SP M10 and port Replicator

Hi !
Have a SP M10 and port replicator and before it switched the screen res. by it self. In the port replicator = 1200*xxxx, outside port replicator = 1600*xxxx. Now it don't switch bu it self. What need i do to make it work again. Hope you understand my question.
/Rob

Hi Rob
It is always very strange if someone write now it not works. Usually there must be some reason for this. Did you make anything or change some settings?
If nothing can help, try to reinstall Toshiba Mobile Extension utility.

Similar Messages

  • X300: External Monitors and port replicator

    The X300 looks really good, but when not traveling I'd be using it with a 24" 1920x1200 monitor.
    A couple questions I can't see to find answers for:
    1)  Is the X300 capable of driving that resolution for an external monitor?
    2)  Assuming a good answer to #1, it seems like the new USB-based docking station has an resolution of 1440x or 1400x.  Can the replicator be used, but skip using the video out and, instead, just use the video out from the X300?
    Using the port replicator may not make sense that way since I might as well just plug everything in manually, but wanted to ask.
    Thanks in advance for any help/clarity around this.

    ed, it's an obvious question with a not-so-obvious answer.   the specs actually come from intel's published info on the X3100 integrated graphics.   for whatever reason lenovo doesn't list their systems' output capabilities in easily-accessible documentation.   not even the X300 topseller announcement letter mentions display output.   i've never understood this as it would clear up many customers' questions and uncertainties.
    this makes a thinkpad's ability to output high resolution is a perpetually-confusing topic.   to help put things in perspective, it takes only 12MB of video memory to drive 2048x1536 @ 32-bit and only 9MB to drive 1920x1200 @ 32-bit.   the X300 with its ability to use up to 384MB of shared system memory can easily drive two displays simultaneously within the VGA limitations on each port; 2048x1536 on-board and 1400x1050 via the port replicator.
    update: fixed typo.
    Message Edited by erik on 05-05-2008 02:19 AM
    ThinkStation C20
    ThinkPad X1C · X220 · X60T · s30 · 600

  • T61 and port replicator with 2 monitors

    I have a T61, 6460-66U, connected to a port replicator. My laptop stays closed and out of sight. I have a Y connector going from the analog video port to each of the LCD monitors. The displays work, but they are clones of each other. I want one to be the main monitor and the other to be the extended desktop. The video card in this T61 is a Nvidia Quadtro NVS 140M. Please help!

    Guybak, welcome to the forum,
    I'm not sure it will work with a Y connector. I've never tried it so you are more than welcome to prove me wrong
    What will work is attaching one screen to the VGA and the other to the DVI on the Mini-Dock. You can then create a profile in Presentation Director where you must disable the ThinkPad screen in order for it to work. I decribed it in this thread, but unfortunately the member never came back to say it worked for them, I must presume yes.
    Andy  ______________________________________
    Please remember to come back and mark the post that you feel solved your question as the solution, it earns the member + points
    Did you find a post helpfull? You can thank the member by clicking on the star to the left awarding them Kudos Please add your type, model number and OS to your signature, it helps to help you. Forum Search Option T430 2347-G7U W8 x64, Yoga 10 HD+, Tablet 1838-2BG, T61p 6460-67G W7 x64, T43p 2668-G2G XP, T23 2647-9LG XP, plus a few more. FYI Unsolicited Personal Messages will be ignored.
      Deutsche Community     Comunidad en Español    English Community Русскоязычное Сообщество
    PepperonI blog 

  • Portege R600-Q10 and Port Replicator II

    Hello! I have a small problem....I had Toshiba Porteble R500 and PRII but now I can't find this laptop in my country.
    So I'm thinking about Toshiba Porteble R600-Q10 but i can't find does it work on PRII.
    I know that PRIII is OK but I dont wonna buy new Port Replicator.....
    Matt

    I am afraid with this notebook model you can use slim port replicator III onlu.
    Check it HERE .
    http://laptops.toshiba.com/accessory/PA3681U-1PRP

  • Cannot connect 2 external monitors via port replicator using Portege Z30-16U

    Hi All
    I need hell I just moved from a other laptop to the Portege Z30-16U, I have spent hours trying to connect my 2 external monitors to my Hi-Speed Port replicator III 120W but my laptop will only see one monitor.
    I have been using 2 external monitors with my laptop for yrs as I do a lot or reading and I do not want to use only one and the laptop screen.
    I have tried VGA cables and mix of a VGA and a HDMI but nothing is working.
    Can anyone tell me how I can connect and view 2 external monitors with this laptop and port replicator, I cannot believe it is not possible it would make no sense that Toshiba would be so technilogically behind other laptop manufacturers.
    Thanks
    Liga

    Hi
    I am not familliar with the Portreplicator of Z30, but the general behaviour of the dual-displayconnector replicators is that 1 can be used.
    Not 2 simultaneously.
    I may be wrong and you should easily be able to check this - use only 1 at a time.
    First one, then the other.
    If both works when used alone, then my suspicion is right.
    Hope this helps!
    BR TOm

  • Tecra S1 shuts down when using Port Replicator III

    Hi,
    Ive got a problem with a Tecra S1 Notebook and Port Replicator III. When I dock the Notebook onto the station, it turns immediately off. It doesnt matter if Im in Windows or not. The same Notebook works in a Port Replicator II without any problems. My first thought was, that the Replicator III may be damaged, but I testet it with another Tecra S1 and it worked! Can somebody help me with this???
    Thx a lot!
    Mathis

    Hi,
    is all responsible Toshiba software for the Port Replicator III installed in a right way or do you use it with the "old" versions from the Port Replicator II?
    Try to update the software, tools and drivers from toshiba homepage! Then I think it should work!
    Bye

  • X1 and USB Port Replicator with digital video - hangs system

    Hi
    with the X1 to help with docking it everyday at the office I have a USB Port replicator with digital video. I am not using the digital video but the USB ports, head phone and mics plus ethernet.
    When I plug it in it detects it OK, I then installed the software. But after reboot it looks to stall when logging into windows, screen flickers back and forth and locks up the operating system. I unlplug it and reboot and window is working fine.
    Note as I mentioned I am not using the digital output but instead using an external monitor via the display port on the back of the laptop.
    Also its is very slow to boot (Lenovo bios splash screen is there for about a minute)
    I have gone into the bios and turned off all other bootable devices just leaving the laptops hard drive.
    As a work around I have removed the software and I am getting the basic functionality of the port replicator, but not the ethernet.
    I have run the update manager but does not appear to show a need to update the drivers.
    Model X1 (1293-CTO)
    Windows 7

    Hi, I have this same exact problem.
    Video (anything from youtube to downloaded shows, movies) will freeze for 5-7 seconds at a time. The sound continues to play while the video is 'frozen', and the video resumes after that.
    It will happen on its own, with no bumping, but it is more prone to happen if I do something like increase the volume within the media player.
    Any suggestions are much appreciated!

  • Lenovo USB 2.0 Port Replicator Freezes Issues and Problems

    Okay, I have THREE of these port replicators in my office, and ALL THREE have the exact same problem on various laptops(X1, T420, Edge 13) with various kayboard/mice.  I've been through all stages of the port replicator drivers on the various systems, and the issue is always there.  All laptop drivers are updated.
    Here is the issue: working away, and then bam, mouse and keyboard don't work.  I'm working in a external monitor only display setup.  I go to the keyboard/touchpad on the laptop and they don't work...however ctrl+alt+delete works on the laptop keyboard(not the regular one).  Then the touchpad works...but I can't click on any of the settings EXCEPT sleep.  When I press a button to wake it up, everything works fine.  Basic external keyboards/mice, no need for different drivers.
    The other thing that fixes everything is unplugging the USB connection from the port replicator and plugging it back in to the laptop(or unplugging the power to the port replicator). 
    The weird thing is that I took the keyboard and mouse and they are plugged into the laptop itself, NOT the dock, and I still get the same issue with responsiveness.  This happens on ALL the docks, so it's not a keyboard/mouse driver thing. 
    The one thing that's occuring to me is that maybe it's a weird display issue?  I haven't tried actually using the external or laptop keyboard to run commands while it's frozen...and I also haven't tried unplugging things from the port replicator one by one (such as unplugging the display cable from the port replicator, then the printer, then the ethernet).  I'll keep you updated if I get any further.  It's been like this for months, and my users are just doing the workarounds.  one thing is for sure...
    I'M NEVER GOING TO SUBSTITUE THIS PORT REPLICATOR FOR A NORMAL DOCK AGAIN! (although i have no choice with the X1). 

    Hi skrasher, welcome to the forum,
    could you please try the following to see if it changes the behaviour of the USB ports.  In Device Manager, with the port rep attached, disable the ability on each of the USB Root Hubs for Windows to disable the device in order to save power, restart the system and see if the problem still occurs.
    Let us know how you get on.
    edit; for clarity
    Andy  ______________________________________
    Please remember to come back and mark the post that you feel solved your question as the solution, it earns the member + points
    Did you find a post helpfull? You can thank the member by clicking on the star to the left awarding them Kudos Please add your type, model number and OS to your signature, it helps to help you. Forum Search Option T430 2347-G7U W8 x64, Yoga 10 HD+, Tablet 1838-2BG, T61p 6460-67G W7 x64, T43p 2668-G2G XP, T23 2647-9LG XP, plus a few more. FYI Unsolicited Personal Messages will be ignored.
      Deutsche Community     Comunidad en Español    English Community Русскоязычное Сообщество
    PepperonI blog 

  • Port Replicator loses connection to 2 external monitors and moves all the windows to the main screen

    I recently purchased a Lenovo USB 2.0 Port Replicator with Digital Video (0A33942) to use with my Lenovo ThinkPad E530 laptop and two external monitors. One of the monitors is plugged into the port replicator with a VGA cord and the other one is plugged in directly into the laptop also with VGA.
    The issue I'm having is randomly during the day, both screens will go blank, when they come back up everything that was open on the second screen gets moved to the main one. This happens about 15 times a day and although not a life threatening issue, it's still more of an annoyance moving everything back to the second screen as it was originally set up.
    I have gone to Power Options and I have switched the sleep mode to 'Never'. Anyone have any suggestions? This is really driving me nuts. I tried calling Lenovo support and they told me this wasn't in "their scope" of support issues.
    Thanks

    this is a driver incompatibility issue, it happens with some displaylink devices. I had this problem with the Lenobo USB 2.0 port replicator before.
    Since the E530 has USB 3.0, i suggest you get a Lenovo's USB 3.0 dock, which will support 2 external LCD (but only one of the dvi on the dock can be converted to vga).
    Regards,
    Jin Li
    May this year, be the year of 'DO'!
    I am a volunteer, and not a paid staff of Lenovo or Microsoft

  • Enhanced USB port replicator 43R8811 and dual monitor

    I have problem with USB port replicator. I cannot put a right resolution to monitor (wide screen monitor). Replicator's settings say that I can use up to 1280x1024 resolution but monitor support i.e. 1400x1050 resolution which port replicator should support by user manual.
    If I put monitor direct to my X300 laptop I can use monitor's right resolution (1680x1050).
    Is it drivers problem or what that I cannot put a right settings?
    -Paul-

    I'm having trouble understanding your phrasing.
    The Enhanced USB Port Replicator I recently purchased supports 1440x900 and can be configured to do so.  I did have to install the drivers by downloading from the web (they were provided on a CD -- convenient since my laptop came with no CD/DVD drive :-).  Once the drivers  were installed, it happily suports 1440x900.  Did you already install the software?  Older versions of the port replicator don't support above 1280x1024, but that should not be the case with the Enhanced one.
    So you should be able to set any resolution up to 1440x900.
    Of course "1400x1050" would be a higher resolution than 1440x900, and thus not supported right?

  • Port Replicator (45K1610), x301, and resolution help

    I have a x301, a port replicator with model number 45K1610, and a Dell 22" wide screen monitor.  When I connect the monitor directly to the laptop I can get the max resolution of 1680x1050 out of the monitor but when I plug the monitor through the port replicator I can only get a max resolution of 1440x900.  We have some customers here that what to run the monitor through the port replicator and have it mirror the laptop with the resolution of 1680x1050.  I have not been able to find a way to do this and according to the specs of the port replicator it is capable of pushing a resolution greater than the 1680x1050.  Anyone have any idea on how to get this to work?  Thanks.

    I am having the same issue. For some reason, mirroring will only match the max laptop resolution on the external display. I have a 24" monitor that can display 1080p. I need to get the external display to AT LEAST 1600x1200.
    I understand the you can extend to the external display, but I am unable to set the external display as the primary monitor (move the start button, taskbar, etc) to the external.

  • Port replicator and dual displays

    Stupid question alert - if the machine stands straight up in the replicator, how do you use the display in a dual configuration?  Also, you still need toplug a USB cable in?

    Sorry can you explain what you mean if the machine stands straight up in the replicator? Also, which machine are we talking about here and the model of the port replicator?
    Regards,
    Jin Li
    May this year, be the year of 'DO'!
    I am a volunteer, and not a paid staff of Lenovo or Microsoft

  • Port replicator and volume controls

    hi - i have a new USB port replicator hooked up to my T42 Thinkpad. I plugged my external speakers into the port replicator's headphone jack. The speakers work, but now the volume controls on my laptop don't do anything. I have to make any volume adjustments using the controls on the speakers themselves. Anything I can do about this? Thanks for your help.

    ok, thanks for you answer. maybe "port replicator" was the wrong term.
    actually, I have this: 
    I have 2 docks like that at my office. P/N I have are 0B56232 and SD20A23326 (FRU: 04Y2072 and 04W3587)
    the reference (433615W) mentionned on my previous message was wrong. 
    I have the same port between the yellow port and the white port, and it looks like a display port (?)
    and, I have just an other question about these docks: do I have to shut down or hibernate the machine before taking them off the dock (with usb devices plugged on the dock)? I think so but I'm not sure.. thanks

  • Help - T42p and Lenovo Enhanced Port Replicator does not external monitor

        T42p  Win Xp SP2  2GB Memory ATI Mobility Fire GL T2
    I had an old style port replicator that supported my ThinkVision 17" flat panel monitor.  The port replicator died and I got a replacement  - Lenovo Enhanced port replicator.  If I go to the Control panel/Display it now shows 3 monitors and when I try to enable #2 or #3 it takes the extend my desktop setting but when you press the identify button it only recognizes #1 (my T42).  My external monitor is blank..............any ideas where to start?

    No, I could not get help from any place. I did some research on my own and realized that the Lenovo port replicator (with Lenovo name on it) is actually theTargus ACP50 which is sold as a universal port replicator. The difference is that the Lenovo unit has a driver specific to Lenovo. I even went to Targus website and download their latest “generic” driver. The driver worked with the Lenovo computer fine, but still does not resolve the issues that you and I see. So I concluded that it is the port replicator crappy design.

  • Firefox does not paint the window if Windows 7 Basic theme is selected and Fujitsu USB port replicator PR07 is used

    If I use "Windows 7 Basic" theme on my laptop (Fujitsu Lifebook A532), the Firefox window is not painted.
    I see only the border of the window, the content not. As soon as I switch back to the "Windows 7" theme,
    it works again.
    It could be related to the graphics driver (from Intel) of my new laptop.
    Before I had a desktop computer, and did not have this problem.
    Update: the problem occurs only if I use my port replicator (Fujitsu USB Port Replicator PR07).
    If I unplug the replicator, and use only the monitor of my laptop, everything is fine.

    ''When you figure out what's causing your issues, please let us know. It might help other users who have the same problem.''Please create a screenshot of the problem you're seeing by following the guide mentioned at [[How do I create a screenshot of my problem?]].
    Once you've done this, attach the saved screenshot file to your forum post by clicking the '''Browse...''' button below the ''Post your reply'' box. This will help us to visualize the problem.

Maybe you are looking for