.
For all the alternate qualifications they have; you need to simply build a scale as Option 1, Option 2, Option 3, etc and each position qualification description will be held in position description rather in Personnel Development.
Therefore, QK would be called as Experience and Q would be Relevant Experience with Scales attached as Option 1, Option 2, Option 3, Option N... etc. I still don't know what Option 1, Option 2... Option N... could be described as and you can write small description for each options as well (SuccessFactors have scales which can hold large texts as well, but in SAP the text width in scale level is limited).
If you patch up with client on this approach, they can help you out. We have succeeded this approach to one of my engagement as Qualification via Job / Position Architecture.
The advantage of this approach is: Only the scale is configurable, the rest is masters which can be changed or overlooked anytime. With reference to your context, all the data structures should be managed as masters rather custom or configurable as it would lead to inconsistency on a longer run.
Hope this helps. Do let me know if you still need any clarifications. Thanks in advance.
Regards,
Saravana Gopalan
Senior Business Consultant - Human Capital Management
SAP Service Line | Cloud Computing (SuccessFactors / Etc)
E/ [email protected]

What level of certification is required for ECC 6 upgrades?

Hi everyone,
I'm already a ceritifed SAP technology consultant (up to NW2004), however need to update my certification for ECC 6 (netweaver 7).
What is the appropriate exam to sit (eg associate or professional) to be allowed to perform productive SAP ECC 6 upgrades?
Thanks
Shaun

Hi everyone,
Major update on the "do you need to be certified" topic ...
I finally got a reply from SAP Education regarding two queries I had regarding what level of certification was required as a basis "guy" to perform production SAP installations and upgrades.
SAP Education wrote:
You don't need to be certified to do installations. In reality, customers will have much more comfort having an install done by someone who is certified rather than someone who isnu2019t, but ultimately itu2019s the customeru2019s call.
I then asked if this was applicable for SAP upgrades also ...
SAP Education wrote:
Hi Shaun,
Indeed it is.
Best of luck!
I then went on to clarify that their is no support implications for customers who don't you certified Basis personel to perform their upgrades/installs:
Shaun wrote:
So your saying that although itu2019s preferable to be certified ... you donu2019t have to be, and there is no impact to the support provided by SAP?
SAP Education wrote:
Ultimately, SAP cannot mandate for individuals (excluding those employed by SAP) or SAP Partners to be certified to work on projects. However, customers and partners will employ the consultants to work on the projects, from what we have seen recently customers and partners are now asking for SAP certified consultants to work on implementation and upgrade projects.
Thus we suggest to have an advantage to be employed on future SAP projects that you are certified in the solution you will be working on, or upgrading to.
Example: If you are looking to work on an upgrade from CRM 5.0 to CRM 7.0 the customer would look for certified consultants in CRM 7.0
So it is solely up to you if you wish to certify yourself in the latest release of the solution you are working in.
I then rang SAP education and had a very pleasant discussion with one of the ladies there. She went on to explain that the requirement for certification really became an optional thing a few years back. SAP was no longer in a position not to support customers regardless of who they use to perform their upgrades/installs since a customer continues to pay their yearly maintenance costs - thus SAP is obligated to provide support.

Media list required for PI 7.1 including EHP1 for AIX, DB2.

I am in the process of downloading software for PI7.1 including EHP1. But I identified below two links in service market place. Which is one is the correct link for getting combined pack of PI 7.1 including EHP1 for fresh installation?
https://websmp208.sap-ag.de/~form/sapnet?_SHORTKEY=01100035870000620973&_SCENARIO=01100035870000000202&
SAP Netweaver PI 7.1
SAP EMP1 for SAP NW PI 71
I think that we can install PI 7.1 including EHP1 directly without installing 7.1 first and after EHP1. Is this correct?
If anybody have media list for PI 7.1 including EHP1 for AIX & DB2, please share.
Regards
Sudhakar

Hi,
Yes, you can directly install PI 7.1 including EHP1 directly.
For media list, check below link:
https://websmp202.sap-ag.de/~sapidb/011000358700000327472009E
Thanks
Sunny

Steps required for second level approval Workflow

Hi,
Can any one explain me step by step procedure of how to configure 2 level approval process in SRM.I have activated the second level approval for SC.But after this what i have to do. Where can i set the value conditions in workflow?How system will decide for one level approval it has to go for a person "Y" and for 2nd level approval it has to go to Manager?
kindly help me out in this
regards
subbramanyam

I think you have to activate the below workflows in the system which automatically identifies the number of levels that it should cross.
WS14000133
WS10000049
WS14000134 ---> This Sub workflow determines, is there any next approver or not?.

SP Level required for NW 7.0 Ehp1

Similar Messages

Maybe you are looking for